1 /*
2  * Copyright (c) 2013, Sony Mobile Communications AB.
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 and
6  * only version 2 as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope that it will be useful,
9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11  * GNU General Public License for more details.
12  */
13 #ifndef __PINCTRL_MSM_H__
14 #define __PINCTRL_MSM_H__
15 
16 struct pinctrl_pin_desc;
17 
18 /**
19  * struct msm_function - a pinmux function
20  * @name:    Name of the pinmux function.
21  * @groups:  List of pingroups for this function.
22  * @ngroups: Number of entries in @groups.
23  */
24 struct msm_function {
25 	const char *name;
26 	const char * const *groups;
27 	unsigned ngroups;
28 };
29 
30 /**
31  * struct msm_pingroup - Qualcomm pingroup definition
32  * @name:                 Name of the pingroup.
33  * @pins:	          A list of pins assigned to this pingroup.
34  * @npins:	          Number of entries in @pins.
35  * @funcs:                A list of pinmux functions that can be selected for
36  *                        this group. The index of the selected function is used
37  *                        for programming the function selector.
38  *                        Entries should be indices into the groups list of the
39  *                        struct msm_pinctrl_soc_data.
40  * @ctl_reg:              Offset of the register holding control bits for this group.
41  * @io_reg:               Offset of the register holding input/output bits for this group.
42  * @intr_cfg_reg:         Offset of the register holding interrupt configuration bits.
43  * @intr_status_reg:      Offset of the register holding the status bits for this group.
44  * @intr_target_reg:      Offset of the register specifying routing of the interrupts
45  *                        from this group.
46  * @mux_bit:              Offset in @ctl_reg for the pinmux function selection.
47  * @pull_bit:             Offset in @ctl_reg for the bias configuration.
48  * @drv_bit:              Offset in @ctl_reg for the drive strength configuration.
49  * @oe_bit:               Offset in @ctl_reg for controlling output enable.
50  * @in_bit:               Offset in @io_reg for the input bit value.
51  * @out_bit:              Offset in @io_reg for the output bit value.
52  * @intr_enable_bit:      Offset in @intr_cfg_reg for enabling the interrupt for this group.
53  * @intr_status_bit:      Offset in @intr_status_reg for reading and acking the interrupt
54  *                        status.
55  * @intr_target_bit:      Offset in @intr_target_reg for configuring the interrupt routing.
56  * @intr_target_kpss_val: Value in @intr_target_bit for specifying that the interrupt from
57  *                        this gpio should get routed to the KPSS processor.
58  * @intr_raw_status_bit:  Offset in @intr_cfg_reg for the raw status bit.
59  * @intr_polarity_bit:    Offset in @intr_cfg_reg for specifying polarity of the interrupt.
60  * @intr_detection_bit:   Offset in @intr_cfg_reg for specifying interrupt type.
61  * @intr_detection_width: Number of bits used for specifying interrupt type,
62  *                        Should be 2 for SoCs that can detect both edges in hardware,
63  *                        otherwise 1.
64  */
65 struct msm_pingroup {
66 	const char *name;
67 	const unsigned *pins;
68 	unsigned npins;
69 
70 	unsigned *funcs;
71 	unsigned nfuncs;
72 
73 	u32 ctl_reg;
74 	u32 io_reg;
75 	u32 intr_cfg_reg;
76 	u32 intr_status_reg;
77 	u32 intr_target_reg;
78 
79 	unsigned int tile:2;
80 
81 	unsigned mux_bit:5;
82 
83 	unsigned pull_bit:5;
84 	unsigned drv_bit:5;
85 
86 	unsigned oe_bit:5;
87 	unsigned in_bit:5;
88 	unsigned out_bit:5;
89 
90 	unsigned intr_enable_bit:5;
91 	unsigned intr_status_bit:5;
92 	unsigned intr_ack_high:1;
93 
94 	unsigned intr_target_bit:5;
95 	unsigned intr_target_kpss_val:5;
96 	unsigned intr_raw_status_bit:5;
97 	unsigned intr_polarity_bit:5;
98 	unsigned intr_detection_bit:5;
99 	unsigned intr_detection_width:5;
100 };
101 
102 /**
103  * struct msm_pinctrl_soc_data - Qualcomm pin controller driver configuration
104  * @pins:	    An array describing all pins the pin controller affects.
105  * @npins:	    The number of entries in @pins.
106  * @functions:	    An array describing all mux functions the SoC supports.
107  * @nfunctions:	    The number of entries in @functions.
108  * @groups:	    An array describing all pin groups the pin SoC supports.
109  * @ngroups:	    The numbmer of entries in @groups.
110  * @ngpio:	    The number of pingroups the driver should expose as GPIOs.
111  * @pull_no_keeper: The SoC does not support keeper bias.
112  */
113 struct msm_pinctrl_soc_data {
114 	const struct pinctrl_pin_desc *pins;
115 	unsigned npins;
116 	const struct msm_function *functions;
117 	unsigned nfunctions;
118 	const struct msm_pingroup *groups;
119 	unsigned ngroups;
120 	unsigned ngpios;
121 	bool pull_no_keeper;
122 	const char *const *tiles;
123 	unsigned int ntiles;
124 };
125 
126 extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
127 
128 int msm_pinctrl_probe(struct platform_device *pdev,
129 		      const struct msm_pinctrl_soc_data *soc_data);
130 int msm_pinctrl_remove(struct platform_device *pdev);
131 
132 #endif
133