1 /* 2 * Support for configuration of IO Delay module found on Texas Instruments SoCs 3 * such as DRA7 4 * 5 * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ 6 * 7 * This file is licensed under the terms of the GNU General Public 8 * License version 2. This program is licensed "as is" without any 9 * warranty of any kind, whether express or implied. 10 */ 11 12 #include <linux/err.h> 13 #include <linux/init.h> 14 #include <linux/io.h> 15 #include <linux/module.h> 16 #include <linux/of.h> 17 #include <linux/of_device.h> 18 #include <linux/pinctrl/pinconf.h> 19 #include <linux/pinctrl/pinconf-generic.h> 20 #include <linux/pinctrl/pinctrl.h> 21 #include <linux/regmap.h> 22 #include <linux/slab.h> 23 24 #include "../core.h" 25 #include "../devicetree.h" 26 27 #define DRIVER_NAME "ti-iodelay" 28 29 /** 30 * struct ti_iodelay_reg_data - Describes the registers for the iodelay instance 31 * @signature_mask: CONFIG_REG mask for the signature bits (see TRM) 32 * @signature_value: CONFIG_REG signature value to be written (see TRM) 33 * @lock_mask: CONFIG_REG mask for the lock bits (see TRM) 34 * @lock_val: CONFIG_REG lock value for the lock bits (see TRM) 35 * @unlock_val:CONFIG_REG unlock value for the lock bits (see TRM) 36 * @binary_data_coarse_mask: CONFIG_REG coarse mask (see TRM) 37 * @binary_data_fine_mask: CONFIG_REG fine mask (see TRM) 38 * @reg_refclk_offset: Refclk register offset 39 * @refclk_period_mask: Refclk mask 40 * @reg_coarse_offset: Coarse register configuration offset 41 * @coarse_delay_count_mask: Coarse delay count mask 42 * @coarse_ref_count_mask: Coarse ref count mask 43 * @reg_fine_offset: Fine register configuration offset 44 * @fine_delay_count_mask: Fine delay count mask 45 * @fine_ref_count_mask: Fine ref count mask 46 * @reg_global_lock_offset: Global iodelay module lock register offset 47 * @global_lock_mask: Lock mask 48 * @global_unlock_val: Unlock value 49 * @global_lock_val: Lock value 50 * @reg_start_offset: Offset to iodelay registers after the CONFIG_REG_0 to 8 51 * @reg_nr_per_pin: Number of iodelay registers for each pin 52 * @regmap_config: Regmap configuration for the IODelay region 53 */ 54 struct ti_iodelay_reg_data { 55 u32 signature_mask; 56 u32 signature_value; 57 u32 lock_mask; 58 u32 lock_val; 59 u32 unlock_val; 60 u32 binary_data_coarse_mask; 61 u32 binary_data_fine_mask; 62 63 u32 reg_refclk_offset; 64 u32 refclk_period_mask; 65 66 u32 reg_coarse_offset; 67 u32 coarse_delay_count_mask; 68 u32 coarse_ref_count_mask; 69 70 u32 reg_fine_offset; 71 u32 fine_delay_count_mask; 72 u32 fine_ref_count_mask; 73 74 u32 reg_global_lock_offset; 75 u32 global_lock_mask; 76 u32 global_unlock_val; 77 u32 global_lock_val; 78 79 u32 reg_start_offset; 80 u32 reg_nr_per_pin; 81 82 struct regmap_config *regmap_config; 83 }; 84 85 /** 86 * struct ti_iodelay_reg_values - Computed io_reg configuration values (see TRM) 87 * @coarse_ref_count: Coarse reference count 88 * @coarse_delay_count: Coarse delay count 89 * @fine_ref_count: Fine reference count 90 * @fine_delay_count: Fine Delay count 91 * @ref_clk_period: Reference Clock period 92 * @cdpe: Coarse delay parameter 93 * @fdpe: Fine delay parameter 94 */ 95 struct ti_iodelay_reg_values { 96 u16 coarse_ref_count; 97 u16 coarse_delay_count; 98 99 u16 fine_ref_count; 100 u16 fine_delay_count; 101 102 u16 ref_clk_period; 103 104 u32 cdpe; 105 u32 fdpe; 106 }; 107 108 /** 109 * struct ti_iodelay_cfg - Description of each configuration parameters 110 * @offset: Configuration register offset 111 * @a_delay: Agnostic Delay (in ps) 112 * @g_delay: Gnostic Delay (in ps) 113 */ 114 struct ti_iodelay_cfg { 115 u16 offset; 116 u16 a_delay; 117 u16 g_delay; 118 }; 119 120 /** 121 * struct ti_iodelay_pingroup - Structure that describes one group 122 * @cfg: configuration array for the pin (from dt) 123 * @ncfg: number of configuration values allocated 124 * @config: pinconf "Config" - currently a dummy value 125 */ 126 struct ti_iodelay_pingroup { 127 struct ti_iodelay_cfg *cfg; 128 int ncfg; 129 unsigned long config; 130 }; 131 132 /** 133 * struct ti_iodelay_device - Represents information for a iodelay instance 134 * @dev: Device pointer 135 * @phys_base: Physical address base of the iodelay device 136 * @reg_base: Virtual address base of the iodelay device 137 * @regmap: Regmap for this iodelay instance 138 * @pctl: Pinctrl device 139 * @desc: pinctrl descriptor for pctl 140 * @pa: pinctrl pin wise description 141 * @reg_data: Register definition data for the IODelay instance 142 * @reg_init_conf_values: Initial configuration values. 143 */ 144 struct ti_iodelay_device { 145 struct device *dev; 146 unsigned long phys_base; 147 void __iomem *reg_base; 148 struct regmap *regmap; 149 150 struct pinctrl_dev *pctl; 151 struct pinctrl_desc desc; 152 struct pinctrl_pin_desc *pa; 153 154 const struct ti_iodelay_reg_data *reg_data; 155 struct ti_iodelay_reg_values reg_init_conf_values; 156 }; 157 158 /** 159 * ti_iodelay_extract() - extract bits for a field 160 * @val: Register value 161 * @mask: Mask 162 * 163 * Return: extracted value which is appropriately shifted 164 */ 165 static inline u32 ti_iodelay_extract(u32 val, u32 mask) 166 { 167 return (val & mask) >> __ffs(mask); 168 } 169 170 /** 171 * ti_iodelay_compute_dpe() - Compute equation for delay parameter 172 * @period: Period to use 173 * @ref: Reference Count 174 * @delay: Delay count 175 * @delay_m: Delay multiplier 176 * 177 * Return: Computed delay parameter 178 */ 179 static inline u32 ti_iodelay_compute_dpe(u16 period, u16 ref, u16 delay, 180 u16 delay_m) 181 { 182 u64 m, d; 183 184 /* Handle overflow conditions */ 185 m = 10 * (u64)period * (u64)ref; 186 d = 2 * (u64)delay * (u64)delay_m; 187 188 /* Truncate result back to 32 bits */ 189 return div64_u64(m, d); 190 } 191 192 /** 193 * ti_iodelay_pinconf_set() - Configure the pin configuration 194 * @iod: iodelay device 195 * @cfg: Configuration 196 * 197 * Update the configuration register as per TRM and lockup once done. 198 * *IMPORTANT NOTE* SoC TRM does recommend doing iodelay programmation only 199 * while in Isolation. But, then, isolation also implies that every pin 200 * on the SoC (including DDR) will be isolated out. The only benefit being 201 * a glitchless configuration, However, the intent of this driver is purely 202 * to support a "glitchy" configuration where applicable. 203 * 204 * Return: 0 in case of success, else appropriate error value 205 */ 206 static int ti_iodelay_pinconf_set(struct ti_iodelay_device *iod, 207 struct ti_iodelay_cfg *cfg) 208 { 209 const struct ti_iodelay_reg_data *reg = iod->reg_data; 210 struct ti_iodelay_reg_values *ival = &iod->reg_init_conf_values; 211 struct device *dev = iod->dev; 212 u32 g_delay_coarse, g_delay_fine; 213 u32 a_delay_coarse, a_delay_fine; 214 u32 c_elements, f_elements; 215 u32 total_delay; 216 u32 reg_mask, reg_val, tmp_val; 217 int r; 218 219 /* NOTE: Truncation is expected in all division below */ 220 g_delay_coarse = cfg->g_delay / 920; 221 g_delay_fine = ((cfg->g_delay % 920) * 10) / 60; 222 223 a_delay_coarse = cfg->a_delay / ival->cdpe; 224 a_delay_fine = ((cfg->a_delay % ival->cdpe) * 10) / ival->fdpe; 225 226 c_elements = g_delay_coarse + a_delay_coarse; 227 f_elements = (g_delay_fine + a_delay_fine) / 10; 228 229 if (f_elements > 22) { 230 total_delay = c_elements * ival->cdpe + f_elements * ival->fdpe; 231 c_elements = total_delay / ival->cdpe; 232 f_elements = (total_delay % ival->cdpe) / ival->fdpe; 233 } 234 235 reg_mask = reg->signature_mask; 236 reg_val = reg->signature_value << __ffs(reg->signature_mask); 237 238 reg_mask |= reg->binary_data_coarse_mask; 239 tmp_val = c_elements << __ffs(reg->binary_data_coarse_mask); 240 if (tmp_val & ~reg->binary_data_coarse_mask) { 241 dev_err(dev, "Masking overflow of coarse elements %08x\n", 242 tmp_val); 243 tmp_val &= reg->binary_data_coarse_mask; 244 } 245 reg_val |= tmp_val; 246 247 reg_mask |= reg->binary_data_fine_mask; 248 tmp_val = f_elements << __ffs(reg->binary_data_fine_mask); 249 if (tmp_val & ~reg->binary_data_fine_mask) { 250 dev_err(dev, "Masking overflow of fine elements %08x\n", 251 tmp_val); 252 tmp_val &= reg->binary_data_fine_mask; 253 } 254 reg_val |= tmp_val; 255 256 /* 257 * NOTE: we leave the iodelay values unlocked - this is to work around 258 * situations such as those found with mmc mode change. 259 * However, this leaves open any unwarranted changes to padconf register 260 * impacting iodelay configuration. Use with care! 261 */ 262 reg_mask |= reg->lock_mask; 263 reg_val |= reg->unlock_val << __ffs(reg->lock_mask); 264 r = regmap_update_bits(iod->regmap, cfg->offset, reg_mask, reg_val); 265 266 dev_dbg(dev, "Set reg 0x%x Delay(a: %d g: %d), Elements(C=%d F=%d)0x%x\n", 267 cfg->offset, cfg->a_delay, cfg->g_delay, c_elements, 268 f_elements, reg_val); 269 270 return r; 271 } 272 273 /** 274 * ti_iodelay_pinconf_init_dev() - Initialize IODelay device 275 * @iod: iodelay device 276 * 277 * Unlocks the iodelay region, computes the common parameters 278 * 279 * Return: 0 in case of success, else appropriate error value 280 */ 281 static int ti_iodelay_pinconf_init_dev(struct ti_iodelay_device *iod) 282 { 283 const struct ti_iodelay_reg_data *reg = iod->reg_data; 284 struct device *dev = iod->dev; 285 struct ti_iodelay_reg_values *ival = &iod->reg_init_conf_values; 286 u32 val; 287 int r; 288 289 /* unlock the iodelay region */ 290 r = regmap_update_bits(iod->regmap, reg->reg_global_lock_offset, 291 reg->global_lock_mask, reg->global_unlock_val); 292 if (r) 293 return r; 294 295 /* Read up Recalibration sequence done by bootloader */ 296 r = regmap_read(iod->regmap, reg->reg_refclk_offset, &val); 297 if (r) 298 return r; 299 ival->ref_clk_period = ti_iodelay_extract(val, reg->refclk_period_mask); 300 dev_dbg(dev, "refclk_period=0x%04x\n", ival->ref_clk_period); 301 302 r = regmap_read(iod->regmap, reg->reg_coarse_offset, &val); 303 if (r) 304 return r; 305 ival->coarse_ref_count = 306 ti_iodelay_extract(val, reg->coarse_ref_count_mask); 307 ival->coarse_delay_count = 308 ti_iodelay_extract(val, reg->coarse_delay_count_mask); 309 if (!ival->coarse_delay_count) { 310 dev_err(dev, "Invalid Coarse delay count (0) (reg=0x%08x)\n", 311 val); 312 return -EINVAL; 313 } 314 ival->cdpe = ti_iodelay_compute_dpe(ival->ref_clk_period, 315 ival->coarse_ref_count, 316 ival->coarse_delay_count, 88); 317 if (!ival->cdpe) { 318 dev_err(dev, "Invalid cdpe computed params = %d %d %d\n", 319 ival->ref_clk_period, ival->coarse_ref_count, 320 ival->coarse_delay_count); 321 return -EINVAL; 322 } 323 dev_dbg(iod->dev, "coarse: ref=0x%04x delay=0x%04x cdpe=0x%08x\n", 324 ival->coarse_ref_count, ival->coarse_delay_count, ival->cdpe); 325 326 r = regmap_read(iod->regmap, reg->reg_fine_offset, &val); 327 if (r) 328 return r; 329 ival->fine_ref_count = 330 ti_iodelay_extract(val, reg->fine_ref_count_mask); 331 ival->fine_delay_count = 332 ti_iodelay_extract(val, reg->fine_delay_count_mask); 333 if (!ival->fine_delay_count) { 334 dev_err(dev, "Invalid Fine delay count (0) (reg=0x%08x)\n", 335 val); 336 return -EINVAL; 337 } 338 ival->fdpe = ti_iodelay_compute_dpe(ival->ref_clk_period, 339 ival->fine_ref_count, 340 ival->fine_delay_count, 264); 341 if (!ival->fdpe) { 342 dev_err(dev, "Invalid fdpe(0) computed params = %d %d %d\n", 343 ival->ref_clk_period, ival->fine_ref_count, 344 ival->fine_delay_count); 345 return -EINVAL; 346 } 347 dev_dbg(iod->dev, "fine: ref=0x%04x delay=0x%04x fdpe=0x%08x\n", 348 ival->fine_ref_count, ival->fine_delay_count, ival->fdpe); 349 350 return 0; 351 } 352 353 /** 354 * ti_iodelay_pinconf_deinit_dev() - deinit the iodelay device 355 * @iod: IODelay device 356 * 357 * Deinitialize the IODelay device (basically just lock the region back up. 358 */ 359 static void ti_iodelay_pinconf_deinit_dev(struct ti_iodelay_device *iod) 360 { 361 const struct ti_iodelay_reg_data *reg = iod->reg_data; 362 363 /* lock the iodelay region back again */ 364 regmap_update_bits(iod->regmap, reg->reg_global_lock_offset, 365 reg->global_lock_mask, reg->global_lock_val); 366 } 367 368 /** 369 * ti_iodelay_get_pingroup() - Find the group mapped by a group selector 370 * @iod: iodelay device 371 * @selector: Group Selector 372 * 373 * Return: Corresponding group representing group selector 374 */ 375 static struct ti_iodelay_pingroup * 376 ti_iodelay_get_pingroup(struct ti_iodelay_device *iod, unsigned int selector) 377 { 378 struct group_desc *g; 379 380 g = pinctrl_generic_get_group(iod->pctl, selector); 381 if (!g) { 382 dev_err(iod->dev, "%s could not find pingroup %i\n", __func__, 383 selector); 384 385 return NULL; 386 } 387 388 return g->data; 389 } 390 391 /** 392 * ti_iodelay_offset_to_pin() - get a pin index based on the register offset 393 * @iod: iodelay driver instance 394 * @offset: register offset from the base 395 */ 396 static int ti_iodelay_offset_to_pin(struct ti_iodelay_device *iod, 397 unsigned int offset) 398 { 399 const struct ti_iodelay_reg_data *r = iod->reg_data; 400 unsigned int index; 401 402 if (offset > r->regmap_config->max_register) { 403 dev_err(iod->dev, "mux offset out of range: 0x%x (0x%x)\n", 404 offset, r->regmap_config->max_register); 405 return -EINVAL; 406 } 407 408 index = (offset - r->reg_start_offset) / r->regmap_config->reg_stride; 409 index /= r->reg_nr_per_pin; 410 411 return index; 412 } 413 414 /** 415 * ti_iodelay_node_iterator() - Iterate iodelay node 416 * @pctldev: Pin controller driver 417 * @np: Device node 418 * @pinctrl_spec: Parsed arguments from device tree 419 * @pins: Array of pins in the pin group 420 * @pin_index: Pin index in the pin array 421 * @data: Pin controller driver specific data 422 * 423 */ 424 static int ti_iodelay_node_iterator(struct pinctrl_dev *pctldev, 425 struct device_node *np, 426 const struct of_phandle_args *pinctrl_spec, 427 int *pins, int pin_index, void *data) 428 { 429 struct ti_iodelay_device *iod; 430 struct ti_iodelay_cfg *cfg = data; 431 const struct ti_iodelay_reg_data *r; 432 struct pinctrl_pin_desc *pd; 433 int pin; 434 435 iod = pinctrl_dev_get_drvdata(pctldev); 436 if (!iod) 437 return -EINVAL; 438 439 r = iod->reg_data; 440 441 if (pinctrl_spec->args_count < r->reg_nr_per_pin) { 442 dev_err(iod->dev, "invalid args_count for spec: %i\n", 443 pinctrl_spec->args_count); 444 445 return -EINVAL; 446 } 447 448 /* Index plus two value cells */ 449 cfg[pin_index].offset = pinctrl_spec->args[0]; 450 cfg[pin_index].a_delay = pinctrl_spec->args[1] & 0xffff; 451 cfg[pin_index].g_delay = pinctrl_spec->args[2] & 0xffff; 452 453 pin = ti_iodelay_offset_to_pin(iod, cfg[pin_index].offset); 454 if (pin < 0) { 455 dev_err(iod->dev, "could not add functions for %pOFn %ux\n", 456 np, cfg[pin_index].offset); 457 return -ENODEV; 458 } 459 pins[pin_index] = pin; 460 461 pd = &iod->pa[pin]; 462 pd->drv_data = &cfg[pin_index]; 463 464 dev_dbg(iod->dev, "%pOFn offset=%x a_delay = %d g_delay = %d\n", 465 np, cfg[pin_index].offset, cfg[pin_index].a_delay, 466 cfg[pin_index].g_delay); 467 468 return 0; 469 } 470 471 /** 472 * ti_iodelay_dt_node_to_map() - Map a device tree node to appropriate group 473 * @pctldev: pinctrl device representing IODelay device 474 * @np: Node Pointer (device tree) 475 * @map: Pinctrl Map returned back to pinctrl framework 476 * @num_maps: Number of maps (1) 477 * 478 * Maps the device tree description into a group of configuration parameters 479 * for iodelay block entry. 480 * 481 * Return: 0 in case of success, else appropriate error value 482 */ 483 static int ti_iodelay_dt_node_to_map(struct pinctrl_dev *pctldev, 484 struct device_node *np, 485 struct pinctrl_map **map, 486 unsigned int *num_maps) 487 { 488 struct ti_iodelay_device *iod; 489 struct ti_iodelay_cfg *cfg; 490 struct ti_iodelay_pingroup *g; 491 const char *name = "pinctrl-pin-array"; 492 int rows, *pins, error = -EINVAL, i; 493 494 iod = pinctrl_dev_get_drvdata(pctldev); 495 if (!iod) 496 return -EINVAL; 497 498 rows = pinctrl_count_index_with_args(np, name); 499 if (rows == -EINVAL) 500 return rows; 501 502 *map = devm_kzalloc(iod->dev, sizeof(**map), GFP_KERNEL); 503 if (!*map) 504 return -ENOMEM; 505 *num_maps = 0; 506 507 g = devm_kzalloc(iod->dev, sizeof(*g), GFP_KERNEL); 508 if (!g) { 509 error = -ENOMEM; 510 goto free_map; 511 } 512 513 pins = devm_kcalloc(iod->dev, rows, sizeof(*pins), GFP_KERNEL); 514 if (!pins) 515 goto free_group; 516 517 cfg = devm_kcalloc(iod->dev, rows, sizeof(*cfg), GFP_KERNEL); 518 if (!cfg) { 519 error = -ENOMEM; 520 goto free_pins; 521 } 522 523 for (i = 0; i < rows; i++) { 524 struct of_phandle_args pinctrl_spec; 525 526 error = pinctrl_parse_index_with_args(np, name, i, 527 &pinctrl_spec); 528 if (error) 529 goto free_data; 530 531 error = ti_iodelay_node_iterator(pctldev, np, &pinctrl_spec, 532 pins, i, cfg); 533 if (error) 534 goto free_data; 535 } 536 537 g->cfg = cfg; 538 g->ncfg = i; 539 g->config = PIN_CONFIG_END; 540 541 error = pinctrl_generic_add_group(iod->pctl, np->name, pins, i, g); 542 if (error < 0) 543 goto free_data; 544 545 (*map)->type = PIN_MAP_TYPE_CONFIGS_GROUP; 546 (*map)->data.configs.group_or_pin = np->name; 547 (*map)->data.configs.configs = &g->config; 548 (*map)->data.configs.num_configs = 1; 549 *num_maps = 1; 550 551 return 0; 552 553 free_data: 554 devm_kfree(iod->dev, cfg); 555 free_pins: 556 devm_kfree(iod->dev, pins); 557 free_group: 558 devm_kfree(iod->dev, g); 559 free_map: 560 devm_kfree(iod->dev, *map); 561 562 return error; 563 } 564 565 /** 566 * ti_iodelay_pinconf_group_get() - Get the group configuration 567 * @pctldev: pinctrl device representing IODelay device 568 * @selector: Group selector 569 * @config: Configuration returned 570 * 571 * Return: The configuration if the group is valid, else returns -EINVAL 572 */ 573 static int ti_iodelay_pinconf_group_get(struct pinctrl_dev *pctldev, 574 unsigned int selector, 575 unsigned long *config) 576 { 577 struct ti_iodelay_device *iod; 578 struct ti_iodelay_pingroup *group; 579 580 iod = pinctrl_dev_get_drvdata(pctldev); 581 group = ti_iodelay_get_pingroup(iod, selector); 582 583 if (!group) 584 return -EINVAL; 585 586 *config = group->config; 587 return 0; 588 } 589 590 /** 591 * ti_iodelay_pinconf_group_set() - Configure the groups of pins 592 * @pctldev: pinctrl device representing IODelay device 593 * @selector: Group selector 594 * @configs: Configurations 595 * @num_configs: Number of configurations 596 * 597 * Return: 0 if all went fine, else appropriate error value. 598 */ 599 static int ti_iodelay_pinconf_group_set(struct pinctrl_dev *pctldev, 600 unsigned int selector, 601 unsigned long *configs, 602 unsigned int num_configs) 603 { 604 struct ti_iodelay_device *iod; 605 struct device *dev; 606 struct ti_iodelay_pingroup *group; 607 int i; 608 609 iod = pinctrl_dev_get_drvdata(pctldev); 610 dev = iod->dev; 611 group = ti_iodelay_get_pingroup(iod, selector); 612 613 if (num_configs != 1) { 614 dev_err(dev, "Unsupported number of configurations %d\n", 615 num_configs); 616 return -EINVAL; 617 } 618 619 if (*configs != PIN_CONFIG_END) { 620 dev_err(dev, "Unsupported configuration\n"); 621 return -EINVAL; 622 } 623 624 for (i = 0; i < group->ncfg; i++) { 625 if (ti_iodelay_pinconf_set(iod, &group->cfg[i])) 626 return -ENOTSUPP; 627 } 628 629 return 0; 630 } 631 632 #ifdef CONFIG_DEBUG_FS 633 /** 634 * ti_iodelay_pin_to_offset() - get pin register offset based on the pin index 635 * @iod: iodelay driver instance 636 * @selector: Pin index 637 */ 638 static unsigned int ti_iodelay_pin_to_offset(struct ti_iodelay_device *iod, 639 unsigned int selector) 640 { 641 const struct ti_iodelay_reg_data *r = iod->reg_data; 642 unsigned int offset; 643 644 offset = selector * r->regmap_config->reg_stride; 645 offset *= r->reg_nr_per_pin; 646 offset += r->reg_start_offset; 647 648 return offset; 649 } 650 651 static void ti_iodelay_pin_dbg_show(struct pinctrl_dev *pctldev, 652 struct seq_file *s, 653 unsigned int pin) 654 { 655 struct ti_iodelay_device *iod; 656 struct pinctrl_pin_desc *pd; 657 struct ti_iodelay_cfg *cfg; 658 const struct ti_iodelay_reg_data *r; 659 unsigned long offset; 660 u32 in, oen, out; 661 662 iod = pinctrl_dev_get_drvdata(pctldev); 663 r = iod->reg_data; 664 665 offset = ti_iodelay_pin_to_offset(iod, pin); 666 pd = &iod->pa[pin]; 667 cfg = pd->drv_data; 668 669 regmap_read(iod->regmap, offset, &in); 670 regmap_read(iod->regmap, offset + r->regmap_config->reg_stride, &oen); 671 regmap_read(iod->regmap, offset + r->regmap_config->reg_stride * 2, 672 &out); 673 674 seq_printf(s, "%lx a: %i g: %i (%08x %08x %08x) %s ", 675 iod->phys_base + offset, 676 cfg ? cfg->a_delay : -1, 677 cfg ? cfg->g_delay : -1, 678 in, oen, out, DRIVER_NAME); 679 } 680 681 /** 682 * ti_iodelay_pinconf_group_dbg_show() - show the group information 683 * @pctldev: Show the group information 684 * @s: Sequence file 685 * @selector: Group selector 686 * 687 * Provide the configuration information of the selected group 688 */ 689 static void ti_iodelay_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, 690 struct seq_file *s, 691 unsigned int selector) 692 { 693 struct ti_iodelay_device *iod; 694 struct ti_iodelay_pingroup *group; 695 int i; 696 697 iod = pinctrl_dev_get_drvdata(pctldev); 698 group = ti_iodelay_get_pingroup(iod, selector); 699 if (!group) 700 return; 701 702 for (i = 0; i < group->ncfg; i++) { 703 struct ti_iodelay_cfg *cfg; 704 u32 reg = 0; 705 706 cfg = &group->cfg[i]; 707 regmap_read(iod->regmap, cfg->offset, ®), 708 seq_printf(s, "\n\t0x%08x = 0x%08x (%3d, %3d)", 709 cfg->offset, reg, cfg->a_delay, 710 cfg->g_delay); 711 } 712 } 713 #endif 714 715 static const struct pinctrl_ops ti_iodelay_pinctrl_ops = { 716 .get_groups_count = pinctrl_generic_get_group_count, 717 .get_group_name = pinctrl_generic_get_group_name, 718 .get_group_pins = pinctrl_generic_get_group_pins, 719 #ifdef CONFIG_DEBUG_FS 720 .pin_dbg_show = ti_iodelay_pin_dbg_show, 721 #endif 722 .dt_node_to_map = ti_iodelay_dt_node_to_map, 723 }; 724 725 static const struct pinconf_ops ti_iodelay_pinctrl_pinconf_ops = { 726 .pin_config_group_get = ti_iodelay_pinconf_group_get, 727 .pin_config_group_set = ti_iodelay_pinconf_group_set, 728 #ifdef CONFIG_DEBUG_FS 729 .pin_config_group_dbg_show = ti_iodelay_pinconf_group_dbg_show, 730 #endif 731 }; 732 733 /** 734 * ti_iodelay_alloc_pins() - Allocate structures needed for pins for iodelay 735 * @dev: Device pointer 736 * @iod: iodelay device 737 * @base_phy: Base Physical Address 738 * 739 * Return: 0 if all went fine, else appropriate error value. 740 */ 741 static int ti_iodelay_alloc_pins(struct device *dev, 742 struct ti_iodelay_device *iod, u32 base_phy) 743 { 744 const struct ti_iodelay_reg_data *r = iod->reg_data; 745 struct pinctrl_pin_desc *pin; 746 u32 phy_reg; 747 int nr_pins, i; 748 749 nr_pins = ti_iodelay_offset_to_pin(iod, r->regmap_config->max_register); 750 dev_dbg(dev, "Allocating %i pins\n", nr_pins); 751 752 iod->pa = devm_kcalloc(dev, nr_pins, sizeof(*iod->pa), GFP_KERNEL); 753 if (!iod->pa) 754 return -ENOMEM; 755 756 iod->desc.pins = iod->pa; 757 iod->desc.npins = nr_pins; 758 759 phy_reg = r->reg_start_offset + base_phy; 760 761 for (i = 0; i < nr_pins; i++, phy_reg += 4) { 762 pin = &iod->pa[i]; 763 pin->number = i; 764 } 765 766 return 0; 767 } 768 769 static struct regmap_config dra7_iodelay_regmap_config = { 770 .reg_bits = 32, 771 .reg_stride = 4, 772 .val_bits = 32, 773 .max_register = 0xd1c, 774 }; 775 776 static struct ti_iodelay_reg_data dra7_iodelay_data = { 777 .signature_mask = 0x0003f000, 778 .signature_value = 0x29, 779 .lock_mask = 0x00000400, 780 .lock_val = 1, 781 .unlock_val = 0, 782 .binary_data_coarse_mask = 0x000003e0, 783 .binary_data_fine_mask = 0x0000001f, 784 785 .reg_refclk_offset = 0x14, 786 .refclk_period_mask = 0xffff, 787 788 .reg_coarse_offset = 0x18, 789 .coarse_delay_count_mask = 0xffff0000, 790 .coarse_ref_count_mask = 0x0000ffff, 791 792 .reg_fine_offset = 0x1C, 793 .fine_delay_count_mask = 0xffff0000, 794 .fine_ref_count_mask = 0x0000ffff, 795 796 .reg_global_lock_offset = 0x2c, 797 .global_lock_mask = 0x0000ffff, 798 .global_unlock_val = 0x0000aaaa, 799 .global_lock_val = 0x0000aaab, 800 801 .reg_start_offset = 0x30, 802 .reg_nr_per_pin = 3, 803 .regmap_config = &dra7_iodelay_regmap_config, 804 }; 805 806 static const struct of_device_id ti_iodelay_of_match[] = { 807 {.compatible = "ti,dra7-iodelay", .data = &dra7_iodelay_data}, 808 { /* Hopefully no more.. */ }, 809 }; 810 MODULE_DEVICE_TABLE(of, ti_iodelay_of_match); 811 812 /** 813 * ti_iodelay_probe() - Standard probe 814 * @pdev: platform device 815 * 816 * Return: 0 if all went fine, else appropriate error value. 817 */ 818 static int ti_iodelay_probe(struct platform_device *pdev) 819 { 820 struct device *dev = &pdev->dev; 821 struct device_node *np = of_node_get(dev->of_node); 822 const struct of_device_id *match; 823 struct resource *res; 824 struct ti_iodelay_device *iod; 825 int ret = 0; 826 827 if (!np) { 828 ret = -EINVAL; 829 dev_err(dev, "No OF node\n"); 830 goto exit_out; 831 } 832 833 match = of_match_device(ti_iodelay_of_match, dev); 834 if (!match) { 835 ret = -EINVAL; 836 dev_err(dev, "No DATA match\n"); 837 goto exit_out; 838 } 839 840 iod = devm_kzalloc(dev, sizeof(*iod), GFP_KERNEL); 841 if (!iod) { 842 ret = -ENOMEM; 843 goto exit_out; 844 } 845 iod->dev = dev; 846 iod->reg_data = match->data; 847 848 /* So far We can assume there is only 1 bank of registers */ 849 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 850 if (!res) { 851 dev_err(dev, "Missing MEM resource\n"); 852 ret = -ENODEV; 853 goto exit_out; 854 } 855 856 iod->phys_base = res->start; 857 iod->reg_base = devm_ioremap_resource(dev, res); 858 if (IS_ERR(iod->reg_base)) { 859 ret = PTR_ERR(iod->reg_base); 860 goto exit_out; 861 } 862 863 iod->regmap = devm_regmap_init_mmio(dev, iod->reg_base, 864 iod->reg_data->regmap_config); 865 if (IS_ERR(iod->regmap)) { 866 dev_err(dev, "Regmap MMIO init failed.\n"); 867 ret = PTR_ERR(iod->regmap); 868 goto exit_out; 869 } 870 871 if (ti_iodelay_pinconf_init_dev(iod)) 872 goto exit_out; 873 874 ret = ti_iodelay_alloc_pins(dev, iod, res->start); 875 if (ret) 876 goto exit_out; 877 878 iod->desc.pctlops = &ti_iodelay_pinctrl_ops; 879 /* no pinmux ops - we are pinconf */ 880 iod->desc.confops = &ti_iodelay_pinctrl_pinconf_ops; 881 iod->desc.name = dev_name(dev); 882 iod->desc.owner = THIS_MODULE; 883 884 ret = pinctrl_register_and_init(&iod->desc, dev, iod, &iod->pctl); 885 if (ret) { 886 dev_err(dev, "Failed to register pinctrl\n"); 887 goto exit_out; 888 } 889 890 platform_set_drvdata(pdev, iod); 891 892 return pinctrl_enable(iod->pctl); 893 894 exit_out: 895 of_node_put(np); 896 return ret; 897 } 898 899 /** 900 * ti_iodelay_remove() - standard remove 901 * @pdev: platform device 902 * 903 * Return: 0 if all went fine, else appropriate error value. 904 */ 905 static int ti_iodelay_remove(struct platform_device *pdev) 906 { 907 struct ti_iodelay_device *iod = platform_get_drvdata(pdev); 908 909 if (!iod) 910 return 0; 911 912 if (iod->pctl) 913 pinctrl_unregister(iod->pctl); 914 915 ti_iodelay_pinconf_deinit_dev(iod); 916 917 /* Expect other allocations to be freed by devm */ 918 919 return 0; 920 } 921 922 static struct platform_driver ti_iodelay_driver = { 923 .probe = ti_iodelay_probe, 924 .remove = ti_iodelay_remove, 925 .driver = { 926 .name = DRIVER_NAME, 927 .of_match_table = ti_iodelay_of_match, 928 }, 929 }; 930 module_platform_driver(ti_iodelay_driver); 931 932 MODULE_AUTHOR("Texas Instruments, Inc."); 933 MODULE_DESCRIPTION("Pinconf driver for TI's IO Delay module"); 934 MODULE_LICENSE("GPL v2"); 935