1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Mellanox boot control driver 4 * 5 * This driver provides a sysfs interface for systems management 6 * software to manage reset-time actions. 7 * 8 * Copyright (C) 2019 Mellanox Technologies 9 */ 10 11 #include <linux/acpi.h> 12 #include <linux/arm-smccc.h> 13 #include <linux/module.h> 14 #include <linux/platform_device.h> 15 16 #include "mlxbf-bootctl.h" 17 18 #define MLXBF_BOOTCTL_SB_SECURE_MASK 0x03 19 #define MLXBF_BOOTCTL_SB_TEST_MASK 0x0c 20 21 #define MLXBF_SB_KEY_NUM 4 22 23 /* UUID used to probe ATF service. */ 24 static const char *mlxbf_bootctl_svc_uuid_str = 25 "89c036b4-e7d7-11e6-8797-001aca00bfc4"; 26 27 struct mlxbf_bootctl_name { 28 u32 value; 29 const char *name; 30 }; 31 32 static struct mlxbf_bootctl_name boot_names[] = { 33 { MLXBF_BOOTCTL_EXTERNAL, "external" }, 34 { MLXBF_BOOTCTL_EMMC, "emmc" }, 35 { MLNX_BOOTCTL_SWAP_EMMC, "swap_emmc" }, 36 { MLXBF_BOOTCTL_EMMC_LEGACY, "emmc_legacy" }, 37 { MLXBF_BOOTCTL_NONE, "none" }, 38 }; 39 40 static const char * const mlxbf_bootctl_lifecycle_states[] = { 41 [0] = "Production", 42 [1] = "GA Secured", 43 [2] = "GA Non-Secured", 44 [3] = "RMA", 45 }; 46 47 /* ARM SMC call which is atomic and no need for lock. */ 48 static int mlxbf_bootctl_smc(unsigned int smc_op, int smc_arg) 49 { 50 struct arm_smccc_res res; 51 52 arm_smccc_smc(smc_op, smc_arg, 0, 0, 0, 0, 0, 0, &res); 53 54 return res.a0; 55 } 56 57 /* Return the action in integer or an error code. */ 58 static int mlxbf_bootctl_reset_action_to_val(const char *action) 59 { 60 int i; 61 62 for (i = 0; i < ARRAY_SIZE(boot_names); i++) 63 if (sysfs_streq(boot_names[i].name, action)) 64 return boot_names[i].value; 65 66 return -EINVAL; 67 } 68 69 /* Return the action in string. */ 70 static const char *mlxbf_bootctl_action_to_string(int action) 71 { 72 int i; 73 74 for (i = 0; i < ARRAY_SIZE(boot_names); i++) 75 if (boot_names[i].value == action) 76 return boot_names[i].name; 77 78 return "invalid action"; 79 } 80 81 static ssize_t post_reset_wdog_show(struct device *dev, 82 struct device_attribute *attr, char *buf) 83 { 84 int ret; 85 86 ret = mlxbf_bootctl_smc(MLXBF_BOOTCTL_GET_POST_RESET_WDOG, 0); 87 if (ret < 0) 88 return ret; 89 90 return sprintf(buf, "%d\n", ret); 91 } 92 93 static ssize_t post_reset_wdog_store(struct device *dev, 94 struct device_attribute *attr, 95 const char *buf, size_t count) 96 { 97 unsigned long value; 98 int ret; 99 100 ret = kstrtoul(buf, 10, &value); 101 if (ret) 102 return ret; 103 104 ret = mlxbf_bootctl_smc(MLXBF_BOOTCTL_SET_POST_RESET_WDOG, value); 105 if (ret < 0) 106 return ret; 107 108 return count; 109 } 110 111 static ssize_t mlxbf_bootctl_show(int smc_op, char *buf) 112 { 113 int action; 114 115 action = mlxbf_bootctl_smc(smc_op, 0); 116 if (action < 0) 117 return action; 118 119 return sprintf(buf, "%s\n", mlxbf_bootctl_action_to_string(action)); 120 } 121 122 static int mlxbf_bootctl_store(int smc_op, const char *buf, size_t count) 123 { 124 int ret, action; 125 126 action = mlxbf_bootctl_reset_action_to_val(buf); 127 if (action < 0) 128 return action; 129 130 ret = mlxbf_bootctl_smc(smc_op, action); 131 if (ret < 0) 132 return ret; 133 134 return count; 135 } 136 137 static ssize_t reset_action_show(struct device *dev, 138 struct device_attribute *attr, char *buf) 139 { 140 return mlxbf_bootctl_show(MLXBF_BOOTCTL_GET_RESET_ACTION, buf); 141 } 142 143 static ssize_t reset_action_store(struct device *dev, 144 struct device_attribute *attr, 145 const char *buf, size_t count) 146 { 147 return mlxbf_bootctl_store(MLXBF_BOOTCTL_SET_RESET_ACTION, buf, count); 148 } 149 150 static ssize_t second_reset_action_show(struct device *dev, 151 struct device_attribute *attr, 152 char *buf) 153 { 154 return mlxbf_bootctl_show(MLXBF_BOOTCTL_GET_SECOND_RESET_ACTION, buf); 155 } 156 157 static ssize_t second_reset_action_store(struct device *dev, 158 struct device_attribute *attr, 159 const char *buf, size_t count) 160 { 161 return mlxbf_bootctl_store(MLXBF_BOOTCTL_SET_SECOND_RESET_ACTION, buf, 162 count); 163 } 164 165 static ssize_t lifecycle_state_show(struct device *dev, 166 struct device_attribute *attr, char *buf) 167 { 168 int lc_state; 169 170 lc_state = mlxbf_bootctl_smc(MLXBF_BOOTCTL_GET_TBB_FUSE_STATUS, 171 MLXBF_BOOTCTL_FUSE_STATUS_LIFECYCLE); 172 if (lc_state < 0) 173 return lc_state; 174 175 lc_state &= 176 MLXBF_BOOTCTL_SB_TEST_MASK | MLXBF_BOOTCTL_SB_SECURE_MASK; 177 178 /* 179 * If the test bits are set, we specify that the current state may be 180 * due to using the test bits. 181 */ 182 if (lc_state & MLXBF_BOOTCTL_SB_TEST_MASK) { 183 lc_state &= MLXBF_BOOTCTL_SB_SECURE_MASK; 184 185 return sprintf(buf, "%s(test)\n", 186 mlxbf_bootctl_lifecycle_states[lc_state]); 187 } 188 189 return sprintf(buf, "%s\n", mlxbf_bootctl_lifecycle_states[lc_state]); 190 } 191 192 static ssize_t secure_boot_fuse_state_show(struct device *dev, 193 struct device_attribute *attr, 194 char *buf) 195 { 196 int burnt, valid, key, key_state, buf_len = 0, upper_key_used = 0; 197 const char *status; 198 199 key_state = mlxbf_bootctl_smc(MLXBF_BOOTCTL_GET_TBB_FUSE_STATUS, 200 MLXBF_BOOTCTL_FUSE_STATUS_KEYS); 201 if (key_state < 0) 202 return key_state; 203 204 /* 205 * key_state contains the bits for 4 Key versions, loaded from eFuses 206 * after a hard reset. Lower 4 bits are a thermometer code indicating 207 * key programming has started for key n (0000 = none, 0001 = version 0, 208 * 0011 = version 1, 0111 = version 2, 1111 = version 3). Upper 4 bits 209 * are a thermometer code indicating key programming has completed for 210 * key n (same encodings as the start bits). This allows for detection 211 * of an interruption in the progamming process which has left the key 212 * partially programmed (and thus invalid). The process is to burn the 213 * eFuse for the new key start bit, burn the key eFuses, then burn the 214 * eFuse for the new key complete bit. 215 * 216 * For example 0000_0000: no key valid, 0001_0001: key version 0 valid, 217 * 0011_0011: key 1 version valid, 0011_0111: key version 2 started 218 * programming but did not complete, etc. The most recent key for which 219 * both start and complete bit is set is loaded. On soft reset, this 220 * register is not modified. 221 */ 222 for (key = MLXBF_SB_KEY_NUM - 1; key >= 0; key--) { 223 burnt = key_state & BIT(key); 224 valid = key_state & BIT(key + MLXBF_SB_KEY_NUM); 225 226 if (burnt && valid) 227 upper_key_used = 1; 228 229 if (upper_key_used) { 230 if (burnt) 231 status = valid ? "Used" : "Wasted"; 232 else 233 status = valid ? "Invalid" : "Skipped"; 234 } else { 235 if (burnt) 236 status = valid ? "InUse" : "Incomplete"; 237 else 238 status = valid ? "Invalid" : "Free"; 239 } 240 buf_len += sprintf(buf + buf_len, "%d:%s ", key, status); 241 } 242 buf_len += sprintf(buf + buf_len, "\n"); 243 244 return buf_len; 245 } 246 247 static DEVICE_ATTR_RW(post_reset_wdog); 248 static DEVICE_ATTR_RW(reset_action); 249 static DEVICE_ATTR_RW(second_reset_action); 250 static DEVICE_ATTR_RO(lifecycle_state); 251 static DEVICE_ATTR_RO(secure_boot_fuse_state); 252 253 static struct attribute *mlxbf_bootctl_attrs[] = { 254 &dev_attr_post_reset_wdog.attr, 255 &dev_attr_reset_action.attr, 256 &dev_attr_second_reset_action.attr, 257 &dev_attr_lifecycle_state.attr, 258 &dev_attr_secure_boot_fuse_state.attr, 259 NULL 260 }; 261 262 ATTRIBUTE_GROUPS(mlxbf_bootctl); 263 264 static const struct acpi_device_id mlxbf_bootctl_acpi_ids[] = { 265 {"MLNXBF04", 0}, 266 {} 267 }; 268 269 MODULE_DEVICE_TABLE(acpi, mlxbf_bootctl_acpi_ids); 270 271 static bool mlxbf_bootctl_guid_match(const guid_t *guid, 272 const struct arm_smccc_res *res) 273 { 274 guid_t id = GUID_INIT(res->a0, res->a1, res->a1 >> 16, 275 res->a2, res->a2 >> 8, res->a2 >> 16, 276 res->a2 >> 24, res->a3, res->a3 >> 8, 277 res->a3 >> 16, res->a3 >> 24); 278 279 return guid_equal(guid, &id); 280 } 281 282 static int mlxbf_bootctl_probe(struct platform_device *pdev) 283 { 284 struct arm_smccc_res res = { 0 }; 285 guid_t guid; 286 int ret; 287 288 /* Ensure we have the UUID we expect for this service. */ 289 arm_smccc_smc(MLXBF_BOOTCTL_SIP_SVC_UID, 0, 0, 0, 0, 0, 0, 0, &res); 290 guid_parse(mlxbf_bootctl_svc_uuid_str, &guid); 291 if (!mlxbf_bootctl_guid_match(&guid, &res)) 292 return -ENODEV; 293 294 /* 295 * When watchdog is used, it sets boot mode to MLXBF_BOOTCTL_SWAP_EMMC 296 * in case of boot failures. However it doesn't clear the state if there 297 * is no failure. Restore the default boot mode here to avoid any 298 * unnecessary boot partition swapping. 299 */ 300 ret = mlxbf_bootctl_smc(MLXBF_BOOTCTL_SET_RESET_ACTION, 301 MLXBF_BOOTCTL_EMMC); 302 if (ret < 0) 303 dev_warn(&pdev->dev, "Unable to reset the EMMC boot mode\n"); 304 305 return 0; 306 } 307 308 static struct platform_driver mlxbf_bootctl_driver = { 309 .probe = mlxbf_bootctl_probe, 310 .driver = { 311 .name = "mlxbf-bootctl", 312 .dev_groups = mlxbf_bootctl_groups, 313 .acpi_match_table = mlxbf_bootctl_acpi_ids, 314 } 315 }; 316 317 module_platform_driver(mlxbf_bootctl_driver); 318 319 MODULE_DESCRIPTION("Mellanox boot control driver"); 320 MODULE_LICENSE("GPL v2"); 321 MODULE_AUTHOR("Mellanox Technologies"); 322