xref: /openbmc/linux/drivers/pinctrl/pinctrl-st.c (revision fadbafc1)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
4  * Authors:
5  *	Srinivas Kandagatla <srinivas.kandagatla@st.com>
6  */
7 
8 #include <linux/init.h>
9 #include <linux/module.h>
10 #include <linux/slab.h>
11 #include <linux/err.h>
12 #include <linux/io.h>
13 #include <linux/of.h>
14 #include <linux/of_irq.h>
15 #include <linux/of_address.h>
16 #include <linux/gpio/driver.h>
17 #include <linux/regmap.h>
18 #include <linux/mfd/syscon.h>
19 #include <linux/pinctrl/pinctrl.h>
20 #include <linux/pinctrl/pinmux.h>
21 #include <linux/pinctrl/pinconf.h>
22 #include <linux/platform_device.h>
23 #include "core.h"
24 
25 /* PIO Block registers */
26 /* PIO output */
27 #define REG_PIO_POUT			0x00
28 /* Set bits of POUT */
29 #define REG_PIO_SET_POUT		0x04
30 /* Clear bits of POUT */
31 #define REG_PIO_CLR_POUT		0x08
32 /* PIO input */
33 #define REG_PIO_PIN			0x10
34 /* PIO configuration */
35 #define REG_PIO_PC(n)			(0x20 + (n) * 0x10)
36 /* Set bits of PC[2:0] */
37 #define REG_PIO_SET_PC(n)		(0x24 + (n) * 0x10)
38 /* Clear bits of PC[2:0] */
39 #define REG_PIO_CLR_PC(n)		(0x28 + (n) * 0x10)
40 /* PIO input comparison */
41 #define REG_PIO_PCOMP			0x50
42 /* Set bits of PCOMP */
43 #define REG_PIO_SET_PCOMP		0x54
44 /* Clear bits of PCOMP */
45 #define REG_PIO_CLR_PCOMP		0x58
46 /* PIO input comparison mask */
47 #define REG_PIO_PMASK			0x60
48 /* Set bits of PMASK */
49 #define REG_PIO_SET_PMASK		0x64
50 /* Clear bits of PMASK */
51 #define REG_PIO_CLR_PMASK		0x68
52 
53 #define ST_GPIO_DIRECTION_BIDIR	0x1
54 #define ST_GPIO_DIRECTION_OUT	0x2
55 #define ST_GPIO_DIRECTION_IN	0x4
56 
57 /*
58  *  Packed style retime configuration.
59  *  There are two registers cfg0 and cfg1 in this style for each bank.
60  *  Each field in this register is 8 bit corresponding to 8 pins in the bank.
61  */
62 #define RT_P_CFGS_PER_BANK			2
63 #define RT_P_CFG0_CLK1NOTCLK0_FIELD(reg)	REG_FIELD(reg, 0, 7)
64 #define RT_P_CFG0_DELAY_0_FIELD(reg)		REG_FIELD(reg, 16, 23)
65 #define RT_P_CFG0_DELAY_1_FIELD(reg)		REG_FIELD(reg, 24, 31)
66 #define RT_P_CFG1_INVERTCLK_FIELD(reg)		REG_FIELD(reg, 0, 7)
67 #define RT_P_CFG1_RETIME_FIELD(reg)		REG_FIELD(reg, 8, 15)
68 #define RT_P_CFG1_CLKNOTDATA_FIELD(reg)		REG_FIELD(reg, 16, 23)
69 #define RT_P_CFG1_DOUBLE_EDGE_FIELD(reg)	REG_FIELD(reg, 24, 31)
70 
71 /*
72  * Dedicated style retime Configuration register
73  * each register is dedicated per pin.
74  */
75 #define RT_D_CFGS_PER_BANK		8
76 #define RT_D_CFG_CLK_SHIFT		0
77 #define RT_D_CFG_CLK_MASK		(0x3 << 0)
78 #define RT_D_CFG_CLKNOTDATA_SHIFT	2
79 #define RT_D_CFG_CLKNOTDATA_MASK	BIT(2)
80 #define RT_D_CFG_DELAY_SHIFT		3
81 #define RT_D_CFG_DELAY_MASK		(0xf << 3)
82 #define RT_D_CFG_DELAY_INNOTOUT_SHIFT	7
83 #define RT_D_CFG_DELAY_INNOTOUT_MASK	BIT(7)
84 #define RT_D_CFG_DOUBLE_EDGE_SHIFT	8
85 #define RT_D_CFG_DOUBLE_EDGE_MASK	BIT(8)
86 #define RT_D_CFG_INVERTCLK_SHIFT	9
87 #define RT_D_CFG_INVERTCLK_MASK		BIT(9)
88 #define RT_D_CFG_RETIME_SHIFT		10
89 #define RT_D_CFG_RETIME_MASK		BIT(10)
90 
91 /*
92  * Pinconf is represented in an opaque unsigned long variable.
93  * Below is the bit allocation details for each possible configuration.
94  * All the bit fields can be encapsulated into four variables
95  * (direction, retime-type, retime-clk, retime-delay)
96  *
97  *	 +----------------+
98  *[31:28]| reserved-3     |
99  *	 +----------------+-------------
100  *[27]   |	oe	  |		|
101  *	 +----------------+		v
102  *[26]   |	pu	  |	[Direction	]
103  *	 +----------------+		^
104  *[25]   |	od	  |		|
105  *	 +----------------+-------------
106  *[24]   | reserved-2     |
107  *	 +----------------+-------------
108  *[23]   |    retime      |		|
109  *	 +----------------+		|
110  *[22]   | retime-invclk  |		|
111  *	 +----------------+		v
112  *[21]   |retime-clknotdat|	[Retime-type	]
113  *	 +----------------+		^
114  *[20]   | retime-de      |		|
115  *	 +----------------+-------------
116  *[19:18]| retime-clk     |------>[Retime-Clk	]
117  *	 +----------------+
118  *[17:16]|  reserved-1    |
119  *	 +----------------+
120  *[15..0]| retime-delay   |------>[Retime Delay]
121  *	 +----------------+
122  */
123 
124 #define ST_PINCONF_UNPACK(conf, param)\
125 				((conf >> ST_PINCONF_ ##param ##_SHIFT) \
126 				& ST_PINCONF_ ##param ##_MASK)
127 
128 #define ST_PINCONF_PACK(conf, val, param)	(conf |=\
129 				((val & ST_PINCONF_ ##param ##_MASK) << \
130 					ST_PINCONF_ ##param ##_SHIFT))
131 
132 /* Output enable */
133 #define ST_PINCONF_OE_MASK		0x1
134 #define ST_PINCONF_OE_SHIFT		27
135 #define ST_PINCONF_OE			BIT(27)
136 #define ST_PINCONF_UNPACK_OE(conf)	ST_PINCONF_UNPACK(conf, OE)
137 #define ST_PINCONF_PACK_OE(conf)	ST_PINCONF_PACK(conf, 1, OE)
138 
139 /* Pull Up */
140 #define ST_PINCONF_PU_MASK		0x1
141 #define ST_PINCONF_PU_SHIFT		26
142 #define ST_PINCONF_PU			BIT(26)
143 #define ST_PINCONF_UNPACK_PU(conf)	ST_PINCONF_UNPACK(conf, PU)
144 #define ST_PINCONF_PACK_PU(conf)	ST_PINCONF_PACK(conf, 1, PU)
145 
146 /* Open Drain */
147 #define ST_PINCONF_OD_MASK		0x1
148 #define ST_PINCONF_OD_SHIFT		25
149 #define ST_PINCONF_OD			BIT(25)
150 #define ST_PINCONF_UNPACK_OD(conf)	ST_PINCONF_UNPACK(conf, OD)
151 #define ST_PINCONF_PACK_OD(conf)	ST_PINCONF_PACK(conf, 1, OD)
152 
153 #define ST_PINCONF_RT_MASK		0x1
154 #define ST_PINCONF_RT_SHIFT		23
155 #define ST_PINCONF_RT			BIT(23)
156 #define ST_PINCONF_UNPACK_RT(conf)	ST_PINCONF_UNPACK(conf, RT)
157 #define ST_PINCONF_PACK_RT(conf)	ST_PINCONF_PACK(conf, 1, RT)
158 
159 #define ST_PINCONF_RT_INVERTCLK_MASK	0x1
160 #define ST_PINCONF_RT_INVERTCLK_SHIFT	22
161 #define ST_PINCONF_RT_INVERTCLK		BIT(22)
162 #define ST_PINCONF_UNPACK_RT_INVERTCLK(conf) \
163 			ST_PINCONF_UNPACK(conf, RT_INVERTCLK)
164 #define ST_PINCONF_PACK_RT_INVERTCLK(conf) \
165 			ST_PINCONF_PACK(conf, 1, RT_INVERTCLK)
166 
167 #define ST_PINCONF_RT_CLKNOTDATA_MASK	0x1
168 #define ST_PINCONF_RT_CLKNOTDATA_SHIFT	21
169 #define ST_PINCONF_RT_CLKNOTDATA	BIT(21)
170 #define ST_PINCONF_UNPACK_RT_CLKNOTDATA(conf)	\
171 				ST_PINCONF_UNPACK(conf, RT_CLKNOTDATA)
172 #define ST_PINCONF_PACK_RT_CLKNOTDATA(conf) \
173 				ST_PINCONF_PACK(conf, 1, RT_CLKNOTDATA)
174 
175 #define ST_PINCONF_RT_DOUBLE_EDGE_MASK	0x1
176 #define ST_PINCONF_RT_DOUBLE_EDGE_SHIFT	20
177 #define ST_PINCONF_RT_DOUBLE_EDGE	BIT(20)
178 #define ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(conf) \
179 				ST_PINCONF_UNPACK(conf, RT_DOUBLE_EDGE)
180 #define ST_PINCONF_PACK_RT_DOUBLE_EDGE(conf) \
181 				ST_PINCONF_PACK(conf, 1, RT_DOUBLE_EDGE)
182 
183 #define ST_PINCONF_RT_CLK_MASK		0x3
184 #define ST_PINCONF_RT_CLK_SHIFT		18
185 #define ST_PINCONF_RT_CLK		BIT(18)
186 #define ST_PINCONF_UNPACK_RT_CLK(conf)	ST_PINCONF_UNPACK(conf, RT_CLK)
187 #define ST_PINCONF_PACK_RT_CLK(conf, val) ST_PINCONF_PACK(conf, val, RT_CLK)
188 
189 /* RETIME_DELAY in Pico Secs */
190 #define ST_PINCONF_RT_DELAY_MASK	0xffff
191 #define ST_PINCONF_RT_DELAY_SHIFT	0
192 #define ST_PINCONF_UNPACK_RT_DELAY(conf) ST_PINCONF_UNPACK(conf, RT_DELAY)
193 #define ST_PINCONF_PACK_RT_DELAY(conf, val) \
194 				ST_PINCONF_PACK(conf, val, RT_DELAY)
195 
196 #define ST_GPIO_PINS_PER_BANK	(8)
197 #define OF_GPIO_ARGS_MIN	(4)
198 #define OF_RT_ARGS_MIN		(2)
199 
200 #define gpio_range_to_bank(chip) \
201 		container_of(chip, struct st_gpio_bank, range)
202 
203 #define pc_to_bank(pc) \
204 		container_of(pc, struct st_gpio_bank, pc)
205 
206 enum st_retime_style {
207 	st_retime_style_none,
208 	st_retime_style_packed,
209 	st_retime_style_dedicated,
210 };
211 
212 struct st_retime_dedicated {
213 	struct regmap_field *rt[ST_GPIO_PINS_PER_BANK];
214 };
215 
216 struct st_retime_packed {
217 	struct regmap_field *clk1notclk0;
218 	struct regmap_field *delay_0;
219 	struct regmap_field *delay_1;
220 	struct regmap_field *invertclk;
221 	struct regmap_field *retime;
222 	struct regmap_field *clknotdata;
223 	struct regmap_field *double_edge;
224 };
225 
226 struct st_pio_control {
227 	u32 rt_pin_mask;
228 	struct regmap_field *alt, *oe, *pu, *od;
229 	/* retiming */
230 	union {
231 		struct st_retime_packed		rt_p;
232 		struct st_retime_dedicated	rt_d;
233 	} rt;
234 };
235 
236 struct st_pctl_data {
237 	const enum st_retime_style	rt_style;
238 	const unsigned int		*input_delays;
239 	const int			ninput_delays;
240 	const unsigned int		*output_delays;
241 	const int			noutput_delays;
242 	/* register offset information */
243 	const int alt, oe, pu, od, rt;
244 };
245 
246 struct st_pinconf {
247 	int		pin;
248 	const char	*name;
249 	unsigned long	config;
250 	int		altfunc;
251 };
252 
253 struct st_pmx_func {
254 	const char	*name;
255 	const char	**groups;
256 	unsigned	ngroups;
257 };
258 
259 struct st_pctl_group {
260 	const char		*name;
261 	unsigned int		*pins;
262 	unsigned		npins;
263 	struct st_pinconf	*pin_conf;
264 };
265 
266 /*
267  * Edge triggers are not supported at hardware level, it is supported by
268  * software by exploiting the level trigger support in hardware.
269  * Software uses a virtual register (EDGE_CONF) for edge trigger configuration
270  * of each gpio pin in a GPIO bank.
271  *
272  * Each bank has a 32 bit EDGE_CONF register which is divided in to 8 parts of
273  * 4-bits. Each 4-bit space is allocated for each pin in a gpio bank.
274  *
275  * bit allocation per pin is:
276  * Bits:  [0 - 3] | [4 - 7]  [8 - 11] ... ... ... ...  [ 28 - 31]
277  *       --------------------------------------------------------
278  *       |  pin-0  |  pin-2 | pin-3  | ... ... ... ... | pin -7 |
279  *       --------------------------------------------------------
280  *
281  *  A pin can have one of following the values in its edge configuration field.
282  *
283  *	-------   ----------------------------
284  *	[0-3]	- Description
285  *	-------   ----------------------------
286  *	0000	- No edge IRQ.
287  *	0001	- Falling edge IRQ.
288  *	0010	- Rising edge IRQ.
289  *	0011	- Rising and Falling edge IRQ.
290  *	-------   ----------------------------
291  */
292 
293 #define ST_IRQ_EDGE_CONF_BITS_PER_PIN	4
294 #define ST_IRQ_EDGE_MASK		0xf
295 #define ST_IRQ_EDGE_FALLING		BIT(0)
296 #define ST_IRQ_EDGE_RISING		BIT(1)
297 #define ST_IRQ_EDGE_BOTH		(BIT(0) | BIT(1))
298 
299 #define ST_IRQ_RISING_EDGE_CONF(pin) \
300 	(ST_IRQ_EDGE_RISING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
301 
302 #define ST_IRQ_FALLING_EDGE_CONF(pin) \
303 	(ST_IRQ_EDGE_FALLING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
304 
305 #define ST_IRQ_BOTH_EDGE_CONF(pin) \
306 	(ST_IRQ_EDGE_BOTH << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
307 
308 #define ST_IRQ_EDGE_CONF(conf, pin) \
309 	(conf >> (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN) & ST_IRQ_EDGE_MASK)
310 
311 struct st_gpio_bank {
312 	struct gpio_chip		gpio_chip;
313 	struct pinctrl_gpio_range	range;
314 	void __iomem			*base;
315 	struct st_pio_control		pc;
316 	unsigned long			irq_edge_conf;
317 	spinlock_t                      lock;
318 };
319 
320 struct st_pinctrl {
321 	struct device			*dev;
322 	struct pinctrl_dev		*pctl;
323 	struct st_gpio_bank		*banks;
324 	int				nbanks;
325 	struct st_pmx_func		*functions;
326 	int				nfunctions;
327 	struct st_pctl_group		*groups;
328 	int				ngroups;
329 	struct regmap			*regmap;
330 	const struct st_pctl_data	*data;
331 	void __iomem			*irqmux_base;
332 };
333 
334 /* SOC specific data */
335 
336 static const unsigned int stih407_delays[] = {0, 300, 500, 750, 1000, 1250,
337 			1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250 };
338 
339 static const struct st_pctl_data  stih407_data = {
340 	.rt_style       = st_retime_style_dedicated,
341 	.input_delays   = stih407_delays,
342 	.ninput_delays  = ARRAY_SIZE(stih407_delays),
343 	.output_delays  = stih407_delays,
344 	.noutput_delays = ARRAY_SIZE(stih407_delays),
345 	.alt = 0, .oe = 40, .pu = 50, .od = 60, .rt = 100,
346 };
347 
348 static const struct st_pctl_data stih407_flashdata = {
349 	.rt_style	= st_retime_style_none,
350 	.input_delays	= stih407_delays,
351 	.ninput_delays	= ARRAY_SIZE(stih407_delays),
352 	.output_delays	= stih407_delays,
353 	.noutput_delays = ARRAY_SIZE(stih407_delays),
354 	.alt = 0,
355 	.oe = -1, /* Not Available */
356 	.pu = -1, /* Not Available */
357 	.od = 60,
358 	.rt = 100,
359 };
360 
361 static struct st_pio_control *st_get_pio_control(
362 			struct pinctrl_dev *pctldev, int pin)
363 {
364 	struct pinctrl_gpio_range *range =
365 			 pinctrl_find_gpio_range_from_pin(pctldev, pin);
366 	struct st_gpio_bank *bank = gpio_range_to_bank(range);
367 
368 	return &bank->pc;
369 }
370 
371 /* Low level functions.. */
372 static inline int st_gpio_bank(int gpio)
373 {
374 	return gpio/ST_GPIO_PINS_PER_BANK;
375 }
376 
377 static inline int st_gpio_pin(int gpio)
378 {
379 	return gpio%ST_GPIO_PINS_PER_BANK;
380 }
381 
382 static void st_pinconf_set_config(struct st_pio_control *pc,
383 				int pin, unsigned long config)
384 {
385 	struct regmap_field *output_enable = pc->oe;
386 	struct regmap_field *pull_up = pc->pu;
387 	struct regmap_field *open_drain = pc->od;
388 	unsigned int oe_value, pu_value, od_value;
389 	unsigned long mask = BIT(pin);
390 
391 	if (output_enable) {
392 		regmap_field_read(output_enable, &oe_value);
393 		oe_value &= ~mask;
394 		if (config & ST_PINCONF_OE)
395 			oe_value |= mask;
396 		regmap_field_write(output_enable, oe_value);
397 	}
398 
399 	if (pull_up) {
400 		regmap_field_read(pull_up, &pu_value);
401 		pu_value &= ~mask;
402 		if (config & ST_PINCONF_PU)
403 			pu_value |= mask;
404 		regmap_field_write(pull_up, pu_value);
405 	}
406 
407 	if (open_drain) {
408 		regmap_field_read(open_drain, &od_value);
409 		od_value &= ~mask;
410 		if (config & ST_PINCONF_OD)
411 			od_value |= mask;
412 		regmap_field_write(open_drain, od_value);
413 	}
414 }
415 
416 static void st_pctl_set_function(struct st_pio_control *pc,
417 				int pin_id, int function)
418 {
419 	struct regmap_field *alt = pc->alt;
420 	unsigned int val;
421 	int pin = st_gpio_pin(pin_id);
422 	int offset = pin * 4;
423 
424 	if (!alt)
425 		return;
426 
427 	regmap_field_read(alt, &val);
428 	val &= ~(0xf << offset);
429 	val |= function << offset;
430 	regmap_field_write(alt, val);
431 }
432 
433 static unsigned int st_pctl_get_pin_function(struct st_pio_control *pc, int pin)
434 {
435 	struct regmap_field *alt = pc->alt;
436 	unsigned int val;
437 	int offset = pin * 4;
438 
439 	if (!alt)
440 		return 0;
441 
442 	regmap_field_read(alt, &val);
443 
444 	return (val >> offset) & 0xf;
445 }
446 
447 static unsigned long st_pinconf_delay_to_bit(unsigned int delay,
448 	const struct st_pctl_data *data, unsigned long config)
449 {
450 	const unsigned int *delay_times;
451 	int num_delay_times, i, closest_index = -1;
452 	unsigned int closest_divergence = UINT_MAX;
453 
454 	if (ST_PINCONF_UNPACK_OE(config)) {
455 		delay_times = data->output_delays;
456 		num_delay_times = data->noutput_delays;
457 	} else {
458 		delay_times = data->input_delays;
459 		num_delay_times = data->ninput_delays;
460 	}
461 
462 	for (i = 0; i < num_delay_times; i++) {
463 		unsigned int divergence = abs(delay - delay_times[i]);
464 
465 		if (divergence == 0)
466 			return i;
467 
468 		if (divergence < closest_divergence) {
469 			closest_divergence = divergence;
470 			closest_index = i;
471 		}
472 	}
473 
474 	pr_warn("Attempt to set delay %d, closest available %d\n",
475 	     delay, delay_times[closest_index]);
476 
477 	return closest_index;
478 }
479 
480 static unsigned long st_pinconf_bit_to_delay(unsigned int index,
481 	const struct st_pctl_data *data, unsigned long output)
482 {
483 	const unsigned int *delay_times;
484 	int num_delay_times;
485 
486 	if (output) {
487 		delay_times = data->output_delays;
488 		num_delay_times = data->noutput_delays;
489 	} else {
490 		delay_times = data->input_delays;
491 		num_delay_times = data->ninput_delays;
492 	}
493 
494 	if (index < num_delay_times) {
495 		return delay_times[index];
496 	} else {
497 		pr_warn("Delay not found in/out delay list\n");
498 		return 0;
499 	}
500 }
501 
502 static void st_regmap_field_bit_set_clear_pin(struct regmap_field *field,
503 	int enable, int pin)
504 {
505 	unsigned int val = 0;
506 
507 	regmap_field_read(field, &val);
508 	if (enable)
509 		val |= BIT(pin);
510 	else
511 		val &= ~BIT(pin);
512 	regmap_field_write(field, val);
513 }
514 
515 static void st_pinconf_set_retime_packed(struct st_pinctrl *info,
516 	struct st_pio_control *pc,	unsigned long config, int pin)
517 {
518 	const struct st_pctl_data *data = info->data;
519 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
520 	unsigned int delay;
521 
522 	st_regmap_field_bit_set_clear_pin(rt_p->clk1notclk0,
523 				ST_PINCONF_UNPACK_RT_CLK(config), pin);
524 
525 	st_regmap_field_bit_set_clear_pin(rt_p->clknotdata,
526 				ST_PINCONF_UNPACK_RT_CLKNOTDATA(config), pin);
527 
528 	st_regmap_field_bit_set_clear_pin(rt_p->double_edge,
529 				ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config), pin);
530 
531 	st_regmap_field_bit_set_clear_pin(rt_p->invertclk,
532 				ST_PINCONF_UNPACK_RT_INVERTCLK(config), pin);
533 
534 	st_regmap_field_bit_set_clear_pin(rt_p->retime,
535 				ST_PINCONF_UNPACK_RT(config), pin);
536 
537 	delay = st_pinconf_delay_to_bit(ST_PINCONF_UNPACK_RT_DELAY(config),
538 					data, config);
539 	/* 2 bit delay, lsb */
540 	st_regmap_field_bit_set_clear_pin(rt_p->delay_0, delay & 0x1, pin);
541 	/* 2 bit delay, msb */
542 	st_regmap_field_bit_set_clear_pin(rt_p->delay_1, delay & 0x2, pin);
543 }
544 
545 static void st_pinconf_set_retime_dedicated(struct st_pinctrl *info,
546 	struct st_pio_control *pc, unsigned long config, int pin)
547 {
548 	int input	= ST_PINCONF_UNPACK_OE(config) ? 0 : 1;
549 	int clk		= ST_PINCONF_UNPACK_RT_CLK(config);
550 	int clknotdata	= ST_PINCONF_UNPACK_RT_CLKNOTDATA(config);
551 	int double_edge	= ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config);
552 	int invertclk	= ST_PINCONF_UNPACK_RT_INVERTCLK(config);
553 	int retime	= ST_PINCONF_UNPACK_RT(config);
554 
555 	unsigned long delay = st_pinconf_delay_to_bit(
556 			ST_PINCONF_UNPACK_RT_DELAY(config),
557 			info->data, config);
558 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
559 
560 	unsigned long retime_config =
561 		((clk) << RT_D_CFG_CLK_SHIFT) |
562 		((delay) << RT_D_CFG_DELAY_SHIFT) |
563 		((input) << RT_D_CFG_DELAY_INNOTOUT_SHIFT) |
564 		((retime) << RT_D_CFG_RETIME_SHIFT) |
565 		((clknotdata) << RT_D_CFG_CLKNOTDATA_SHIFT) |
566 		((invertclk) << RT_D_CFG_INVERTCLK_SHIFT) |
567 		((double_edge) << RT_D_CFG_DOUBLE_EDGE_SHIFT);
568 
569 	regmap_field_write(rt_d->rt[pin], retime_config);
570 }
571 
572 static void st_pinconf_get_direction(struct st_pio_control *pc,
573 	int pin, unsigned long *config)
574 {
575 	unsigned int oe_value, pu_value, od_value;
576 
577 	if (pc->oe) {
578 		regmap_field_read(pc->oe, &oe_value);
579 		if (oe_value & BIT(pin))
580 			ST_PINCONF_PACK_OE(*config);
581 	}
582 
583 	if (pc->pu) {
584 		regmap_field_read(pc->pu, &pu_value);
585 		if (pu_value & BIT(pin))
586 			ST_PINCONF_PACK_PU(*config);
587 	}
588 
589 	if (pc->od) {
590 		regmap_field_read(pc->od, &od_value);
591 		if (od_value & BIT(pin))
592 			ST_PINCONF_PACK_OD(*config);
593 	}
594 }
595 
596 static int st_pinconf_get_retime_packed(struct st_pinctrl *info,
597 	struct st_pio_control *pc,	int pin, unsigned long *config)
598 {
599 	const struct st_pctl_data *data = info->data;
600 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
601 	unsigned int delay_bits, delay, delay0, delay1, val;
602 	int output = ST_PINCONF_UNPACK_OE(*config);
603 
604 	if (!regmap_field_read(rt_p->retime, &val) && (val & BIT(pin)))
605 		ST_PINCONF_PACK_RT(*config);
606 
607 	if (!regmap_field_read(rt_p->clk1notclk0, &val) && (val & BIT(pin)))
608 		ST_PINCONF_PACK_RT_CLK(*config, 1);
609 
610 	if (!regmap_field_read(rt_p->clknotdata, &val) && (val & BIT(pin)))
611 		ST_PINCONF_PACK_RT_CLKNOTDATA(*config);
612 
613 	if (!regmap_field_read(rt_p->double_edge, &val) && (val & BIT(pin)))
614 		ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config);
615 
616 	if (!regmap_field_read(rt_p->invertclk, &val) && (val & BIT(pin)))
617 		ST_PINCONF_PACK_RT_INVERTCLK(*config);
618 
619 	regmap_field_read(rt_p->delay_0, &delay0);
620 	regmap_field_read(rt_p->delay_1, &delay1);
621 	delay_bits = (((delay1 & BIT(pin)) ? 1 : 0) << 1) |
622 			(((delay0 & BIT(pin)) ? 1 : 0));
623 	delay =  st_pinconf_bit_to_delay(delay_bits, data, output);
624 	ST_PINCONF_PACK_RT_DELAY(*config, delay);
625 
626 	return 0;
627 }
628 
629 static int st_pinconf_get_retime_dedicated(struct st_pinctrl *info,
630 	struct st_pio_control *pc,	int pin, unsigned long *config)
631 {
632 	unsigned int value;
633 	unsigned long delay_bits, delay, rt_clk;
634 	int output = ST_PINCONF_UNPACK_OE(*config);
635 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
636 
637 	regmap_field_read(rt_d->rt[pin], &value);
638 
639 	rt_clk = (value & RT_D_CFG_CLK_MASK) >> RT_D_CFG_CLK_SHIFT;
640 	ST_PINCONF_PACK_RT_CLK(*config, rt_clk);
641 
642 	delay_bits = (value & RT_D_CFG_DELAY_MASK) >> RT_D_CFG_DELAY_SHIFT;
643 	delay =  st_pinconf_bit_to_delay(delay_bits, info->data, output);
644 	ST_PINCONF_PACK_RT_DELAY(*config, delay);
645 
646 	if (value & RT_D_CFG_CLKNOTDATA_MASK)
647 		ST_PINCONF_PACK_RT_CLKNOTDATA(*config);
648 
649 	if (value & RT_D_CFG_DOUBLE_EDGE_MASK)
650 		ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config);
651 
652 	if (value & RT_D_CFG_INVERTCLK_MASK)
653 		ST_PINCONF_PACK_RT_INVERTCLK(*config);
654 
655 	if (value & RT_D_CFG_RETIME_MASK)
656 		ST_PINCONF_PACK_RT(*config);
657 
658 	return 0;
659 }
660 
661 /* GPIO related functions */
662 
663 static inline void __st_gpio_set(struct st_gpio_bank *bank,
664 	unsigned offset, int value)
665 {
666 	if (value)
667 		writel(BIT(offset), bank->base + REG_PIO_SET_POUT);
668 	else
669 		writel(BIT(offset), bank->base + REG_PIO_CLR_POUT);
670 }
671 
672 static void st_gpio_direction(struct st_gpio_bank *bank,
673 		unsigned int gpio, unsigned int direction)
674 {
675 	int offset = st_gpio_pin(gpio);
676 	int i = 0;
677 	/**
678 	 * There are three configuration registers (PIOn_PC0, PIOn_PC1
679 	 * and PIOn_PC2) for each port. These are used to configure the
680 	 * PIO port pins. Each pin can be configured as an input, output,
681 	 * bidirectional, or alternative function pin. Three bits, one bit
682 	 * from each of the three registers, configure the corresponding bit of
683 	 * the port. Valid bit settings is:
684 	 *
685 	 * PC2		PC1		PC0	Direction.
686 	 * 0		0		0	[Input Weak pull-up]
687 	 * 0		0 or 1		1	[Bidirection]
688 	 * 0		1		0	[Output]
689 	 * 1		0		0	[Input]
690 	 *
691 	 * PIOn_SET_PC and PIOn_CLR_PC registers are used to set and clear bits
692 	 * individually.
693 	 */
694 	for (i = 0; i <= 2; i++) {
695 		if (direction & BIT(i))
696 			writel(BIT(offset), bank->base + REG_PIO_SET_PC(i));
697 		else
698 			writel(BIT(offset), bank->base + REG_PIO_CLR_PC(i));
699 	}
700 }
701 
702 static int st_gpio_get(struct gpio_chip *chip, unsigned offset)
703 {
704 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
705 
706 	return !!(readl(bank->base + REG_PIO_PIN) & BIT(offset));
707 }
708 
709 static void st_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
710 {
711 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
712 	__st_gpio_set(bank, offset, value);
713 }
714 
715 static int st_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
716 {
717 	pinctrl_gpio_direction_input(chip->base + offset);
718 
719 	return 0;
720 }
721 
722 static int st_gpio_direction_output(struct gpio_chip *chip,
723 	unsigned offset, int value)
724 {
725 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
726 
727 	__st_gpio_set(bank, offset, value);
728 	pinctrl_gpio_direction_output(chip->base + offset);
729 
730 	return 0;
731 }
732 
733 static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
734 {
735 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
736 	struct st_pio_control pc = bank->pc;
737 	unsigned long config;
738 	unsigned int direction = 0;
739 	unsigned int function;
740 	unsigned int value;
741 	int i = 0;
742 
743 	/* Alternate function direction is handled by Pinctrl */
744 	function = st_pctl_get_pin_function(&pc, offset);
745 	if (function) {
746 		st_pinconf_get_direction(&pc, offset, &config);
747 		if (ST_PINCONF_UNPACK_OE(config))
748 			return GPIO_LINE_DIRECTION_OUT;
749 
750 		return GPIO_LINE_DIRECTION_IN;
751 	}
752 
753 	/*
754 	 * GPIO direction is handled differently
755 	 * - See st_gpio_direction() above for an explanation
756 	 */
757 	for (i = 0; i <= 2; i++) {
758 		value = readl(bank->base + REG_PIO_PC(i));
759 		direction |= ((value >> offset) & 0x1) << i;
760 	}
761 
762 	if (direction == ST_GPIO_DIRECTION_IN)
763 		return GPIO_LINE_DIRECTION_IN;
764 
765 	return GPIO_LINE_DIRECTION_OUT;
766 }
767 
768 /* Pinctrl Groups */
769 static int st_pctl_get_groups_count(struct pinctrl_dev *pctldev)
770 {
771 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
772 
773 	return info->ngroups;
774 }
775 
776 static const char *st_pctl_get_group_name(struct pinctrl_dev *pctldev,
777 				       unsigned selector)
778 {
779 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
780 
781 	return info->groups[selector].name;
782 }
783 
784 static int st_pctl_get_group_pins(struct pinctrl_dev *pctldev,
785 	unsigned selector, const unsigned **pins, unsigned *npins)
786 {
787 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
788 
789 	if (selector >= info->ngroups)
790 		return -EINVAL;
791 
792 	*pins = info->groups[selector].pins;
793 	*npins = info->groups[selector].npins;
794 
795 	return 0;
796 }
797 
798 static inline const struct st_pctl_group *st_pctl_find_group_by_name(
799 	const struct st_pinctrl *info, const char *name)
800 {
801 	int i;
802 
803 	for (i = 0; i < info->ngroups; i++) {
804 		if (!strcmp(info->groups[i].name, name))
805 			return &info->groups[i];
806 	}
807 
808 	return NULL;
809 }
810 
811 static int st_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
812 	struct device_node *np, struct pinctrl_map **map, unsigned *num_maps)
813 {
814 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
815 	const struct st_pctl_group *grp;
816 	struct device *dev = info->dev;
817 	struct pinctrl_map *new_map;
818 	struct device_node *parent;
819 	int map_num, i;
820 
821 	grp = st_pctl_find_group_by_name(info, np->name);
822 	if (!grp) {
823 		dev_err(dev, "unable to find group for node %pOFn\n", np);
824 		return -EINVAL;
825 	}
826 
827 	map_num = grp->npins + 1;
828 	new_map = devm_kcalloc(dev, map_num, sizeof(*new_map), GFP_KERNEL);
829 	if (!new_map)
830 		return -ENOMEM;
831 
832 	parent = of_get_parent(np);
833 	if (!parent) {
834 		devm_kfree(dev, new_map);
835 		return -EINVAL;
836 	}
837 
838 	*map = new_map;
839 	*num_maps = map_num;
840 	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
841 	new_map[0].data.mux.function = parent->name;
842 	new_map[0].data.mux.group = np->name;
843 	of_node_put(parent);
844 
845 	/* create config map per pin */
846 	new_map++;
847 	for (i = 0; i < grp->npins; i++) {
848 		new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
849 		new_map[i].data.configs.group_or_pin =
850 				pin_get_name(pctldev, grp->pins[i]);
851 		new_map[i].data.configs.configs = &grp->pin_conf[i].config;
852 		new_map[i].data.configs.num_configs = 1;
853 	}
854 	dev_info(dev, "maps: function %s group %s num %d\n",
855 		(*map)->data.mux.function, grp->name, map_num);
856 
857 	return 0;
858 }
859 
860 static void st_pctl_dt_free_map(struct pinctrl_dev *pctldev,
861 			struct pinctrl_map *map, unsigned num_maps)
862 {
863 }
864 
865 static const struct pinctrl_ops st_pctlops = {
866 	.get_groups_count	= st_pctl_get_groups_count,
867 	.get_group_pins		= st_pctl_get_group_pins,
868 	.get_group_name		= st_pctl_get_group_name,
869 	.dt_node_to_map		= st_pctl_dt_node_to_map,
870 	.dt_free_map		= st_pctl_dt_free_map,
871 };
872 
873 /* Pinmux */
874 static int st_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
875 {
876 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
877 
878 	return info->nfunctions;
879 }
880 
881 static const char *st_pmx_get_fname(struct pinctrl_dev *pctldev,
882 	unsigned selector)
883 {
884 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
885 
886 	return info->functions[selector].name;
887 }
888 
889 static int st_pmx_get_groups(struct pinctrl_dev *pctldev,
890 	unsigned selector, const char * const **grps, unsigned * const ngrps)
891 {
892 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
893 	*grps = info->functions[selector].groups;
894 	*ngrps = info->functions[selector].ngroups;
895 
896 	return 0;
897 }
898 
899 static int st_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned fselector,
900 			unsigned group)
901 {
902 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
903 	struct st_pinconf *conf = info->groups[group].pin_conf;
904 	struct st_pio_control *pc;
905 	int i;
906 
907 	for (i = 0; i < info->groups[group].npins; i++) {
908 		pc = st_get_pio_control(pctldev, conf[i].pin);
909 		st_pctl_set_function(pc, conf[i].pin, conf[i].altfunc);
910 	}
911 
912 	return 0;
913 }
914 
915 static int st_pmx_set_gpio_direction(struct pinctrl_dev *pctldev,
916 			struct pinctrl_gpio_range *range, unsigned gpio,
917 			bool input)
918 {
919 	struct st_gpio_bank *bank = gpio_range_to_bank(range);
920 	/*
921 	 * When a PIO bank is used in its primary function mode (altfunc = 0)
922 	 * Output Enable (OE), Open Drain(OD), and Pull Up (PU)
923 	 * for the primary PIO functions are driven by the related PIO block
924 	 */
925 	st_pctl_set_function(&bank->pc, gpio, 0);
926 	st_gpio_direction(bank, gpio, input ?
927 		ST_GPIO_DIRECTION_IN : ST_GPIO_DIRECTION_OUT);
928 
929 	return 0;
930 }
931 
932 static const struct pinmux_ops st_pmxops = {
933 	.get_functions_count	= st_pmx_get_funcs_count,
934 	.get_function_name	= st_pmx_get_fname,
935 	.get_function_groups	= st_pmx_get_groups,
936 	.set_mux		= st_pmx_set_mux,
937 	.gpio_set_direction	= st_pmx_set_gpio_direction,
938 	.strict			= true,
939 };
940 
941 /* Pinconf  */
942 static void st_pinconf_get_retime(struct st_pinctrl *info,
943 	struct st_pio_control *pc, int pin, unsigned long *config)
944 {
945 	if (info->data->rt_style == st_retime_style_packed)
946 		st_pinconf_get_retime_packed(info, pc, pin, config);
947 	else if (info->data->rt_style == st_retime_style_dedicated)
948 		if ((BIT(pin) & pc->rt_pin_mask))
949 			st_pinconf_get_retime_dedicated(info, pc,
950 					pin, config);
951 }
952 
953 static void st_pinconf_set_retime(struct st_pinctrl *info,
954 	struct st_pio_control *pc, int pin, unsigned long config)
955 {
956 	if (info->data->rt_style == st_retime_style_packed)
957 		st_pinconf_set_retime_packed(info, pc, config, pin);
958 	else if (info->data->rt_style == st_retime_style_dedicated)
959 		if ((BIT(pin) & pc->rt_pin_mask))
960 			st_pinconf_set_retime_dedicated(info, pc,
961 							config, pin);
962 }
963 
964 static int st_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin_id,
965 			unsigned long *configs, unsigned num_configs)
966 {
967 	int pin = st_gpio_pin(pin_id);
968 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
969 	struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id);
970 	int i;
971 
972 	for (i = 0; i < num_configs; i++) {
973 		st_pinconf_set_config(pc, pin, configs[i]);
974 		st_pinconf_set_retime(info, pc, pin, configs[i]);
975 	} /* for each config */
976 
977 	return 0;
978 }
979 
980 static int st_pinconf_get(struct pinctrl_dev *pctldev,
981 			     unsigned pin_id, unsigned long *config)
982 {
983 	int pin = st_gpio_pin(pin_id);
984 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
985 	struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id);
986 
987 	*config = 0;
988 	st_pinconf_get_direction(pc, pin, config);
989 	st_pinconf_get_retime(info, pc, pin, config);
990 
991 	return 0;
992 }
993 
994 static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
995 				   struct seq_file *s, unsigned pin_id)
996 {
997 	struct st_pio_control *pc;
998 	unsigned long config;
999 	unsigned int function;
1000 	int offset = st_gpio_pin(pin_id);
1001 	char f[16];
1002 	int oe;
1003 
1004 	mutex_unlock(&pctldev->mutex);
1005 	pc = st_get_pio_control(pctldev, pin_id);
1006 	st_pinconf_get(pctldev, pin_id, &config);
1007 	mutex_lock(&pctldev->mutex);
1008 
1009 	function = st_pctl_get_pin_function(pc, offset);
1010 	if (function)
1011 		snprintf(f, 10, "Alt Fn %u", function);
1012 	else
1013 		snprintf(f, 5, "GPIO");
1014 
1015 	oe = st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset);
1016 	seq_printf(s, "[OE:%d,PU:%ld,OD:%ld]\t%s\n"
1017 		"\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
1018 		"de:%ld,rt-clk:%ld,rt-delay:%ld]",
1019 		(oe == GPIO_LINE_DIRECTION_OUT),
1020 		ST_PINCONF_UNPACK_PU(config),
1021 		ST_PINCONF_UNPACK_OD(config),
1022 		f,
1023 		ST_PINCONF_UNPACK_RT(config),
1024 		ST_PINCONF_UNPACK_RT_INVERTCLK(config),
1025 		ST_PINCONF_UNPACK_RT_CLKNOTDATA(config),
1026 		ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config),
1027 		ST_PINCONF_UNPACK_RT_CLK(config),
1028 		ST_PINCONF_UNPACK_RT_DELAY(config));
1029 }
1030 
1031 static const struct pinconf_ops st_confops = {
1032 	.pin_config_get		= st_pinconf_get,
1033 	.pin_config_set		= st_pinconf_set,
1034 	.pin_config_dbg_show	= st_pinconf_dbg_show,
1035 };
1036 
1037 static void st_pctl_dt_child_count(struct st_pinctrl *info,
1038 				     struct device_node *np)
1039 {
1040 	struct device_node *child;
1041 	for_each_child_of_node(np, child) {
1042 		if (of_property_read_bool(child, "gpio-controller")) {
1043 			info->nbanks++;
1044 		} else {
1045 			info->nfunctions++;
1046 			info->ngroups += of_get_child_count(child);
1047 		}
1048 	}
1049 }
1050 
1051 static int st_pctl_dt_setup_retime_packed(struct st_pinctrl *info,
1052 	int bank, struct st_pio_control *pc)
1053 {
1054 	struct device *dev = info->dev;
1055 	struct regmap *rm = info->regmap;
1056 	const struct st_pctl_data *data = info->data;
1057 	/* 2 registers per bank */
1058 	int reg = (data->rt + bank * RT_P_CFGS_PER_BANK) * 4;
1059 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
1060 	/* cfg0 */
1061 	struct reg_field clk1notclk0 = RT_P_CFG0_CLK1NOTCLK0_FIELD(reg);
1062 	struct reg_field delay_0 = RT_P_CFG0_DELAY_0_FIELD(reg);
1063 	struct reg_field delay_1 = RT_P_CFG0_DELAY_1_FIELD(reg);
1064 	/* cfg1 */
1065 	struct reg_field invertclk = RT_P_CFG1_INVERTCLK_FIELD(reg + 4);
1066 	struct reg_field retime = RT_P_CFG1_RETIME_FIELD(reg + 4);
1067 	struct reg_field clknotdata = RT_P_CFG1_CLKNOTDATA_FIELD(reg + 4);
1068 	struct reg_field double_edge = RT_P_CFG1_DOUBLE_EDGE_FIELD(reg + 4);
1069 
1070 	rt_p->clk1notclk0 = devm_regmap_field_alloc(dev, rm, clk1notclk0);
1071 	rt_p->delay_0	= devm_regmap_field_alloc(dev, rm, delay_0);
1072 	rt_p->delay_1 = devm_regmap_field_alloc(dev, rm, delay_1);
1073 	rt_p->invertclk = devm_regmap_field_alloc(dev, rm, invertclk);
1074 	rt_p->retime = devm_regmap_field_alloc(dev, rm, retime);
1075 	rt_p->clknotdata = devm_regmap_field_alloc(dev, rm, clknotdata);
1076 	rt_p->double_edge = devm_regmap_field_alloc(dev, rm, double_edge);
1077 
1078 	if (IS_ERR(rt_p->clk1notclk0) || IS_ERR(rt_p->delay_0) ||
1079 		 IS_ERR(rt_p->delay_1) || IS_ERR(rt_p->invertclk) ||
1080 		 IS_ERR(rt_p->retime) || IS_ERR(rt_p->clknotdata) ||
1081 		 IS_ERR(rt_p->double_edge))
1082 		return -EINVAL;
1083 
1084 	return 0;
1085 }
1086 
1087 static int st_pctl_dt_setup_retime_dedicated(struct st_pinctrl *info,
1088 	int bank, struct st_pio_control *pc)
1089 {
1090 	struct device *dev = info->dev;
1091 	struct regmap *rm = info->regmap;
1092 	const struct st_pctl_data *data = info->data;
1093 	/* 8 registers per bank */
1094 	int reg_offset = (data->rt + bank * RT_D_CFGS_PER_BANK) * 4;
1095 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
1096 	unsigned int j;
1097 	u32 pin_mask = pc->rt_pin_mask;
1098 
1099 	for (j = 0; j < RT_D_CFGS_PER_BANK; j++) {
1100 		if (BIT(j) & pin_mask) {
1101 			struct reg_field reg = REG_FIELD(reg_offset, 0, 31);
1102 			rt_d->rt[j] = devm_regmap_field_alloc(dev, rm, reg);
1103 			if (IS_ERR(rt_d->rt[j]))
1104 				return -EINVAL;
1105 			reg_offset += 4;
1106 		}
1107 	}
1108 	return 0;
1109 }
1110 
1111 static int st_pctl_dt_setup_retime(struct st_pinctrl *info,
1112 	int bank, struct st_pio_control *pc)
1113 {
1114 	const struct st_pctl_data *data = info->data;
1115 	if (data->rt_style  == st_retime_style_packed)
1116 		return st_pctl_dt_setup_retime_packed(info, bank, pc);
1117 	else if (data->rt_style == st_retime_style_dedicated)
1118 		return st_pctl_dt_setup_retime_dedicated(info, bank, pc);
1119 
1120 	return -EINVAL;
1121 }
1122 
1123 
1124 static struct regmap_field *st_pc_get_value(struct device *dev,
1125 					    struct regmap *regmap, int bank,
1126 					    int data, int lsb, int msb)
1127 {
1128 	struct reg_field reg = REG_FIELD((data + bank) * 4, lsb, msb);
1129 
1130 	if (data < 0)
1131 		return NULL;
1132 
1133 	return devm_regmap_field_alloc(dev, regmap, reg);
1134 }
1135 
1136 static void st_parse_syscfgs(struct st_pinctrl *info, int bank,
1137 			     struct device_node *np)
1138 {
1139 	const struct st_pctl_data *data = info->data;
1140 	/**
1141 	 * For a given shared register like OE/PU/OD, there are 8 bits per bank
1142 	 * 0:7 belongs to bank0, 8:15 belongs to bank1 ...
1143 	 * So each register is shared across 4 banks.
1144 	 */
1145 	int lsb = (bank%4) * ST_GPIO_PINS_PER_BANK;
1146 	int msb = lsb + ST_GPIO_PINS_PER_BANK - 1;
1147 	struct st_pio_control *pc = &info->banks[bank].pc;
1148 	struct device *dev = info->dev;
1149 	struct regmap *regmap  = info->regmap;
1150 
1151 	pc->alt = st_pc_get_value(dev, regmap, bank, data->alt, 0, 31);
1152 	pc->oe = st_pc_get_value(dev, regmap, bank/4, data->oe, lsb, msb);
1153 	pc->pu = st_pc_get_value(dev, regmap, bank/4, data->pu, lsb, msb);
1154 	pc->od = st_pc_get_value(dev, regmap, bank/4, data->od, lsb, msb);
1155 
1156 	/* retime avaiable for all pins by default */
1157 	pc->rt_pin_mask = 0xff;
1158 	of_property_read_u32(np, "st,retime-pin-mask", &pc->rt_pin_mask);
1159 	st_pctl_dt_setup_retime(info, bank, pc);
1160 
1161 	return;
1162 }
1163 
1164 static int st_pctl_dt_calculate_pin(struct st_pinctrl *info,
1165 				    phandle bank, unsigned int offset)
1166 {
1167 	struct device_node *np;
1168 	struct gpio_chip *chip;
1169 	int retval = -EINVAL;
1170 	int i;
1171 
1172 	np = of_find_node_by_phandle(bank);
1173 	if (!np)
1174 		return -EINVAL;
1175 
1176 	for (i = 0; i < info->nbanks; i++) {
1177 		chip = &info->banks[i].gpio_chip;
1178 		if (chip->of_node == np) {
1179 			if (offset < chip->ngpio)
1180 				retval = chip->base + offset;
1181 			break;
1182 		}
1183 	}
1184 
1185 	of_node_put(np);
1186 	return retval;
1187 }
1188 
1189 /*
1190  * Each pin is represented in of the below forms.
1191  * <bank offset mux direction rt_type rt_delay rt_clk>
1192  */
1193 static int st_pctl_dt_parse_groups(struct device_node *np,
1194 	struct st_pctl_group *grp, struct st_pinctrl *info, int idx)
1195 {
1196 	/* bank pad direction val altfunction */
1197 	const __be32 *list;
1198 	struct property *pp;
1199 	struct device *dev = info->dev;
1200 	struct st_pinconf *conf;
1201 	struct device_node *pins;
1202 	phandle bank;
1203 	unsigned int offset;
1204 	int i = 0, npins = 0, nr_props, ret = 0;
1205 
1206 	pins = of_get_child_by_name(np, "st,pins");
1207 	if (!pins)
1208 		return -ENODATA;
1209 
1210 	for_each_property_of_node(pins, pp) {
1211 		/* Skip those we do not want to proceed */
1212 		if (!strcmp(pp->name, "name"))
1213 			continue;
1214 
1215 		if (pp->length / sizeof(__be32) >= OF_GPIO_ARGS_MIN) {
1216 			npins++;
1217 		} else {
1218 			pr_warn("Invalid st,pins in %pOFn node\n", np);
1219 			ret = -EINVAL;
1220 			goto out_put_node;
1221 		}
1222 	}
1223 
1224 	grp->npins = npins;
1225 	grp->name = np->name;
1226 	grp->pins = devm_kcalloc(dev, npins, sizeof(*grp->pins), GFP_KERNEL);
1227 	grp->pin_conf = devm_kcalloc(dev, npins, sizeof(*grp->pin_conf), GFP_KERNEL);
1228 
1229 	if (!grp->pins || !grp->pin_conf) {
1230 		ret = -ENOMEM;
1231 		goto out_put_node;
1232 	}
1233 
1234 	/* <bank offset mux direction rt_type rt_delay rt_clk> */
1235 	for_each_property_of_node(pins, pp) {
1236 		if (!strcmp(pp->name, "name"))
1237 			continue;
1238 		nr_props = pp->length/sizeof(u32);
1239 		list = pp->value;
1240 		conf = &grp->pin_conf[i];
1241 
1242 		/* bank & offset */
1243 		bank = be32_to_cpup(list++);
1244 		offset = be32_to_cpup(list++);
1245 		conf->pin = st_pctl_dt_calculate_pin(info, bank, offset);
1246 		conf->name = pp->name;
1247 		grp->pins[i] = conf->pin;
1248 		/* mux */
1249 		conf->altfunc = be32_to_cpup(list++);
1250 		conf->config = 0;
1251 		/* direction */
1252 		conf->config |= be32_to_cpup(list++);
1253 		/* rt_type rt_delay rt_clk */
1254 		if (nr_props >= OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN) {
1255 			/* rt_type */
1256 			conf->config |= be32_to_cpup(list++);
1257 			/* rt_delay */
1258 			conf->config |= be32_to_cpup(list++);
1259 			/* rt_clk */
1260 			if (nr_props > OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN)
1261 				conf->config |= be32_to_cpup(list++);
1262 		}
1263 		i++;
1264 	}
1265 
1266 out_put_node:
1267 	of_node_put(pins);
1268 
1269 	return ret;
1270 }
1271 
1272 static int st_pctl_parse_functions(struct device_node *np,
1273 			struct st_pinctrl *info, u32 index, int *grp_index)
1274 {
1275 	struct device *dev = info->dev;
1276 	struct device_node *child;
1277 	struct st_pmx_func *func;
1278 	struct st_pctl_group *grp;
1279 	int ret, i;
1280 
1281 	func = &info->functions[index];
1282 	func->name = np->name;
1283 	func->ngroups = of_get_child_count(np);
1284 	if (func->ngroups == 0)
1285 		return dev_err_probe(dev, -EINVAL, "No groups defined\n");
1286 	func->groups = devm_kcalloc(dev, func->ngroups, sizeof(*func->groups), GFP_KERNEL);
1287 	if (!func->groups)
1288 		return -ENOMEM;
1289 
1290 	i = 0;
1291 	for_each_child_of_node(np, child) {
1292 		func->groups[i] = child->name;
1293 		grp = &info->groups[*grp_index];
1294 		*grp_index += 1;
1295 		ret = st_pctl_dt_parse_groups(child, grp, info, i++);
1296 		if (ret) {
1297 			of_node_put(child);
1298 			return ret;
1299 		}
1300 	}
1301 	dev_info(dev, "Function[%d\t name:%s,\tgroups:%d]\n", index, func->name, func->ngroups);
1302 
1303 	return 0;
1304 }
1305 
1306 static void st_gpio_irq_mask(struct irq_data *d)
1307 {
1308 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1309 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1310 
1311 	writel(BIT(d->hwirq), bank->base + REG_PIO_CLR_PMASK);
1312 }
1313 
1314 static void st_gpio_irq_unmask(struct irq_data *d)
1315 {
1316 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1317 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1318 
1319 	writel(BIT(d->hwirq), bank->base + REG_PIO_SET_PMASK);
1320 }
1321 
1322 static int st_gpio_irq_request_resources(struct irq_data *d)
1323 {
1324 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1325 
1326 	st_gpio_direction_input(gc, d->hwirq);
1327 
1328 	return gpiochip_lock_as_irq(gc, d->hwirq);
1329 }
1330 
1331 static void st_gpio_irq_release_resources(struct irq_data *d)
1332 {
1333 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1334 
1335 	gpiochip_unlock_as_irq(gc, d->hwirq);
1336 }
1337 
1338 static int st_gpio_irq_set_type(struct irq_data *d, unsigned type)
1339 {
1340 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1341 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1342 	unsigned long flags;
1343 	int comp, pin = d->hwirq;
1344 	u32 val;
1345 	u32 pin_edge_conf = 0;
1346 
1347 	switch (type) {
1348 	case IRQ_TYPE_LEVEL_HIGH:
1349 		comp = 0;
1350 		break;
1351 	case IRQ_TYPE_EDGE_FALLING:
1352 		comp = 0;
1353 		pin_edge_conf = ST_IRQ_FALLING_EDGE_CONF(pin);
1354 		break;
1355 	case IRQ_TYPE_LEVEL_LOW:
1356 		comp = 1;
1357 		break;
1358 	case IRQ_TYPE_EDGE_RISING:
1359 		comp = 1;
1360 		pin_edge_conf = ST_IRQ_RISING_EDGE_CONF(pin);
1361 		break;
1362 	case IRQ_TYPE_EDGE_BOTH:
1363 		comp = st_gpio_get(&bank->gpio_chip, pin);
1364 		pin_edge_conf = ST_IRQ_BOTH_EDGE_CONF(pin);
1365 		break;
1366 	default:
1367 		return -EINVAL;
1368 	}
1369 
1370 	spin_lock_irqsave(&bank->lock, flags);
1371 	bank->irq_edge_conf &=  ~(ST_IRQ_EDGE_MASK << (
1372 				pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN));
1373 	bank->irq_edge_conf |= pin_edge_conf;
1374 	spin_unlock_irqrestore(&bank->lock, flags);
1375 
1376 	val = readl(bank->base + REG_PIO_PCOMP);
1377 	val &= ~BIT(pin);
1378 	val |= (comp << pin);
1379 	writel(val, bank->base + REG_PIO_PCOMP);
1380 
1381 	return 0;
1382 }
1383 
1384 /*
1385  * As edge triggers are not supported at hardware level, it is supported by
1386  * software by exploiting the level trigger support in hardware.
1387  *
1388  * Steps for detection raising edge interrupt in software.
1389  *
1390  * Step 1: CONFIGURE pin to detect level LOW interrupts.
1391  *
1392  * Step 2: DETECT level LOW interrupt and in irqmux/gpio bank interrupt handler,
1393  * if the value of pin is low, then CONFIGURE pin for level HIGH interrupt.
1394  * IGNORE calling the actual interrupt handler for the pin at this stage.
1395  *
1396  * Step 3: DETECT level HIGH interrupt and in irqmux/gpio-bank interrupt handler
1397  * if the value of pin is HIGH, CONFIGURE pin for level LOW interrupt and then
1398  * DISPATCH the interrupt to the interrupt handler of the pin.
1399  *
1400  *		 step-1  ________     __________
1401  *				|     | step - 3
1402  *			        |     |
1403  *			step -2 |_____|
1404  *
1405  * falling edge is also detected int the same way.
1406  *
1407  */
1408 static void __gpio_irq_handler(struct st_gpio_bank *bank)
1409 {
1410 	unsigned long port_in, port_mask, port_comp, active_irqs;
1411 	unsigned long bank_edge_mask, flags;
1412 	int n, val, ecfg;
1413 
1414 	spin_lock_irqsave(&bank->lock, flags);
1415 	bank_edge_mask = bank->irq_edge_conf;
1416 	spin_unlock_irqrestore(&bank->lock, flags);
1417 
1418 	for (;;) {
1419 		port_in = readl(bank->base + REG_PIO_PIN);
1420 		port_comp = readl(bank->base + REG_PIO_PCOMP);
1421 		port_mask = readl(bank->base + REG_PIO_PMASK);
1422 
1423 		active_irqs = (port_in ^ port_comp) & port_mask;
1424 
1425 		if (active_irqs == 0)
1426 			break;
1427 
1428 		for_each_set_bit(n, &active_irqs, BITS_PER_LONG) {
1429 			/* check if we are detecting fake edges ... */
1430 			ecfg = ST_IRQ_EDGE_CONF(bank_edge_mask, n);
1431 
1432 			if (ecfg) {
1433 				/* edge detection. */
1434 				val = st_gpio_get(&bank->gpio_chip, n);
1435 
1436 				writel(BIT(n),
1437 					val ? bank->base + REG_PIO_SET_PCOMP :
1438 					bank->base + REG_PIO_CLR_PCOMP);
1439 
1440 				if (ecfg != ST_IRQ_EDGE_BOTH &&
1441 					!((ecfg & ST_IRQ_EDGE_FALLING) ^ val))
1442 					continue;
1443 			}
1444 
1445 			generic_handle_domain_irq(bank->gpio_chip.irq.domain, n);
1446 		}
1447 	}
1448 }
1449 
1450 static void st_gpio_irq_handler(struct irq_desc *desc)
1451 {
1452 	/* interrupt dedicated per bank */
1453 	struct irq_chip *chip = irq_desc_get_chip(desc);
1454 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
1455 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1456 
1457 	chained_irq_enter(chip, desc);
1458 	__gpio_irq_handler(bank);
1459 	chained_irq_exit(chip, desc);
1460 }
1461 
1462 static void st_gpio_irqmux_handler(struct irq_desc *desc)
1463 {
1464 	struct irq_chip *chip = irq_desc_get_chip(desc);
1465 	struct st_pinctrl *info = irq_desc_get_handler_data(desc);
1466 	unsigned long status;
1467 	int n;
1468 
1469 	chained_irq_enter(chip, desc);
1470 
1471 	status = readl(info->irqmux_base);
1472 
1473 	for_each_set_bit(n, &status, info->nbanks)
1474 		__gpio_irq_handler(&info->banks[n]);
1475 
1476 	chained_irq_exit(chip, desc);
1477 }
1478 
1479 static const struct gpio_chip st_gpio_template = {
1480 	.request		= gpiochip_generic_request,
1481 	.free			= gpiochip_generic_free,
1482 	.get			= st_gpio_get,
1483 	.set			= st_gpio_set,
1484 	.direction_input	= st_gpio_direction_input,
1485 	.direction_output	= st_gpio_direction_output,
1486 	.get_direction		= st_gpio_get_direction,
1487 	.ngpio			= ST_GPIO_PINS_PER_BANK,
1488 };
1489 
1490 static struct irq_chip st_gpio_irqchip = {
1491 	.name			= "GPIO",
1492 	.irq_request_resources	= st_gpio_irq_request_resources,
1493 	.irq_release_resources	= st_gpio_irq_release_resources,
1494 	.irq_disable		= st_gpio_irq_mask,
1495 	.irq_mask		= st_gpio_irq_mask,
1496 	.irq_unmask		= st_gpio_irq_unmask,
1497 	.irq_set_type		= st_gpio_irq_set_type,
1498 	.flags			= IRQCHIP_SKIP_SET_WAKE,
1499 };
1500 
1501 static int st_gpiolib_register_bank(struct st_pinctrl *info,
1502 	int bank_nr, struct device_node *np)
1503 {
1504 	struct st_gpio_bank *bank = &info->banks[bank_nr];
1505 	struct pinctrl_gpio_range *range = &bank->range;
1506 	struct device *dev = info->dev;
1507 	int bank_num = of_alias_get_id(np, "gpio");
1508 	struct resource res, irq_res;
1509 	int err;
1510 
1511 	if (of_address_to_resource(np, 0, &res))
1512 		return -ENODEV;
1513 
1514 	bank->base = devm_ioremap_resource(dev, &res);
1515 	if (IS_ERR(bank->base))
1516 		return PTR_ERR(bank->base);
1517 
1518 	bank->gpio_chip = st_gpio_template;
1519 	bank->gpio_chip.base = bank_num * ST_GPIO_PINS_PER_BANK;
1520 	bank->gpio_chip.ngpio = ST_GPIO_PINS_PER_BANK;
1521 	bank->gpio_chip.of_node = np;
1522 	bank->gpio_chip.parent = dev;
1523 	spin_lock_init(&bank->lock);
1524 
1525 	of_property_read_string(np, "st,bank-name", &range->name);
1526 	bank->gpio_chip.label = range->name;
1527 
1528 	range->id = bank_num;
1529 	range->pin_base = range->base = range->id * ST_GPIO_PINS_PER_BANK;
1530 	range->npins = bank->gpio_chip.ngpio;
1531 	range->gc = &bank->gpio_chip;
1532 
1533 	/**
1534 	 * GPIO bank can have one of the two possible types of
1535 	 * interrupt-wirings.
1536 	 *
1537 	 * First type is via irqmux, single interrupt is used by multiple
1538 	 * gpio banks. This reduces number of overall interrupts numbers
1539 	 * required. All these banks belong to a single pincontroller.
1540 	 *		  _________
1541 	 *		 |	   |----> [gpio-bank (n)    ]
1542 	 *		 |	   |----> [gpio-bank (n + 1)]
1543 	 *	[irqN]-- | irq-mux |----> [gpio-bank (n + 2)]
1544 	 *		 |	   |----> [gpio-bank (...  )]
1545 	 *		 |_________|----> [gpio-bank (n + 7)]
1546 	 *
1547 	 * Second type has a dedicated interrupt per each gpio bank.
1548 	 *
1549 	 *	[irqN]----> [gpio-bank (n)]
1550 	 */
1551 
1552 	if (of_irq_to_resource(np, 0, &irq_res) > 0) {
1553 		struct gpio_irq_chip *girq;
1554 		int gpio_irq = irq_res.start;
1555 
1556 		/* This is not a valid IRQ */
1557 		if (gpio_irq <= 0) {
1558 			dev_err(dev, "invalid IRQ for %pOF bank\n", np);
1559 			goto skip_irq;
1560 		}
1561 		/* We need to have a mux as well */
1562 		if (!info->irqmux_base) {
1563 			dev_err(dev, "no irqmux for %pOF bank\n", np);
1564 			goto skip_irq;
1565 		}
1566 
1567 		girq = &bank->gpio_chip.irq;
1568 		girq->chip = &st_gpio_irqchip;
1569 		girq->parent_handler = st_gpio_irq_handler;
1570 		girq->num_parents = 1;
1571 		girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
1572 					     GFP_KERNEL);
1573 		if (!girq->parents)
1574 			return -ENOMEM;
1575 		girq->parents[0] = gpio_irq;
1576 		girq->default_type = IRQ_TYPE_NONE;
1577 		girq->handler = handle_simple_irq;
1578 	}
1579 
1580 skip_irq:
1581 	err  = gpiochip_add_data(&bank->gpio_chip, bank);
1582 	if (err)
1583 		return dev_err_probe(dev, err, "Failed to add gpiochip(%d)!\n", bank_num);
1584 	dev_info(dev, "%s bank added.\n", range->name);
1585 
1586 	return 0;
1587 }
1588 
1589 static const struct of_device_id st_pctl_of_match[] = {
1590 	{ .compatible = "st,stih407-sbc-pinctrl", .data = &stih407_data},
1591 	{ .compatible = "st,stih407-front-pinctrl", .data = &stih407_data},
1592 	{ .compatible = "st,stih407-rear-pinctrl", .data = &stih407_data},
1593 	{ .compatible = "st,stih407-flash-pinctrl", .data = &stih407_flashdata},
1594 	{ /* sentinel */ }
1595 };
1596 
1597 static int st_pctl_probe_dt(struct platform_device *pdev,
1598 	struct pinctrl_desc *pctl_desc, struct st_pinctrl *info)
1599 {
1600 	struct device *dev = &pdev->dev;
1601 	int ret = 0;
1602 	int i = 0, j = 0, k = 0, bank;
1603 	struct pinctrl_pin_desc *pdesc;
1604 	struct device_node *np = dev->of_node;
1605 	struct device_node *child;
1606 	int grp_index = 0;
1607 	int irq = 0;
1608 
1609 	st_pctl_dt_child_count(info, np);
1610 	if (!info->nbanks)
1611 		return dev_err_probe(dev, -EINVAL, "you need at least one gpio bank\n");
1612 
1613 	dev_info(dev, "nbanks = %d\n", info->nbanks);
1614 	dev_info(dev, "nfunctions = %d\n", info->nfunctions);
1615 	dev_info(dev, "ngroups = %d\n", info->ngroups);
1616 
1617 	info->functions = devm_kcalloc(dev, info->nfunctions, sizeof(*info->functions), GFP_KERNEL);
1618 
1619 	info->groups = devm_kcalloc(dev, info->ngroups, sizeof(*info->groups), GFP_KERNEL);
1620 
1621 	info->banks = devm_kcalloc(dev, info->nbanks, sizeof(*info->banks), GFP_KERNEL);
1622 
1623 	if (!info->functions || !info->groups || !info->banks)
1624 		return -ENOMEM;
1625 
1626 	info->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
1627 	if (IS_ERR(info->regmap))
1628 		return dev_err_probe(dev, PTR_ERR(info->regmap), "No syscfg phandle specified\n");
1629 	info->data = of_match_node(st_pctl_of_match, np)->data;
1630 
1631 	irq = platform_get_irq(pdev, 0);
1632 
1633 	if (irq > 0) {
1634 		info->irqmux_base = devm_platform_ioremap_resource_byname(pdev, "irqmux");
1635 		if (IS_ERR(info->irqmux_base))
1636 			return PTR_ERR(info->irqmux_base);
1637 
1638 		irq_set_chained_handler_and_data(irq, st_gpio_irqmux_handler,
1639 						 info);
1640 	}
1641 
1642 	pctl_desc->npins = info->nbanks * ST_GPIO_PINS_PER_BANK;
1643 	pdesc =	devm_kcalloc(dev, pctl_desc->npins, sizeof(*pdesc), GFP_KERNEL);
1644 	if (!pdesc)
1645 		return -ENOMEM;
1646 
1647 	pctl_desc->pins = pdesc;
1648 
1649 	bank = 0;
1650 	for_each_child_of_node(np, child) {
1651 		if (of_property_read_bool(child, "gpio-controller")) {
1652 			const char *bank_name = NULL;
1653 			char **pin_names;
1654 
1655 			ret = st_gpiolib_register_bank(info, bank, child);
1656 			if (ret) {
1657 				of_node_put(child);
1658 				return ret;
1659 			}
1660 
1661 			k = info->banks[bank].range.pin_base;
1662 			bank_name = info->banks[bank].range.name;
1663 
1664 			pin_names = devm_kasprintf_strarray(dev, bank_name, ST_GPIO_PINS_PER_BANK);
1665 			if (IS_ERR(pin_names)) {
1666 				of_node_put(child);
1667 				return PTR_ERR(pin_names);
1668 			}
1669 
1670 			for (j = 0; j < ST_GPIO_PINS_PER_BANK; j++, k++) {
1671 				pdesc->number = k;
1672 				pdesc->name = pin_names[j];
1673 				pdesc++;
1674 			}
1675 			st_parse_syscfgs(info, bank, child);
1676 			bank++;
1677 		} else {
1678 			ret = st_pctl_parse_functions(child, info,
1679 							i++, &grp_index);
1680 			if (ret) {
1681 				dev_err(dev, "No functions found.\n");
1682 				of_node_put(child);
1683 				return ret;
1684 			}
1685 		}
1686 	}
1687 
1688 	return 0;
1689 }
1690 
1691 static int st_pctl_probe(struct platform_device *pdev)
1692 {
1693 	struct device *dev = &pdev->dev;
1694 	struct st_pinctrl *info;
1695 	struct pinctrl_desc *pctl_desc;
1696 	int ret, i;
1697 
1698 	if (!dev->of_node) {
1699 		dev_err(dev, "device node not found.\n");
1700 		return -EINVAL;
1701 	}
1702 
1703 	pctl_desc = devm_kzalloc(dev, sizeof(*pctl_desc), GFP_KERNEL);
1704 	if (!pctl_desc)
1705 		return -ENOMEM;
1706 
1707 	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
1708 	if (!info)
1709 		return -ENOMEM;
1710 
1711 	info->dev = dev;
1712 	platform_set_drvdata(pdev, info);
1713 	ret = st_pctl_probe_dt(pdev, pctl_desc, info);
1714 	if (ret)
1715 		return ret;
1716 
1717 	pctl_desc->owner	= THIS_MODULE;
1718 	pctl_desc->pctlops	= &st_pctlops;
1719 	pctl_desc->pmxops	= &st_pmxops;
1720 	pctl_desc->confops	= &st_confops;
1721 	pctl_desc->name		= dev_name(dev);
1722 
1723 	info->pctl = devm_pinctrl_register(dev, pctl_desc, info);
1724 	if (IS_ERR(info->pctl))
1725 		return dev_err_probe(dev, PTR_ERR(info->pctl), "Failed pinctrl registration\n");
1726 
1727 	for (i = 0; i < info->nbanks; i++)
1728 		pinctrl_add_gpio_range(info->pctl, &info->banks[i].range);
1729 
1730 	return 0;
1731 }
1732 
1733 static struct platform_driver st_pctl_driver = {
1734 	.driver = {
1735 		.name = "st-pinctrl",
1736 		.of_match_table = st_pctl_of_match,
1737 	},
1738 	.probe = st_pctl_probe,
1739 };
1740 
1741 static int __init st_pctl_init(void)
1742 {
1743 	return platform_driver_register(&st_pctl_driver);
1744 }
1745 arch_initcall(st_pctl_init);
1746