1 /*
2  * Copyright (C) 2005 Ivan Kokshaysky
3  * Copyright (C) SAN People
4  *
5  * Parallel I/O Controller (PIO) - System peripherals registers.
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  */
12 
13 #ifndef __PINCTRL_AT91_H
14 #define __PINCTRL_AT91_H
15 
16 #define PIO_PER		0x00	/* Enable Register */
17 #define PIO_PDR		0x04	/* Disable Register */
18 #define PIO_PSR		0x08	/* Status Register */
19 #define PIO_OER		0x10	/* Output Enable Register */
20 #define PIO_ODR		0x14	/* Output Disable Register */
21 #define PIO_OSR		0x18	/* Output Status Register */
22 #define PIO_IFER	0x20	/* Glitch Input Filter Enable */
23 #define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
24 #define PIO_IFSR	0x28	/* Glitch Input Filter Status */
25 #define PIO_SODR	0x30	/* Set Output Data Register */
26 #define PIO_CODR	0x34	/* Clear Output Data Register */
27 #define PIO_ODSR	0x38	/* Output Data Status Register */
28 #define PIO_PDSR	0x3c	/* Pin Data Status Register */
29 #define PIO_IER		0x40	/* Interrupt Enable Register */
30 #define PIO_IDR		0x44	/* Interrupt Disable Register */
31 #define PIO_IMR		0x48	/* Interrupt Mask Register */
32 #define PIO_ISR		0x4c	/* Interrupt Status Register */
33 #define PIO_MDER	0x50	/* Multi-driver Enable Register */
34 #define PIO_MDDR	0x54	/* Multi-driver Disable Register */
35 #define PIO_MDSR	0x58	/* Multi-driver Status Register */
36 #define PIO_PUDR	0x60	/* Pull-up Disable Register */
37 #define PIO_PUER	0x64	/* Pull-up Enable Register */
38 #define PIO_PUSR	0x68	/* Pull-up Status Register */
39 #define PIO_ASR		0x70	/* Peripheral A Select Register */
40 #define PIO_ABCDSR1	0x70	/* Peripheral ABCD Select Register 1 [some sam9 only] */
41 #define PIO_BSR		0x74	/* Peripheral B Select Register */
42 #define PIO_ABCDSR2	0x74	/* Peripheral ABCD Select Register 2 [some sam9 only] */
43 #define PIO_ABSR	0x78	/* AB Status Register */
44 #define PIO_IFSCDR	0x80	/* Input Filter Slow Clock Disable Register */
45 #define PIO_IFSCER	0x84	/* Input Filter Slow Clock Enable Register */
46 #define PIO_IFSCSR	0x88	/* Input Filter Slow Clock Status Register */
47 #define PIO_SCDR	0x8c	/* Slow Clock Divider Debouncing Register */
48 #define		PIO_SCDR_DIV	(0x3fff <<  0)		/* Slow Clock Divider Mask */
49 #define PIO_PPDDR	0x90	/* Pad Pull-down Disable Register */
50 #define PIO_PPDER	0x94	/* Pad Pull-down Enable Register */
51 #define PIO_PPDSR	0x98	/* Pad Pull-down Status Register */
52 #define PIO_OWER	0xa0	/* Output Write Enable Register */
53 #define PIO_OWDR	0xa4	/* Output Write Disable Register */
54 #define PIO_OWSR	0xa8	/* Output Write Status Register */
55 #define PIO_AIMER	0xb0	/* Additional Interrupt Modes Enable Register */
56 #define PIO_AIMDR	0xb4	/* Additional Interrupt Modes Disable Register */
57 #define PIO_AIMMR	0xb8	/* Additional Interrupt Modes Mask Register */
58 #define PIO_ESR		0xc0	/* Edge Select Register */
59 #define PIO_LSR		0xc4	/* Level Select Register */
60 #define PIO_ELSR	0xc8	/* Edge/Level Status Register */
61 #define PIO_FELLSR	0xd0	/* Falling Edge/Low Level Select Register */
62 #define PIO_REHLSR	0xd4	/* Rising Edge/ High Level Select Register */
63 #define PIO_FRLHSR	0xd8	/* Fall/Rise - Low/High Status Register */
64 #define PIO_SCHMITT	0x100	/* Schmitt Trigger Register */
65 
66 #define SAMA5D3_PIO_DRIVER1		0x118  /*PIO Driver 1 register offset*/
67 #define SAMA5D3_PIO_DRIVER2		0x11C  /*PIO Driver 2 register offset*/
68 
69 #define AT91SAM9X5_PIO_DRIVER1	0x114  /*PIO Driver 1 register offset*/
70 #define AT91SAM9X5_PIO_DRIVER2	0x118  /*PIO Driver 2 register offset*/
71 
72 #define SAM9X60_PIO_SLEWR	0x110	/* PIO Slew Rate Control Register */
73 #define SAM9X60_PIO_DRIVER1	0x118	/* PIO Driver 1 register offset */
74 
75 #endif
76