1 /*
2  * Pinctrl driver for NXP LPC18xx/LPC43xx System Control Unit (SCU)
3  *
4  * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
5  *
6  * This file is licensed under the terms of the GNU General Public
7  * License version 2. This program is licensed "as is" without any
8  * warranty of any kind, whether express or implied.
9  */
10 
11 #include <linux/bitops.h>
12 #include <linux/clk.h>
13 #include <linux/init.h>
14 #include <linux/io.h>
15 #include <linux/of.h>
16 #include <linux/of_device.h>
17 
18 #include <linux/pinctrl/pinconf-generic.h>
19 #include <linux/pinctrl/pinconf.h>
20 #include <linux/pinctrl/pinctrl.h>
21 #include <linux/pinctrl/pinmux.h>
22 
23 #include "core.h"
24 #include "pinctrl-utils.h"
25 
26 /* LPC18XX SCU analog function registers */
27 #define LPC18XX_SCU_REG_ENAIO0		0xc88
28 #define LPC18XX_SCU_REG_ENAIO1		0xc8c
29 #define LPC18XX_SCU_REG_ENAIO2		0xc90
30 #define LPC18XX_SCU_REG_ENAIO2_DAC	BIT(0)
31 
32 /* LPC18XX SCU pin register definitions */
33 #define LPC18XX_SCU_PIN_MODE_MASK	0x7
34 #define LPC18XX_SCU_PIN_EPD		BIT(3)
35 #define LPC18XX_SCU_PIN_EPUN		BIT(4)
36 #define LPC18XX_SCU_PIN_EHS		BIT(5)
37 #define LPC18XX_SCU_PIN_EZI		BIT(6)
38 #define LPC18XX_SCU_PIN_ZIF		BIT(7)
39 #define LPC18XX_SCU_PIN_EHD_MASK	0x300
40 #define LPC18XX_SCU_PIN_EHD_POS		8
41 
42 #define LPC18XX_SCU_USB1_EPD		BIT(2)
43 #define LPC18XX_SCU_USB1_EPWR		BIT(4)
44 
45 #define LPC18XX_SCU_I2C0_EFP		BIT(0)
46 #define LPC18XX_SCU_I2C0_EHD		BIT(2)
47 #define LPC18XX_SCU_I2C0_EZI		BIT(3)
48 #define LPC18XX_SCU_I2C0_ZIF		BIT(7)
49 #define LPC18XX_SCU_I2C0_SCL_SHIFT	0
50 #define LPC18XX_SCU_I2C0_SDA_SHIFT	8
51 
52 #define LPC18XX_SCU_FUNC_PER_PIN	8
53 
54 /* LPC18XX SCU pin interrupt select registers */
55 #define LPC18XX_SCU_PINTSEL0		0xe00
56 #define LPC18XX_SCU_PINTSEL1		0xe04
57 #define LPC18XX_SCU_PINTSEL_VAL_MASK	0xff
58 #define LPC18XX_SCU_PINTSEL_PORT_SHIFT	5
59 #define LPC18XX_SCU_IRQ_PER_PINTSEL	4
60 #define LPC18XX_GPIO_PINS_PER_PORT	32
61 #define LPC18XX_GPIO_PIN_INT_MAX	8
62 
63 #define LPC18XX_SCU_PINTSEL_VAL(val, n) \
64 	((val) << (((n) % LPC18XX_SCU_IRQ_PER_PINTSEL) * 8))
65 
66 /* LPC18xx pin types */
67 enum {
68 	TYPE_ND,	/* Normal-drive */
69 	TYPE_HD,	/* High-drive */
70 	TYPE_HS,	/* High-speed */
71 	TYPE_I2C0,
72 	TYPE_USB1,
73 };
74 
75 /* LPC18xx pin functions */
76 enum {
77 	FUNC_R,		/* Reserved */
78 	FUNC_ADC,
79 	FUNC_ADCTRIG,
80 	FUNC_CAN0,
81 	FUNC_CAN1,
82 	FUNC_CGU_OUT,
83 	FUNC_CLKIN,
84 	FUNC_CLKOUT,
85 	FUNC_CTIN,
86 	FUNC_CTOUT,
87 	FUNC_DAC,
88 	FUNC_EMC,
89 	FUNC_EMC_ALT,
90 	FUNC_ENET,
91 	FUNC_ENET_ALT,
92 	FUNC_GPIO,
93 	FUNC_I2C0,
94 	FUNC_I2C1,
95 	FUNC_I2S0_RX_MCLK,
96 	FUNC_I2S0_RX_SCK,
97 	FUNC_I2S0_RX_SDA,
98 	FUNC_I2S0_RX_WS,
99 	FUNC_I2S0_TX_MCLK,
100 	FUNC_I2S0_TX_SCK,
101 	FUNC_I2S0_TX_SDA,
102 	FUNC_I2S0_TX_WS,
103 	FUNC_I2S1,
104 	FUNC_LCD,
105 	FUNC_LCD_ALT,
106 	FUNC_MCTRL,
107 	FUNC_NMI,
108 	FUNC_QEI,
109 	FUNC_SDMMC,
110 	FUNC_SGPIO,
111 	FUNC_SPI,
112 	FUNC_SPIFI,
113 	FUNC_SSP0,
114 	FUNC_SSP0_ALT,
115 	FUNC_SSP1,
116 	FUNC_TIMER0,
117 	FUNC_TIMER1,
118 	FUNC_TIMER2,
119 	FUNC_TIMER3,
120 	FUNC_TRACE,
121 	FUNC_UART0,
122 	FUNC_UART1,
123 	FUNC_UART2,
124 	FUNC_UART3,
125 	FUNC_USB0,
126 	FUNC_USB1,
127 	FUNC_MAX
128 };
129 
130 static const char *const lpc18xx_function_names[] = {
131 	[FUNC_R]		= "reserved",
132 	[FUNC_ADC]		= "adc",
133 	[FUNC_ADCTRIG]		= "adctrig",
134 	[FUNC_CAN0]		= "can0",
135 	[FUNC_CAN1]		= "can1",
136 	[FUNC_CGU_OUT]		= "cgu_out",
137 	[FUNC_CLKIN]		= "clkin",
138 	[FUNC_CLKOUT]		= "clkout",
139 	[FUNC_CTIN]		= "ctin",
140 	[FUNC_CTOUT]		= "ctout",
141 	[FUNC_DAC]		= "dac",
142 	[FUNC_EMC]		= "emc",
143 	[FUNC_EMC_ALT]		= "emc_alt",
144 	[FUNC_ENET]		= "enet",
145 	[FUNC_ENET_ALT]		= "enet_alt",
146 	[FUNC_GPIO]		= "gpio",
147 	[FUNC_I2C0]		= "i2c0",
148 	[FUNC_I2C1]		= "i2c1",
149 	[FUNC_I2S0_RX_MCLK]	= "i2s0_rx_mclk",
150 	[FUNC_I2S0_RX_SCK]	= "i2s0_rx_sck",
151 	[FUNC_I2S0_RX_SDA]	= "i2s0_rx_sda",
152 	[FUNC_I2S0_RX_WS]	= "i2s0_rx_ws",
153 	[FUNC_I2S0_TX_MCLK]	= "i2s0_tx_mclk",
154 	[FUNC_I2S0_TX_SCK]	= "i2s0_tx_sck",
155 	[FUNC_I2S0_TX_SDA]	= "i2s0_tx_sda",
156 	[FUNC_I2S0_TX_WS]	= "i2s0_tx_ws",
157 	[FUNC_I2S1]		= "i2s1",
158 	[FUNC_LCD]		= "lcd",
159 	[FUNC_LCD_ALT]		= "lcd_alt",
160 	[FUNC_MCTRL]		= "mctrl",
161 	[FUNC_NMI]		= "nmi",
162 	[FUNC_QEI]		= "qei",
163 	[FUNC_SDMMC]		= "sdmmc",
164 	[FUNC_SGPIO]		= "sgpio",
165 	[FUNC_SPI]		= "spi",
166 	[FUNC_SPIFI]		= "spifi",
167 	[FUNC_SSP0]		= "ssp0",
168 	[FUNC_SSP0_ALT]		= "ssp0_alt",
169 	[FUNC_SSP1]		= "ssp1",
170 	[FUNC_TIMER0]		= "timer0",
171 	[FUNC_TIMER1]		= "timer1",
172 	[FUNC_TIMER2]		= "timer2",
173 	[FUNC_TIMER3]		= "timer3",
174 	[FUNC_TRACE]		= "trace",
175 	[FUNC_UART0]		= "uart0",
176 	[FUNC_UART1]		= "uart1",
177 	[FUNC_UART2]		= "uart2",
178 	[FUNC_UART3]		= "uart3",
179 	[FUNC_USB0]		= "usb0",
180 	[FUNC_USB1]		= "usb1",
181 };
182 
183 struct lpc18xx_pmx_func {
184 	const char **groups;
185 	unsigned ngroups;
186 };
187 
188 struct lpc18xx_scu_data {
189 	struct pinctrl_dev *pctl;
190 	void __iomem *base;
191 	struct clk *clk;
192 	struct lpc18xx_pmx_func func[FUNC_MAX];
193 };
194 
195 struct lpc18xx_pin_caps {
196 	unsigned int offset;
197 	unsigned char functions[LPC18XX_SCU_FUNC_PER_PIN];
198 	unsigned char analog;
199 	unsigned char type;
200 };
201 
202 /* Analog pins are required to have both bias and input disabled */
203 #define LPC18XX_SCU_ANALOG_PIN_CFG	0x10
204 
205 /* Macros to maniupluate analog member in lpc18xx_pin_caps */
206 #define LPC18XX_ANALOG_PIN		BIT(7)
207 #define LPC18XX_ANALOG_ADC(a)		((a >> 5) & 0x3)
208 #define LPC18XX_ANALOG_BIT_MASK		0x1f
209 #define ADC0				(LPC18XX_ANALOG_PIN | (0x00 << 5))
210 #define ADC1				(LPC18XX_ANALOG_PIN | (0x01 << 5))
211 #define DAC				LPC18XX_ANALOG_PIN
212 
213 #define LPC_P(port, pin, f0, f1, f2, f3, f4, f5, f6, f7, a, t)	\
214 static struct lpc18xx_pin_caps lpc18xx_pin_p##port##_##pin = {	\
215 	.offset = 0x##port * 32 * 4 + pin * 4,			\
216 	.functions = {						\
217 			FUNC_##f0, FUNC_##f1, FUNC_##f2,	\
218 			FUNC_##f3, FUNC_##f4, FUNC_##f5,	\
219 			FUNC_##f6, FUNC_##f7,			\
220 	},							\
221 	.analog = a,						\
222 	.type = TYPE_##t,					\
223 }
224 
225 #define LPC_N(pname, off, f0, f1, f2, f3, f4, f5, f6, f7, a, t)	\
226 static struct lpc18xx_pin_caps lpc18xx_pin_##pname = {		\
227 	.offset = off,						\
228 	.functions = {						\
229 			FUNC_##f0, FUNC_##f1, FUNC_##f2,	\
230 			FUNC_##f3, FUNC_##f4, FUNC_##f5,	\
231 			FUNC_##f6, FUNC_##f7,			\
232 	},							\
233 	.analog = a,						\
234 	.type = TYPE_##t,					\
235 }
236 
237 
238 /* Pinmuxing table taken from data sheet */
239 /*    Pin    FUNC0  FUNC1  FUNC2  FUNC3   FUNC4   FUNC5   FUNC6    FUNC7 ANALOG TYPE */
240 LPC_P(0,0,   GPIO,  SSP1,  ENET,  SGPIO,      R,      R, I2S0_TX_WS,I2S1,     0, ND);
241 LPC_P(0,1,   GPIO,  SSP1,ENET_ALT,SGPIO,      R,      R,   ENET,    I2S1,     0, ND);
242 LPC_P(1,0,   GPIO,  CTIN,   EMC,      R,      R,   SSP0,  SGPIO,       R,     0, ND);
243 LPC_P(1,1,   GPIO, CTOUT,   EMC,  SGPIO,      R,   SSP0,      R,       R,     0, ND);
244 LPC_P(1,2,   GPIO, CTOUT,   EMC,  SGPIO,      R,   SSP0,      R,       R,     0, ND);
245 LPC_P(1,3,   GPIO, CTOUT, SGPIO,    EMC,   USB0,   SSP1,      R,   SDMMC,     0, ND);
246 LPC_P(1,4,   GPIO, CTOUT, SGPIO,    EMC,   USB0,   SSP1,      R,   SDMMC,     0, ND);
247 LPC_P(1,5,   GPIO, CTOUT,     R,    EMC,   USB0,   SSP1,  SGPIO,   SDMMC,     0, ND);
248 LPC_P(1,6,   GPIO,  CTIN,     R,    EMC,      R,      R,  SGPIO,   SDMMC,     0, ND);
249 LPC_P(1,7,   GPIO, UART1, CTOUT,    EMC,   USB0,      R,      R,       R,     0, ND);
250 LPC_P(1,8,   GPIO, UART1, CTOUT,    EMC,      R,      R,      R,   SDMMC,     0, ND);
251 LPC_P(1,9,   GPIO, UART1, CTOUT,    EMC,      R,      R,      R,   SDMMC,     0, ND);
252 LPC_P(1,10,  GPIO, UART1, CTOUT,    EMC,      R,      R,      R,   SDMMC,     0, ND);
253 LPC_P(1,11,  GPIO, UART1, CTOUT,    EMC,      R,      R,      R,   SDMMC,     0, ND);
254 LPC_P(1,12,  GPIO, UART1,     R,    EMC, TIMER0,      R,  SGPIO,   SDMMC,     0, ND);
255 LPC_P(1,13,  GPIO, UART1,     R,    EMC, TIMER0,      R,  SGPIO,   SDMMC,     0, ND);
256 LPC_P(1,14,  GPIO, UART1,     R,    EMC, TIMER0,      R,  SGPIO,       R,     0, ND);
257 LPC_P(1,15,  GPIO, UART2, SGPIO,   ENET, TIMER0,      R,      R,       R,     0, ND);
258 LPC_P(1,16,  GPIO, UART2, SGPIO,ENET_ALT,TIMER0,      R,      R,    ENET,     0, ND);
259 LPC_P(1,17,  GPIO, UART2,     R,   ENET, TIMER0,   CAN1,  SGPIO,       R,     0, HD);
260 LPC_P(1,18,  GPIO, UART2,     R,   ENET, TIMER0,   CAN1,  SGPIO,       R,     0, ND);
261 LPC_P(1,19,  ENET,  SSP1,     R,      R, CLKOUT,      R, I2S0_RX_MCLK,I2S1,   0, ND);
262 LPC_P(1,20,  GPIO,  SSP1,     R,   ENET, TIMER0,      R,  SGPIO,       R,     0, ND);
263 LPC_P(2,0,  SGPIO, UART0,   EMC,   USB0,   GPIO,      R, TIMER3,    ENET,     0, ND);
264 LPC_P(2,1,  SGPIO, UART0,   EMC,   USB0,   GPIO,      R, TIMER3,       R,     0, ND);
265 LPC_P(2,2,  SGPIO, UART0,   EMC,   USB0,   GPIO,   CTIN, TIMER3,       R,     0, ND);
266 LPC_P(2,3,  SGPIO,  I2C1, UART3,   CTIN,   GPIO,      R, TIMER3,    USB0,     0, HD);
267 LPC_P(2,4,  SGPIO,  I2C1, UART3,   CTIN,   GPIO,      R, TIMER3,    USB0,     0, HD);
268 LPC_P(2,5,  SGPIO,  CTIN,  USB1, ADCTRIG,  GPIO,      R, TIMER3,    USB0,     0, HD);
269 LPC_P(2,6,  SGPIO, UART0,   EMC,   USB0,   GPIO,   CTIN, TIMER3,       R,     0, ND);
270 LPC_P(2,7,   GPIO, CTOUT, UART3,    EMC,      R,      R, TIMER3,       R,     0, ND);
271 LPC_P(2,8,  SGPIO, CTOUT, UART3,    EMC,   GPIO,      R,      R,       R,     0, ND);
272 LPC_P(2,9,   GPIO, CTOUT, UART3,    EMC,      R,      R,      R,       R,     0, ND);
273 LPC_P(2,10,  GPIO, CTOUT, UART2,    EMC,      R,      R,      R,       R,     0, ND);
274 LPC_P(2,11,  GPIO, CTOUT, UART2,    EMC,      R,      R,      R,       R,     0, ND);
275 LPC_P(2,12,  GPIO, CTOUT,     R,    EMC,      R,      R,      R,   UART2,     0, ND);
276 LPC_P(2,13,  GPIO,  CTIN,     R,    EMC,      R,      R,      R,   UART2,     0, ND);
277 LPC_P(3,0,  I2S0_RX_SCK, I2S0_RX_MCLK, I2S0_TX_SCK, I2S0_TX_MCLK,SSP0,R,R,R,  0, ND);
278 LPC_P(3,1,  I2S0_TX_WS, I2S0_RX_WS,CAN0,USB1,GPIO,    R,    LCD,       R,     0, ND);
279 LPC_P(3,2,  I2S0_TX_SDA, I2S0_RX_SDA,CAN0,USB1,GPIO,  R,    LCD,      R,      0, ND);
280 LPC_P(3,3,      R,   SPI,  SSP0,  SPIFI, CGU_OUT,R, I2S0_TX_MCLK,  I2S1,      0, HS);
281 LPC_P(3,4,   GPIO,     R,     R,  SPIFI,  UART1, I2S0_TX_WS, I2S1,  LCD,      0, ND);
282 LPC_P(3,5,   GPIO,     R,     R,  SPIFI,  UART1, I2S0_TX_SDA,I2S1,  LCD,      0, ND);
283 LPC_P(3,6,   GPIO,   SPI,  SSP0,  SPIFI,      R,  SSP0_ALT,   R,      R,      0, ND);
284 LPC_P(3,7,      R,   SPI,  SSP0,  SPIFI,   GPIO,  SSP0_ALT,   R,      R,      0, ND);
285 LPC_P(3,8,      R,   SPI,  SSP0,  SPIFI,   GPIO,  SSP0_ALT,   R,      R,      0, ND);
286 LPC_P(4,0,   GPIO, MCTRL,   NMI,      R,      R,    LCD,  UART3,      R,      0, ND);
287 LPC_P(4,1,   GPIO, CTOUT,   LCD,      R,      R, LCD_ALT, UART3,   ENET, ADC0|1, ND);
288 LPC_P(4,2,   GPIO, CTOUT,   LCD,      R,      R, LCD_ALT, UART3,  SGPIO,      0, ND);
289 LPC_P(4,3,   GPIO, CTOUT,   LCD,      R,      R, LCD_ALT, UART3,  SGPIO, ADC0|0, ND);
290 LPC_P(4,4,   GPIO, CTOUT,   LCD,      R,      R, LCD_ALT, UART3,  SGPIO,    DAC, ND);
291 LPC_P(4,5,   GPIO, CTOUT,   LCD,      R,      R,      R,      R,  SGPIO,      0, ND);
292 LPC_P(4,6,   GPIO, CTOUT,   LCD,      R,      R,      R,      R,  SGPIO,      0, ND);
293 LPC_P(4,7,    LCD, CLKIN,     R,      R,      R,      R,   I2S1,I2S0_TX_SCK,  0, ND);
294 LPC_P(4,8,      R,  CTIN,   LCD,      R,   GPIO, LCD_ALT,  CAN1,  SGPIO,      0, ND);
295 LPC_P(4,9,      R,  CTIN,   LCD,      R,   GPIO, LCD_ALT,  CAN1,  SGPIO,      0, ND);
296 LPC_P(4,10,     R,  CTIN,   LCD,      R,   GPIO, LCD_ALT,     R,  SGPIO,      0, ND);
297 LPC_P(5,0,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
298 LPC_P(5,1,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
299 LPC_P(5,2,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
300 LPC_P(5,3,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
301 LPC_P(5,4,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
302 LPC_P(5,5,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
303 LPC_P(5,6,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
304 LPC_P(5,7,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
305 LPC_P(6,0,      R, I2S0_RX_MCLK,R,    R, I2S0_RX_SCK, R,      R,      R,      0, ND);
306 LPC_P(6,1,   GPIO,   EMC, UART0, I2S0_RX_WS,  R, TIMER2,      R,      R,      0, ND);
307 LPC_P(6,2,   GPIO,   EMC, UART0, I2S0_RX_SDA, R, TIMER2,      R,      R,      0, ND);
308 LPC_P(6,3,   GPIO,  USB0, SGPIO,    EMC,      R, TIMER2,      R,      R,      0, ND);
309 LPC_P(6,4,   GPIO,  CTIN, UART0,    EMC,      R,      R,      R,      R,      0, ND);
310 LPC_P(6,5,   GPIO, CTOUT, UART0,    EMC,      R,      R,      R,      R,      0, ND);
311 LPC_P(6,6,   GPIO,   EMC, SGPIO,   USB0,      R, TIMER2,      R,      R,      0, ND);
312 LPC_P(6,7,      R,   EMC, SGPIO,   USB0,   GPIO, TIMER2,      R,      R,      0, ND);
313 LPC_P(6,8,      R,   EMC, SGPIO,   USB0,   GPIO, TIMER2,      R,      R,      0, ND);
314 LPC_P(6,9,   GPIO,     R,     R,    EMC,      R, TIMER2,      R,      R,      0, ND);
315 LPC_P(6,10,  GPIO, MCTRL,     R,    EMC,      R,      R,      R,      R,      0, ND);
316 LPC_P(6,11,  GPIO,     R,     R,    EMC,      R, TIMER2,      R,      R,      0, ND);
317 LPC_P(6,12,  GPIO, CTOUT,     R,    EMC,      R,      R,      R,      R,      0, ND);
318 LPC_P(7,0,   GPIO, CTOUT,     R,    LCD,      R,      R,      R,  SGPIO,      0, ND);
319 LPC_P(7,1,   GPIO, CTOUT,I2S0_TX_WS,LCD,LCD_ALT,      R,  UART2,  SGPIO,      0, ND);
320 LPC_P(7,2,   GPIO, CTIN,I2S0_TX_SDA,LCD,LCD_ALT,      R,  UART2,  SGPIO,      0, ND);
321 LPC_P(7,3,   GPIO, CTIN,      R,    LCD,LCD_ALT,      R,      R,      R,      0, ND);
322 LPC_P(7,4,   GPIO, CTOUT,     R,    LCD,LCD_ALT,  TRACE,      R,      R, ADC0|4, ND);
323 LPC_P(7,5,   GPIO, CTOUT,     R,    LCD,LCD_ALT,  TRACE,      R,      R, ADC0|3, ND);
324 LPC_P(7,6,   GPIO, CTOUT,     R,    LCD,      R,  TRACE,      R,      R,      0, ND);
325 LPC_P(7,7,   GPIO, CTOUT,     R,    LCD,      R,  TRACE,   ENET,  SGPIO, ADC1|6, ND);
326 LPC_P(8,0,   GPIO,  USB0,     R,  MCTRL,  SGPIO,      R,      R, TIMER0,      0, HD);
327 LPC_P(8,1,   GPIO,  USB0,     R,  MCTRL,  SGPIO,      R,      R, TIMER0,      0, HD);
328 LPC_P(8,2,   GPIO,  USB0,     R,  MCTRL,  SGPIO,      R,      R, TIMER0,      0, HD);
329 LPC_P(8,3,   GPIO,  USB1,     R,    LCD, LCD_ALT,     R,      R, TIMER0,      0, ND);
330 LPC_P(8,4,   GPIO,  USB1,     R,    LCD, LCD_ALT,     R,      R, TIMER0,      0, ND);
331 LPC_P(8,5,   GPIO,  USB1,     R,    LCD, LCD_ALT,     R,      R, TIMER0,      0, ND);
332 LPC_P(8,6,   GPIO,  USB1,     R,    LCD, LCD_ALT,     R,      R, TIMER0,      0, ND);
333 LPC_P(8,7,   GPIO,  USB1,     R,    LCD, LCD_ALT,     R,      R, TIMER0,      0, ND);
334 LPC_P(8,8,      R,  USB1,     R,      R,      R,      R,CGU_OUT,   I2S1,      0, ND);
335 LPC_P(9,0,   GPIO, MCTRL,     R,      R,      R,   ENET,  SGPIO,   SSP0,      0, ND);
336 LPC_P(9,1,   GPIO, MCTRL,     R,      R, I2S0_TX_WS,ENET, SGPIO,   SSP0,      0, ND);
337 LPC_P(9,2,   GPIO, MCTRL,     R,      R, I2S0_TX_SDA,ENET,SGPIO,   SSP0,      0, ND);
338 LPC_P(9,3,   GPIO, MCTRL,  USB1,      R,      R,   ENET,  SGPIO,  UART3,      0, ND);
339 LPC_P(9,4,      R, MCTRL,  USB1,      R,   GPIO,   ENET,  SGPIO,  UART3,      0, ND);
340 LPC_P(9,5,      R, MCTRL,  USB1,      R,   GPIO,   ENET,  SGPIO,  UART0,      0, ND);
341 LPC_P(9,6,   GPIO, MCTRL,  USB1,      R,      R,   ENET,  SGPIO,  UART0,      0, ND);
342 LPC_P(a,0,      R,     R,     R,      R,      R,   I2S1, CGU_OUT,     R,      0, ND);
343 LPC_P(a,1,   GPIO,   QEI,     R,  UART2,      R,      R,      R,      R,      0, HD);
344 LPC_P(a,2,   GPIO,   QEI,     R,  UART2,      R,      R,      R,      R,      0, HD);
345 LPC_P(a,3,   GPIO,   QEI,     R,      R,      R,      R,      R,      R,      0, HD);
346 LPC_P(a,4,      R, CTOUT,     R,    EMC,   GPIO,      R,      R,      R,      0, ND);
347 LPC_P(b,0,      R, CTOUT,   LCD,      R,   GPIO,      R,      R,      R,      0, ND);
348 LPC_P(b,1,      R,  USB1,   LCD,      R,   GPIO,  CTOUT,      R,      R,      0, ND);
349 LPC_P(b,2,      R,  USB1,   LCD,      R,   GPIO,  CTOUT,      R,      R,      0, ND);
350 LPC_P(b,3,      R,  USB1,   LCD,      R,   GPIO,  CTOUT,      R,      R,      0, ND);
351 LPC_P(b,4,      R,  USB1,   LCD,      R,   GPIO,   CTIN,      R,      R,      0, ND);
352 LPC_P(b,5,      R,  USB1,   LCD,      R,   GPIO,   CTIN, LCD_ALT,     R,      0, ND);
353 LPC_P(b,6,      R,  USB1,   LCD,      R,   GPIO,   CTIN, LCD_ALT,     R, ADC0|6, ND);
354 LPC_P(c,0,      R,  USB1,     R,   ENET,    LCD,      R,      R,  SDMMC, ADC1|1, ND);
355 LPC_P(c,1,   USB1,     R, UART1,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
356 LPC_P(c,2,   USB1,     R, UART1,   ENET,   GPIO,      R,      R,  SDMMC,      0, ND);
357 LPC_P(c,3,   USB1,     R, UART1,   ENET,   GPIO,      R,      R,  SDMMC, ADC1|0, ND);
358 LPC_P(c,4,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
359 LPC_P(c,5,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
360 LPC_P(c,6,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
361 LPC_P(c,7,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
362 LPC_P(c,8,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
363 LPC_P(c,9,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
364 LPC_P(c,10,     R,  USB1, UART1,      R,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
365 LPC_P(c,11,     R,  USB1, UART1,      R,   GPIO,      R,      R,  SDMMC,      0, ND);
366 LPC_P(c,12,     R,     R, UART1,      R,   GPIO,  SGPIO, I2S0_TX_SDA,SDMMC,   0, ND);
367 LPC_P(c,13,     R,     R, UART1,      R,   GPIO,  SGPIO, I2S0_TX_WS, SDMMC,   0, ND);
368 LPC_P(c,14,     R,     R, UART1,      R,   GPIO,  SGPIO,   ENET,  SDMMC,      0, ND);
369 LPC_P(d,0,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
370 LPC_P(d,1,      R,     R,   EMC,      R,   GPIO,  SDMMC,      R,  SGPIO,      0, ND);
371 LPC_P(d,2,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
372 LPC_P(d,3,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
373 LPC_P(d,4,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
374 LPC_P(d,5,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
375 LPC_P(d,6,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
376 LPC_P(d,7,      R,  CTIN,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
377 LPC_P(d,8,      R,  CTIN,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
378 LPC_P(d,9,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
379 LPC_P(d,10,     R,  CTIN,   EMC,      R,   GPIO,      R,      R,      R,      0, ND);
380 LPC_P(d,11,     R,     R,   EMC,      R,   GPIO,   USB1,  CTOUT,      R,      0, ND);
381 LPC_P(d,12,     R,     R,   EMC,      R,   GPIO,      R,  CTOUT,      R,      0, ND);
382 LPC_P(d,13,     R,  CTIN,   EMC,      R,   GPIO,      R,  CTOUT,      R,      0, ND);
383 LPC_P(d,14,     R,     R,   EMC,      R,   GPIO,      R,  CTOUT,      R,      0, ND);
384 LPC_P(d,15,     R,     R,   EMC,      R,   GPIO,  SDMMC,  CTOUT,      R,      0, ND);
385 LPC_P(d,16,     R,     R,   EMC,      R,   GPIO,  SDMMC,  CTOUT,      R,      0, ND);
386 LPC_P(e,0,      R,     R,     R,    EMC,   GPIO,   CAN1,      R,      R,      0, ND);
387 LPC_P(e,1,      R,     R,     R,    EMC,   GPIO,   CAN1,      R,      R,      0, ND);
388 LPC_P(e,2,ADCTRIG,  CAN0,     R,    EMC,   GPIO,      R,      R,      R,      0, ND);
389 LPC_P(e,3,      R,  CAN0,ADCTRIG,   EMC,   GPIO,      R,      R,      R,      0, ND);
390 LPC_P(e,4,      R,   NMI,     R,    EMC,   GPIO,      R,      R,      R,      0, ND);
391 LPC_P(e,5,      R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
392 LPC_P(e,6,      R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
393 LPC_P(e,7,      R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
394 LPC_P(e,8,      R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
395 LPC_P(e,9,      R,  CTIN, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
396 LPC_P(e,10,     R,  CTIN, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
397 LPC_P(e,11,     R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
398 LPC_P(e,12,     R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
399 LPC_P(e,13,     R, CTOUT,  I2C1,    EMC,   GPIO,      R,      R,      R,      0, ND);
400 LPC_P(e,14,     R,     R,     R,    EMC,   GPIO,      R,      R,      R,      0, ND);
401 LPC_P(e,15,     R, CTOUT,  I2C1,    EMC,   GPIO,      R,      R,      R,      0, ND);
402 LPC_P(f,0,   SSP0, CLKIN,     R,      R,      R,      R,      R,   I2S1,      0, ND);
403 LPC_P(f,1,      R,     R,  SSP0,      R,   GPIO,      R,  SGPIO,      R,      0, ND);
404 LPC_P(f,2,      R, UART3,  SSP0,      R,   GPIO,      R,  SGPIO,      R,      0, ND);
405 LPC_P(f,3,      R, UART3,  SSP0,      R,   GPIO,      R,  SGPIO,      R,      0, ND);
406 LPC_P(f,4,   SSP1, CLKIN, TRACE,      R,      R, R, I2S0_TX_MCLK,I2S0_RX_SCK, 0, ND);
407 LPC_P(f,5,      R, UART3,  SSP1,  TRACE,   GPIO,      R,  SGPIO,      R, ADC1|4, ND);
408 LPC_P(f,6,      R, UART3,  SSP1,  TRACE,   GPIO,      R,  SGPIO,   I2S1, ADC1|3, ND);
409 LPC_P(f,7,      R, UART3,  SSP1,  TRACE,   GPIO,      R,  SGPIO,   I2S1, ADC1|7, ND);
410 LPC_P(f,8,      R, UART0,  CTIN,  TRACE,   GPIO,      R,  SGPIO,      R, ADC0|2, ND);
411 LPC_P(f,9,      R, UART0, CTOUT,      R,   GPIO,      R,  SGPIO,      R, ADC1|2, ND);
412 LPC_P(f,10,     R, UART0,     R,      R,   GPIO,      R,  SDMMC,      R, ADC0|5, ND);
413 LPC_P(f,11,     R, UART0,     R,      R,   GPIO,      R,  SDMMC,      R, ADC1|5, ND);
414 
415 /*    Pin      Offset FUNC0  FUNC1  FUNC2  FUNC3  FUNC4    FUNC5   FUNC6      FUNC7 ANALOG TYPE */
416 LPC_N(clk0,     0xc00, EMC, CLKOUT,   R,     R,  SDMMC,   EMC_ALT,  SSP1,      ENET,  0, HS);
417 LPC_N(clk1,     0xc04, EMC, CLKOUT,   R,     R,      R,   CGU_OUT,   R,        I2S1,  0, HS);
418 LPC_N(clk2,     0xc08, EMC, CLKOUT,   R,     R,  SDMMC,   EMC_ALT,I2S0_TX_MCLK,I2S1,  0, HS);
419 LPC_N(clk3,     0xc0c, EMC, CLKOUT,   R,     R,      R,   CGU_OUT,   R,        I2S1,  0, HS);
420 LPC_N(usb1_dm,  0xc80, R,      R,     R,     R,      R,      R,      R,          R,   0, USB1);
421 LPC_N(usb1_dp,  0xc80, R,      R,     R,     R,      R,      R,      R,          R,   0, USB1);
422 LPC_N(i2c0_scl, 0xc84, R,      R,     R,     R,      R,      R,      R,          R,   0, I2C0);
423 LPC_N(i2c0_sda, 0xc84, R,      R,     R,     R,      R,      R,      R,          R,   0, I2C0);
424 
425 #define LPC18XX_PIN_P(port, pin) {			\
426 	.number = 0x##port * 32 + pin,			\
427 	.name = "p"#port"_"#pin,			\
428 	.drv_data = &lpc18xx_pin_p##port##_##pin 	\
429 }
430 
431 /* Pin numbers for special pins */
432 enum {
433 	PIN_CLK0 = 600,
434 	PIN_CLK1,
435 	PIN_CLK2,
436 	PIN_CLK3,
437 	PIN_USB1_DM,
438 	PIN_USB1_DP,
439 	PIN_I2C0_SCL,
440 	PIN_I2C0_SDA,
441 };
442 
443 #define LPC18XX_PIN(pname, n) {				\
444 	.number = n,					\
445 	.name = #pname,					\
446 	.drv_data = &lpc18xx_pin_##pname 		\
447 }
448 
449 static const struct pinctrl_pin_desc lpc18xx_pins[] = {
450 	LPC18XX_PIN_P(0,0),
451 	LPC18XX_PIN_P(0,1),
452 	LPC18XX_PIN_P(1,0),
453 	LPC18XX_PIN_P(1,1),
454 	LPC18XX_PIN_P(1,2),
455 	LPC18XX_PIN_P(1,3),
456 	LPC18XX_PIN_P(1,4),
457 	LPC18XX_PIN_P(1,5),
458 	LPC18XX_PIN_P(1,6),
459 	LPC18XX_PIN_P(1,7),
460 	LPC18XX_PIN_P(1,8),
461 	LPC18XX_PIN_P(1,9),
462 	LPC18XX_PIN_P(1,10),
463 	LPC18XX_PIN_P(1,11),
464 	LPC18XX_PIN_P(1,12),
465 	LPC18XX_PIN_P(1,13),
466 	LPC18XX_PIN_P(1,14),
467 	LPC18XX_PIN_P(1,15),
468 	LPC18XX_PIN_P(1,16),
469 	LPC18XX_PIN_P(1,17),
470 	LPC18XX_PIN_P(1,18),
471 	LPC18XX_PIN_P(1,19),
472 	LPC18XX_PIN_P(1,20),
473 	LPC18XX_PIN_P(2,0),
474 	LPC18XX_PIN_P(2,1),
475 	LPC18XX_PIN_P(2,2),
476 	LPC18XX_PIN_P(2,3),
477 	LPC18XX_PIN_P(2,4),
478 	LPC18XX_PIN_P(2,5),
479 	LPC18XX_PIN_P(2,6),
480 	LPC18XX_PIN_P(2,7),
481 	LPC18XX_PIN_P(2,8),
482 	LPC18XX_PIN_P(2,9),
483 	LPC18XX_PIN_P(2,10),
484 	LPC18XX_PIN_P(2,11),
485 	LPC18XX_PIN_P(2,12),
486 	LPC18XX_PIN_P(2,13),
487 	LPC18XX_PIN_P(3,0),
488 	LPC18XX_PIN_P(3,1),
489 	LPC18XX_PIN_P(3,2),
490 	LPC18XX_PIN_P(3,3),
491 	LPC18XX_PIN_P(3,4),
492 	LPC18XX_PIN_P(3,5),
493 	LPC18XX_PIN_P(3,6),
494 	LPC18XX_PIN_P(3,7),
495 	LPC18XX_PIN_P(3,8),
496 	LPC18XX_PIN_P(4,0),
497 	LPC18XX_PIN_P(4,1),
498 	LPC18XX_PIN_P(4,2),
499 	LPC18XX_PIN_P(4,3),
500 	LPC18XX_PIN_P(4,4),
501 	LPC18XX_PIN_P(4,5),
502 	LPC18XX_PIN_P(4,6),
503 	LPC18XX_PIN_P(4,7),
504 	LPC18XX_PIN_P(4,8),
505 	LPC18XX_PIN_P(4,9),
506 	LPC18XX_PIN_P(4,10),
507 	LPC18XX_PIN_P(5,0),
508 	LPC18XX_PIN_P(5,1),
509 	LPC18XX_PIN_P(5,2),
510 	LPC18XX_PIN_P(5,3),
511 	LPC18XX_PIN_P(5,4),
512 	LPC18XX_PIN_P(5,5),
513 	LPC18XX_PIN_P(5,6),
514 	LPC18XX_PIN_P(5,7),
515 	LPC18XX_PIN_P(6,0),
516 	LPC18XX_PIN_P(6,1),
517 	LPC18XX_PIN_P(6,2),
518 	LPC18XX_PIN_P(6,3),
519 	LPC18XX_PIN_P(6,4),
520 	LPC18XX_PIN_P(6,5),
521 	LPC18XX_PIN_P(6,6),
522 	LPC18XX_PIN_P(6,7),
523 	LPC18XX_PIN_P(6,8),
524 	LPC18XX_PIN_P(6,9),
525 	LPC18XX_PIN_P(6,10),
526 	LPC18XX_PIN_P(6,11),
527 	LPC18XX_PIN_P(6,12),
528 	LPC18XX_PIN_P(7,0),
529 	LPC18XX_PIN_P(7,1),
530 	LPC18XX_PIN_P(7,2),
531 	LPC18XX_PIN_P(7,3),
532 	LPC18XX_PIN_P(7,4),
533 	LPC18XX_PIN_P(7,5),
534 	LPC18XX_PIN_P(7,6),
535 	LPC18XX_PIN_P(7,7),
536 	LPC18XX_PIN_P(8,0),
537 	LPC18XX_PIN_P(8,1),
538 	LPC18XX_PIN_P(8,2),
539 	LPC18XX_PIN_P(8,3),
540 	LPC18XX_PIN_P(8,4),
541 	LPC18XX_PIN_P(8,5),
542 	LPC18XX_PIN_P(8,6),
543 	LPC18XX_PIN_P(8,7),
544 	LPC18XX_PIN_P(8,8),
545 	LPC18XX_PIN_P(9,0),
546 	LPC18XX_PIN_P(9,1),
547 	LPC18XX_PIN_P(9,2),
548 	LPC18XX_PIN_P(9,3),
549 	LPC18XX_PIN_P(9,4),
550 	LPC18XX_PIN_P(9,5),
551 	LPC18XX_PIN_P(9,6),
552 	LPC18XX_PIN_P(a,0),
553 	LPC18XX_PIN_P(a,1),
554 	LPC18XX_PIN_P(a,2),
555 	LPC18XX_PIN_P(a,3),
556 	LPC18XX_PIN_P(a,4),
557 	LPC18XX_PIN_P(b,0),
558 	LPC18XX_PIN_P(b,1),
559 	LPC18XX_PIN_P(b,2),
560 	LPC18XX_PIN_P(b,3),
561 	LPC18XX_PIN_P(b,4),
562 	LPC18XX_PIN_P(b,5),
563 	LPC18XX_PIN_P(b,6),
564 	LPC18XX_PIN_P(c,0),
565 	LPC18XX_PIN_P(c,1),
566 	LPC18XX_PIN_P(c,2),
567 	LPC18XX_PIN_P(c,3),
568 	LPC18XX_PIN_P(c,4),
569 	LPC18XX_PIN_P(c,5),
570 	LPC18XX_PIN_P(c,6),
571 	LPC18XX_PIN_P(c,7),
572 	LPC18XX_PIN_P(c,8),
573 	LPC18XX_PIN_P(c,9),
574 	LPC18XX_PIN_P(c,10),
575 	LPC18XX_PIN_P(c,11),
576 	LPC18XX_PIN_P(c,12),
577 	LPC18XX_PIN_P(c,13),
578 	LPC18XX_PIN_P(c,14),
579 	LPC18XX_PIN_P(d,0),
580 	LPC18XX_PIN_P(d,1),
581 	LPC18XX_PIN_P(d,2),
582 	LPC18XX_PIN_P(d,3),
583 	LPC18XX_PIN_P(d,4),
584 	LPC18XX_PIN_P(d,5),
585 	LPC18XX_PIN_P(d,6),
586 	LPC18XX_PIN_P(d,7),
587 	LPC18XX_PIN_P(d,8),
588 	LPC18XX_PIN_P(d,9),
589 	LPC18XX_PIN_P(d,10),
590 	LPC18XX_PIN_P(d,11),
591 	LPC18XX_PIN_P(d,12),
592 	LPC18XX_PIN_P(d,13),
593 	LPC18XX_PIN_P(d,14),
594 	LPC18XX_PIN_P(d,15),
595 	LPC18XX_PIN_P(d,16),
596 	LPC18XX_PIN_P(e,0),
597 	LPC18XX_PIN_P(e,1),
598 	LPC18XX_PIN_P(e,2),
599 	LPC18XX_PIN_P(e,3),
600 	LPC18XX_PIN_P(e,4),
601 	LPC18XX_PIN_P(e,5),
602 	LPC18XX_PIN_P(e,6),
603 	LPC18XX_PIN_P(e,7),
604 	LPC18XX_PIN_P(e,8),
605 	LPC18XX_PIN_P(e,9),
606 	LPC18XX_PIN_P(e,10),
607 	LPC18XX_PIN_P(e,11),
608 	LPC18XX_PIN_P(e,12),
609 	LPC18XX_PIN_P(e,13),
610 	LPC18XX_PIN_P(e,14),
611 	LPC18XX_PIN_P(e,15),
612 	LPC18XX_PIN_P(f,0),
613 	LPC18XX_PIN_P(f,1),
614 	LPC18XX_PIN_P(f,2),
615 	LPC18XX_PIN_P(f,3),
616 	LPC18XX_PIN_P(f,4),
617 	LPC18XX_PIN_P(f,5),
618 	LPC18XX_PIN_P(f,6),
619 	LPC18XX_PIN_P(f,7),
620 	LPC18XX_PIN_P(f,8),
621 	LPC18XX_PIN_P(f,9),
622 	LPC18XX_PIN_P(f,10),
623 	LPC18XX_PIN_P(f,11),
624 
625 	LPC18XX_PIN(clk0, PIN_CLK0),
626 	LPC18XX_PIN(clk1, PIN_CLK1),
627 	LPC18XX_PIN(clk2, PIN_CLK2),
628 	LPC18XX_PIN(clk3, PIN_CLK3),
629 	LPC18XX_PIN(usb1_dm,  PIN_USB1_DM),
630 	LPC18XX_PIN(usb1_dp,  PIN_USB1_DP),
631 	LPC18XX_PIN(i2c0_scl, PIN_I2C0_SCL),
632 	LPC18XX_PIN(i2c0_sda, PIN_I2C0_SDA),
633 };
634 
635 /* PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt controller */
636 #define PIN_CONFIG_GPIO_PIN_INT		(PIN_CONFIG_END + 1)
637 
638 static const struct pinconf_generic_params lpc18xx_params[] = {
639 	{"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
640 };
641 
642 #ifdef CONFIG_DEBUG_FS
643 static const struct pin_config_item lpc18xx_conf_items[ARRAY_SIZE(lpc18xx_params)] = {
644 	PCONFDUMP(PIN_CONFIG_GPIO_PIN_INT, "gpio pin int", NULL, true),
645 };
646 #endif
647 
648 static int lpc18xx_pconf_get_usb1(enum pin_config_param param, int *arg, u32 reg)
649 {
650 	switch (param) {
651 	case PIN_CONFIG_MODE_LOW_POWER:
652 		if (reg & LPC18XX_SCU_USB1_EPWR)
653 			*arg = 0;
654 		else
655 			*arg = 1;
656 		break;
657 
658 	case PIN_CONFIG_BIAS_DISABLE:
659 		if (reg & LPC18XX_SCU_USB1_EPD)
660 			return -EINVAL;
661 		break;
662 
663 	case PIN_CONFIG_BIAS_PULL_DOWN:
664 		if (reg & LPC18XX_SCU_USB1_EPD)
665 			*arg = 1;
666 		else
667 			return -EINVAL;
668 		break;
669 
670 	default:
671 		return -ENOTSUPP;
672 	}
673 
674 	return 0;
675 }
676 
677 static int lpc18xx_pconf_get_i2c0(enum pin_config_param param, int *arg, u32 reg,
678 				  unsigned pin)
679 {
680 	u8 shift;
681 
682 	if (pin == PIN_I2C0_SCL)
683 		shift = LPC18XX_SCU_I2C0_SCL_SHIFT;
684 	else
685 		shift = LPC18XX_SCU_I2C0_SDA_SHIFT;
686 
687 	switch (param) {
688 	case PIN_CONFIG_INPUT_ENABLE:
689 		if (reg & (LPC18XX_SCU_I2C0_EZI << shift))
690 			*arg = 1;
691 		else
692 			return -EINVAL;
693 		break;
694 
695 	case PIN_CONFIG_SLEW_RATE:
696 		if (reg & (LPC18XX_SCU_I2C0_EHD << shift))
697 			*arg = 1;
698 		else
699 			*arg = 0;
700 		break;
701 
702 	case PIN_CONFIG_INPUT_SCHMITT:
703 		if (reg & (LPC18XX_SCU_I2C0_EFP << shift))
704 			*arg = 3;
705 		else
706 			*arg = 50;
707 		break;
708 
709 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
710 		if (reg & (LPC18XX_SCU_I2C0_ZIF << shift))
711 			return -EINVAL;
712 		else
713 			*arg = 1;
714 		break;
715 
716 	default:
717 		return -ENOTSUPP;
718 	}
719 
720 	return 0;
721 }
722 
723 static int lpc18xx_pin_to_gpio(struct pinctrl_dev *pctldev, unsigned pin)
724 {
725 	struct pinctrl_gpio_range *range;
726 
727 	range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin);
728 	if (!range)
729 		return -EINVAL;
730 
731 	return pin - range->pin_base + range->base;
732 }
733 
734 static int lpc18xx_get_pintsel(void __iomem *addr, u32 val, int *arg)
735 {
736 	u32 reg_val;
737 	int i;
738 
739 	reg_val = readl(addr);
740 	for (i = 0; i < LPC18XX_SCU_IRQ_PER_PINTSEL; i++) {
741 		if ((reg_val & LPC18XX_SCU_PINTSEL_VAL_MASK) == val)
742 			return 0;
743 
744 		reg_val >>= BITS_PER_BYTE;
745 		*arg += 1;
746 	}
747 
748 	return -EINVAL;
749 }
750 
751 static u32 lpc18xx_gpio_to_pintsel_val(int gpio)
752 {
753 	unsigned int gpio_port, gpio_pin;
754 
755 	gpio_port = gpio / LPC18XX_GPIO_PINS_PER_PORT;
756 	gpio_pin  = gpio % LPC18XX_GPIO_PINS_PER_PORT;
757 
758 	return gpio_pin | (gpio_port << LPC18XX_SCU_PINTSEL_PORT_SHIFT);
759 }
760 
761 static int lpc18xx_pconf_get_gpio_pin_int(struct pinctrl_dev *pctldev,
762 					  int *arg, unsigned pin)
763 {
764 	struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
765 	int gpio, ret;
766 	u32 val;
767 
768 	gpio = lpc18xx_pin_to_gpio(pctldev, pin);
769 	if (gpio < 0)
770 		return -ENOTSUPP;
771 
772 	val = lpc18xx_gpio_to_pintsel_val(gpio);
773 
774 	/*
775 	 * Check if this pin has been enabled as a interrupt in any of the two
776 	 * PINTSEL registers. *arg indicates which interrupt number (0-7).
777 	 */
778 	*arg = 0;
779 	ret = lpc18xx_get_pintsel(scu->base + LPC18XX_SCU_PINTSEL0, val, arg);
780 	if (ret == 0)
781 		return ret;
782 
783 	return lpc18xx_get_pintsel(scu->base + LPC18XX_SCU_PINTSEL1, val, arg);
784 }
785 
786 static int lpc18xx_pconf_get_pin(struct pinctrl_dev *pctldev, unsigned param,
787 				 int *arg, u32 reg, unsigned pin,
788 				 struct lpc18xx_pin_caps *pin_cap)
789 {
790 	switch (param) {
791 	case PIN_CONFIG_BIAS_DISABLE:
792 		if ((!(reg & LPC18XX_SCU_PIN_EPD)) && (reg & LPC18XX_SCU_PIN_EPUN))
793 			;
794 		else
795 			return -EINVAL;
796 		break;
797 
798 	case PIN_CONFIG_BIAS_PULL_UP:
799 		if (reg & LPC18XX_SCU_PIN_EPUN)
800 			return -EINVAL;
801 		else
802 			*arg = 1;
803 		break;
804 
805 	case PIN_CONFIG_BIAS_PULL_DOWN:
806 		if (reg & LPC18XX_SCU_PIN_EPD)
807 			*arg = 1;
808 		else
809 			return -EINVAL;
810 		break;
811 
812 	case PIN_CONFIG_INPUT_ENABLE:
813 		if (reg & LPC18XX_SCU_PIN_EZI)
814 			*arg = 1;
815 		else
816 			return -EINVAL;
817 		break;
818 
819 	case PIN_CONFIG_SLEW_RATE:
820 		if (pin_cap->type == TYPE_HD)
821 			return -ENOTSUPP;
822 
823 		if (reg & LPC18XX_SCU_PIN_EHS)
824 			*arg = 1;
825 		else
826 			*arg = 0;
827 		break;
828 
829 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
830 		if (reg & LPC18XX_SCU_PIN_ZIF)
831 			return -EINVAL;
832 		else
833 			*arg = 1;
834 		break;
835 
836 	case PIN_CONFIG_DRIVE_STRENGTH:
837 		if (pin_cap->type != TYPE_HD)
838 			return -ENOTSUPP;
839 
840 		*arg = (reg & LPC18XX_SCU_PIN_EHD_MASK) >> LPC18XX_SCU_PIN_EHD_POS;
841 		switch (*arg) {
842 		case 3: *arg += 5;
843 			fallthrough;
844 		case 2: *arg += 5;
845 			fallthrough;
846 		case 1: *arg += 3;
847 			fallthrough;
848 		case 0: *arg += 4;
849 		}
850 		break;
851 
852 	case PIN_CONFIG_GPIO_PIN_INT:
853 		return lpc18xx_pconf_get_gpio_pin_int(pctldev, arg, pin);
854 
855 	default:
856 		return -ENOTSUPP;
857 	}
858 
859 	return 0;
860 }
861 
862 static struct lpc18xx_pin_caps *lpc18xx_get_pin_caps(unsigned pin)
863 {
864 	int i;
865 
866 	for (i = 0; i < ARRAY_SIZE(lpc18xx_pins); i++) {
867 		if (lpc18xx_pins[i].number == pin)
868 			return lpc18xx_pins[i].drv_data;
869 	}
870 
871 	return NULL;
872 }
873 
874 static int lpc18xx_pconf_get(struct pinctrl_dev *pctldev, unsigned pin,
875 			     unsigned long *config)
876 {
877 	struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
878 	enum pin_config_param param = pinconf_to_config_param(*config);
879 	struct lpc18xx_pin_caps *pin_cap;
880 	int ret, arg = 0;
881 	u32 reg;
882 
883 	pin_cap = lpc18xx_get_pin_caps(pin);
884 	if (!pin_cap)
885 		return -EINVAL;
886 
887 	reg = readl(scu->base + pin_cap->offset);
888 
889 	if (pin_cap->type == TYPE_I2C0)
890 		ret = lpc18xx_pconf_get_i2c0(param, &arg, reg, pin);
891 	else if (pin_cap->type == TYPE_USB1)
892 		ret = lpc18xx_pconf_get_usb1(param, &arg, reg);
893 	else
894 		ret = lpc18xx_pconf_get_pin(pctldev, param, &arg, reg, pin, pin_cap);
895 
896 	if (ret < 0)
897 		return ret;
898 
899 	*config = pinconf_to_config_packed(param, (u16)arg);
900 
901 	return 0;
902 }
903 
904 static int lpc18xx_pconf_set_usb1(struct pinctrl_dev *pctldev,
905 				  enum pin_config_param param,
906 				  u32 param_val, u32 *reg)
907 {
908 	switch (param) {
909 	case PIN_CONFIG_MODE_LOW_POWER:
910 		if (param_val)
911 			*reg &= ~LPC18XX_SCU_USB1_EPWR;
912 		else
913 			*reg |= LPC18XX_SCU_USB1_EPWR;
914 		break;
915 
916 	case PIN_CONFIG_BIAS_DISABLE:
917 		*reg &= ~LPC18XX_SCU_USB1_EPD;
918 		break;
919 
920 	case PIN_CONFIG_BIAS_PULL_DOWN:
921 		*reg |= LPC18XX_SCU_USB1_EPD;
922 		break;
923 
924 	default:
925 		dev_err(pctldev->dev, "Property not supported\n");
926 		return -ENOTSUPP;
927 	}
928 
929 	return 0;
930 }
931 
932 static int lpc18xx_pconf_set_i2c0(struct pinctrl_dev *pctldev,
933 				  enum pin_config_param param,
934 				  u32 param_val, u32 *reg,
935 				  unsigned pin)
936 {
937 	u8 shift;
938 
939 	if (pin == PIN_I2C0_SCL)
940 		shift = LPC18XX_SCU_I2C0_SCL_SHIFT;
941 	else
942 		shift = LPC18XX_SCU_I2C0_SDA_SHIFT;
943 
944 	switch (param) {
945 	case PIN_CONFIG_INPUT_ENABLE:
946 		if (param_val)
947 			*reg |= (LPC18XX_SCU_I2C0_EZI << shift);
948 		else
949 			*reg &= ~(LPC18XX_SCU_I2C0_EZI << shift);
950 		break;
951 
952 	case PIN_CONFIG_SLEW_RATE:
953 		if (param_val)
954 			*reg |= (LPC18XX_SCU_I2C0_EHD << shift);
955 		else
956 			*reg &= ~(LPC18XX_SCU_I2C0_EHD << shift);
957 		break;
958 
959 	case PIN_CONFIG_INPUT_SCHMITT:
960 		if (param_val == 3)
961 			*reg |= (LPC18XX_SCU_I2C0_EFP << shift);
962 		else if (param_val == 50)
963 			*reg &= ~(LPC18XX_SCU_I2C0_EFP << shift);
964 		else
965 			return -ENOTSUPP;
966 		break;
967 
968 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
969 		if (param_val)
970 			*reg &= ~(LPC18XX_SCU_I2C0_ZIF << shift);
971 		else
972 			*reg |= (LPC18XX_SCU_I2C0_ZIF << shift);
973 		break;
974 
975 	default:
976 		dev_err(pctldev->dev, "Property not supported\n");
977 		return -ENOTSUPP;
978 	}
979 
980 	return 0;
981 }
982 
983 static int lpc18xx_pconf_set_gpio_pin_int(struct pinctrl_dev *pctldev,
984 					  u32 param_val, unsigned pin)
985 {
986 	struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
987 	u32 val, reg_val, reg_offset = LPC18XX_SCU_PINTSEL0;
988 	int gpio;
989 
990 	if (param_val >= LPC18XX_GPIO_PIN_INT_MAX)
991 		return -EINVAL;
992 
993 	gpio = lpc18xx_pin_to_gpio(pctldev, pin);
994 	if (gpio < 0)
995 		return -ENOTSUPP;
996 
997 	val = lpc18xx_gpio_to_pintsel_val(gpio);
998 
999 	reg_offset += (param_val / LPC18XX_SCU_IRQ_PER_PINTSEL) * sizeof(u32);
1000 
1001 	reg_val = readl(scu->base + reg_offset);
1002 	reg_val &= ~LPC18XX_SCU_PINTSEL_VAL(LPC18XX_SCU_PINTSEL_VAL_MASK, param_val);
1003 	reg_val |= LPC18XX_SCU_PINTSEL_VAL(val, param_val);
1004 	writel(reg_val, scu->base + reg_offset);
1005 
1006 	return 0;
1007 }
1008 
1009 static int lpc18xx_pconf_set_pin(struct pinctrl_dev *pctldev, unsigned param,
1010 				 u32 param_val, u32 *reg, unsigned pin,
1011 				 struct lpc18xx_pin_caps *pin_cap)
1012 {
1013 	switch (param) {
1014 	case PIN_CONFIG_BIAS_DISABLE:
1015 		*reg &= ~LPC18XX_SCU_PIN_EPD;
1016 		*reg |= LPC18XX_SCU_PIN_EPUN;
1017 		break;
1018 
1019 	case PIN_CONFIG_BIAS_PULL_UP:
1020 		*reg &= ~LPC18XX_SCU_PIN_EPUN;
1021 		break;
1022 
1023 	case PIN_CONFIG_BIAS_PULL_DOWN:
1024 		*reg |= LPC18XX_SCU_PIN_EPD;
1025 		break;
1026 
1027 	case PIN_CONFIG_INPUT_ENABLE:
1028 		if (param_val)
1029 			*reg |= LPC18XX_SCU_PIN_EZI;
1030 		else
1031 			*reg &= ~LPC18XX_SCU_PIN_EZI;
1032 		break;
1033 
1034 	case PIN_CONFIG_SLEW_RATE:
1035 		if (pin_cap->type == TYPE_HD) {
1036 			dev_err(pctldev->dev, "Slew rate unsupported on high-drive pins\n");
1037 			return -ENOTSUPP;
1038 		}
1039 
1040 		if (param_val == 0)
1041 			*reg &= ~LPC18XX_SCU_PIN_EHS;
1042 		else
1043 			*reg |= LPC18XX_SCU_PIN_EHS;
1044 		break;
1045 
1046 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
1047 		if (param_val)
1048 			*reg &= ~LPC18XX_SCU_PIN_ZIF;
1049 		else
1050 			*reg |= LPC18XX_SCU_PIN_ZIF;
1051 		break;
1052 
1053 	case PIN_CONFIG_DRIVE_STRENGTH:
1054 		if (pin_cap->type != TYPE_HD) {
1055 			dev_err(pctldev->dev, "Drive strength available only on high-drive pins\n");
1056 			return -ENOTSUPP;
1057 		}
1058 		*reg &= ~LPC18XX_SCU_PIN_EHD_MASK;
1059 
1060 		switch (param_val) {
1061 		case 20: param_val -= 5;
1062 			fallthrough;
1063 		case 14: param_val -= 5;
1064 			fallthrough;
1065 		case  8: param_val -= 3;
1066 			fallthrough;
1067 		case  4: param_val -= 4;
1068 			 break;
1069 		default:
1070 			dev_err(pctldev->dev, "Drive strength %u unsupported\n", param_val);
1071 			return -ENOTSUPP;
1072 		}
1073 		*reg |= param_val << LPC18XX_SCU_PIN_EHD_POS;
1074 		break;
1075 
1076 	case PIN_CONFIG_GPIO_PIN_INT:
1077 		return lpc18xx_pconf_set_gpio_pin_int(pctldev, param_val, pin);
1078 
1079 	default:
1080 		dev_err(pctldev->dev, "Property not supported\n");
1081 		return -ENOTSUPP;
1082 	}
1083 
1084 	return 0;
1085 }
1086 
1087 static int lpc18xx_pconf_set(struct pinctrl_dev *pctldev, unsigned pin,
1088 			     unsigned long *configs, unsigned num_configs)
1089 {
1090 	struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
1091 	struct lpc18xx_pin_caps *pin_cap;
1092 	enum pin_config_param param;
1093 	u32 param_val;
1094 	u32 reg;
1095 	int ret;
1096 	int i;
1097 
1098 	pin_cap = lpc18xx_get_pin_caps(pin);
1099 	if (!pin_cap)
1100 		return -EINVAL;
1101 
1102 	reg = readl(scu->base + pin_cap->offset);
1103 
1104 	for (i = 0; i < num_configs; i++) {
1105 		param = pinconf_to_config_param(configs[i]);
1106 		param_val = pinconf_to_config_argument(configs[i]);
1107 
1108 		if (pin_cap->type == TYPE_I2C0)
1109 			ret = lpc18xx_pconf_set_i2c0(pctldev, param, param_val, &reg, pin);
1110 		else if (pin_cap->type == TYPE_USB1)
1111 			ret = lpc18xx_pconf_set_usb1(pctldev, param, param_val, &reg);
1112 		else
1113 			ret = lpc18xx_pconf_set_pin(pctldev, param, param_val, &reg, pin, pin_cap);
1114 
1115 		if (ret)
1116 			return ret;
1117 	}
1118 
1119 	writel(reg, scu->base + pin_cap->offset);
1120 
1121 	return 0;
1122 }
1123 
1124 static const struct pinconf_ops lpc18xx_pconf_ops = {
1125 	.is_generic	= true,
1126 	.pin_config_get	= lpc18xx_pconf_get,
1127 	.pin_config_set	= lpc18xx_pconf_set,
1128 };
1129 
1130 static int lpc18xx_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
1131 {
1132 	return ARRAY_SIZE(lpc18xx_function_names);
1133 }
1134 
1135 static const char *lpc18xx_pmx_get_func_name(struct pinctrl_dev *pctldev,
1136 					     unsigned function)
1137 {
1138 	return lpc18xx_function_names[function];
1139 }
1140 
1141 static int lpc18xx_pmx_get_func_groups(struct pinctrl_dev *pctldev,
1142 				       unsigned function,
1143 				       const char *const **groups,
1144 				       unsigned *const num_groups)
1145 {
1146 	struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
1147 
1148 	*groups  = scu->func[function].groups;
1149 	*num_groups = scu->func[function].ngroups;
1150 
1151 	return 0;
1152 }
1153 
1154 static int lpc18xx_pmx_set(struct pinctrl_dev *pctldev, unsigned function,
1155 			   unsigned group)
1156 {
1157 	struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
1158 	struct lpc18xx_pin_caps *pin = lpc18xx_pins[group].drv_data;
1159 	int func;
1160 	u32 reg;
1161 
1162 	/* Dedicated USB1 and I2C0 pins doesn't support muxing */
1163 	if (pin->type == TYPE_USB1) {
1164 		if (function == FUNC_USB1)
1165 			return 0;
1166 
1167 		goto fail;
1168 	}
1169 
1170 	if (pin->type == TYPE_I2C0) {
1171 		if (function == FUNC_I2C0)
1172 			return 0;
1173 
1174 		goto fail;
1175 	}
1176 
1177 	if (function == FUNC_ADC && (pin->analog & LPC18XX_ANALOG_PIN)) {
1178 		u32 offset;
1179 
1180 		writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset);
1181 
1182 		if (LPC18XX_ANALOG_ADC(pin->analog) == 0)
1183 			offset = LPC18XX_SCU_REG_ENAIO0;
1184 		else
1185 			offset = LPC18XX_SCU_REG_ENAIO1;
1186 
1187 		reg = readl(scu->base + offset);
1188 		reg |= pin->analog & LPC18XX_ANALOG_BIT_MASK;
1189 		writel(reg, scu->base + offset);
1190 
1191 		return 0;
1192 	}
1193 
1194 	if (function == FUNC_DAC && (pin->analog & LPC18XX_ANALOG_PIN)) {
1195 		writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset);
1196 
1197 		reg = readl(scu->base + LPC18XX_SCU_REG_ENAIO2);
1198 		reg |= LPC18XX_SCU_REG_ENAIO2_DAC;
1199 		writel(reg, scu->base + LPC18XX_SCU_REG_ENAIO2);
1200 
1201 		return 0;
1202 	}
1203 
1204 	for (func = 0; func < LPC18XX_SCU_FUNC_PER_PIN; func++) {
1205 		if (function == pin->functions[func])
1206 			break;
1207 	}
1208 
1209 	if (func >= LPC18XX_SCU_FUNC_PER_PIN)
1210 		goto fail;
1211 
1212 	reg = readl(scu->base + pin->offset);
1213 	reg &= ~LPC18XX_SCU_PIN_MODE_MASK;
1214 	writel(reg | func, scu->base + pin->offset);
1215 
1216 	return 0;
1217 fail:
1218 	dev_err(pctldev->dev, "Pin %s can't be %s\n", lpc18xx_pins[group].name,
1219 						      lpc18xx_function_names[function]);
1220 	return -EINVAL;
1221 }
1222 
1223 static const struct pinmux_ops lpc18xx_pmx_ops = {
1224 	.get_functions_count	= lpc18xx_pmx_get_funcs_count,
1225 	.get_function_name	= lpc18xx_pmx_get_func_name,
1226 	.get_function_groups	= lpc18xx_pmx_get_func_groups,
1227 	.set_mux		= lpc18xx_pmx_set,
1228 };
1229 
1230 static int lpc18xx_pctl_get_groups_count(struct pinctrl_dev *pctldev)
1231 {
1232 	return ARRAY_SIZE(lpc18xx_pins);
1233 }
1234 
1235 static const char *lpc18xx_pctl_get_group_name(struct pinctrl_dev *pctldev,
1236 					       unsigned group)
1237 {
1238 	return lpc18xx_pins[group].name;
1239 }
1240 
1241 static int lpc18xx_pctl_get_group_pins(struct pinctrl_dev *pctldev,
1242 				       unsigned group,
1243 				       const unsigned **pins,
1244 				       unsigned *num_pins)
1245 {
1246 	*pins = &lpc18xx_pins[group].number;
1247 	*num_pins = 1;
1248 
1249 	return 0;
1250 }
1251 
1252 static const struct pinctrl_ops lpc18xx_pctl_ops = {
1253 	.get_groups_count	= lpc18xx_pctl_get_groups_count,
1254 	.get_group_name		= lpc18xx_pctl_get_group_name,
1255 	.get_group_pins		= lpc18xx_pctl_get_group_pins,
1256 	.dt_node_to_map		= pinconf_generic_dt_node_to_map_pin,
1257 	.dt_free_map		= pinctrl_utils_free_map,
1258 };
1259 
1260 static struct pinctrl_desc lpc18xx_scu_desc = {
1261 	.name = "lpc18xx/43xx-scu",
1262 	.pins = lpc18xx_pins,
1263 	.npins = ARRAY_SIZE(lpc18xx_pins),
1264 	.pctlops = &lpc18xx_pctl_ops,
1265 	.pmxops = &lpc18xx_pmx_ops,
1266 	.confops = &lpc18xx_pconf_ops,
1267 	.num_custom_params = ARRAY_SIZE(lpc18xx_params),
1268 	.custom_params = lpc18xx_params,
1269 #ifdef CONFIG_DEBUG_FS
1270 	.custom_conf_items = lpc18xx_conf_items,
1271 #endif
1272 	.owner = THIS_MODULE,
1273 };
1274 
1275 static bool lpc18xx_valid_pin_function(unsigned pin, unsigned function)
1276 {
1277 	struct lpc18xx_pin_caps *p = lpc18xx_pins[pin].drv_data;
1278 	int i;
1279 
1280 	if (function == FUNC_DAC && p->analog == DAC)
1281 		return true;
1282 
1283 	if (function == FUNC_ADC && p->analog)
1284 		return true;
1285 
1286 	if (function == FUNC_I2C0 && p->type == TYPE_I2C0)
1287 		return true;
1288 
1289 	if (function == FUNC_USB1 && p->type == TYPE_USB1)
1290 		return true;
1291 
1292 	for (i = 0; i < LPC18XX_SCU_FUNC_PER_PIN; i++) {
1293 		if (function == p->functions[i])
1294 			return true;
1295 	}
1296 
1297 	return false;
1298 }
1299 
1300 static int lpc18xx_create_group_func_map(struct device *dev,
1301 					 struct lpc18xx_scu_data *scu)
1302 {
1303 	u16 pins[ARRAY_SIZE(lpc18xx_pins)];
1304 	int func, ngroups, i;
1305 
1306 	for (func = 0; func < FUNC_MAX; func++) {
1307 		for (ngroups = 0, i = 0; i < ARRAY_SIZE(lpc18xx_pins); i++) {
1308 			if (lpc18xx_valid_pin_function(i, func))
1309 				pins[ngroups++] = i;
1310 		}
1311 
1312 		scu->func[func].ngroups = ngroups;
1313 		scu->func[func].groups = devm_kcalloc(dev,
1314 						      ngroups, sizeof(char *),
1315 						      GFP_KERNEL);
1316 		if (!scu->func[func].groups)
1317 			return -ENOMEM;
1318 
1319 		for (i = 0; i < ngroups; i++)
1320 			scu->func[func].groups[i] = lpc18xx_pins[pins[i]].name;
1321 	}
1322 
1323 	return 0;
1324 }
1325 
1326 static int lpc18xx_scu_probe(struct platform_device *pdev)
1327 {
1328 	struct lpc18xx_scu_data *scu;
1329 	int ret;
1330 
1331 	scu = devm_kzalloc(&pdev->dev, sizeof(*scu), GFP_KERNEL);
1332 	if (!scu)
1333 		return -ENOMEM;
1334 
1335 	scu->base = devm_platform_ioremap_resource(pdev, 0);
1336 	if (IS_ERR(scu->base))
1337 		return PTR_ERR(scu->base);
1338 
1339 	scu->clk = devm_clk_get(&pdev->dev, NULL);
1340 	if (IS_ERR(scu->clk)) {
1341 		dev_err(&pdev->dev, "Input clock not found.\n");
1342 		return PTR_ERR(scu->clk);
1343 	}
1344 
1345 	ret = lpc18xx_create_group_func_map(&pdev->dev, scu);
1346 	if (ret) {
1347 		dev_err(&pdev->dev, "Unable to create group func map.\n");
1348 		return ret;
1349 	}
1350 
1351 	ret = clk_prepare_enable(scu->clk);
1352 	if (ret) {
1353 		dev_err(&pdev->dev, "Unable to enable clock.\n");
1354 		return ret;
1355 	}
1356 
1357 	platform_set_drvdata(pdev, scu);
1358 
1359 	scu->pctl = devm_pinctrl_register(&pdev->dev, &lpc18xx_scu_desc, scu);
1360 	if (IS_ERR(scu->pctl)) {
1361 		dev_err(&pdev->dev, "Could not register pinctrl driver\n");
1362 		clk_disable_unprepare(scu->clk);
1363 		return PTR_ERR(scu->pctl);
1364 	}
1365 
1366 	return 0;
1367 }
1368 
1369 static const struct of_device_id lpc18xx_scu_match[] = {
1370 	{ .compatible = "nxp,lpc1850-scu" },
1371 	{},
1372 };
1373 
1374 static struct platform_driver lpc18xx_scu_driver = {
1375 	.probe		= lpc18xx_scu_probe,
1376 	.driver = {
1377 		.name		= "lpc18xx-scu",
1378 		.of_match_table	= lpc18xx_scu_match,
1379 		.suppress_bind_attrs = true,
1380 	},
1381 };
1382 builtin_platform_driver(lpc18xx_scu_driver);
1383