xref: /openbmc/linux/drivers/pinctrl/pinctrl-st.c (revision 236bdb88)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
4  * Authors:
5  *	Srinivas Kandagatla <srinivas.kandagatla@st.com>
6  */
7 
8 #include <linux/err.h>
9 #include <linux/gpio/driver.h>
10 #include <linux/init.h>
11 #include <linux/io.h>
12 #include <linux/mfd/syscon.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/of_address.h>
16 #include <linux/of_irq.h>
17 #include <linux/platform_device.h>
18 #include <linux/regmap.h>
19 #include <linux/seq_file.h>
20 #include <linux/slab.h>
21 #include <linux/string_helpers.h>
22 
23 #include <linux/pinctrl/consumer.h>
24 #include <linux/pinctrl/pinconf.h>
25 #include <linux/pinctrl/pinctrl.h>
26 #include <linux/pinctrl/pinmux.h>
27 
28 #include "core.h"
29 
30 /* PIO Block registers */
31 /* PIO output */
32 #define REG_PIO_POUT			0x00
33 /* Set bits of POUT */
34 #define REG_PIO_SET_POUT		0x04
35 /* Clear bits of POUT */
36 #define REG_PIO_CLR_POUT		0x08
37 /* PIO input */
38 #define REG_PIO_PIN			0x10
39 /* PIO configuration */
40 #define REG_PIO_PC(n)			(0x20 + (n) * 0x10)
41 /* Set bits of PC[2:0] */
42 #define REG_PIO_SET_PC(n)		(0x24 + (n) * 0x10)
43 /* Clear bits of PC[2:0] */
44 #define REG_PIO_CLR_PC(n)		(0x28 + (n) * 0x10)
45 /* PIO input comparison */
46 #define REG_PIO_PCOMP			0x50
47 /* Set bits of PCOMP */
48 #define REG_PIO_SET_PCOMP		0x54
49 /* Clear bits of PCOMP */
50 #define REG_PIO_CLR_PCOMP		0x58
51 /* PIO input comparison mask */
52 #define REG_PIO_PMASK			0x60
53 /* Set bits of PMASK */
54 #define REG_PIO_SET_PMASK		0x64
55 /* Clear bits of PMASK */
56 #define REG_PIO_CLR_PMASK		0x68
57 
58 #define ST_GPIO_DIRECTION_BIDIR	0x1
59 #define ST_GPIO_DIRECTION_OUT	0x2
60 #define ST_GPIO_DIRECTION_IN	0x4
61 
62 /*
63  *  Packed style retime configuration.
64  *  There are two registers cfg0 and cfg1 in this style for each bank.
65  *  Each field in this register is 8 bit corresponding to 8 pins in the bank.
66  */
67 #define RT_P_CFGS_PER_BANK			2
68 #define RT_P_CFG0_CLK1NOTCLK0_FIELD(reg)	REG_FIELD(reg, 0, 7)
69 #define RT_P_CFG0_DELAY_0_FIELD(reg)		REG_FIELD(reg, 16, 23)
70 #define RT_P_CFG0_DELAY_1_FIELD(reg)		REG_FIELD(reg, 24, 31)
71 #define RT_P_CFG1_INVERTCLK_FIELD(reg)		REG_FIELD(reg, 0, 7)
72 #define RT_P_CFG1_RETIME_FIELD(reg)		REG_FIELD(reg, 8, 15)
73 #define RT_P_CFG1_CLKNOTDATA_FIELD(reg)		REG_FIELD(reg, 16, 23)
74 #define RT_P_CFG1_DOUBLE_EDGE_FIELD(reg)	REG_FIELD(reg, 24, 31)
75 
76 /*
77  * Dedicated style retime Configuration register
78  * each register is dedicated per pin.
79  */
80 #define RT_D_CFGS_PER_BANK		8
81 #define RT_D_CFG_CLK_SHIFT		0
82 #define RT_D_CFG_CLK_MASK		(0x3 << 0)
83 #define RT_D_CFG_CLKNOTDATA_SHIFT	2
84 #define RT_D_CFG_CLKNOTDATA_MASK	BIT(2)
85 #define RT_D_CFG_DELAY_SHIFT		3
86 #define RT_D_CFG_DELAY_MASK		(0xf << 3)
87 #define RT_D_CFG_DELAY_INNOTOUT_SHIFT	7
88 #define RT_D_CFG_DELAY_INNOTOUT_MASK	BIT(7)
89 #define RT_D_CFG_DOUBLE_EDGE_SHIFT	8
90 #define RT_D_CFG_DOUBLE_EDGE_MASK	BIT(8)
91 #define RT_D_CFG_INVERTCLK_SHIFT	9
92 #define RT_D_CFG_INVERTCLK_MASK		BIT(9)
93 #define RT_D_CFG_RETIME_SHIFT		10
94 #define RT_D_CFG_RETIME_MASK		BIT(10)
95 
96 /*
97  * Pinconf is represented in an opaque unsigned long variable.
98  * Below is the bit allocation details for each possible configuration.
99  * All the bit fields can be encapsulated into four variables
100  * (direction, retime-type, retime-clk, retime-delay)
101  *
102  *	 +----------------+
103  *[31:28]| reserved-3     |
104  *	 +----------------+-------------
105  *[27]   |	oe	  |		|
106  *	 +----------------+		v
107  *[26]   |	pu	  |	[Direction	]
108  *	 +----------------+		^
109  *[25]   |	od	  |		|
110  *	 +----------------+-------------
111  *[24]   | reserved-2     |
112  *	 +----------------+-------------
113  *[23]   |    retime      |		|
114  *	 +----------------+		|
115  *[22]   | retime-invclk  |		|
116  *	 +----------------+		v
117  *[21]   |retime-clknotdat|	[Retime-type	]
118  *	 +----------------+		^
119  *[20]   | retime-de      |		|
120  *	 +----------------+-------------
121  *[19:18]| retime-clk     |------>[Retime-Clk	]
122  *	 +----------------+
123  *[17:16]|  reserved-1    |
124  *	 +----------------+
125  *[15..0]| retime-delay   |------>[Retime Delay]
126  *	 +----------------+
127  */
128 
129 #define ST_PINCONF_UNPACK(conf, param)\
130 				((conf >> ST_PINCONF_ ##param ##_SHIFT) \
131 				& ST_PINCONF_ ##param ##_MASK)
132 
133 #define ST_PINCONF_PACK(conf, val, param)	(conf |=\
134 				((val & ST_PINCONF_ ##param ##_MASK) << \
135 					ST_PINCONF_ ##param ##_SHIFT))
136 
137 /* Output enable */
138 #define ST_PINCONF_OE_MASK		0x1
139 #define ST_PINCONF_OE_SHIFT		27
140 #define ST_PINCONF_OE			BIT(27)
141 #define ST_PINCONF_UNPACK_OE(conf)	ST_PINCONF_UNPACK(conf, OE)
142 #define ST_PINCONF_PACK_OE(conf)	ST_PINCONF_PACK(conf, 1, OE)
143 
144 /* Pull Up */
145 #define ST_PINCONF_PU_MASK		0x1
146 #define ST_PINCONF_PU_SHIFT		26
147 #define ST_PINCONF_PU			BIT(26)
148 #define ST_PINCONF_UNPACK_PU(conf)	ST_PINCONF_UNPACK(conf, PU)
149 #define ST_PINCONF_PACK_PU(conf)	ST_PINCONF_PACK(conf, 1, PU)
150 
151 /* Open Drain */
152 #define ST_PINCONF_OD_MASK		0x1
153 #define ST_PINCONF_OD_SHIFT		25
154 #define ST_PINCONF_OD			BIT(25)
155 #define ST_PINCONF_UNPACK_OD(conf)	ST_PINCONF_UNPACK(conf, OD)
156 #define ST_PINCONF_PACK_OD(conf)	ST_PINCONF_PACK(conf, 1, OD)
157 
158 #define ST_PINCONF_RT_MASK		0x1
159 #define ST_PINCONF_RT_SHIFT		23
160 #define ST_PINCONF_RT			BIT(23)
161 #define ST_PINCONF_UNPACK_RT(conf)	ST_PINCONF_UNPACK(conf, RT)
162 #define ST_PINCONF_PACK_RT(conf)	ST_PINCONF_PACK(conf, 1, RT)
163 
164 #define ST_PINCONF_RT_INVERTCLK_MASK	0x1
165 #define ST_PINCONF_RT_INVERTCLK_SHIFT	22
166 #define ST_PINCONF_RT_INVERTCLK		BIT(22)
167 #define ST_PINCONF_UNPACK_RT_INVERTCLK(conf) \
168 			ST_PINCONF_UNPACK(conf, RT_INVERTCLK)
169 #define ST_PINCONF_PACK_RT_INVERTCLK(conf) \
170 			ST_PINCONF_PACK(conf, 1, RT_INVERTCLK)
171 
172 #define ST_PINCONF_RT_CLKNOTDATA_MASK	0x1
173 #define ST_PINCONF_RT_CLKNOTDATA_SHIFT	21
174 #define ST_PINCONF_RT_CLKNOTDATA	BIT(21)
175 #define ST_PINCONF_UNPACK_RT_CLKNOTDATA(conf)	\
176 				ST_PINCONF_UNPACK(conf, RT_CLKNOTDATA)
177 #define ST_PINCONF_PACK_RT_CLKNOTDATA(conf) \
178 				ST_PINCONF_PACK(conf, 1, RT_CLKNOTDATA)
179 
180 #define ST_PINCONF_RT_DOUBLE_EDGE_MASK	0x1
181 #define ST_PINCONF_RT_DOUBLE_EDGE_SHIFT	20
182 #define ST_PINCONF_RT_DOUBLE_EDGE	BIT(20)
183 #define ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(conf) \
184 				ST_PINCONF_UNPACK(conf, RT_DOUBLE_EDGE)
185 #define ST_PINCONF_PACK_RT_DOUBLE_EDGE(conf) \
186 				ST_PINCONF_PACK(conf, 1, RT_DOUBLE_EDGE)
187 
188 #define ST_PINCONF_RT_CLK_MASK		0x3
189 #define ST_PINCONF_RT_CLK_SHIFT		18
190 #define ST_PINCONF_RT_CLK		BIT(18)
191 #define ST_PINCONF_UNPACK_RT_CLK(conf)	ST_PINCONF_UNPACK(conf, RT_CLK)
192 #define ST_PINCONF_PACK_RT_CLK(conf, val) ST_PINCONF_PACK(conf, val, RT_CLK)
193 
194 /* RETIME_DELAY in Pico Secs */
195 #define ST_PINCONF_RT_DELAY_MASK	0xffff
196 #define ST_PINCONF_RT_DELAY_SHIFT	0
197 #define ST_PINCONF_UNPACK_RT_DELAY(conf) ST_PINCONF_UNPACK(conf, RT_DELAY)
198 #define ST_PINCONF_PACK_RT_DELAY(conf, val) \
199 				ST_PINCONF_PACK(conf, val, RT_DELAY)
200 
201 #define ST_GPIO_PINS_PER_BANK	(8)
202 #define OF_GPIO_ARGS_MIN	(4)
203 #define OF_RT_ARGS_MIN		(2)
204 
205 #define gpio_range_to_bank(chip) \
206 		container_of(chip, struct st_gpio_bank, range)
207 
208 #define pc_to_bank(pc) \
209 		container_of(pc, struct st_gpio_bank, pc)
210 
211 enum st_retime_style {
212 	st_retime_style_none,
213 	st_retime_style_packed,
214 	st_retime_style_dedicated,
215 };
216 
217 struct st_retime_dedicated {
218 	struct regmap_field *rt[ST_GPIO_PINS_PER_BANK];
219 };
220 
221 struct st_retime_packed {
222 	struct regmap_field *clk1notclk0;
223 	struct regmap_field *delay_0;
224 	struct regmap_field *delay_1;
225 	struct regmap_field *invertclk;
226 	struct regmap_field *retime;
227 	struct regmap_field *clknotdata;
228 	struct regmap_field *double_edge;
229 };
230 
231 struct st_pio_control {
232 	u32 rt_pin_mask;
233 	struct regmap_field *alt, *oe, *pu, *od;
234 	/* retiming */
235 	union {
236 		struct st_retime_packed		rt_p;
237 		struct st_retime_dedicated	rt_d;
238 	} rt;
239 };
240 
241 struct st_pctl_data {
242 	const enum st_retime_style	rt_style;
243 	const unsigned int		*input_delays;
244 	const int			ninput_delays;
245 	const unsigned int		*output_delays;
246 	const int			noutput_delays;
247 	/* register offset information */
248 	const int alt, oe, pu, od, rt;
249 };
250 
251 struct st_pinconf {
252 	int		pin;
253 	const char	*name;
254 	unsigned long	config;
255 	int		altfunc;
256 };
257 
258 struct st_pmx_func {
259 	const char	*name;
260 	const char	**groups;
261 	unsigned	ngroups;
262 };
263 
264 struct st_pctl_group {
265 	const char		*name;
266 	unsigned int		*pins;
267 	unsigned		npins;
268 	struct st_pinconf	*pin_conf;
269 };
270 
271 /*
272  * Edge triggers are not supported at hardware level, it is supported by
273  * software by exploiting the level trigger support in hardware.
274  * Software uses a virtual register (EDGE_CONF) for edge trigger configuration
275  * of each gpio pin in a GPIO bank.
276  *
277  * Each bank has a 32 bit EDGE_CONF register which is divided in to 8 parts of
278  * 4-bits. Each 4-bit space is allocated for each pin in a gpio bank.
279  *
280  * bit allocation per pin is:
281  * Bits:  [0 - 3] | [4 - 7]  [8 - 11] ... ... ... ...  [ 28 - 31]
282  *       --------------------------------------------------------
283  *       |  pin-0  |  pin-2 | pin-3  | ... ... ... ... | pin -7 |
284  *       --------------------------------------------------------
285  *
286  *  A pin can have one of following the values in its edge configuration field.
287  *
288  *	-------   ----------------------------
289  *	[0-3]	- Description
290  *	-------   ----------------------------
291  *	0000	- No edge IRQ.
292  *	0001	- Falling edge IRQ.
293  *	0010	- Rising edge IRQ.
294  *	0011	- Rising and Falling edge IRQ.
295  *	-------   ----------------------------
296  */
297 
298 #define ST_IRQ_EDGE_CONF_BITS_PER_PIN	4
299 #define ST_IRQ_EDGE_MASK		0xf
300 #define ST_IRQ_EDGE_FALLING		BIT(0)
301 #define ST_IRQ_EDGE_RISING		BIT(1)
302 #define ST_IRQ_EDGE_BOTH		(BIT(0) | BIT(1))
303 
304 #define ST_IRQ_RISING_EDGE_CONF(pin) \
305 	(ST_IRQ_EDGE_RISING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
306 
307 #define ST_IRQ_FALLING_EDGE_CONF(pin) \
308 	(ST_IRQ_EDGE_FALLING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
309 
310 #define ST_IRQ_BOTH_EDGE_CONF(pin) \
311 	(ST_IRQ_EDGE_BOTH << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
312 
313 #define ST_IRQ_EDGE_CONF(conf, pin) \
314 	(conf >> (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN) & ST_IRQ_EDGE_MASK)
315 
316 struct st_gpio_bank {
317 	struct gpio_chip		gpio_chip;
318 	struct pinctrl_gpio_range	range;
319 	void __iomem			*base;
320 	struct st_pio_control		pc;
321 	unsigned long			irq_edge_conf;
322 	spinlock_t                      lock;
323 };
324 
325 struct st_pinctrl {
326 	struct device			*dev;
327 	struct pinctrl_dev		*pctl;
328 	struct st_gpio_bank		*banks;
329 	int				nbanks;
330 	struct st_pmx_func		*functions;
331 	int				nfunctions;
332 	struct st_pctl_group		*groups;
333 	int				ngroups;
334 	struct regmap			*regmap;
335 	const struct st_pctl_data	*data;
336 	void __iomem			*irqmux_base;
337 };
338 
339 /* SOC specific data */
340 
341 static const unsigned int stih407_delays[] = {0, 300, 500, 750, 1000, 1250,
342 			1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250 };
343 
344 static const struct st_pctl_data  stih407_data = {
345 	.rt_style       = st_retime_style_dedicated,
346 	.input_delays   = stih407_delays,
347 	.ninput_delays  = ARRAY_SIZE(stih407_delays),
348 	.output_delays  = stih407_delays,
349 	.noutput_delays = ARRAY_SIZE(stih407_delays),
350 	.alt = 0, .oe = 40, .pu = 50, .od = 60, .rt = 100,
351 };
352 
353 static const struct st_pctl_data stih407_flashdata = {
354 	.rt_style	= st_retime_style_none,
355 	.input_delays	= stih407_delays,
356 	.ninput_delays	= ARRAY_SIZE(stih407_delays),
357 	.output_delays	= stih407_delays,
358 	.noutput_delays = ARRAY_SIZE(stih407_delays),
359 	.alt = 0,
360 	.oe = -1, /* Not Available */
361 	.pu = -1, /* Not Available */
362 	.od = 60,
363 	.rt = 100,
364 };
365 
366 static struct st_pio_control *st_get_pio_control(
367 			struct pinctrl_dev *pctldev, int pin)
368 {
369 	struct pinctrl_gpio_range *range =
370 			 pinctrl_find_gpio_range_from_pin(pctldev, pin);
371 	struct st_gpio_bank *bank = gpio_range_to_bank(range);
372 
373 	return &bank->pc;
374 }
375 
376 /* Low level functions.. */
377 static inline int st_gpio_bank(int gpio)
378 {
379 	return gpio/ST_GPIO_PINS_PER_BANK;
380 }
381 
382 static inline int st_gpio_pin(int gpio)
383 {
384 	return gpio%ST_GPIO_PINS_PER_BANK;
385 }
386 
387 static void st_pinconf_set_config(struct st_pio_control *pc,
388 				int pin, unsigned long config)
389 {
390 	struct regmap_field *output_enable = pc->oe;
391 	struct regmap_field *pull_up = pc->pu;
392 	struct regmap_field *open_drain = pc->od;
393 	unsigned int oe_value, pu_value, od_value;
394 	unsigned long mask = BIT(pin);
395 
396 	if (output_enable) {
397 		regmap_field_read(output_enable, &oe_value);
398 		oe_value &= ~mask;
399 		if (config & ST_PINCONF_OE)
400 			oe_value |= mask;
401 		regmap_field_write(output_enable, oe_value);
402 	}
403 
404 	if (pull_up) {
405 		regmap_field_read(pull_up, &pu_value);
406 		pu_value &= ~mask;
407 		if (config & ST_PINCONF_PU)
408 			pu_value |= mask;
409 		regmap_field_write(pull_up, pu_value);
410 	}
411 
412 	if (open_drain) {
413 		regmap_field_read(open_drain, &od_value);
414 		od_value &= ~mask;
415 		if (config & ST_PINCONF_OD)
416 			od_value |= mask;
417 		regmap_field_write(open_drain, od_value);
418 	}
419 }
420 
421 static void st_pctl_set_function(struct st_pio_control *pc,
422 				int pin_id, int function)
423 {
424 	struct regmap_field *alt = pc->alt;
425 	unsigned int val;
426 	int pin = st_gpio_pin(pin_id);
427 	int offset = pin * 4;
428 
429 	if (!alt)
430 		return;
431 
432 	regmap_field_read(alt, &val);
433 	val &= ~(0xf << offset);
434 	val |= function << offset;
435 	regmap_field_write(alt, val);
436 }
437 
438 static unsigned int st_pctl_get_pin_function(struct st_pio_control *pc, int pin)
439 {
440 	struct regmap_field *alt = pc->alt;
441 	unsigned int val;
442 	int offset = pin * 4;
443 
444 	if (!alt)
445 		return 0;
446 
447 	regmap_field_read(alt, &val);
448 
449 	return (val >> offset) & 0xf;
450 }
451 
452 static unsigned long st_pinconf_delay_to_bit(unsigned int delay,
453 	const struct st_pctl_data *data, unsigned long config)
454 {
455 	const unsigned int *delay_times;
456 	int num_delay_times, i, closest_index = -1;
457 	unsigned int closest_divergence = UINT_MAX;
458 
459 	if (ST_PINCONF_UNPACK_OE(config)) {
460 		delay_times = data->output_delays;
461 		num_delay_times = data->noutput_delays;
462 	} else {
463 		delay_times = data->input_delays;
464 		num_delay_times = data->ninput_delays;
465 	}
466 
467 	for (i = 0; i < num_delay_times; i++) {
468 		unsigned int divergence = abs(delay - delay_times[i]);
469 
470 		if (divergence == 0)
471 			return i;
472 
473 		if (divergence < closest_divergence) {
474 			closest_divergence = divergence;
475 			closest_index = i;
476 		}
477 	}
478 
479 	pr_warn("Attempt to set delay %d, closest available %d\n",
480 	     delay, delay_times[closest_index]);
481 
482 	return closest_index;
483 }
484 
485 static unsigned long st_pinconf_bit_to_delay(unsigned int index,
486 	const struct st_pctl_data *data, unsigned long output)
487 {
488 	const unsigned int *delay_times;
489 	int num_delay_times;
490 
491 	if (output) {
492 		delay_times = data->output_delays;
493 		num_delay_times = data->noutput_delays;
494 	} else {
495 		delay_times = data->input_delays;
496 		num_delay_times = data->ninput_delays;
497 	}
498 
499 	if (index < num_delay_times) {
500 		return delay_times[index];
501 	} else {
502 		pr_warn("Delay not found in/out delay list\n");
503 		return 0;
504 	}
505 }
506 
507 static void st_regmap_field_bit_set_clear_pin(struct regmap_field *field,
508 	int enable, int pin)
509 {
510 	unsigned int val = 0;
511 
512 	regmap_field_read(field, &val);
513 	if (enable)
514 		val |= BIT(pin);
515 	else
516 		val &= ~BIT(pin);
517 	regmap_field_write(field, val);
518 }
519 
520 static void st_pinconf_set_retime_packed(struct st_pinctrl *info,
521 	struct st_pio_control *pc,	unsigned long config, int pin)
522 {
523 	const struct st_pctl_data *data = info->data;
524 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
525 	unsigned int delay;
526 
527 	st_regmap_field_bit_set_clear_pin(rt_p->clk1notclk0,
528 				ST_PINCONF_UNPACK_RT_CLK(config), pin);
529 
530 	st_regmap_field_bit_set_clear_pin(rt_p->clknotdata,
531 				ST_PINCONF_UNPACK_RT_CLKNOTDATA(config), pin);
532 
533 	st_regmap_field_bit_set_clear_pin(rt_p->double_edge,
534 				ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config), pin);
535 
536 	st_regmap_field_bit_set_clear_pin(rt_p->invertclk,
537 				ST_PINCONF_UNPACK_RT_INVERTCLK(config), pin);
538 
539 	st_regmap_field_bit_set_clear_pin(rt_p->retime,
540 				ST_PINCONF_UNPACK_RT(config), pin);
541 
542 	delay = st_pinconf_delay_to_bit(ST_PINCONF_UNPACK_RT_DELAY(config),
543 					data, config);
544 	/* 2 bit delay, lsb */
545 	st_regmap_field_bit_set_clear_pin(rt_p->delay_0, delay & 0x1, pin);
546 	/* 2 bit delay, msb */
547 	st_regmap_field_bit_set_clear_pin(rt_p->delay_1, delay & 0x2, pin);
548 }
549 
550 static void st_pinconf_set_retime_dedicated(struct st_pinctrl *info,
551 	struct st_pio_control *pc, unsigned long config, int pin)
552 {
553 	int input	= ST_PINCONF_UNPACK_OE(config) ? 0 : 1;
554 	int clk		= ST_PINCONF_UNPACK_RT_CLK(config);
555 	int clknotdata	= ST_PINCONF_UNPACK_RT_CLKNOTDATA(config);
556 	int double_edge	= ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config);
557 	int invertclk	= ST_PINCONF_UNPACK_RT_INVERTCLK(config);
558 	int retime	= ST_PINCONF_UNPACK_RT(config);
559 
560 	unsigned long delay = st_pinconf_delay_to_bit(
561 			ST_PINCONF_UNPACK_RT_DELAY(config),
562 			info->data, config);
563 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
564 
565 	unsigned long retime_config =
566 		((clk) << RT_D_CFG_CLK_SHIFT) |
567 		((delay) << RT_D_CFG_DELAY_SHIFT) |
568 		((input) << RT_D_CFG_DELAY_INNOTOUT_SHIFT) |
569 		((retime) << RT_D_CFG_RETIME_SHIFT) |
570 		((clknotdata) << RT_D_CFG_CLKNOTDATA_SHIFT) |
571 		((invertclk) << RT_D_CFG_INVERTCLK_SHIFT) |
572 		((double_edge) << RT_D_CFG_DOUBLE_EDGE_SHIFT);
573 
574 	regmap_field_write(rt_d->rt[pin], retime_config);
575 }
576 
577 static void st_pinconf_get_direction(struct st_pio_control *pc,
578 	int pin, unsigned long *config)
579 {
580 	unsigned int oe_value, pu_value, od_value;
581 
582 	if (pc->oe) {
583 		regmap_field_read(pc->oe, &oe_value);
584 		if (oe_value & BIT(pin))
585 			ST_PINCONF_PACK_OE(*config);
586 	}
587 
588 	if (pc->pu) {
589 		regmap_field_read(pc->pu, &pu_value);
590 		if (pu_value & BIT(pin))
591 			ST_PINCONF_PACK_PU(*config);
592 	}
593 
594 	if (pc->od) {
595 		regmap_field_read(pc->od, &od_value);
596 		if (od_value & BIT(pin))
597 			ST_PINCONF_PACK_OD(*config);
598 	}
599 }
600 
601 static int st_pinconf_get_retime_packed(struct st_pinctrl *info,
602 	struct st_pio_control *pc,	int pin, unsigned long *config)
603 {
604 	const struct st_pctl_data *data = info->data;
605 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
606 	unsigned int delay_bits, delay, delay0, delay1, val;
607 	int output = ST_PINCONF_UNPACK_OE(*config);
608 
609 	if (!regmap_field_read(rt_p->retime, &val) && (val & BIT(pin)))
610 		ST_PINCONF_PACK_RT(*config);
611 
612 	if (!regmap_field_read(rt_p->clk1notclk0, &val) && (val & BIT(pin)))
613 		ST_PINCONF_PACK_RT_CLK(*config, 1);
614 
615 	if (!regmap_field_read(rt_p->clknotdata, &val) && (val & BIT(pin)))
616 		ST_PINCONF_PACK_RT_CLKNOTDATA(*config);
617 
618 	if (!regmap_field_read(rt_p->double_edge, &val) && (val & BIT(pin)))
619 		ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config);
620 
621 	if (!regmap_field_read(rt_p->invertclk, &val) && (val & BIT(pin)))
622 		ST_PINCONF_PACK_RT_INVERTCLK(*config);
623 
624 	regmap_field_read(rt_p->delay_0, &delay0);
625 	regmap_field_read(rt_p->delay_1, &delay1);
626 	delay_bits = (((delay1 & BIT(pin)) ? 1 : 0) << 1) |
627 			(((delay0 & BIT(pin)) ? 1 : 0));
628 	delay =  st_pinconf_bit_to_delay(delay_bits, data, output);
629 	ST_PINCONF_PACK_RT_DELAY(*config, delay);
630 
631 	return 0;
632 }
633 
634 static int st_pinconf_get_retime_dedicated(struct st_pinctrl *info,
635 	struct st_pio_control *pc,	int pin, unsigned long *config)
636 {
637 	unsigned int value;
638 	unsigned long delay_bits, delay, rt_clk;
639 	int output = ST_PINCONF_UNPACK_OE(*config);
640 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
641 
642 	regmap_field_read(rt_d->rt[pin], &value);
643 
644 	rt_clk = (value & RT_D_CFG_CLK_MASK) >> RT_D_CFG_CLK_SHIFT;
645 	ST_PINCONF_PACK_RT_CLK(*config, rt_clk);
646 
647 	delay_bits = (value & RT_D_CFG_DELAY_MASK) >> RT_D_CFG_DELAY_SHIFT;
648 	delay =  st_pinconf_bit_to_delay(delay_bits, info->data, output);
649 	ST_PINCONF_PACK_RT_DELAY(*config, delay);
650 
651 	if (value & RT_D_CFG_CLKNOTDATA_MASK)
652 		ST_PINCONF_PACK_RT_CLKNOTDATA(*config);
653 
654 	if (value & RT_D_CFG_DOUBLE_EDGE_MASK)
655 		ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config);
656 
657 	if (value & RT_D_CFG_INVERTCLK_MASK)
658 		ST_PINCONF_PACK_RT_INVERTCLK(*config);
659 
660 	if (value & RT_D_CFG_RETIME_MASK)
661 		ST_PINCONF_PACK_RT(*config);
662 
663 	return 0;
664 }
665 
666 /* GPIO related functions */
667 
668 static inline void __st_gpio_set(struct st_gpio_bank *bank,
669 	unsigned offset, int value)
670 {
671 	if (value)
672 		writel(BIT(offset), bank->base + REG_PIO_SET_POUT);
673 	else
674 		writel(BIT(offset), bank->base + REG_PIO_CLR_POUT);
675 }
676 
677 static void st_gpio_direction(struct st_gpio_bank *bank,
678 		unsigned int gpio, unsigned int direction)
679 {
680 	int offset = st_gpio_pin(gpio);
681 	int i = 0;
682 	/**
683 	 * There are three configuration registers (PIOn_PC0, PIOn_PC1
684 	 * and PIOn_PC2) for each port. These are used to configure the
685 	 * PIO port pins. Each pin can be configured as an input, output,
686 	 * bidirectional, or alternative function pin. Three bits, one bit
687 	 * from each of the three registers, configure the corresponding bit of
688 	 * the port. Valid bit settings is:
689 	 *
690 	 * PC2		PC1		PC0	Direction.
691 	 * 0		0		0	[Input Weak pull-up]
692 	 * 0		0 or 1		1	[Bidirection]
693 	 * 0		1		0	[Output]
694 	 * 1		0		0	[Input]
695 	 *
696 	 * PIOn_SET_PC and PIOn_CLR_PC registers are used to set and clear bits
697 	 * individually.
698 	 */
699 	for (i = 0; i <= 2; i++) {
700 		if (direction & BIT(i))
701 			writel(BIT(offset), bank->base + REG_PIO_SET_PC(i));
702 		else
703 			writel(BIT(offset), bank->base + REG_PIO_CLR_PC(i));
704 	}
705 }
706 
707 static int st_gpio_get(struct gpio_chip *chip, unsigned offset)
708 {
709 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
710 
711 	return !!(readl(bank->base + REG_PIO_PIN) & BIT(offset));
712 }
713 
714 static void st_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
715 {
716 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
717 	__st_gpio_set(bank, offset, value);
718 }
719 
720 static int st_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
721 {
722 	pinctrl_gpio_direction_input(chip->base + offset);
723 
724 	return 0;
725 }
726 
727 static int st_gpio_direction_output(struct gpio_chip *chip,
728 	unsigned offset, int value)
729 {
730 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
731 
732 	__st_gpio_set(bank, offset, value);
733 	pinctrl_gpio_direction_output(chip->base + offset);
734 
735 	return 0;
736 }
737 
738 static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
739 {
740 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
741 	struct st_pio_control pc = bank->pc;
742 	unsigned long config;
743 	unsigned int direction = 0;
744 	unsigned int function;
745 	unsigned int value;
746 	int i = 0;
747 
748 	/* Alternate function direction is handled by Pinctrl */
749 	function = st_pctl_get_pin_function(&pc, offset);
750 	if (function) {
751 		st_pinconf_get_direction(&pc, offset, &config);
752 		if (ST_PINCONF_UNPACK_OE(config))
753 			return GPIO_LINE_DIRECTION_OUT;
754 
755 		return GPIO_LINE_DIRECTION_IN;
756 	}
757 
758 	/*
759 	 * GPIO direction is handled differently
760 	 * - See st_gpio_direction() above for an explanation
761 	 */
762 	for (i = 0; i <= 2; i++) {
763 		value = readl(bank->base + REG_PIO_PC(i));
764 		direction |= ((value >> offset) & 0x1) << i;
765 	}
766 
767 	if (direction == ST_GPIO_DIRECTION_IN)
768 		return GPIO_LINE_DIRECTION_IN;
769 
770 	return GPIO_LINE_DIRECTION_OUT;
771 }
772 
773 /* Pinctrl Groups */
774 static int st_pctl_get_groups_count(struct pinctrl_dev *pctldev)
775 {
776 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
777 
778 	return info->ngroups;
779 }
780 
781 static const char *st_pctl_get_group_name(struct pinctrl_dev *pctldev,
782 				       unsigned selector)
783 {
784 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
785 
786 	return info->groups[selector].name;
787 }
788 
789 static int st_pctl_get_group_pins(struct pinctrl_dev *pctldev,
790 	unsigned selector, const unsigned **pins, unsigned *npins)
791 {
792 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
793 
794 	if (selector >= info->ngroups)
795 		return -EINVAL;
796 
797 	*pins = info->groups[selector].pins;
798 	*npins = info->groups[selector].npins;
799 
800 	return 0;
801 }
802 
803 static inline const struct st_pctl_group *st_pctl_find_group_by_name(
804 	const struct st_pinctrl *info, const char *name)
805 {
806 	int i;
807 
808 	for (i = 0; i < info->ngroups; i++) {
809 		if (!strcmp(info->groups[i].name, name))
810 			return &info->groups[i];
811 	}
812 
813 	return NULL;
814 }
815 
816 static int st_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
817 	struct device_node *np, struct pinctrl_map **map, unsigned *num_maps)
818 {
819 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
820 	const struct st_pctl_group *grp;
821 	struct device *dev = info->dev;
822 	struct pinctrl_map *new_map;
823 	struct device_node *parent;
824 	int map_num, i;
825 
826 	grp = st_pctl_find_group_by_name(info, np->name);
827 	if (!grp) {
828 		dev_err(dev, "unable to find group for node %pOFn\n", np);
829 		return -EINVAL;
830 	}
831 
832 	map_num = grp->npins + 1;
833 	new_map = devm_kcalloc(dev, map_num, sizeof(*new_map), GFP_KERNEL);
834 	if (!new_map)
835 		return -ENOMEM;
836 
837 	parent = of_get_parent(np);
838 	if (!parent) {
839 		devm_kfree(dev, new_map);
840 		return -EINVAL;
841 	}
842 
843 	*map = new_map;
844 	*num_maps = map_num;
845 	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
846 	new_map[0].data.mux.function = parent->name;
847 	new_map[0].data.mux.group = np->name;
848 	of_node_put(parent);
849 
850 	/* create config map per pin */
851 	new_map++;
852 	for (i = 0; i < grp->npins; i++) {
853 		new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
854 		new_map[i].data.configs.group_or_pin =
855 				pin_get_name(pctldev, grp->pins[i]);
856 		new_map[i].data.configs.configs = &grp->pin_conf[i].config;
857 		new_map[i].data.configs.num_configs = 1;
858 	}
859 	dev_info(dev, "maps: function %s group %s num %d\n",
860 		(*map)->data.mux.function, grp->name, map_num);
861 
862 	return 0;
863 }
864 
865 static void st_pctl_dt_free_map(struct pinctrl_dev *pctldev,
866 			struct pinctrl_map *map, unsigned num_maps)
867 {
868 }
869 
870 static const struct pinctrl_ops st_pctlops = {
871 	.get_groups_count	= st_pctl_get_groups_count,
872 	.get_group_pins		= st_pctl_get_group_pins,
873 	.get_group_name		= st_pctl_get_group_name,
874 	.dt_node_to_map		= st_pctl_dt_node_to_map,
875 	.dt_free_map		= st_pctl_dt_free_map,
876 };
877 
878 /* Pinmux */
879 static int st_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
880 {
881 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
882 
883 	return info->nfunctions;
884 }
885 
886 static const char *st_pmx_get_fname(struct pinctrl_dev *pctldev,
887 	unsigned selector)
888 {
889 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
890 
891 	return info->functions[selector].name;
892 }
893 
894 static int st_pmx_get_groups(struct pinctrl_dev *pctldev,
895 	unsigned selector, const char * const **grps, unsigned * const ngrps)
896 {
897 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
898 	*grps = info->functions[selector].groups;
899 	*ngrps = info->functions[selector].ngroups;
900 
901 	return 0;
902 }
903 
904 static int st_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned fselector,
905 			unsigned group)
906 {
907 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
908 	struct st_pinconf *conf = info->groups[group].pin_conf;
909 	struct st_pio_control *pc;
910 	int i;
911 
912 	for (i = 0; i < info->groups[group].npins; i++) {
913 		pc = st_get_pio_control(pctldev, conf[i].pin);
914 		st_pctl_set_function(pc, conf[i].pin, conf[i].altfunc);
915 	}
916 
917 	return 0;
918 }
919 
920 static int st_pmx_set_gpio_direction(struct pinctrl_dev *pctldev,
921 			struct pinctrl_gpio_range *range, unsigned gpio,
922 			bool input)
923 {
924 	struct st_gpio_bank *bank = gpio_range_to_bank(range);
925 	/*
926 	 * When a PIO bank is used in its primary function mode (altfunc = 0)
927 	 * Output Enable (OE), Open Drain(OD), and Pull Up (PU)
928 	 * for the primary PIO functions are driven by the related PIO block
929 	 */
930 	st_pctl_set_function(&bank->pc, gpio, 0);
931 	st_gpio_direction(bank, gpio, input ?
932 		ST_GPIO_DIRECTION_IN : ST_GPIO_DIRECTION_OUT);
933 
934 	return 0;
935 }
936 
937 static const struct pinmux_ops st_pmxops = {
938 	.get_functions_count	= st_pmx_get_funcs_count,
939 	.get_function_name	= st_pmx_get_fname,
940 	.get_function_groups	= st_pmx_get_groups,
941 	.set_mux		= st_pmx_set_mux,
942 	.gpio_set_direction	= st_pmx_set_gpio_direction,
943 	.strict			= true,
944 };
945 
946 /* Pinconf  */
947 static void st_pinconf_get_retime(struct st_pinctrl *info,
948 	struct st_pio_control *pc, int pin, unsigned long *config)
949 {
950 	if (info->data->rt_style == st_retime_style_packed)
951 		st_pinconf_get_retime_packed(info, pc, pin, config);
952 	else if (info->data->rt_style == st_retime_style_dedicated)
953 		if ((BIT(pin) & pc->rt_pin_mask))
954 			st_pinconf_get_retime_dedicated(info, pc,
955 					pin, config);
956 }
957 
958 static void st_pinconf_set_retime(struct st_pinctrl *info,
959 	struct st_pio_control *pc, int pin, unsigned long config)
960 {
961 	if (info->data->rt_style == st_retime_style_packed)
962 		st_pinconf_set_retime_packed(info, pc, config, pin);
963 	else if (info->data->rt_style == st_retime_style_dedicated)
964 		if ((BIT(pin) & pc->rt_pin_mask))
965 			st_pinconf_set_retime_dedicated(info, pc,
966 							config, pin);
967 }
968 
969 static int st_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin_id,
970 			unsigned long *configs, unsigned num_configs)
971 {
972 	int pin = st_gpio_pin(pin_id);
973 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
974 	struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id);
975 	int i;
976 
977 	for (i = 0; i < num_configs; i++) {
978 		st_pinconf_set_config(pc, pin, configs[i]);
979 		st_pinconf_set_retime(info, pc, pin, configs[i]);
980 	} /* for each config */
981 
982 	return 0;
983 }
984 
985 static int st_pinconf_get(struct pinctrl_dev *pctldev,
986 			     unsigned pin_id, unsigned long *config)
987 {
988 	int pin = st_gpio_pin(pin_id);
989 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
990 	struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id);
991 
992 	*config = 0;
993 	st_pinconf_get_direction(pc, pin, config);
994 	st_pinconf_get_retime(info, pc, pin, config);
995 
996 	return 0;
997 }
998 
999 static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
1000 				   struct seq_file *s, unsigned pin_id)
1001 {
1002 	struct st_pio_control *pc;
1003 	unsigned long config;
1004 	unsigned int function;
1005 	int offset = st_gpio_pin(pin_id);
1006 	char f[16];
1007 	int oe;
1008 
1009 	mutex_unlock(&pctldev->mutex);
1010 	pc = st_get_pio_control(pctldev, pin_id);
1011 	st_pinconf_get(pctldev, pin_id, &config);
1012 	mutex_lock(&pctldev->mutex);
1013 
1014 	function = st_pctl_get_pin_function(pc, offset);
1015 	if (function)
1016 		snprintf(f, 10, "Alt Fn %u", function);
1017 	else
1018 		snprintf(f, 5, "GPIO");
1019 
1020 	oe = st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset);
1021 	seq_printf(s, "[OE:%d,PU:%ld,OD:%ld]\t%s\n"
1022 		"\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
1023 		"de:%ld,rt-clk:%ld,rt-delay:%ld]",
1024 		(oe == GPIO_LINE_DIRECTION_OUT),
1025 		ST_PINCONF_UNPACK_PU(config),
1026 		ST_PINCONF_UNPACK_OD(config),
1027 		f,
1028 		ST_PINCONF_UNPACK_RT(config),
1029 		ST_PINCONF_UNPACK_RT_INVERTCLK(config),
1030 		ST_PINCONF_UNPACK_RT_CLKNOTDATA(config),
1031 		ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config),
1032 		ST_PINCONF_UNPACK_RT_CLK(config),
1033 		ST_PINCONF_UNPACK_RT_DELAY(config));
1034 }
1035 
1036 static const struct pinconf_ops st_confops = {
1037 	.pin_config_get		= st_pinconf_get,
1038 	.pin_config_set		= st_pinconf_set,
1039 	.pin_config_dbg_show	= st_pinconf_dbg_show,
1040 };
1041 
1042 static void st_pctl_dt_child_count(struct st_pinctrl *info,
1043 				     struct device_node *np)
1044 {
1045 	struct device_node *child;
1046 	for_each_child_of_node(np, child) {
1047 		if (of_property_read_bool(child, "gpio-controller")) {
1048 			info->nbanks++;
1049 		} else {
1050 			info->nfunctions++;
1051 			info->ngroups += of_get_child_count(child);
1052 		}
1053 	}
1054 }
1055 
1056 static int st_pctl_dt_setup_retime_packed(struct st_pinctrl *info,
1057 	int bank, struct st_pio_control *pc)
1058 {
1059 	struct device *dev = info->dev;
1060 	struct regmap *rm = info->regmap;
1061 	const struct st_pctl_data *data = info->data;
1062 	/* 2 registers per bank */
1063 	int reg = (data->rt + bank * RT_P_CFGS_PER_BANK) * 4;
1064 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
1065 	/* cfg0 */
1066 	struct reg_field clk1notclk0 = RT_P_CFG0_CLK1NOTCLK0_FIELD(reg);
1067 	struct reg_field delay_0 = RT_P_CFG0_DELAY_0_FIELD(reg);
1068 	struct reg_field delay_1 = RT_P_CFG0_DELAY_1_FIELD(reg);
1069 	/* cfg1 */
1070 	struct reg_field invertclk = RT_P_CFG1_INVERTCLK_FIELD(reg + 4);
1071 	struct reg_field retime = RT_P_CFG1_RETIME_FIELD(reg + 4);
1072 	struct reg_field clknotdata = RT_P_CFG1_CLKNOTDATA_FIELD(reg + 4);
1073 	struct reg_field double_edge = RT_P_CFG1_DOUBLE_EDGE_FIELD(reg + 4);
1074 
1075 	rt_p->clk1notclk0 = devm_regmap_field_alloc(dev, rm, clk1notclk0);
1076 	rt_p->delay_0	= devm_regmap_field_alloc(dev, rm, delay_0);
1077 	rt_p->delay_1 = devm_regmap_field_alloc(dev, rm, delay_1);
1078 	rt_p->invertclk = devm_regmap_field_alloc(dev, rm, invertclk);
1079 	rt_p->retime = devm_regmap_field_alloc(dev, rm, retime);
1080 	rt_p->clknotdata = devm_regmap_field_alloc(dev, rm, clknotdata);
1081 	rt_p->double_edge = devm_regmap_field_alloc(dev, rm, double_edge);
1082 
1083 	if (IS_ERR(rt_p->clk1notclk0) || IS_ERR(rt_p->delay_0) ||
1084 		 IS_ERR(rt_p->delay_1) || IS_ERR(rt_p->invertclk) ||
1085 		 IS_ERR(rt_p->retime) || IS_ERR(rt_p->clknotdata) ||
1086 		 IS_ERR(rt_p->double_edge))
1087 		return -EINVAL;
1088 
1089 	return 0;
1090 }
1091 
1092 static int st_pctl_dt_setup_retime_dedicated(struct st_pinctrl *info,
1093 	int bank, struct st_pio_control *pc)
1094 {
1095 	struct device *dev = info->dev;
1096 	struct regmap *rm = info->regmap;
1097 	const struct st_pctl_data *data = info->data;
1098 	/* 8 registers per bank */
1099 	int reg_offset = (data->rt + bank * RT_D_CFGS_PER_BANK) * 4;
1100 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
1101 	unsigned int j;
1102 	u32 pin_mask = pc->rt_pin_mask;
1103 
1104 	for (j = 0; j < RT_D_CFGS_PER_BANK; j++) {
1105 		if (BIT(j) & pin_mask) {
1106 			struct reg_field reg = REG_FIELD(reg_offset, 0, 31);
1107 			rt_d->rt[j] = devm_regmap_field_alloc(dev, rm, reg);
1108 			if (IS_ERR(rt_d->rt[j]))
1109 				return -EINVAL;
1110 			reg_offset += 4;
1111 		}
1112 	}
1113 	return 0;
1114 }
1115 
1116 static int st_pctl_dt_setup_retime(struct st_pinctrl *info,
1117 	int bank, struct st_pio_control *pc)
1118 {
1119 	const struct st_pctl_data *data = info->data;
1120 	if (data->rt_style  == st_retime_style_packed)
1121 		return st_pctl_dt_setup_retime_packed(info, bank, pc);
1122 	else if (data->rt_style == st_retime_style_dedicated)
1123 		return st_pctl_dt_setup_retime_dedicated(info, bank, pc);
1124 
1125 	return -EINVAL;
1126 }
1127 
1128 
1129 static struct regmap_field *st_pc_get_value(struct device *dev,
1130 					    struct regmap *regmap, int bank,
1131 					    int data, int lsb, int msb)
1132 {
1133 	struct reg_field reg = REG_FIELD((data + bank) * 4, lsb, msb);
1134 
1135 	if (data < 0)
1136 		return NULL;
1137 
1138 	return devm_regmap_field_alloc(dev, regmap, reg);
1139 }
1140 
1141 static void st_parse_syscfgs(struct st_pinctrl *info, int bank,
1142 			     struct device_node *np)
1143 {
1144 	const struct st_pctl_data *data = info->data;
1145 	/**
1146 	 * For a given shared register like OE/PU/OD, there are 8 bits per bank
1147 	 * 0:7 belongs to bank0, 8:15 belongs to bank1 ...
1148 	 * So each register is shared across 4 banks.
1149 	 */
1150 	int lsb = (bank%4) * ST_GPIO_PINS_PER_BANK;
1151 	int msb = lsb + ST_GPIO_PINS_PER_BANK - 1;
1152 	struct st_pio_control *pc = &info->banks[bank].pc;
1153 	struct device *dev = info->dev;
1154 	struct regmap *regmap  = info->regmap;
1155 
1156 	pc->alt = st_pc_get_value(dev, regmap, bank, data->alt, 0, 31);
1157 	pc->oe = st_pc_get_value(dev, regmap, bank/4, data->oe, lsb, msb);
1158 	pc->pu = st_pc_get_value(dev, regmap, bank/4, data->pu, lsb, msb);
1159 	pc->od = st_pc_get_value(dev, regmap, bank/4, data->od, lsb, msb);
1160 
1161 	/* retime avaiable for all pins by default */
1162 	pc->rt_pin_mask = 0xff;
1163 	of_property_read_u32(np, "st,retime-pin-mask", &pc->rt_pin_mask);
1164 	st_pctl_dt_setup_retime(info, bank, pc);
1165 
1166 	return;
1167 }
1168 
1169 static int st_pctl_dt_calculate_pin(struct st_pinctrl *info,
1170 				    phandle bank, unsigned int offset)
1171 {
1172 	struct device_node *np;
1173 	struct gpio_chip *chip;
1174 	int retval = -EINVAL;
1175 	int i;
1176 
1177 	np = of_find_node_by_phandle(bank);
1178 	if (!np)
1179 		return -EINVAL;
1180 
1181 	for (i = 0; i < info->nbanks; i++) {
1182 		chip = &info->banks[i].gpio_chip;
1183 		if (chip->fwnode == of_fwnode_handle(np)) {
1184 			if (offset < chip->ngpio)
1185 				retval = chip->base + offset;
1186 			break;
1187 		}
1188 	}
1189 
1190 	of_node_put(np);
1191 	return retval;
1192 }
1193 
1194 /*
1195  * Each pin is represented in of the below forms.
1196  * <bank offset mux direction rt_type rt_delay rt_clk>
1197  */
1198 static int st_pctl_dt_parse_groups(struct device_node *np,
1199 	struct st_pctl_group *grp, struct st_pinctrl *info, int idx)
1200 {
1201 	/* bank pad direction val altfunction */
1202 	const __be32 *list;
1203 	struct property *pp;
1204 	struct device *dev = info->dev;
1205 	struct st_pinconf *conf;
1206 	struct device_node *pins;
1207 	phandle bank;
1208 	unsigned int offset;
1209 	int i = 0, npins = 0, nr_props, ret = 0;
1210 
1211 	pins = of_get_child_by_name(np, "st,pins");
1212 	if (!pins)
1213 		return -ENODATA;
1214 
1215 	for_each_property_of_node(pins, pp) {
1216 		/* Skip those we do not want to proceed */
1217 		if (!strcmp(pp->name, "name"))
1218 			continue;
1219 
1220 		if (pp->length / sizeof(__be32) >= OF_GPIO_ARGS_MIN) {
1221 			npins++;
1222 		} else {
1223 			pr_warn("Invalid st,pins in %pOFn node\n", np);
1224 			ret = -EINVAL;
1225 			goto out_put_node;
1226 		}
1227 	}
1228 
1229 	grp->npins = npins;
1230 	grp->name = np->name;
1231 	grp->pins = devm_kcalloc(dev, npins, sizeof(*grp->pins), GFP_KERNEL);
1232 	grp->pin_conf = devm_kcalloc(dev, npins, sizeof(*grp->pin_conf), GFP_KERNEL);
1233 
1234 	if (!grp->pins || !grp->pin_conf) {
1235 		ret = -ENOMEM;
1236 		goto out_put_node;
1237 	}
1238 
1239 	/* <bank offset mux direction rt_type rt_delay rt_clk> */
1240 	for_each_property_of_node(pins, pp) {
1241 		if (!strcmp(pp->name, "name"))
1242 			continue;
1243 		nr_props = pp->length/sizeof(u32);
1244 		list = pp->value;
1245 		conf = &grp->pin_conf[i];
1246 
1247 		/* bank & offset */
1248 		bank = be32_to_cpup(list++);
1249 		offset = be32_to_cpup(list++);
1250 		conf->pin = st_pctl_dt_calculate_pin(info, bank, offset);
1251 		conf->name = pp->name;
1252 		grp->pins[i] = conf->pin;
1253 		/* mux */
1254 		conf->altfunc = be32_to_cpup(list++);
1255 		conf->config = 0;
1256 		/* direction */
1257 		conf->config |= be32_to_cpup(list++);
1258 		/* rt_type rt_delay rt_clk */
1259 		if (nr_props >= OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN) {
1260 			/* rt_type */
1261 			conf->config |= be32_to_cpup(list++);
1262 			/* rt_delay */
1263 			conf->config |= be32_to_cpup(list++);
1264 			/* rt_clk */
1265 			if (nr_props > OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN)
1266 				conf->config |= be32_to_cpup(list++);
1267 		}
1268 		i++;
1269 	}
1270 
1271 out_put_node:
1272 	of_node_put(pins);
1273 
1274 	return ret;
1275 }
1276 
1277 static int st_pctl_parse_functions(struct device_node *np,
1278 			struct st_pinctrl *info, u32 index, int *grp_index)
1279 {
1280 	struct device *dev = info->dev;
1281 	struct device_node *child;
1282 	struct st_pmx_func *func;
1283 	struct st_pctl_group *grp;
1284 	int ret, i;
1285 
1286 	func = &info->functions[index];
1287 	func->name = np->name;
1288 	func->ngroups = of_get_child_count(np);
1289 	if (func->ngroups == 0)
1290 		return dev_err_probe(dev, -EINVAL, "No groups defined\n");
1291 	func->groups = devm_kcalloc(dev, func->ngroups, sizeof(*func->groups), GFP_KERNEL);
1292 	if (!func->groups)
1293 		return -ENOMEM;
1294 
1295 	i = 0;
1296 	for_each_child_of_node(np, child) {
1297 		func->groups[i] = child->name;
1298 		grp = &info->groups[*grp_index];
1299 		*grp_index += 1;
1300 		ret = st_pctl_dt_parse_groups(child, grp, info, i++);
1301 		if (ret) {
1302 			of_node_put(child);
1303 			return ret;
1304 		}
1305 	}
1306 	dev_info(dev, "Function[%d\t name:%s,\tgroups:%d]\n", index, func->name, func->ngroups);
1307 
1308 	return 0;
1309 }
1310 
1311 static void st_gpio_irq_mask(struct irq_data *d)
1312 {
1313 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1314 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1315 
1316 	writel(BIT(d->hwirq), bank->base + REG_PIO_CLR_PMASK);
1317 }
1318 
1319 static void st_gpio_irq_unmask(struct irq_data *d)
1320 {
1321 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1322 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1323 
1324 	writel(BIT(d->hwirq), bank->base + REG_PIO_SET_PMASK);
1325 }
1326 
1327 static int st_gpio_irq_request_resources(struct irq_data *d)
1328 {
1329 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1330 
1331 	st_gpio_direction_input(gc, d->hwirq);
1332 
1333 	return gpiochip_lock_as_irq(gc, d->hwirq);
1334 }
1335 
1336 static void st_gpio_irq_release_resources(struct irq_data *d)
1337 {
1338 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1339 
1340 	gpiochip_unlock_as_irq(gc, d->hwirq);
1341 }
1342 
1343 static int st_gpio_irq_set_type(struct irq_data *d, unsigned type)
1344 {
1345 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1346 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1347 	unsigned long flags;
1348 	int comp, pin = d->hwirq;
1349 	u32 val;
1350 	u32 pin_edge_conf = 0;
1351 
1352 	switch (type) {
1353 	case IRQ_TYPE_LEVEL_HIGH:
1354 		comp = 0;
1355 		break;
1356 	case IRQ_TYPE_EDGE_FALLING:
1357 		comp = 0;
1358 		pin_edge_conf = ST_IRQ_FALLING_EDGE_CONF(pin);
1359 		break;
1360 	case IRQ_TYPE_LEVEL_LOW:
1361 		comp = 1;
1362 		break;
1363 	case IRQ_TYPE_EDGE_RISING:
1364 		comp = 1;
1365 		pin_edge_conf = ST_IRQ_RISING_EDGE_CONF(pin);
1366 		break;
1367 	case IRQ_TYPE_EDGE_BOTH:
1368 		comp = st_gpio_get(&bank->gpio_chip, pin);
1369 		pin_edge_conf = ST_IRQ_BOTH_EDGE_CONF(pin);
1370 		break;
1371 	default:
1372 		return -EINVAL;
1373 	}
1374 
1375 	spin_lock_irqsave(&bank->lock, flags);
1376 	bank->irq_edge_conf &=  ~(ST_IRQ_EDGE_MASK << (
1377 				pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN));
1378 	bank->irq_edge_conf |= pin_edge_conf;
1379 	spin_unlock_irqrestore(&bank->lock, flags);
1380 
1381 	val = readl(bank->base + REG_PIO_PCOMP);
1382 	val &= ~BIT(pin);
1383 	val |= (comp << pin);
1384 	writel(val, bank->base + REG_PIO_PCOMP);
1385 
1386 	return 0;
1387 }
1388 
1389 /*
1390  * As edge triggers are not supported at hardware level, it is supported by
1391  * software by exploiting the level trigger support in hardware.
1392  *
1393  * Steps for detection raising edge interrupt in software.
1394  *
1395  * Step 1: CONFIGURE pin to detect level LOW interrupts.
1396  *
1397  * Step 2: DETECT level LOW interrupt and in irqmux/gpio bank interrupt handler,
1398  * if the value of pin is low, then CONFIGURE pin for level HIGH interrupt.
1399  * IGNORE calling the actual interrupt handler for the pin at this stage.
1400  *
1401  * Step 3: DETECT level HIGH interrupt and in irqmux/gpio-bank interrupt handler
1402  * if the value of pin is HIGH, CONFIGURE pin for level LOW interrupt and then
1403  * DISPATCH the interrupt to the interrupt handler of the pin.
1404  *
1405  *		 step-1  ________     __________
1406  *				|     | step - 3
1407  *			        |     |
1408  *			step -2 |_____|
1409  *
1410  * falling edge is also detected int the same way.
1411  *
1412  */
1413 static void __gpio_irq_handler(struct st_gpio_bank *bank)
1414 {
1415 	unsigned long port_in, port_mask, port_comp, active_irqs;
1416 	unsigned long bank_edge_mask, flags;
1417 	int n, val, ecfg;
1418 
1419 	spin_lock_irqsave(&bank->lock, flags);
1420 	bank_edge_mask = bank->irq_edge_conf;
1421 	spin_unlock_irqrestore(&bank->lock, flags);
1422 
1423 	for (;;) {
1424 		port_in = readl(bank->base + REG_PIO_PIN);
1425 		port_comp = readl(bank->base + REG_PIO_PCOMP);
1426 		port_mask = readl(bank->base + REG_PIO_PMASK);
1427 
1428 		active_irqs = (port_in ^ port_comp) & port_mask;
1429 
1430 		if (active_irqs == 0)
1431 			break;
1432 
1433 		for_each_set_bit(n, &active_irqs, BITS_PER_LONG) {
1434 			/* check if we are detecting fake edges ... */
1435 			ecfg = ST_IRQ_EDGE_CONF(bank_edge_mask, n);
1436 
1437 			if (ecfg) {
1438 				/* edge detection. */
1439 				val = st_gpio_get(&bank->gpio_chip, n);
1440 
1441 				writel(BIT(n),
1442 					val ? bank->base + REG_PIO_SET_PCOMP :
1443 					bank->base + REG_PIO_CLR_PCOMP);
1444 
1445 				if (ecfg != ST_IRQ_EDGE_BOTH &&
1446 					!((ecfg & ST_IRQ_EDGE_FALLING) ^ val))
1447 					continue;
1448 			}
1449 
1450 			generic_handle_domain_irq(bank->gpio_chip.irq.domain, n);
1451 		}
1452 	}
1453 }
1454 
1455 static void st_gpio_irq_handler(struct irq_desc *desc)
1456 {
1457 	/* interrupt dedicated per bank */
1458 	struct irq_chip *chip = irq_desc_get_chip(desc);
1459 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
1460 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1461 
1462 	chained_irq_enter(chip, desc);
1463 	__gpio_irq_handler(bank);
1464 	chained_irq_exit(chip, desc);
1465 }
1466 
1467 static void st_gpio_irqmux_handler(struct irq_desc *desc)
1468 {
1469 	struct irq_chip *chip = irq_desc_get_chip(desc);
1470 	struct st_pinctrl *info = irq_desc_get_handler_data(desc);
1471 	unsigned long status;
1472 	int n;
1473 
1474 	chained_irq_enter(chip, desc);
1475 
1476 	status = readl(info->irqmux_base);
1477 
1478 	for_each_set_bit(n, &status, info->nbanks)
1479 		__gpio_irq_handler(&info->banks[n]);
1480 
1481 	chained_irq_exit(chip, desc);
1482 }
1483 
1484 static const struct gpio_chip st_gpio_template = {
1485 	.request		= gpiochip_generic_request,
1486 	.free			= gpiochip_generic_free,
1487 	.get			= st_gpio_get,
1488 	.set			= st_gpio_set,
1489 	.direction_input	= st_gpio_direction_input,
1490 	.direction_output	= st_gpio_direction_output,
1491 	.get_direction		= st_gpio_get_direction,
1492 	.ngpio			= ST_GPIO_PINS_PER_BANK,
1493 };
1494 
1495 static struct irq_chip st_gpio_irqchip = {
1496 	.name			= "GPIO",
1497 	.irq_request_resources	= st_gpio_irq_request_resources,
1498 	.irq_release_resources	= st_gpio_irq_release_resources,
1499 	.irq_disable		= st_gpio_irq_mask,
1500 	.irq_mask		= st_gpio_irq_mask,
1501 	.irq_unmask		= st_gpio_irq_unmask,
1502 	.irq_set_type		= st_gpio_irq_set_type,
1503 	.flags			= IRQCHIP_SKIP_SET_WAKE,
1504 };
1505 
1506 static int st_gpiolib_register_bank(struct st_pinctrl *info,
1507 	int bank_nr, struct device_node *np)
1508 {
1509 	struct st_gpio_bank *bank = &info->banks[bank_nr];
1510 	struct pinctrl_gpio_range *range = &bank->range;
1511 	struct device *dev = info->dev;
1512 	int bank_num = of_alias_get_id(np, "gpio");
1513 	struct resource res, irq_res;
1514 	int err;
1515 
1516 	if (of_address_to_resource(np, 0, &res))
1517 		return -ENODEV;
1518 
1519 	bank->base = devm_ioremap_resource(dev, &res);
1520 	if (IS_ERR(bank->base))
1521 		return PTR_ERR(bank->base);
1522 
1523 	bank->gpio_chip = st_gpio_template;
1524 	bank->gpio_chip.base = bank_num * ST_GPIO_PINS_PER_BANK;
1525 	bank->gpio_chip.ngpio = ST_GPIO_PINS_PER_BANK;
1526 	bank->gpio_chip.fwnode = of_fwnode_handle(np);
1527 	bank->gpio_chip.parent = dev;
1528 	spin_lock_init(&bank->lock);
1529 
1530 	of_property_read_string(np, "st,bank-name", &range->name);
1531 	bank->gpio_chip.label = range->name;
1532 
1533 	range->id = bank_num;
1534 	range->pin_base = range->base = range->id * ST_GPIO_PINS_PER_BANK;
1535 	range->npins = bank->gpio_chip.ngpio;
1536 	range->gc = &bank->gpio_chip;
1537 
1538 	/**
1539 	 * GPIO bank can have one of the two possible types of
1540 	 * interrupt-wirings.
1541 	 *
1542 	 * First type is via irqmux, single interrupt is used by multiple
1543 	 * gpio banks. This reduces number of overall interrupts numbers
1544 	 * required. All these banks belong to a single pincontroller.
1545 	 *		  _________
1546 	 *		 |	   |----> [gpio-bank (n)    ]
1547 	 *		 |	   |----> [gpio-bank (n + 1)]
1548 	 *	[irqN]-- | irq-mux |----> [gpio-bank (n + 2)]
1549 	 *		 |	   |----> [gpio-bank (...  )]
1550 	 *		 |_________|----> [gpio-bank (n + 7)]
1551 	 *
1552 	 * Second type has a dedicated interrupt per each gpio bank.
1553 	 *
1554 	 *	[irqN]----> [gpio-bank (n)]
1555 	 */
1556 
1557 	if (of_irq_to_resource(np, 0, &irq_res) > 0) {
1558 		struct gpio_irq_chip *girq;
1559 		int gpio_irq = irq_res.start;
1560 
1561 		/* This is not a valid IRQ */
1562 		if (gpio_irq <= 0) {
1563 			dev_err(dev, "invalid IRQ for %pOF bank\n", np);
1564 			goto skip_irq;
1565 		}
1566 		/* We need to have a mux as well */
1567 		if (!info->irqmux_base) {
1568 			dev_err(dev, "no irqmux for %pOF bank\n", np);
1569 			goto skip_irq;
1570 		}
1571 
1572 		girq = &bank->gpio_chip.irq;
1573 		girq->chip = &st_gpio_irqchip;
1574 		girq->parent_handler = st_gpio_irq_handler;
1575 		girq->num_parents = 1;
1576 		girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
1577 					     GFP_KERNEL);
1578 		if (!girq->parents)
1579 			return -ENOMEM;
1580 		girq->parents[0] = gpio_irq;
1581 		girq->default_type = IRQ_TYPE_NONE;
1582 		girq->handler = handle_simple_irq;
1583 	}
1584 
1585 skip_irq:
1586 	err  = gpiochip_add_data(&bank->gpio_chip, bank);
1587 	if (err)
1588 		return dev_err_probe(dev, err, "Failed to add gpiochip(%d)!\n", bank_num);
1589 	dev_info(dev, "%s bank added.\n", range->name);
1590 
1591 	return 0;
1592 }
1593 
1594 static const struct of_device_id st_pctl_of_match[] = {
1595 	{ .compatible = "st,stih407-sbc-pinctrl", .data = &stih407_data},
1596 	{ .compatible = "st,stih407-front-pinctrl", .data = &stih407_data},
1597 	{ .compatible = "st,stih407-rear-pinctrl", .data = &stih407_data},
1598 	{ .compatible = "st,stih407-flash-pinctrl", .data = &stih407_flashdata},
1599 	{ /* sentinel */ }
1600 };
1601 
1602 static int st_pctl_probe_dt(struct platform_device *pdev,
1603 	struct pinctrl_desc *pctl_desc, struct st_pinctrl *info)
1604 {
1605 	struct device *dev = &pdev->dev;
1606 	int ret = 0;
1607 	int i = 0, j = 0, k = 0, bank;
1608 	struct pinctrl_pin_desc *pdesc;
1609 	struct device_node *np = dev->of_node;
1610 	struct device_node *child;
1611 	int grp_index = 0;
1612 	int irq = 0;
1613 
1614 	st_pctl_dt_child_count(info, np);
1615 	if (!info->nbanks)
1616 		return dev_err_probe(dev, -EINVAL, "you need at least one gpio bank\n");
1617 
1618 	dev_info(dev, "nbanks = %d\n", info->nbanks);
1619 	dev_info(dev, "nfunctions = %d\n", info->nfunctions);
1620 	dev_info(dev, "ngroups = %d\n", info->ngroups);
1621 
1622 	info->functions = devm_kcalloc(dev, info->nfunctions, sizeof(*info->functions), GFP_KERNEL);
1623 
1624 	info->groups = devm_kcalloc(dev, info->ngroups, sizeof(*info->groups), GFP_KERNEL);
1625 
1626 	info->banks = devm_kcalloc(dev, info->nbanks, sizeof(*info->banks), GFP_KERNEL);
1627 
1628 	if (!info->functions || !info->groups || !info->banks)
1629 		return -ENOMEM;
1630 
1631 	info->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
1632 	if (IS_ERR(info->regmap))
1633 		return dev_err_probe(dev, PTR_ERR(info->regmap), "No syscfg phandle specified\n");
1634 	info->data = of_match_node(st_pctl_of_match, np)->data;
1635 
1636 	irq = platform_get_irq(pdev, 0);
1637 
1638 	if (irq > 0) {
1639 		info->irqmux_base = devm_platform_ioremap_resource_byname(pdev, "irqmux");
1640 		if (IS_ERR(info->irqmux_base))
1641 			return PTR_ERR(info->irqmux_base);
1642 
1643 		irq_set_chained_handler_and_data(irq, st_gpio_irqmux_handler,
1644 						 info);
1645 	}
1646 
1647 	pctl_desc->npins = info->nbanks * ST_GPIO_PINS_PER_BANK;
1648 	pdesc =	devm_kcalloc(dev, pctl_desc->npins, sizeof(*pdesc), GFP_KERNEL);
1649 	if (!pdesc)
1650 		return -ENOMEM;
1651 
1652 	pctl_desc->pins = pdesc;
1653 
1654 	bank = 0;
1655 	for_each_child_of_node(np, child) {
1656 		if (of_property_read_bool(child, "gpio-controller")) {
1657 			const char *bank_name = NULL;
1658 			char **pin_names;
1659 
1660 			ret = st_gpiolib_register_bank(info, bank, child);
1661 			if (ret) {
1662 				of_node_put(child);
1663 				return ret;
1664 			}
1665 
1666 			k = info->banks[bank].range.pin_base;
1667 			bank_name = info->banks[bank].range.name;
1668 
1669 			pin_names = devm_kasprintf_strarray(dev, bank_name, ST_GPIO_PINS_PER_BANK);
1670 			if (IS_ERR(pin_names)) {
1671 				of_node_put(child);
1672 				return PTR_ERR(pin_names);
1673 			}
1674 
1675 			for (j = 0; j < ST_GPIO_PINS_PER_BANK; j++, k++) {
1676 				pdesc->number = k;
1677 				pdesc->name = pin_names[j];
1678 				pdesc++;
1679 			}
1680 			st_parse_syscfgs(info, bank, child);
1681 			bank++;
1682 		} else {
1683 			ret = st_pctl_parse_functions(child, info,
1684 							i++, &grp_index);
1685 			if (ret) {
1686 				dev_err(dev, "No functions found.\n");
1687 				of_node_put(child);
1688 				return ret;
1689 			}
1690 		}
1691 	}
1692 
1693 	return 0;
1694 }
1695 
1696 static int st_pctl_probe(struct platform_device *pdev)
1697 {
1698 	struct device *dev = &pdev->dev;
1699 	struct st_pinctrl *info;
1700 	struct pinctrl_desc *pctl_desc;
1701 	int ret, i;
1702 
1703 	if (!dev->of_node) {
1704 		dev_err(dev, "device node not found.\n");
1705 		return -EINVAL;
1706 	}
1707 
1708 	pctl_desc = devm_kzalloc(dev, sizeof(*pctl_desc), GFP_KERNEL);
1709 	if (!pctl_desc)
1710 		return -ENOMEM;
1711 
1712 	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
1713 	if (!info)
1714 		return -ENOMEM;
1715 
1716 	info->dev = dev;
1717 	platform_set_drvdata(pdev, info);
1718 	ret = st_pctl_probe_dt(pdev, pctl_desc, info);
1719 	if (ret)
1720 		return ret;
1721 
1722 	pctl_desc->owner	= THIS_MODULE;
1723 	pctl_desc->pctlops	= &st_pctlops;
1724 	pctl_desc->pmxops	= &st_pmxops;
1725 	pctl_desc->confops	= &st_confops;
1726 	pctl_desc->name		= dev_name(dev);
1727 
1728 	info->pctl = devm_pinctrl_register(dev, pctl_desc, info);
1729 	if (IS_ERR(info->pctl))
1730 		return dev_err_probe(dev, PTR_ERR(info->pctl), "Failed pinctrl registration\n");
1731 
1732 	for (i = 0; i < info->nbanks; i++)
1733 		pinctrl_add_gpio_range(info->pctl, &info->banks[i].range);
1734 
1735 	return 0;
1736 }
1737 
1738 static struct platform_driver st_pctl_driver = {
1739 	.driver = {
1740 		.name = "st-pinctrl",
1741 		.of_match_table = st_pctl_of_match,
1742 	},
1743 	.probe = st_pctl_probe,
1744 };
1745 
1746 static int __init st_pctl_init(void)
1747 {
1748 	return platform_driver_register(&st_pctl_driver);
1749 }
1750 arch_initcall(st_pctl_init);
1751