1 /*
2  * Copyright (c) 2016-2018 Mellanox Technologies. All rights reserved.
3  * Copyright (c) 2016-2018 Vadim Pasternak <vadimp@mellanox.com>
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions are met:
7  *
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. Neither the names of the copyright holders nor the names of its
14  *    contributors may be used to endorse or promote products derived from
15  *    this software without specific prior written permission.
16  *
17  * Alternatively, this software may be distributed under the terms of the
18  * GNU General Public License ("GPL") version 2 as published by the Free
19  * Software Foundation.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
22  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
25  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31  * POSSIBILITY OF SUCH DAMAGE.
32  */
33 
34 #include <linux/bitops.h>
35 #include <linux/device.h>
36 #include <linux/hwmon.h>
37 #include <linux/hwmon-sysfs.h>
38 #include <linux/i2c.h>
39 #include <linux/interrupt.h>
40 #include <linux/module.h>
41 #include <linux/of_device.h>
42 #include <linux/platform_data/mlxreg.h>
43 #include <linux/platform_device.h>
44 #include <linux/spinlock.h>
45 #include <linux/regmap.h>
46 #include <linux/workqueue.h>
47 
48 /* Offset of event and mask registers from status register. */
49 #define MLXREG_HOTPLUG_EVENT_OFF	1
50 #define MLXREG_HOTPLUG_MASK_OFF		2
51 #define MLXREG_HOTPLUG_AGGR_MASK_OFF	1
52 
53 /* ASIC good health mask. */
54 #define MLXREG_HOTPLUG_GOOD_HEALTH_MASK	0x02
55 
56 #define MLXREG_HOTPLUG_ATTRS_MAX	24
57 #define MLXREG_HOTPLUG_NOT_ASSERT	3
58 
59 /**
60  * struct mlxreg_hotplug_priv_data - platform private data:
61  * @irq: platform device interrupt number;
62  * @dev: basic device;
63  * @pdev: platform device;
64  * @plat: platform data;
65  * @regmap: register map handle;
66  * @dwork_irq: delayed work template;
67  * @lock: spin lock;
68  * @hwmon: hwmon device;
69  * @mlxreg_hotplug_attr: sysfs attributes array;
70  * @mlxreg_hotplug_dev_attr: sysfs sensor device attribute array;
71  * @group: sysfs attribute group;
72  * @groups: list of sysfs attribute group for hwmon registration;
73  * @cell: location of top aggregation interrupt register;
74  * @mask: top aggregation interrupt common mask;
75  * @aggr_cache: last value of aggregation register status;
76  * @after_probe: flag indication probing completion;
77  * @not_asserted: number of entries in workqueue with no signal assertion;
78  */
79 struct mlxreg_hotplug_priv_data {
80 	int irq;
81 	struct device *dev;
82 	struct platform_device *pdev;
83 	struct mlxreg_hotplug_platform_data *plat;
84 	struct regmap *regmap;
85 	struct delayed_work dwork_irq;
86 	spinlock_t lock; /* sync with interrupt */
87 	struct device *hwmon;
88 	struct attribute *mlxreg_hotplug_attr[MLXREG_HOTPLUG_ATTRS_MAX + 1];
89 	struct sensor_device_attribute_2
90 			mlxreg_hotplug_dev_attr[MLXREG_HOTPLUG_ATTRS_MAX];
91 	struct attribute_group group;
92 	const struct attribute_group *groups[2];
93 	u32 cell;
94 	u32 mask;
95 	u32 aggr_cache;
96 	bool after_probe;
97 	u8 not_asserted;
98 };
99 
100 static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv,
101 					struct mlxreg_core_data *data)
102 {
103 	struct mlxreg_core_hotplug_platform_data *pdata;
104 
105 	/* Notify user by sending hwmon uevent. */
106 	kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE);
107 
108 	/*
109 	 * Return if adapter number is negative. It could be in case hotplug
110 	 * event is not associated with hotplug device.
111 	 */
112 	if (data->hpdev.nr < 0)
113 		return 0;
114 
115 	pdata = dev_get_platdata(&priv->pdev->dev);
116 	data->hpdev.adapter = i2c_get_adapter(data->hpdev.nr +
117 					      pdata->shift_nr);
118 	if (!data->hpdev.adapter) {
119 		dev_err(priv->dev, "Failed to get adapter for bus %d\n",
120 			data->hpdev.nr + pdata->shift_nr);
121 		return -EFAULT;
122 	}
123 
124 	data->hpdev.client = i2c_new_device(data->hpdev.adapter,
125 					    data->hpdev.brdinfo);
126 	if (!data->hpdev.client) {
127 		dev_err(priv->dev, "Failed to create client %s at bus %d at addr 0x%02x\n",
128 			data->hpdev.brdinfo->type, data->hpdev.nr +
129 			pdata->shift_nr, data->hpdev.brdinfo->addr);
130 
131 		i2c_put_adapter(data->hpdev.adapter);
132 		data->hpdev.adapter = NULL;
133 		return -EFAULT;
134 	}
135 
136 	return 0;
137 }
138 
139 static void
140 mlxreg_hotplug_device_destroy(struct mlxreg_hotplug_priv_data *priv,
141 			      struct mlxreg_core_data *data)
142 {
143 	/* Notify user by sending hwmon uevent. */
144 	kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE);
145 
146 	if (data->hpdev.client) {
147 		i2c_unregister_device(data->hpdev.client);
148 		data->hpdev.client = NULL;
149 	}
150 
151 	if (data->hpdev.adapter) {
152 		i2c_put_adapter(data->hpdev.adapter);
153 		data->hpdev.adapter = NULL;
154 	}
155 }
156 
157 static ssize_t mlxreg_hotplug_attr_show(struct device *dev,
158 					struct device_attribute *attr,
159 					char *buf)
160 {
161 	struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(dev);
162 	struct mlxreg_core_hotplug_platform_data *pdata;
163 	int index = to_sensor_dev_attr_2(attr)->index;
164 	int nr = to_sensor_dev_attr_2(attr)->nr;
165 	struct mlxreg_core_item *item;
166 	struct mlxreg_core_data *data;
167 	u32 regval;
168 	int ret;
169 
170 	pdata = dev_get_platdata(&priv->pdev->dev);
171 	item = pdata->items + nr;
172 	data = item->data + index;
173 
174 	ret = regmap_read(priv->regmap, data->reg, &regval);
175 	if (ret)
176 		return ret;
177 
178 	if (item->health) {
179 		regval &= data->mask;
180 	} else {
181 		/* Bit = 0 : functional if item->inversed is true. */
182 		if (item->inversed)
183 			regval = !(regval & data->mask);
184 		else
185 			regval = !!(regval & data->mask);
186 	}
187 
188 	return sprintf(buf, "%u\n", regval);
189 }
190 
191 #define PRIV_ATTR(i) priv->mlxreg_hotplug_attr[i]
192 #define PRIV_DEV_ATTR(i) priv->mlxreg_hotplug_dev_attr[i]
193 
194 static int mlxreg_hotplug_attr_init(struct mlxreg_hotplug_priv_data *priv)
195 {
196 	struct mlxreg_core_hotplug_platform_data *pdata;
197 	struct mlxreg_core_item *item;
198 	struct mlxreg_core_data *data;
199 	int num_attrs = 0, id = 0, i, j;
200 
201 	pdata = dev_get_platdata(&priv->pdev->dev);
202 	item = pdata->items;
203 
204 	/* Go over all kinds of items - psu, pwr, fan. */
205 	for (i = 0; i < pdata->counter; i++, item++) {
206 		num_attrs += item->count;
207 		data = item->data;
208 		/* Go over all units within the item. */
209 		for (j = 0; j < item->count; j++, data++, id++) {
210 			PRIV_ATTR(id) = &PRIV_DEV_ATTR(id).dev_attr.attr;
211 			PRIV_ATTR(id)->name = devm_kasprintf(&priv->pdev->dev,
212 							     GFP_KERNEL,
213 							     data->label);
214 
215 			if (!PRIV_ATTR(id)->name) {
216 				dev_err(priv->dev, "Memory allocation failed for attr %d.\n",
217 					id);
218 				return -ENOMEM;
219 			}
220 
221 			PRIV_DEV_ATTR(id).dev_attr.attr.name =
222 							PRIV_ATTR(id)->name;
223 			PRIV_DEV_ATTR(id).dev_attr.attr.mode = 0444;
224 			PRIV_DEV_ATTR(id).dev_attr.show =
225 						mlxreg_hotplug_attr_show;
226 			PRIV_DEV_ATTR(id).nr = i;
227 			PRIV_DEV_ATTR(id).index = j;
228 			sysfs_attr_init(&PRIV_DEV_ATTR(id).dev_attr.attr);
229 		}
230 	}
231 
232 	priv->group.attrs = devm_kcalloc(&priv->pdev->dev,
233 					 num_attrs,
234 					 sizeof(struct attribute *),
235 					 GFP_KERNEL);
236 	if (!priv->group.attrs)
237 		return -ENOMEM;
238 
239 	priv->group.attrs = priv->mlxreg_hotplug_attr;
240 	priv->groups[0] = &priv->group;
241 	priv->groups[1] = NULL;
242 
243 	return 0;
244 }
245 
246 static void
247 mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv,
248 			   struct mlxreg_core_item *item)
249 {
250 	struct mlxreg_core_data *data;
251 	u32 asserted, regval, bit;
252 	int ret;
253 
254 	/*
255 	 * Validate if item related to received signal type is valid.
256 	 * It should never happen, excepted the situation when some
257 	 * piece of hardware is broken. In such situation just produce
258 	 * error message and return. Caller must continue to handle the
259 	 * signals from other devices if any.
260 	 */
261 	if (unlikely(!item)) {
262 		dev_err(priv->dev, "False signal: at offset:mask 0x%02x:0x%02x.\n",
263 			item->reg, item->mask);
264 
265 		return;
266 	}
267 
268 	/* Mask event. */
269 	ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF,
270 			   0);
271 	if (ret)
272 		goto out;
273 
274 	/* Read status. */
275 	ret = regmap_read(priv->regmap, item->reg, &regval);
276 	if (ret)
277 		goto out;
278 
279 	/* Set asserted bits and save last status. */
280 	regval &= item->mask;
281 	asserted = item->cache ^ regval;
282 	item->cache = regval;
283 
284 	for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
285 		data = item->data + bit;
286 		if (regval & BIT(bit)) {
287 			if (item->inversed)
288 				mlxreg_hotplug_device_destroy(priv, data);
289 			else
290 				mlxreg_hotplug_device_create(priv, data);
291 		} else {
292 			if (item->inversed)
293 				mlxreg_hotplug_device_create(priv, data);
294 			else
295 				mlxreg_hotplug_device_destroy(priv, data);
296 		}
297 	}
298 
299 	/* Acknowledge event. */
300 	ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_EVENT_OFF,
301 			   0);
302 	if (ret)
303 		goto out;
304 
305 	/* Unmask event. */
306 	ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF,
307 			   item->mask);
308 
309  out:
310 	if (ret)
311 		dev_err(priv->dev, "Failed to complete workqueue.\n");
312 }
313 
314 static void
315 mlxreg_hotplug_health_work_helper(struct mlxreg_hotplug_priv_data *priv,
316 				  struct mlxreg_core_item *item)
317 {
318 	struct mlxreg_core_data *data = item->data;
319 	u32 regval;
320 	int i, ret = 0;
321 
322 	for (i = 0; i < item->count; i++, data++) {
323 		/* Mask event. */
324 		ret = regmap_write(priv->regmap, data->reg +
325 				   MLXREG_HOTPLUG_MASK_OFF, 0);
326 		if (ret)
327 			goto out;
328 
329 		/* Read status. */
330 		ret = regmap_read(priv->regmap, data->reg, &regval);
331 		if (ret)
332 			goto out;
333 
334 		regval &= data->mask;
335 
336 		if (item->cache == regval)
337 			goto ack_event;
338 
339 		/*
340 		 * ASIC health indication is provided through two bits. Bits
341 		 * value 0x2 indicates that ASIC reached the good health, value
342 		 * 0x0 indicates ASIC the bad health or dormant state and value
343 		 * 0x3 indicates the booting state. During ASIC reset it should
344 		 * pass the following states: dormant -> booting -> good.
345 		 */
346 		if (regval == MLXREG_HOTPLUG_GOOD_HEALTH_MASK) {
347 			if (!data->attached) {
348 				/*
349 				 * ASIC is in steady state. Connect associated
350 				 * device, if configured.
351 				 */
352 				mlxreg_hotplug_device_create(priv, data);
353 				data->attached = true;
354 			}
355 		} else {
356 			if (data->attached) {
357 				/*
358 				 * ASIC health is failed after ASIC has been
359 				 * in steady state. Disconnect associated
360 				 * device, if it has been connected.
361 				 */
362 				mlxreg_hotplug_device_destroy(priv, data);
363 				data->attached = false;
364 				data->health_cntr = 0;
365 			}
366 		}
367 		item->cache = regval;
368 ack_event:
369 		/* Acknowledge event. */
370 		ret = regmap_write(priv->regmap, data->reg +
371 				   MLXREG_HOTPLUG_EVENT_OFF, 0);
372 		if (ret)
373 			goto out;
374 
375 		/* Unmask event. */
376 		ret = regmap_write(priv->regmap, data->reg +
377 				   MLXREG_HOTPLUG_MASK_OFF, data->mask);
378 		if (ret)
379 			goto out;
380 	}
381 
382  out:
383 	if (ret)
384 		dev_err(priv->dev, "Failed to complete workqueue.\n");
385 }
386 
387 /*
388  * mlxreg_hotplug_work_handler - performs traversing of device interrupt
389  * registers according to the below hierarchy schema:
390  *
391  *				Aggregation registers (status/mask)
392  * PSU registers:		*---*
393  * *-----------------*		|   |
394  * |status/event/mask|----->    | * |
395  * *-----------------*		|   |
396  * Power registers:		|   |
397  * *-----------------*		|   |
398  * |status/event/mask|----->    | * |
399  * *-----------------*		|   |
400  * FAN registers:		|   |--> CPU
401  * *-----------------*		|   |
402  * |status/event/mask|----->    | * |
403  * *-----------------*		|   |
404  * ASIC registers:		|   |
405  * *-----------------*		|   |
406  * |status/event/mask|----->    | * |
407  * *-----------------*		|   |
408  *				*---*
409  *
410  * In case some system changed are detected: FAN in/out, PSU in/out, power
411  * cable attached/detached, ASIC health good/bad, relevant device is created
412  * or destroyed.
413  */
414 static void mlxreg_hotplug_work_handler(struct work_struct *work)
415 {
416 	struct mlxreg_core_hotplug_platform_data *pdata;
417 	struct mlxreg_hotplug_priv_data *priv;
418 	struct mlxreg_core_item *item;
419 	u32 regval, aggr_asserted;
420 	unsigned long flags;
421 	int i, ret;
422 
423 	priv = container_of(work, struct mlxreg_hotplug_priv_data,
424 			    dwork_irq.work);
425 	pdata = dev_get_platdata(&priv->pdev->dev);
426 	item = pdata->items;
427 
428 	/* Mask aggregation event. */
429 	ret = regmap_write(priv->regmap, pdata->cell +
430 			   MLXREG_HOTPLUG_AGGR_MASK_OFF, 0);
431 	if (ret < 0)
432 		goto out;
433 
434 	/* Read aggregation status. */
435 	ret = regmap_read(priv->regmap, pdata->cell, &regval);
436 	if (ret)
437 		goto out;
438 
439 	regval &= pdata->mask;
440 	aggr_asserted = priv->aggr_cache ^ regval;
441 	priv->aggr_cache = regval;
442 
443 	/*
444 	 * Handler is invoked, but no assertion is detected at top aggregation
445 	 * status level. Set aggr_asserted to mask value to allow handler extra
446 	 * run over all relevant signals to recover any missed signal.
447 	 */
448 	if (priv->not_asserted == MLXREG_HOTPLUG_NOT_ASSERT) {
449 		priv->not_asserted = 0;
450 		aggr_asserted = pdata->mask;
451 	}
452 	if (!aggr_asserted)
453 		goto unmask_event;
454 
455 	/* Handle topology and health configuration changes. */
456 	for (i = 0; i < pdata->counter; i++, item++) {
457 		if (aggr_asserted & item->aggr_mask) {
458 			if (item->health)
459 				mlxreg_hotplug_health_work_helper(priv, item);
460 			else
461 				mlxreg_hotplug_work_helper(priv, item);
462 		}
463 	}
464 
465 	spin_lock_irqsave(&priv->lock, flags);
466 
467 	/*
468 	 * It is possible, that some signals have been inserted, while
469 	 * interrupt has been masked by mlxreg_hotplug_work_handler. In this
470 	 * case such signals will be missed. In order to handle these signals
471 	 * delayed work is canceled and work task re-scheduled for immediate
472 	 * execution. It allows to handle missed signals, if any. In other case
473 	 * work handler just validates that no new signals have been received
474 	 * during masking.
475 	 */
476 	cancel_delayed_work(&priv->dwork_irq);
477 	schedule_delayed_work(&priv->dwork_irq, 0);
478 
479 	spin_unlock_irqrestore(&priv->lock, flags);
480 
481 	return;
482 
483 unmask_event:
484 	priv->not_asserted++;
485 	/* Unmask aggregation event (no need acknowledge). */
486 	ret = regmap_write(priv->regmap, pdata->cell +
487 			   MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask);
488 
489  out:
490 	if (ret)
491 		dev_err(priv->dev, "Failed to complete workqueue.\n");
492 }
493 
494 static int mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv)
495 {
496 	struct mlxreg_core_hotplug_platform_data *pdata;
497 	struct mlxreg_core_item *item;
498 	int i, ret;
499 
500 	pdata = dev_get_platdata(&priv->pdev->dev);
501 	item = pdata->items;
502 
503 	for (i = 0; i < pdata->counter; i++, item++) {
504 		/* Clear group presense event. */
505 		ret = regmap_write(priv->regmap, item->reg +
506 				   MLXREG_HOTPLUG_EVENT_OFF, 0);
507 		if (ret)
508 			goto out;
509 
510 		/* Set group initial status as mask and unmask group event. */
511 		if (item->inversed) {
512 			item->cache = item->mask;
513 			ret = regmap_write(priv->regmap, item->reg +
514 					   MLXREG_HOTPLUG_MASK_OFF,
515 					   item->mask);
516 			if (ret)
517 				goto out;
518 		}
519 	}
520 
521 	/* Keep aggregation initial status as zero and unmask events. */
522 	ret = regmap_write(priv->regmap, pdata->cell +
523 			   MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask);
524 	if (ret)
525 		goto out;
526 
527 	/* Keep low aggregation initial status as zero and unmask events. */
528 	if (pdata->cell_low) {
529 		ret = regmap_write(priv->regmap, pdata->cell_low +
530 				   MLXREG_HOTPLUG_AGGR_MASK_OFF,
531 				   pdata->mask_low);
532 		if (ret)
533 			goto out;
534 	}
535 
536 	/* Invoke work handler for initializing hot plug devices setting. */
537 	mlxreg_hotplug_work_handler(&priv->dwork_irq.work);
538 
539  out:
540 	if (ret)
541 		dev_err(priv->dev, "Failed to set interrupts.\n");
542 	enable_irq(priv->irq);
543 	return ret;
544 }
545 
546 static void mlxreg_hotplug_unset_irq(struct mlxreg_hotplug_priv_data *priv)
547 {
548 	struct mlxreg_core_hotplug_platform_data *pdata;
549 	struct mlxreg_core_item *item;
550 	struct mlxreg_core_data *data;
551 	int count, i, j;
552 
553 	pdata = dev_get_platdata(&priv->pdev->dev);
554 	item = pdata->items;
555 	disable_irq(priv->irq);
556 	cancel_delayed_work_sync(&priv->dwork_irq);
557 
558 	/* Mask low aggregation event, if defined. */
559 	if (pdata->cell_low)
560 		regmap_write(priv->regmap, pdata->cell_low +
561 			     MLXREG_HOTPLUG_AGGR_MASK_OFF, 0);
562 
563 	/* Mask aggregation event. */
564 	regmap_write(priv->regmap, pdata->cell + MLXREG_HOTPLUG_AGGR_MASK_OFF,
565 		     0);
566 
567 	/* Clear topology configurations. */
568 	for (i = 0; i < pdata->counter; i++, item++) {
569 		data = item->data;
570 		/* Mask group presense event. */
571 		regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_MASK_OFF,
572 			     0);
573 		/* Clear group presense event. */
574 		regmap_write(priv->regmap, data->reg +
575 			     MLXREG_HOTPLUG_EVENT_OFF, 0);
576 
577 		/* Remove all the attached devices in group. */
578 		count = item->count;
579 		for (j = 0; j < count; j++, data++)
580 			mlxreg_hotplug_device_destroy(priv, data);
581 	}
582 }
583 
584 static irqreturn_t mlxreg_hotplug_irq_handler(int irq, void *dev)
585 {
586 	struct mlxreg_hotplug_priv_data *priv;
587 
588 	priv = (struct mlxreg_hotplug_priv_data *)dev;
589 
590 	/* Schedule work task for immediate execution.*/
591 	schedule_delayed_work(&priv->dwork_irq, 0);
592 
593 	return IRQ_HANDLED;
594 }
595 
596 static int mlxreg_hotplug_probe(struct platform_device *pdev)
597 {
598 	struct mlxreg_core_hotplug_platform_data *pdata;
599 	struct mlxreg_hotplug_priv_data *priv;
600 	struct i2c_adapter *deferred_adap;
601 	int err;
602 
603 	pdata = dev_get_platdata(&pdev->dev);
604 	if (!pdata) {
605 		dev_err(&pdev->dev, "Failed to get platform data.\n");
606 		return -EINVAL;
607 	}
608 
609 	/* Defer probing if the necessary adapter is not configured yet. */
610 	deferred_adap = i2c_get_adapter(pdata->deferred_nr);
611 	if (!deferred_adap)
612 		return -EPROBE_DEFER;
613 	i2c_put_adapter(deferred_adap);
614 
615 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
616 	if (!priv)
617 		return -ENOMEM;
618 
619 	if (pdata->irq) {
620 		priv->irq = pdata->irq;
621 	} else {
622 		priv->irq = platform_get_irq(pdev, 0);
623 		if (priv->irq < 0) {
624 			dev_err(&pdev->dev, "Failed to get platform irq: %d\n",
625 				priv->irq);
626 			return priv->irq;
627 		}
628 	}
629 
630 	priv->regmap = pdata->regmap;
631 	priv->dev = pdev->dev.parent;
632 	priv->pdev = pdev;
633 
634 	err = devm_request_irq(&pdev->dev, priv->irq,
635 			       mlxreg_hotplug_irq_handler, IRQF_TRIGGER_FALLING
636 			       | IRQF_SHARED, "mlxreg-hotplug", priv);
637 	if (err) {
638 		dev_err(&pdev->dev, "Failed to request irq: %d\n", err);
639 		return err;
640 	}
641 
642 	disable_irq(priv->irq);
643 	spin_lock_init(&priv->lock);
644 	INIT_DELAYED_WORK(&priv->dwork_irq, mlxreg_hotplug_work_handler);
645 	dev_set_drvdata(&pdev->dev, priv);
646 
647 	err = mlxreg_hotplug_attr_init(priv);
648 	if (err) {
649 		dev_err(&pdev->dev, "Failed to allocate attributes: %d\n",
650 			err);
651 		return err;
652 	}
653 
654 	priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev,
655 					"mlxreg_hotplug", priv, priv->groups);
656 	if (IS_ERR(priv->hwmon)) {
657 		dev_err(&pdev->dev, "Failed to register hwmon device %ld\n",
658 			PTR_ERR(priv->hwmon));
659 		return PTR_ERR(priv->hwmon);
660 	}
661 
662 	/* Perform initial interrupts setup. */
663 	mlxreg_hotplug_set_irq(priv);
664 	priv->after_probe = true;
665 
666 	return 0;
667 }
668 
669 static int mlxreg_hotplug_remove(struct platform_device *pdev)
670 {
671 	struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(&pdev->dev);
672 
673 	/* Clean interrupts setup. */
674 	mlxreg_hotplug_unset_irq(priv);
675 
676 	return 0;
677 }
678 
679 static struct platform_driver mlxreg_hotplug_driver = {
680 	.driver = {
681 		.name = "mlxreg-hotplug",
682 	},
683 	.probe = mlxreg_hotplug_probe,
684 	.remove = mlxreg_hotplug_remove,
685 };
686 
687 module_platform_driver(mlxreg_hotplug_driver);
688 
689 MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
690 MODULE_DESCRIPTION("Mellanox regmap hotplug platform driver");
691 MODULE_LICENSE("Dual BSD/GPL");
692 MODULE_ALIAS("platform:mlxreg-hotplug");
693