1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // S3C64xx specific support for pinctrl-samsung driver. 4 // 5 // Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> 6 // 7 // Based on pinctrl-exynos.c, please see the file for original copyrights. 8 // 9 // This file contains the Samsung S3C64xx specific information required by the 10 // the Samsung pinctrl/gpiolib driver. It also includes the implementation of 11 // external gpio and wakeup interrupt support. 12 13 #include <linux/init.h> 14 #include <linux/device.h> 15 #include <linux/interrupt.h> 16 #include <linux/irqdomain.h> 17 #include <linux/irq.h> 18 #include <linux/of_irq.h> 19 #include <linux/io.h> 20 #include <linux/irqchip/chained_irq.h> 21 #include <linux/slab.h> 22 #include <linux/err.h> 23 24 #include "pinctrl-samsung.h" 25 26 #define NUM_EINT0 28 27 #define NUM_EINT0_IRQ 4 28 #define EINT_MAX_PER_REG 16 29 #define EINT_MAX_PER_GROUP 16 30 31 /* External GPIO and wakeup interrupt related definitions */ 32 #define SVC_GROUP_SHIFT 4 33 #define SVC_GROUP_MASK 0xf 34 #define SVC_NUM_MASK 0xf 35 #define SVC_GROUP(x) ((x >> SVC_GROUP_SHIFT) & \ 36 SVC_GROUP_MASK) 37 38 #define EINT12CON_REG 0x200 39 #define EINT12MASK_REG 0x240 40 #define EINT12PEND_REG 0x260 41 42 #define EINT_OFFS(i) ((i) % (2 * EINT_MAX_PER_GROUP)) 43 #define EINT_GROUP(i) ((i) / EINT_MAX_PER_GROUP) 44 #define EINT_REG(g) (4 * ((g) / 2)) 45 46 #define EINTCON_REG(i) (EINT12CON_REG + EINT_REG(EINT_GROUP(i))) 47 #define EINTMASK_REG(i) (EINT12MASK_REG + EINT_REG(EINT_GROUP(i))) 48 #define EINTPEND_REG(i) (EINT12PEND_REG + EINT_REG(EINT_GROUP(i))) 49 50 #define SERVICE_REG 0x284 51 #define SERVICEPEND_REG 0x288 52 53 #define EINT0CON0_REG 0x900 54 #define EINT0MASK_REG 0x920 55 #define EINT0PEND_REG 0x924 56 57 /* S3C64xx specific external interrupt trigger types */ 58 #define EINT_LEVEL_LOW 0 59 #define EINT_LEVEL_HIGH 1 60 #define EINT_EDGE_FALLING 2 61 #define EINT_EDGE_RISING 4 62 #define EINT_EDGE_BOTH 6 63 #define EINT_CON_MASK 0xF 64 #define EINT_CON_LEN 4 65 66 static const struct samsung_pin_bank_type bank_type_4bit_off = { 67 .fld_width = { 4, 1, 2, 0, 2, 2, }, 68 .reg_offset = { 0x00, 0x04, 0x08, 0, 0x0c, 0x10, }, 69 }; 70 71 static const struct samsung_pin_bank_type bank_type_4bit_alive = { 72 .fld_width = { 4, 1, 2, }, 73 .reg_offset = { 0x00, 0x04, 0x08, }, 74 }; 75 76 static const struct samsung_pin_bank_type bank_type_4bit2_off = { 77 .fld_width = { 4, 1, 2, 0, 2, 2, }, 78 .reg_offset = { 0x00, 0x08, 0x0c, 0, 0x10, 0x14, }, 79 }; 80 81 static const struct samsung_pin_bank_type bank_type_4bit2_alive = { 82 .fld_width = { 4, 1, 2, }, 83 .reg_offset = { 0x00, 0x08, 0x0c, }, 84 }; 85 86 static const struct samsung_pin_bank_type bank_type_2bit_off = { 87 .fld_width = { 2, 1, 2, 0, 2, 2, }, 88 .reg_offset = { 0x00, 0x04, 0x08, 0, 0x0c, 0x10, }, 89 }; 90 91 static const struct samsung_pin_bank_type bank_type_2bit_alive = { 92 .fld_width = { 2, 1, 2, }, 93 .reg_offset = { 0x00, 0x04, 0x08, }, 94 }; 95 96 #define PIN_BANK_4BIT(pins, reg, id) \ 97 { \ 98 .type = &bank_type_4bit_off, \ 99 .pctl_offset = reg, \ 100 .nr_pins = pins, \ 101 .eint_type = EINT_TYPE_NONE, \ 102 .name = id \ 103 } 104 105 #define PIN_BANK_4BIT_EINTG(pins, reg, id, eoffs) \ 106 { \ 107 .type = &bank_type_4bit_off, \ 108 .pctl_offset = reg, \ 109 .nr_pins = pins, \ 110 .eint_type = EINT_TYPE_GPIO, \ 111 .eint_func = 7, \ 112 .eint_mask = (1 << (pins)) - 1, \ 113 .eint_offset = eoffs, \ 114 .name = id \ 115 } 116 117 #define PIN_BANK_4BIT_EINTW(pins, reg, id, eoffs, emask) \ 118 { \ 119 .type = &bank_type_4bit_alive,\ 120 .pctl_offset = reg, \ 121 .nr_pins = pins, \ 122 .eint_type = EINT_TYPE_WKUP, \ 123 .eint_func = 3, \ 124 .eint_mask = emask, \ 125 .eint_offset = eoffs, \ 126 .name = id \ 127 } 128 129 #define PIN_BANK_4BIT2_EINTG(pins, reg, id, eoffs) \ 130 { \ 131 .type = &bank_type_4bit2_off, \ 132 .pctl_offset = reg, \ 133 .nr_pins = pins, \ 134 .eint_type = EINT_TYPE_GPIO, \ 135 .eint_func = 7, \ 136 .eint_mask = (1 << (pins)) - 1, \ 137 .eint_offset = eoffs, \ 138 .name = id \ 139 } 140 141 #define PIN_BANK_4BIT2_EINTW(pins, reg, id, eoffs, emask) \ 142 { \ 143 .type = &bank_type_4bit2_alive,\ 144 .pctl_offset = reg, \ 145 .nr_pins = pins, \ 146 .eint_type = EINT_TYPE_WKUP, \ 147 .eint_func = 3, \ 148 .eint_mask = emask, \ 149 .eint_offset = eoffs, \ 150 .name = id \ 151 } 152 153 #define PIN_BANK_4BIT2_ALIVE(pins, reg, id) \ 154 { \ 155 .type = &bank_type_4bit2_alive,\ 156 .pctl_offset = reg, \ 157 .nr_pins = pins, \ 158 .eint_type = EINT_TYPE_NONE, \ 159 .name = id \ 160 } 161 162 #define PIN_BANK_2BIT(pins, reg, id) \ 163 { \ 164 .type = &bank_type_2bit_off, \ 165 .pctl_offset = reg, \ 166 .nr_pins = pins, \ 167 .eint_type = EINT_TYPE_NONE, \ 168 .name = id \ 169 } 170 171 #define PIN_BANK_2BIT_EINTG(pins, reg, id, eoffs, emask) \ 172 { \ 173 .type = &bank_type_2bit_off, \ 174 .pctl_offset = reg, \ 175 .nr_pins = pins, \ 176 .eint_type = EINT_TYPE_GPIO, \ 177 .eint_func = 3, \ 178 .eint_mask = emask, \ 179 .eint_offset = eoffs, \ 180 .name = id \ 181 } 182 183 #define PIN_BANK_2BIT_EINTW(pins, reg, id, eoffs) \ 184 { \ 185 .type = &bank_type_2bit_alive,\ 186 .pctl_offset = reg, \ 187 .nr_pins = pins, \ 188 .eint_type = EINT_TYPE_WKUP, \ 189 .eint_func = 2, \ 190 .eint_mask = (1 << (pins)) - 1, \ 191 .eint_offset = eoffs, \ 192 .name = id \ 193 } 194 195 /** 196 * struct s3c64xx_eint0_data: EINT0 common data 197 * @drvdata: pin controller driver data 198 * @domains: IRQ domains of particular EINT0 interrupts 199 * @pins: pin offsets inside of banks of particular EINT0 interrupts 200 */ 201 struct s3c64xx_eint0_data { 202 struct samsung_pinctrl_drv_data *drvdata; 203 struct irq_domain *domains[NUM_EINT0]; 204 u8 pins[NUM_EINT0]; 205 }; 206 207 /** 208 * struct s3c64xx_eint0_domain_data: EINT0 per-domain data 209 * @bank: pin bank related to the domain 210 * @eints: EINT0 interrupts related to the domain 211 */ 212 struct s3c64xx_eint0_domain_data { 213 struct samsung_pin_bank *bank; 214 u8 eints[]; 215 }; 216 217 /** 218 * struct s3c64xx_eint_gpio_data: GPIO EINT data 219 * @drvdata: pin controller driver data 220 * @domains: array of domains related to EINT interrupt groups 221 */ 222 struct s3c64xx_eint_gpio_data { 223 struct samsung_pinctrl_drv_data *drvdata; 224 struct irq_domain *domains[]; 225 }; 226 227 /* 228 * Common functions for S3C64xx EINT configuration 229 */ 230 231 static int s3c64xx_irq_get_trigger(unsigned int type) 232 { 233 int trigger; 234 235 switch (type) { 236 case IRQ_TYPE_EDGE_RISING: 237 trigger = EINT_EDGE_RISING; 238 break; 239 case IRQ_TYPE_EDGE_FALLING: 240 trigger = EINT_EDGE_FALLING; 241 break; 242 case IRQ_TYPE_EDGE_BOTH: 243 trigger = EINT_EDGE_BOTH; 244 break; 245 case IRQ_TYPE_LEVEL_HIGH: 246 trigger = EINT_LEVEL_HIGH; 247 break; 248 case IRQ_TYPE_LEVEL_LOW: 249 trigger = EINT_LEVEL_LOW; 250 break; 251 default: 252 return -EINVAL; 253 } 254 255 return trigger; 256 } 257 258 static void s3c64xx_irq_set_handler(struct irq_data *d, unsigned int type) 259 { 260 /* Edge- and level-triggered interrupts need different handlers */ 261 if (type & IRQ_TYPE_EDGE_BOTH) 262 irq_set_handler_locked(d, handle_edge_irq); 263 else 264 irq_set_handler_locked(d, handle_level_irq); 265 } 266 267 static void s3c64xx_irq_set_function(struct samsung_pinctrl_drv_data *d, 268 struct samsung_pin_bank *bank, int pin) 269 { 270 const struct samsung_pin_bank_type *bank_type = bank->type; 271 unsigned long flags; 272 void __iomem *reg; 273 u8 shift; 274 u32 mask; 275 u32 val; 276 277 /* Make sure that pin is configured as interrupt */ 278 reg = d->virt_base + bank->pctl_offset; 279 shift = pin; 280 if (bank_type->fld_width[PINCFG_TYPE_FUNC] * shift >= 32) { 281 /* 4-bit bank type with 2 con regs */ 282 reg += 4; 283 shift -= 8; 284 } 285 286 shift = shift * bank_type->fld_width[PINCFG_TYPE_FUNC]; 287 mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1; 288 289 spin_lock_irqsave(&bank->slock, flags); 290 291 val = readl(reg); 292 val &= ~(mask << shift); 293 val |= bank->eint_func << shift; 294 writel(val, reg); 295 296 spin_unlock_irqrestore(&bank->slock, flags); 297 } 298 299 /* 300 * Functions for EINT GPIO configuration (EINT groups 1-9) 301 */ 302 303 static inline void s3c64xx_gpio_irq_set_mask(struct irq_data *irqd, bool mask) 304 { 305 struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); 306 struct samsung_pinctrl_drv_data *d = bank->drvdata; 307 unsigned char index = EINT_OFFS(bank->eint_offset) + irqd->hwirq; 308 void __iomem *reg = d->virt_base + EINTMASK_REG(bank->eint_offset); 309 u32 val; 310 311 val = readl(reg); 312 if (mask) 313 val |= 1 << index; 314 else 315 val &= ~(1 << index); 316 writel(val, reg); 317 } 318 319 static void s3c64xx_gpio_irq_unmask(struct irq_data *irqd) 320 { 321 s3c64xx_gpio_irq_set_mask(irqd, false); 322 } 323 324 static void s3c64xx_gpio_irq_mask(struct irq_data *irqd) 325 { 326 s3c64xx_gpio_irq_set_mask(irqd, true); 327 } 328 329 static void s3c64xx_gpio_irq_ack(struct irq_data *irqd) 330 { 331 struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); 332 struct samsung_pinctrl_drv_data *d = bank->drvdata; 333 unsigned char index = EINT_OFFS(bank->eint_offset) + irqd->hwirq; 334 void __iomem *reg = d->virt_base + EINTPEND_REG(bank->eint_offset); 335 336 writel(1 << index, reg); 337 } 338 339 static int s3c64xx_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) 340 { 341 struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); 342 struct samsung_pinctrl_drv_data *d = bank->drvdata; 343 void __iomem *reg; 344 int trigger; 345 u8 shift; 346 u32 val; 347 348 trigger = s3c64xx_irq_get_trigger(type); 349 if (trigger < 0) { 350 pr_err("unsupported external interrupt type\n"); 351 return -EINVAL; 352 } 353 354 s3c64xx_irq_set_handler(irqd, type); 355 356 /* Set up interrupt trigger */ 357 reg = d->virt_base + EINTCON_REG(bank->eint_offset); 358 shift = EINT_OFFS(bank->eint_offset) + irqd->hwirq; 359 shift = 4 * (shift / 4); /* 4 EINTs per trigger selector */ 360 361 val = readl(reg); 362 val &= ~(EINT_CON_MASK << shift); 363 val |= trigger << shift; 364 writel(val, reg); 365 366 s3c64xx_irq_set_function(d, bank, irqd->hwirq); 367 368 return 0; 369 } 370 371 /* 372 * irq_chip for gpio interrupts. 373 */ 374 static struct irq_chip s3c64xx_gpio_irq_chip = { 375 .name = "GPIO", 376 .irq_unmask = s3c64xx_gpio_irq_unmask, 377 .irq_mask = s3c64xx_gpio_irq_mask, 378 .irq_ack = s3c64xx_gpio_irq_ack, 379 .irq_set_type = s3c64xx_gpio_irq_set_type, 380 }; 381 382 static int s3c64xx_gpio_irq_map(struct irq_domain *h, unsigned int virq, 383 irq_hw_number_t hw) 384 { 385 struct samsung_pin_bank *bank = h->host_data; 386 387 if (!(bank->eint_mask & (1 << hw))) 388 return -EINVAL; 389 390 irq_set_chip_and_handler(virq, 391 &s3c64xx_gpio_irq_chip, handle_level_irq); 392 irq_set_chip_data(virq, bank); 393 394 return 0; 395 } 396 397 /* 398 * irq domain callbacks for external gpio interrupt controller. 399 */ 400 static const struct irq_domain_ops s3c64xx_gpio_irqd_ops = { 401 .map = s3c64xx_gpio_irq_map, 402 .xlate = irq_domain_xlate_twocell, 403 }; 404 405 static void s3c64xx_eint_gpio_irq(struct irq_desc *desc) 406 { 407 struct irq_chip *chip = irq_desc_get_chip(desc); 408 struct s3c64xx_eint_gpio_data *data = irq_desc_get_handler_data(desc); 409 struct samsung_pinctrl_drv_data *drvdata = data->drvdata; 410 411 chained_irq_enter(chip, desc); 412 413 do { 414 unsigned int svc; 415 unsigned int group; 416 unsigned int pin; 417 unsigned int virq; 418 419 svc = readl(drvdata->virt_base + SERVICE_REG); 420 group = SVC_GROUP(svc); 421 pin = svc & SVC_NUM_MASK; 422 423 if (!group) 424 break; 425 426 /* Group 1 is used for two pin banks */ 427 if (group == 1) { 428 if (pin < 8) 429 group = 0; 430 else 431 pin -= 8; 432 } 433 434 virq = irq_linear_revmap(data->domains[group], pin); 435 /* 436 * Something must be really wrong if an unmapped EINT 437 * was unmasked... 438 */ 439 BUG_ON(!virq); 440 441 generic_handle_irq(virq); 442 } while (1); 443 444 chained_irq_exit(chip, desc); 445 } 446 447 /** 448 * s3c64xx_eint_gpio_init() - setup handling of external gpio interrupts. 449 * @d: driver data of samsung pinctrl driver. 450 */ 451 static int s3c64xx_eint_gpio_init(struct samsung_pinctrl_drv_data *d) 452 { 453 struct s3c64xx_eint_gpio_data *data; 454 struct samsung_pin_bank *bank; 455 struct device *dev = d->dev; 456 unsigned int nr_domains; 457 unsigned int i; 458 459 if (!d->irq) { 460 dev_err(dev, "irq number not available\n"); 461 return -EINVAL; 462 } 463 464 nr_domains = 0; 465 bank = d->pin_banks; 466 for (i = 0; i < d->nr_banks; ++i, ++bank) { 467 unsigned int nr_eints; 468 unsigned int mask; 469 470 if (bank->eint_type != EINT_TYPE_GPIO) 471 continue; 472 473 mask = bank->eint_mask; 474 nr_eints = fls(mask); 475 476 bank->irq_domain = irq_domain_add_linear(bank->of_node, 477 nr_eints, &s3c64xx_gpio_irqd_ops, bank); 478 if (!bank->irq_domain) { 479 dev_err(dev, "gpio irq domain add failed\n"); 480 return -ENXIO; 481 } 482 483 ++nr_domains; 484 } 485 486 data = devm_kzalloc(dev, struct_size(data, domains, nr_domains), 487 GFP_KERNEL); 488 if (!data) 489 return -ENOMEM; 490 data->drvdata = d; 491 492 bank = d->pin_banks; 493 nr_domains = 0; 494 for (i = 0; i < d->nr_banks; ++i, ++bank) { 495 if (bank->eint_type != EINT_TYPE_GPIO) 496 continue; 497 498 data->domains[nr_domains++] = bank->irq_domain; 499 } 500 501 irq_set_chained_handler_and_data(d->irq, s3c64xx_eint_gpio_irq, data); 502 503 return 0; 504 } 505 506 /* 507 * Functions for configuration of EINT0 wake-up interrupts 508 */ 509 510 static inline void s3c64xx_eint0_irq_set_mask(struct irq_data *irqd, bool mask) 511 { 512 struct s3c64xx_eint0_domain_data *ddata = 513 irq_data_get_irq_chip_data(irqd); 514 struct samsung_pinctrl_drv_data *d = ddata->bank->drvdata; 515 u32 val; 516 517 val = readl(d->virt_base + EINT0MASK_REG); 518 if (mask) 519 val |= 1 << ddata->eints[irqd->hwirq]; 520 else 521 val &= ~(1 << ddata->eints[irqd->hwirq]); 522 writel(val, d->virt_base + EINT0MASK_REG); 523 } 524 525 static void s3c64xx_eint0_irq_unmask(struct irq_data *irqd) 526 { 527 s3c64xx_eint0_irq_set_mask(irqd, false); 528 } 529 530 static void s3c64xx_eint0_irq_mask(struct irq_data *irqd) 531 { 532 s3c64xx_eint0_irq_set_mask(irqd, true); 533 } 534 535 static void s3c64xx_eint0_irq_ack(struct irq_data *irqd) 536 { 537 struct s3c64xx_eint0_domain_data *ddata = 538 irq_data_get_irq_chip_data(irqd); 539 struct samsung_pinctrl_drv_data *d = ddata->bank->drvdata; 540 541 writel(1 << ddata->eints[irqd->hwirq], 542 d->virt_base + EINT0PEND_REG); 543 } 544 545 static int s3c64xx_eint0_irq_set_type(struct irq_data *irqd, unsigned int type) 546 { 547 struct s3c64xx_eint0_domain_data *ddata = 548 irq_data_get_irq_chip_data(irqd); 549 struct samsung_pin_bank *bank = ddata->bank; 550 struct samsung_pinctrl_drv_data *d = bank->drvdata; 551 void __iomem *reg; 552 int trigger; 553 u8 shift; 554 u32 val; 555 556 trigger = s3c64xx_irq_get_trigger(type); 557 if (trigger < 0) { 558 pr_err("unsupported external interrupt type\n"); 559 return -EINVAL; 560 } 561 562 s3c64xx_irq_set_handler(irqd, type); 563 564 /* Set up interrupt trigger */ 565 reg = d->virt_base + EINT0CON0_REG; 566 shift = ddata->eints[irqd->hwirq]; 567 if (shift >= EINT_MAX_PER_REG) { 568 reg += 4; 569 shift -= EINT_MAX_PER_REG; 570 } 571 shift = EINT_CON_LEN * (shift / 2); 572 573 val = readl(reg); 574 val &= ~(EINT_CON_MASK << shift); 575 val |= trigger << shift; 576 writel(val, reg); 577 578 s3c64xx_irq_set_function(d, bank, irqd->hwirq); 579 580 return 0; 581 } 582 583 /* 584 * irq_chip for wakeup interrupts 585 */ 586 static struct irq_chip s3c64xx_eint0_irq_chip = { 587 .name = "EINT0", 588 .irq_unmask = s3c64xx_eint0_irq_unmask, 589 .irq_mask = s3c64xx_eint0_irq_mask, 590 .irq_ack = s3c64xx_eint0_irq_ack, 591 .irq_set_type = s3c64xx_eint0_irq_set_type, 592 }; 593 594 static inline void s3c64xx_irq_demux_eint(struct irq_desc *desc, u32 range) 595 { 596 struct irq_chip *chip = irq_desc_get_chip(desc); 597 struct s3c64xx_eint0_data *data = irq_desc_get_handler_data(desc); 598 struct samsung_pinctrl_drv_data *drvdata = data->drvdata; 599 unsigned int pend, mask; 600 601 chained_irq_enter(chip, desc); 602 603 pend = readl(drvdata->virt_base + EINT0PEND_REG); 604 mask = readl(drvdata->virt_base + EINT0MASK_REG); 605 606 pend = pend & range & ~mask; 607 pend &= range; 608 609 while (pend) { 610 unsigned int virq, irq; 611 612 irq = fls(pend) - 1; 613 pend &= ~(1 << irq); 614 virq = irq_linear_revmap(data->domains[irq], data->pins[irq]); 615 /* 616 * Something must be really wrong if an unmapped EINT 617 * was unmasked... 618 */ 619 BUG_ON(!virq); 620 621 generic_handle_irq(virq); 622 } 623 624 chained_irq_exit(chip, desc); 625 } 626 627 static void s3c64xx_demux_eint0_3(struct irq_desc *desc) 628 { 629 s3c64xx_irq_demux_eint(desc, 0xf); 630 } 631 632 static void s3c64xx_demux_eint4_11(struct irq_desc *desc) 633 { 634 s3c64xx_irq_demux_eint(desc, 0xff0); 635 } 636 637 static void s3c64xx_demux_eint12_19(struct irq_desc *desc) 638 { 639 s3c64xx_irq_demux_eint(desc, 0xff000); 640 } 641 642 static void s3c64xx_demux_eint20_27(struct irq_desc *desc) 643 { 644 s3c64xx_irq_demux_eint(desc, 0xff00000); 645 } 646 647 static irq_flow_handler_t s3c64xx_eint0_handlers[NUM_EINT0_IRQ] = { 648 s3c64xx_demux_eint0_3, 649 s3c64xx_demux_eint4_11, 650 s3c64xx_demux_eint12_19, 651 s3c64xx_demux_eint20_27, 652 }; 653 654 static int s3c64xx_eint0_irq_map(struct irq_domain *h, unsigned int virq, 655 irq_hw_number_t hw) 656 { 657 struct s3c64xx_eint0_domain_data *ddata = h->host_data; 658 struct samsung_pin_bank *bank = ddata->bank; 659 660 if (!(bank->eint_mask & (1 << hw))) 661 return -EINVAL; 662 663 irq_set_chip_and_handler(virq, 664 &s3c64xx_eint0_irq_chip, handle_level_irq); 665 irq_set_chip_data(virq, ddata); 666 667 return 0; 668 } 669 670 /* 671 * irq domain callbacks for external wakeup interrupt controller. 672 */ 673 static const struct irq_domain_ops s3c64xx_eint0_irqd_ops = { 674 .map = s3c64xx_eint0_irq_map, 675 .xlate = irq_domain_xlate_twocell, 676 }; 677 678 /* list of external wakeup controllers supported */ 679 static const struct of_device_id s3c64xx_eint0_irq_ids[] = { 680 { .compatible = "samsung,s3c64xx-wakeup-eint", }, 681 { } 682 }; 683 684 /** 685 * s3c64xx_eint_eint0_init() - setup handling of external wakeup interrupts. 686 * @d: driver data of samsung pinctrl driver. 687 */ 688 static int s3c64xx_eint_eint0_init(struct samsung_pinctrl_drv_data *d) 689 { 690 struct device *dev = d->dev; 691 struct device_node *eint0_np = NULL; 692 struct device_node *np; 693 struct samsung_pin_bank *bank; 694 struct s3c64xx_eint0_data *data; 695 unsigned int i; 696 697 for_each_child_of_node(dev->of_node, np) { 698 if (of_match_node(s3c64xx_eint0_irq_ids, np)) { 699 eint0_np = np; 700 break; 701 } 702 } 703 if (!eint0_np) 704 return -ENODEV; 705 706 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); 707 if (!data) { 708 of_node_put(eint0_np); 709 return -ENOMEM; 710 } 711 data->drvdata = d; 712 713 for (i = 0; i < NUM_EINT0_IRQ; ++i) { 714 unsigned int irq; 715 716 irq = irq_of_parse_and_map(eint0_np, i); 717 if (!irq) { 718 dev_err(dev, "failed to get wakeup EINT IRQ %d\n", i); 719 of_node_put(eint0_np); 720 return -ENXIO; 721 } 722 723 irq_set_chained_handler_and_data(irq, 724 s3c64xx_eint0_handlers[i], 725 data); 726 } 727 of_node_put(eint0_np); 728 729 bank = d->pin_banks; 730 for (i = 0; i < d->nr_banks; ++i, ++bank) { 731 struct s3c64xx_eint0_domain_data *ddata; 732 unsigned int nr_eints; 733 unsigned int mask; 734 unsigned int irq; 735 unsigned int pin; 736 737 if (bank->eint_type != EINT_TYPE_WKUP) 738 continue; 739 740 mask = bank->eint_mask; 741 nr_eints = fls(mask); 742 743 ddata = devm_kzalloc(dev, 744 sizeof(*ddata) + nr_eints, GFP_KERNEL); 745 if (!ddata) 746 return -ENOMEM; 747 ddata->bank = bank; 748 749 bank->irq_domain = irq_domain_add_linear(bank->of_node, 750 nr_eints, &s3c64xx_eint0_irqd_ops, ddata); 751 if (!bank->irq_domain) { 752 dev_err(dev, "wkup irq domain add failed\n"); 753 return -ENXIO; 754 } 755 756 irq = bank->eint_offset; 757 mask = bank->eint_mask; 758 for (pin = 0; mask; ++pin, mask >>= 1) { 759 if (!(mask & 1)) 760 continue; 761 data->domains[irq] = bank->irq_domain; 762 data->pins[irq] = pin; 763 ddata->eints[pin] = irq; 764 ++irq; 765 } 766 } 767 768 return 0; 769 } 770 771 /* pin banks of s3c64xx pin-controller 0 */ 772 static const struct samsung_pin_bank_data s3c64xx_pin_banks0[] __initconst = { 773 PIN_BANK_4BIT_EINTG(8, 0x000, "gpa", 0), 774 PIN_BANK_4BIT_EINTG(7, 0x020, "gpb", 8), 775 PIN_BANK_4BIT_EINTG(8, 0x040, "gpc", 16), 776 PIN_BANK_4BIT_EINTG(5, 0x060, "gpd", 32), 777 PIN_BANK_4BIT(5, 0x080, "gpe"), 778 PIN_BANK_2BIT_EINTG(16, 0x0a0, "gpf", 48, 0x3fff), 779 PIN_BANK_4BIT_EINTG(7, 0x0c0, "gpg", 64), 780 PIN_BANK_4BIT2_EINTG(10, 0x0e0, "gph", 80), 781 PIN_BANK_2BIT(16, 0x100, "gpi"), 782 PIN_BANK_2BIT(12, 0x120, "gpj"), 783 PIN_BANK_4BIT2_ALIVE(16, 0x800, "gpk"), 784 PIN_BANK_4BIT2_EINTW(15, 0x810, "gpl", 16, 0x7f00), 785 PIN_BANK_4BIT_EINTW(6, 0x820, "gpm", 23, 0x1f), 786 PIN_BANK_2BIT_EINTW(16, 0x830, "gpn", 0), 787 PIN_BANK_2BIT_EINTG(16, 0x140, "gpo", 96, 0xffff), 788 PIN_BANK_2BIT_EINTG(15, 0x160, "gpp", 112, 0x7fff), 789 PIN_BANK_2BIT_EINTG(9, 0x180, "gpq", 128, 0x1ff), 790 }; 791 792 /* 793 * Samsung pinctrl driver data for S3C64xx SoC. S3C64xx SoC includes 794 * one gpio/pin-mux/pinconfig controller. 795 */ 796 static const struct samsung_pin_ctrl s3c64xx_pin_ctrl[] __initconst = { 797 { 798 /* pin-controller instance 1 data */ 799 .pin_banks = s3c64xx_pin_banks0, 800 .nr_banks = ARRAY_SIZE(s3c64xx_pin_banks0), 801 .eint_gpio_init = s3c64xx_eint_gpio_init, 802 .eint_wkup_init = s3c64xx_eint_eint0_init, 803 }, 804 }; 805 806 const struct samsung_pinctrl_of_match_data s3c64xx_of_data __initconst = { 807 .ctrl = s3c64xx_pin_ctrl, 808 .num_ctrl = ARRAY_SIZE(s3c64xx_pin_ctrl), 809 }; 810