1 /* 2 * Copyright (c) 2016-2018 Mellanox Technologies. All rights reserved. 3 * Copyright (c) 2016-2018 Vadim Pasternak <vadimp@mellanox.com> 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the names of the copyright holders nor the names of its 14 * contributors may be used to endorse or promote products derived from 15 * this software without specific prior written permission. 16 * 17 * Alternatively, this software may be distributed under the terms of the 18 * GNU General Public License ("GPL") version 2 as published by the Free 19 * Software Foundation. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 25 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 31 * POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34 #include <linux/bitops.h> 35 #include <linux/device.h> 36 #include <linux/hwmon.h> 37 #include <linux/hwmon-sysfs.h> 38 #include <linux/i2c.h> 39 #include <linux/interrupt.h> 40 #include <linux/module.h> 41 #include <linux/of_device.h> 42 #include <linux/platform_data/mlxreg.h> 43 #include <linux/platform_device.h> 44 #include <linux/spinlock.h> 45 #include <linux/regmap.h> 46 #include <linux/workqueue.h> 47 48 /* Offset of event and mask registers from status register. */ 49 #define MLXREG_HOTPLUG_EVENT_OFF 1 50 #define MLXREG_HOTPLUG_MASK_OFF 2 51 #define MLXREG_HOTPLUG_AGGR_MASK_OFF 1 52 53 /* ASIC good health mask. */ 54 #define MLXREG_HOTPLUG_GOOD_HEALTH_MASK 0x02 55 56 #define MLXREG_HOTPLUG_ATTRS_MAX 24 57 #define MLXREG_HOTPLUG_NOT_ASSERT 3 58 59 /** 60 * struct mlxreg_hotplug_priv_data - platform private data: 61 * @irq: platform device interrupt number; 62 * @dev: basic device; 63 * @pdev: platform device; 64 * @plat: platform data; 65 * @regmap: register map handle; 66 * @dwork_irq: delayed work template; 67 * @lock: spin lock; 68 * @hwmon: hwmon device; 69 * @mlxreg_hotplug_attr: sysfs attributes array; 70 * @mlxreg_hotplug_dev_attr: sysfs sensor device attribute array; 71 * @group: sysfs attribute group; 72 * @groups: list of sysfs attribute group for hwmon registration; 73 * @cell: location of top aggregation interrupt register; 74 * @mask: top aggregation interrupt common mask; 75 * @aggr_cache: last value of aggregation register status; 76 * @after_probe: flag indication probing completion; 77 * @not_asserted: number of entries in workqueue with no signal assertion; 78 */ 79 struct mlxreg_hotplug_priv_data { 80 int irq; 81 struct device *dev; 82 struct platform_device *pdev; 83 struct mlxreg_hotplug_platform_data *plat; 84 struct regmap *regmap; 85 struct delayed_work dwork_irq; 86 spinlock_t lock; /* sync with interrupt */ 87 struct device *hwmon; 88 struct attribute *mlxreg_hotplug_attr[MLXREG_HOTPLUG_ATTRS_MAX + 1]; 89 struct sensor_device_attribute_2 90 mlxreg_hotplug_dev_attr[MLXREG_HOTPLUG_ATTRS_MAX]; 91 struct attribute_group group; 92 const struct attribute_group *groups[2]; 93 u32 cell; 94 u32 mask; 95 u32 aggr_cache; 96 bool after_probe; 97 u8 not_asserted; 98 }; 99 100 static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv, 101 struct mlxreg_core_data *data) 102 { 103 struct mlxreg_core_hotplug_platform_data *pdata; 104 105 /* Notify user by sending hwmon uevent. */ 106 kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE); 107 108 /* 109 * Return if adapter number is negative. It could be in case hotplug 110 * event is not associated with hotplug device. 111 */ 112 if (data->hpdev.nr < 0) 113 return 0; 114 115 pdata = dev_get_platdata(&priv->pdev->dev); 116 data->hpdev.adapter = i2c_get_adapter(data->hpdev.nr + 117 pdata->shift_nr); 118 if (!data->hpdev.adapter) { 119 dev_err(priv->dev, "Failed to get adapter for bus %d\n", 120 data->hpdev.nr + pdata->shift_nr); 121 return -EFAULT; 122 } 123 124 data->hpdev.client = i2c_new_device(data->hpdev.adapter, 125 data->hpdev.brdinfo); 126 if (!data->hpdev.client) { 127 dev_err(priv->dev, "Failed to create client %s at bus %d at addr 0x%02x\n", 128 data->hpdev.brdinfo->type, data->hpdev.nr + 129 pdata->shift_nr, data->hpdev.brdinfo->addr); 130 131 i2c_put_adapter(data->hpdev.adapter); 132 data->hpdev.adapter = NULL; 133 return -EFAULT; 134 } 135 136 return 0; 137 } 138 139 static void 140 mlxreg_hotplug_device_destroy(struct mlxreg_hotplug_priv_data *priv, 141 struct mlxreg_core_data *data) 142 { 143 /* Notify user by sending hwmon uevent. */ 144 kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE); 145 146 if (data->hpdev.client) { 147 i2c_unregister_device(data->hpdev.client); 148 data->hpdev.client = NULL; 149 } 150 151 if (data->hpdev.adapter) { 152 i2c_put_adapter(data->hpdev.adapter); 153 data->hpdev.adapter = NULL; 154 } 155 } 156 157 static ssize_t mlxreg_hotplug_attr_show(struct device *dev, 158 struct device_attribute *attr, 159 char *buf) 160 { 161 struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(dev); 162 struct mlxreg_core_hotplug_platform_data *pdata; 163 int index = to_sensor_dev_attr_2(attr)->index; 164 int nr = to_sensor_dev_attr_2(attr)->nr; 165 struct mlxreg_core_item *item; 166 struct mlxreg_core_data *data; 167 u32 regval; 168 int ret; 169 170 pdata = dev_get_platdata(&priv->pdev->dev); 171 item = pdata->items + nr; 172 data = item->data + index; 173 174 ret = regmap_read(priv->regmap, data->reg, ®val); 175 if (ret) 176 return ret; 177 178 if (item->health) { 179 regval &= data->mask; 180 } else { 181 /* Bit = 0 : functional if item->inversed is true. */ 182 if (item->inversed) 183 regval = !(regval & data->mask); 184 else 185 regval = !!(regval & data->mask); 186 } 187 188 return sprintf(buf, "%u\n", regval); 189 } 190 191 #define PRIV_ATTR(i) priv->mlxreg_hotplug_attr[i] 192 #define PRIV_DEV_ATTR(i) priv->mlxreg_hotplug_dev_attr[i] 193 194 static int mlxreg_hotplug_attr_init(struct mlxreg_hotplug_priv_data *priv) 195 { 196 struct mlxreg_core_hotplug_platform_data *pdata; 197 struct mlxreg_core_item *item; 198 struct mlxreg_core_data *data; 199 int num_attrs = 0, id = 0, i, j; 200 201 pdata = dev_get_platdata(&priv->pdev->dev); 202 item = pdata->items; 203 204 /* Go over all kinds of items - psu, pwr, fan. */ 205 for (i = 0; i < pdata->counter; i++, item++) { 206 num_attrs += item->count; 207 data = item->data; 208 /* Go over all units within the item. */ 209 for (j = 0; j < item->count; j++, data++, id++) { 210 PRIV_ATTR(id) = &PRIV_DEV_ATTR(id).dev_attr.attr; 211 PRIV_ATTR(id)->name = devm_kasprintf(&priv->pdev->dev, 212 GFP_KERNEL, 213 data->label); 214 215 if (!PRIV_ATTR(id)->name) { 216 dev_err(priv->dev, "Memory allocation failed for attr %d.\n", 217 id); 218 return -ENOMEM; 219 } 220 221 PRIV_DEV_ATTR(id).dev_attr.attr.name = 222 PRIV_ATTR(id)->name; 223 PRIV_DEV_ATTR(id).dev_attr.attr.mode = 0444; 224 PRIV_DEV_ATTR(id).dev_attr.show = 225 mlxreg_hotplug_attr_show; 226 PRIV_DEV_ATTR(id).nr = i; 227 PRIV_DEV_ATTR(id).index = j; 228 sysfs_attr_init(&PRIV_DEV_ATTR(id).dev_attr.attr); 229 } 230 } 231 232 priv->group.attrs = devm_kcalloc(&priv->pdev->dev, 233 num_attrs, 234 sizeof(struct attribute *), 235 GFP_KERNEL); 236 if (!priv->group.attrs) 237 return -ENOMEM; 238 239 priv->group.attrs = priv->mlxreg_hotplug_attr; 240 priv->groups[0] = &priv->group; 241 priv->groups[1] = NULL; 242 243 return 0; 244 } 245 246 static void 247 mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv, 248 struct mlxreg_core_item *item) 249 { 250 struct mlxreg_core_data *data; 251 unsigned long asserted; 252 u32 regval, bit; 253 int ret; 254 255 /* 256 * Validate if item related to received signal type is valid. 257 * It should never happen, excepted the situation when some 258 * piece of hardware is broken. In such situation just produce 259 * error message and return. Caller must continue to handle the 260 * signals from other devices if any. 261 */ 262 if (unlikely(!item)) { 263 dev_err(priv->dev, "False signal: at offset:mask 0x%02x:0x%02x.\n", 264 item->reg, item->mask); 265 266 return; 267 } 268 269 /* Mask event. */ 270 ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF, 271 0); 272 if (ret) 273 goto out; 274 275 /* Read status. */ 276 ret = regmap_read(priv->regmap, item->reg, ®val); 277 if (ret) 278 goto out; 279 280 /* Set asserted bits and save last status. */ 281 regval &= item->mask; 282 asserted = item->cache ^ regval; 283 item->cache = regval; 284 285 for_each_set_bit(bit, &asserted, 8) { 286 data = item->data + bit; 287 if (regval & BIT(bit)) { 288 if (item->inversed) 289 mlxreg_hotplug_device_destroy(priv, data); 290 else 291 mlxreg_hotplug_device_create(priv, data); 292 } else { 293 if (item->inversed) 294 mlxreg_hotplug_device_create(priv, data); 295 else 296 mlxreg_hotplug_device_destroy(priv, data); 297 } 298 } 299 300 /* Acknowledge event. */ 301 ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_EVENT_OFF, 302 0); 303 if (ret) 304 goto out; 305 306 /* Unmask event. */ 307 ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF, 308 item->mask); 309 310 out: 311 if (ret) 312 dev_err(priv->dev, "Failed to complete workqueue.\n"); 313 } 314 315 static void 316 mlxreg_hotplug_health_work_helper(struct mlxreg_hotplug_priv_data *priv, 317 struct mlxreg_core_item *item) 318 { 319 struct mlxreg_core_data *data = item->data; 320 u32 regval; 321 int i, ret = 0; 322 323 for (i = 0; i < item->count; i++, data++) { 324 /* Mask event. */ 325 ret = regmap_write(priv->regmap, data->reg + 326 MLXREG_HOTPLUG_MASK_OFF, 0); 327 if (ret) 328 goto out; 329 330 /* Read status. */ 331 ret = regmap_read(priv->regmap, data->reg, ®val); 332 if (ret) 333 goto out; 334 335 regval &= data->mask; 336 337 if (item->cache == regval) 338 goto ack_event; 339 340 /* 341 * ASIC health indication is provided through two bits. Bits 342 * value 0x2 indicates that ASIC reached the good health, value 343 * 0x0 indicates ASIC the bad health or dormant state and value 344 * 0x3 indicates the booting state. During ASIC reset it should 345 * pass the following states: dormant -> booting -> good. 346 */ 347 if (regval == MLXREG_HOTPLUG_GOOD_HEALTH_MASK) { 348 if (!data->attached) { 349 /* 350 * ASIC is in steady state. Connect associated 351 * device, if configured. 352 */ 353 mlxreg_hotplug_device_create(priv, data); 354 data->attached = true; 355 } 356 } else { 357 if (data->attached) { 358 /* 359 * ASIC health is failed after ASIC has been 360 * in steady state. Disconnect associated 361 * device, if it has been connected. 362 */ 363 mlxreg_hotplug_device_destroy(priv, data); 364 data->attached = false; 365 data->health_cntr = 0; 366 } 367 } 368 item->cache = regval; 369 ack_event: 370 /* Acknowledge event. */ 371 ret = regmap_write(priv->regmap, data->reg + 372 MLXREG_HOTPLUG_EVENT_OFF, 0); 373 if (ret) 374 goto out; 375 376 /* Unmask event. */ 377 ret = regmap_write(priv->regmap, data->reg + 378 MLXREG_HOTPLUG_MASK_OFF, data->mask); 379 if (ret) 380 goto out; 381 } 382 383 out: 384 if (ret) 385 dev_err(priv->dev, "Failed to complete workqueue.\n"); 386 } 387 388 /* 389 * mlxreg_hotplug_work_handler - performs traversing of device interrupt 390 * registers according to the below hierarchy schema: 391 * 392 * Aggregation registers (status/mask) 393 * PSU registers: *---* 394 * *-----------------* | | 395 * |status/event/mask|-----> | * | 396 * *-----------------* | | 397 * Power registers: | | 398 * *-----------------* | | 399 * |status/event/mask|-----> | * | 400 * *-----------------* | | 401 * FAN registers: | |--> CPU 402 * *-----------------* | | 403 * |status/event/mask|-----> | * | 404 * *-----------------* | | 405 * ASIC registers: | | 406 * *-----------------* | | 407 * |status/event/mask|-----> | * | 408 * *-----------------* | | 409 * *---* 410 * 411 * In case some system changed are detected: FAN in/out, PSU in/out, power 412 * cable attached/detached, ASIC health good/bad, relevant device is created 413 * or destroyed. 414 */ 415 static void mlxreg_hotplug_work_handler(struct work_struct *work) 416 { 417 struct mlxreg_core_hotplug_platform_data *pdata; 418 struct mlxreg_hotplug_priv_data *priv; 419 struct mlxreg_core_item *item; 420 u32 regval, aggr_asserted; 421 unsigned long flags; 422 int i, ret; 423 424 priv = container_of(work, struct mlxreg_hotplug_priv_data, 425 dwork_irq.work); 426 pdata = dev_get_platdata(&priv->pdev->dev); 427 item = pdata->items; 428 429 /* Mask aggregation event. */ 430 ret = regmap_write(priv->regmap, pdata->cell + 431 MLXREG_HOTPLUG_AGGR_MASK_OFF, 0); 432 if (ret < 0) 433 goto out; 434 435 /* Read aggregation status. */ 436 ret = regmap_read(priv->regmap, pdata->cell, ®val); 437 if (ret) 438 goto out; 439 440 regval &= pdata->mask; 441 aggr_asserted = priv->aggr_cache ^ regval; 442 priv->aggr_cache = regval; 443 444 /* 445 * Handler is invoked, but no assertion is detected at top aggregation 446 * status level. Set aggr_asserted to mask value to allow handler extra 447 * run over all relevant signals to recover any missed signal. 448 */ 449 if (priv->not_asserted == MLXREG_HOTPLUG_NOT_ASSERT) { 450 priv->not_asserted = 0; 451 aggr_asserted = pdata->mask; 452 } 453 if (!aggr_asserted) 454 goto unmask_event; 455 456 /* Handle topology and health configuration changes. */ 457 for (i = 0; i < pdata->counter; i++, item++) { 458 if (aggr_asserted & item->aggr_mask) { 459 if (item->health) 460 mlxreg_hotplug_health_work_helper(priv, item); 461 else 462 mlxreg_hotplug_work_helper(priv, item); 463 } 464 } 465 466 spin_lock_irqsave(&priv->lock, flags); 467 468 /* 469 * It is possible, that some signals have been inserted, while 470 * interrupt has been masked by mlxreg_hotplug_work_handler. In this 471 * case such signals will be missed. In order to handle these signals 472 * delayed work is canceled and work task re-scheduled for immediate 473 * execution. It allows to handle missed signals, if any. In other case 474 * work handler just validates that no new signals have been received 475 * during masking. 476 */ 477 cancel_delayed_work(&priv->dwork_irq); 478 schedule_delayed_work(&priv->dwork_irq, 0); 479 480 spin_unlock_irqrestore(&priv->lock, flags); 481 482 return; 483 484 unmask_event: 485 priv->not_asserted++; 486 /* Unmask aggregation event (no need acknowledge). */ 487 ret = regmap_write(priv->regmap, pdata->cell + 488 MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask); 489 490 out: 491 if (ret) 492 dev_err(priv->dev, "Failed to complete workqueue.\n"); 493 } 494 495 static int mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv) 496 { 497 struct mlxreg_core_hotplug_platform_data *pdata; 498 struct mlxreg_core_item *item; 499 struct mlxreg_core_data *data; 500 u32 regval; 501 int i, j, ret; 502 503 pdata = dev_get_platdata(&priv->pdev->dev); 504 item = pdata->items; 505 506 for (i = 0; i < pdata->counter; i++, item++) { 507 /* Clear group presense event. */ 508 ret = regmap_write(priv->regmap, item->reg + 509 MLXREG_HOTPLUG_EVENT_OFF, 0); 510 if (ret) 511 goto out; 512 513 /* 514 * Verify if hardware configuration requires to disable 515 * interrupt capability for some of components. 516 */ 517 data = item->data; 518 for (j = 0; j < item->count; j++, data++) { 519 /* Verify if the attribute has capability register. */ 520 if (data->capability) { 521 /* Read capability register. */ 522 ret = regmap_read(priv->regmap, 523 data->capability, ®val); 524 if (ret) 525 goto out; 526 527 if (!(regval & data->bit)) 528 item->mask &= ~BIT(j); 529 } 530 } 531 532 /* Set group initial status as mask and unmask group event. */ 533 if (item->inversed) { 534 item->cache = item->mask; 535 ret = regmap_write(priv->regmap, item->reg + 536 MLXREG_HOTPLUG_MASK_OFF, 537 item->mask); 538 if (ret) 539 goto out; 540 } 541 } 542 543 /* Keep aggregation initial status as zero and unmask events. */ 544 ret = regmap_write(priv->regmap, pdata->cell + 545 MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask); 546 if (ret) 547 goto out; 548 549 /* Keep low aggregation initial status as zero and unmask events. */ 550 if (pdata->cell_low) { 551 ret = regmap_write(priv->regmap, pdata->cell_low + 552 MLXREG_HOTPLUG_AGGR_MASK_OFF, 553 pdata->mask_low); 554 if (ret) 555 goto out; 556 } 557 558 /* Invoke work handler for initializing hot plug devices setting. */ 559 mlxreg_hotplug_work_handler(&priv->dwork_irq.work); 560 561 out: 562 if (ret) 563 dev_err(priv->dev, "Failed to set interrupts.\n"); 564 enable_irq(priv->irq); 565 return ret; 566 } 567 568 static void mlxreg_hotplug_unset_irq(struct mlxreg_hotplug_priv_data *priv) 569 { 570 struct mlxreg_core_hotplug_platform_data *pdata; 571 struct mlxreg_core_item *item; 572 struct mlxreg_core_data *data; 573 int count, i, j; 574 575 pdata = dev_get_platdata(&priv->pdev->dev); 576 item = pdata->items; 577 disable_irq(priv->irq); 578 cancel_delayed_work_sync(&priv->dwork_irq); 579 580 /* Mask low aggregation event, if defined. */ 581 if (pdata->cell_low) 582 regmap_write(priv->regmap, pdata->cell_low + 583 MLXREG_HOTPLUG_AGGR_MASK_OFF, 0); 584 585 /* Mask aggregation event. */ 586 regmap_write(priv->regmap, pdata->cell + MLXREG_HOTPLUG_AGGR_MASK_OFF, 587 0); 588 589 /* Clear topology configurations. */ 590 for (i = 0; i < pdata->counter; i++, item++) { 591 data = item->data; 592 /* Mask group presense event. */ 593 regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_MASK_OFF, 594 0); 595 /* Clear group presense event. */ 596 regmap_write(priv->regmap, data->reg + 597 MLXREG_HOTPLUG_EVENT_OFF, 0); 598 599 /* Remove all the attached devices in group. */ 600 count = item->count; 601 for (j = 0; j < count; j++, data++) 602 mlxreg_hotplug_device_destroy(priv, data); 603 } 604 } 605 606 static irqreturn_t mlxreg_hotplug_irq_handler(int irq, void *dev) 607 { 608 struct mlxreg_hotplug_priv_data *priv; 609 610 priv = (struct mlxreg_hotplug_priv_data *)dev; 611 612 /* Schedule work task for immediate execution.*/ 613 schedule_delayed_work(&priv->dwork_irq, 0); 614 615 return IRQ_HANDLED; 616 } 617 618 static int mlxreg_hotplug_probe(struct platform_device *pdev) 619 { 620 struct mlxreg_core_hotplug_platform_data *pdata; 621 struct mlxreg_hotplug_priv_data *priv; 622 struct i2c_adapter *deferred_adap; 623 int err; 624 625 pdata = dev_get_platdata(&pdev->dev); 626 if (!pdata) { 627 dev_err(&pdev->dev, "Failed to get platform data.\n"); 628 return -EINVAL; 629 } 630 631 /* Defer probing if the necessary adapter is not configured yet. */ 632 deferred_adap = i2c_get_adapter(pdata->deferred_nr); 633 if (!deferred_adap) 634 return -EPROBE_DEFER; 635 i2c_put_adapter(deferred_adap); 636 637 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); 638 if (!priv) 639 return -ENOMEM; 640 641 if (pdata->irq) { 642 priv->irq = pdata->irq; 643 } else { 644 priv->irq = platform_get_irq(pdev, 0); 645 if (priv->irq < 0) { 646 dev_err(&pdev->dev, "Failed to get platform irq: %d\n", 647 priv->irq); 648 return priv->irq; 649 } 650 } 651 652 priv->regmap = pdata->regmap; 653 priv->dev = pdev->dev.parent; 654 priv->pdev = pdev; 655 656 err = devm_request_irq(&pdev->dev, priv->irq, 657 mlxreg_hotplug_irq_handler, IRQF_TRIGGER_FALLING 658 | IRQF_SHARED, "mlxreg-hotplug", priv); 659 if (err) { 660 dev_err(&pdev->dev, "Failed to request irq: %d\n", err); 661 return err; 662 } 663 664 disable_irq(priv->irq); 665 spin_lock_init(&priv->lock); 666 INIT_DELAYED_WORK(&priv->dwork_irq, mlxreg_hotplug_work_handler); 667 dev_set_drvdata(&pdev->dev, priv); 668 669 err = mlxreg_hotplug_attr_init(priv); 670 if (err) { 671 dev_err(&pdev->dev, "Failed to allocate attributes: %d\n", 672 err); 673 return err; 674 } 675 676 priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, 677 "mlxreg_hotplug", priv, priv->groups); 678 if (IS_ERR(priv->hwmon)) { 679 dev_err(&pdev->dev, "Failed to register hwmon device %ld\n", 680 PTR_ERR(priv->hwmon)); 681 return PTR_ERR(priv->hwmon); 682 } 683 684 /* Perform initial interrupts setup. */ 685 mlxreg_hotplug_set_irq(priv); 686 priv->after_probe = true; 687 688 return 0; 689 } 690 691 static int mlxreg_hotplug_remove(struct platform_device *pdev) 692 { 693 struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(&pdev->dev); 694 695 /* Clean interrupts setup. */ 696 mlxreg_hotplug_unset_irq(priv); 697 devm_free_irq(&pdev->dev, priv->irq, priv); 698 699 return 0; 700 } 701 702 static struct platform_driver mlxreg_hotplug_driver = { 703 .driver = { 704 .name = "mlxreg-hotplug", 705 }, 706 .probe = mlxreg_hotplug_probe, 707 .remove = mlxreg_hotplug_remove, 708 }; 709 710 module_platform_driver(mlxreg_hotplug_driver); 711 712 MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>"); 713 MODULE_DESCRIPTION("Mellanox regmap hotplug platform driver"); 714 MODULE_LICENSE("Dual BSD/GPL"); 715 MODULE_ALIAS("platform:mlxreg-hotplug"); 716