1 /* 2 * Copyright (C) ST-Ericsson SA 2013 3 * 4 * Author: Patrice Chotard <patrice.chotard@st.com> 5 * License terms: GNU General Public License (GPL) version 2 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 */ 11 #include <linux/kernel.h> 12 #include <linux/types.h> 13 #include <linux/slab.h> 14 #include <linux/init.h> 15 #include <linux/module.h> 16 #include <linux/err.h> 17 #include <linux/of.h> 18 #include <linux/of_device.h> 19 #include <linux/platform_device.h> 20 #include <linux/gpio.h> 21 #include <linux/irq.h> 22 #include <linux/irqdomain.h> 23 #include <linux/interrupt.h> 24 #include <linux/bitops.h> 25 #include <linux/mfd/abx500.h> 26 #include <linux/mfd/abx500/ab8500.h> 27 #include <linux/pinctrl/pinctrl.h> 28 #include <linux/pinctrl/consumer.h> 29 #include <linux/pinctrl/pinmux.h> 30 #include <linux/pinctrl/pinconf.h> 31 #include <linux/pinctrl/pinconf-generic.h> 32 #include <linux/pinctrl/machine.h> 33 34 #include "pinctrl-abx500.h" 35 #include "../core.h" 36 #include "../pinconf.h" 37 #include "../pinctrl-utils.h" 38 39 /* 40 * The AB9540 and AB8540 GPIO support are extended versions 41 * of the AB8500 GPIO support. 42 * The AB9540 supports an additional (7th) register so that 43 * more GPIO may be configured and used. 44 * The AB8540 supports 4 new gpios (GPIOx_VBAT) that have 45 * internal pull-up and pull-down capabilities. 46 */ 47 48 /* 49 * GPIO registers offset 50 * Bank: 0x10 51 */ 52 #define AB8500_GPIO_SEL1_REG 0x00 53 #define AB8500_GPIO_SEL2_REG 0x01 54 #define AB8500_GPIO_SEL3_REG 0x02 55 #define AB8500_GPIO_SEL4_REG 0x03 56 #define AB8500_GPIO_SEL5_REG 0x04 57 #define AB8500_GPIO_SEL6_REG 0x05 58 #define AB9540_GPIO_SEL7_REG 0x06 59 60 #define AB8500_GPIO_DIR1_REG 0x10 61 #define AB8500_GPIO_DIR2_REG 0x11 62 #define AB8500_GPIO_DIR3_REG 0x12 63 #define AB8500_GPIO_DIR4_REG 0x13 64 #define AB8500_GPIO_DIR5_REG 0x14 65 #define AB8500_GPIO_DIR6_REG 0x15 66 #define AB9540_GPIO_DIR7_REG 0x16 67 68 #define AB8500_GPIO_OUT1_REG 0x20 69 #define AB8500_GPIO_OUT2_REG 0x21 70 #define AB8500_GPIO_OUT3_REG 0x22 71 #define AB8500_GPIO_OUT4_REG 0x23 72 #define AB8500_GPIO_OUT5_REG 0x24 73 #define AB8500_GPIO_OUT6_REG 0x25 74 #define AB9540_GPIO_OUT7_REG 0x26 75 76 #define AB8500_GPIO_PUD1_REG 0x30 77 #define AB8500_GPIO_PUD2_REG 0x31 78 #define AB8500_GPIO_PUD3_REG 0x32 79 #define AB8500_GPIO_PUD4_REG 0x33 80 #define AB8500_GPIO_PUD5_REG 0x34 81 #define AB8500_GPIO_PUD6_REG 0x35 82 #define AB9540_GPIO_PUD7_REG 0x36 83 84 #define AB8500_GPIO_IN1_REG 0x40 85 #define AB8500_GPIO_IN2_REG 0x41 86 #define AB8500_GPIO_IN3_REG 0x42 87 #define AB8500_GPIO_IN4_REG 0x43 88 #define AB8500_GPIO_IN5_REG 0x44 89 #define AB8500_GPIO_IN6_REG 0x45 90 #define AB9540_GPIO_IN7_REG 0x46 91 #define AB8540_GPIO_VINSEL_REG 0x47 92 #define AB8540_GPIO_PULL_UPDOWN_REG 0x48 93 #define AB8500_GPIO_ALTFUN_REG 0x50 94 #define AB8540_GPIO_PULL_UPDOWN_MASK 0x03 95 #define AB8540_GPIO_VINSEL_MASK 0x03 96 #define AB8540_GPIOX_VBAT_START 51 97 #define AB8540_GPIOX_VBAT_END 54 98 99 #define ABX500_GPIO_INPUT 0 100 #define ABX500_GPIO_OUTPUT 1 101 102 struct abx500_pinctrl { 103 struct device *dev; 104 struct pinctrl_dev *pctldev; 105 struct abx500_pinctrl_soc_data *soc; 106 struct gpio_chip chip; 107 struct ab8500 *parent; 108 struct abx500_gpio_irq_cluster *irq_cluster; 109 int irq_cluster_size; 110 }; 111 112 static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg, 113 unsigned offset, bool *bit) 114 { 115 struct abx500_pinctrl *pct = gpiochip_get_data(chip); 116 u8 pos = offset % 8; 117 u8 val; 118 int ret; 119 120 reg += offset / 8; 121 ret = abx500_get_register_interruptible(pct->dev, 122 AB8500_MISC, reg, &val); 123 124 *bit = !!(val & BIT(pos)); 125 126 if (ret < 0) 127 dev_err(pct->dev, 128 "%s read reg =%x, offset=%x failed (%d)\n", 129 __func__, reg, offset, ret); 130 131 return ret; 132 } 133 134 static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg, 135 unsigned offset, int val) 136 { 137 struct abx500_pinctrl *pct = gpiochip_get_data(chip); 138 u8 pos = offset % 8; 139 int ret; 140 141 reg += offset / 8; 142 ret = abx500_mask_and_set_register_interruptible(pct->dev, 143 AB8500_MISC, reg, BIT(pos), val << pos); 144 if (ret < 0) 145 dev_err(pct->dev, "%s write reg, %x offset %x failed (%d)\n", 146 __func__, reg, offset, ret); 147 148 return ret; 149 } 150 151 /** 152 * abx500_gpio_get() - Get the particular GPIO value 153 * @chip: Gpio device 154 * @offset: GPIO number to read 155 */ 156 static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset) 157 { 158 struct abx500_pinctrl *pct = gpiochip_get_data(chip); 159 bool bit; 160 bool is_out; 161 u8 gpio_offset = offset - 1; 162 int ret; 163 164 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG, 165 gpio_offset, &is_out); 166 if (ret < 0) 167 goto out; 168 169 if (is_out) 170 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_OUT1_REG, 171 gpio_offset, &bit); 172 else 173 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG, 174 gpio_offset, &bit); 175 out: 176 if (ret < 0) { 177 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); 178 return ret; 179 } 180 181 return bit; 182 } 183 184 static void abx500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) 185 { 186 struct abx500_pinctrl *pct = gpiochip_get_data(chip); 187 int ret; 188 189 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); 190 if (ret < 0) 191 dev_err(pct->dev, "%s write failed (%d)\n", __func__, ret); 192 } 193 194 #ifdef CONFIG_DEBUG_FS 195 static int abx500_get_pull_updown(struct abx500_pinctrl *pct, int offset, 196 enum abx500_gpio_pull_updown *pull_updown) 197 { 198 u8 pos; 199 u8 val; 200 int ret; 201 struct pullud *pullud; 202 203 if (!pct->soc->pullud) { 204 dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature", 205 __func__); 206 ret = -EPERM; 207 goto out; 208 } 209 210 pullud = pct->soc->pullud; 211 212 if ((offset < pullud->first_pin) 213 || (offset > pullud->last_pin)) { 214 ret = -EINVAL; 215 goto out; 216 } 217 218 ret = abx500_get_register_interruptible(pct->dev, 219 AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG, &val); 220 221 pos = (offset - pullud->first_pin) << 1; 222 *pull_updown = (val >> pos) & AB8540_GPIO_PULL_UPDOWN_MASK; 223 224 out: 225 if (ret < 0) 226 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); 227 228 return ret; 229 } 230 #endif 231 232 static int abx500_set_pull_updown(struct abx500_pinctrl *pct, 233 int offset, enum abx500_gpio_pull_updown val) 234 { 235 u8 pos; 236 int ret; 237 struct pullud *pullud; 238 239 if (!pct->soc->pullud) { 240 dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature", 241 __func__); 242 ret = -EPERM; 243 goto out; 244 } 245 246 pullud = pct->soc->pullud; 247 248 if ((offset < pullud->first_pin) 249 || (offset > pullud->last_pin)) { 250 ret = -EINVAL; 251 goto out; 252 } 253 pos = (offset - pullud->first_pin) << 1; 254 255 ret = abx500_mask_and_set_register_interruptible(pct->dev, 256 AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG, 257 AB8540_GPIO_PULL_UPDOWN_MASK << pos, val << pos); 258 259 out: 260 if (ret < 0) 261 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); 262 263 return ret; 264 } 265 266 static bool abx500_pullud_supported(struct gpio_chip *chip, unsigned gpio) 267 { 268 struct abx500_pinctrl *pct = gpiochip_get_data(chip); 269 struct pullud *pullud = pct->soc->pullud; 270 271 return (pullud && 272 gpio >= pullud->first_pin && 273 gpio <= pullud->last_pin); 274 } 275 276 static int abx500_gpio_direction_output(struct gpio_chip *chip, 277 unsigned offset, 278 int val) 279 { 280 struct abx500_pinctrl *pct = gpiochip_get_data(chip); 281 unsigned gpio; 282 int ret; 283 284 /* set direction as output */ 285 ret = abx500_gpio_set_bits(chip, 286 AB8500_GPIO_DIR1_REG, 287 offset, 288 ABX500_GPIO_OUTPUT); 289 if (ret < 0) 290 goto out; 291 292 /* disable pull down */ 293 ret = abx500_gpio_set_bits(chip, 294 AB8500_GPIO_PUD1_REG, 295 offset, 296 ABX500_GPIO_PULL_NONE); 297 if (ret < 0) 298 goto out; 299 300 /* if supported, disable both pull down and pull up */ 301 gpio = offset + 1; 302 if (abx500_pullud_supported(chip, gpio)) { 303 ret = abx500_set_pull_updown(pct, 304 gpio, 305 ABX500_GPIO_PULL_NONE); 306 } 307 out: 308 if (ret < 0) { 309 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); 310 return ret; 311 } 312 313 /* set the output as 1 or 0 */ 314 return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); 315 } 316 317 static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) 318 { 319 /* set the register as input */ 320 return abx500_gpio_set_bits(chip, 321 AB8500_GPIO_DIR1_REG, 322 offset, 323 ABX500_GPIO_INPUT); 324 } 325 326 static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) 327 { 328 struct abx500_pinctrl *pct = gpiochip_get_data(chip); 329 /* The AB8500 GPIO numbers are off by one */ 330 int gpio = offset + 1; 331 int hwirq; 332 int i; 333 334 for (i = 0; i < pct->irq_cluster_size; i++) { 335 struct abx500_gpio_irq_cluster *cluster = 336 &pct->irq_cluster[i]; 337 338 if (gpio >= cluster->start && gpio <= cluster->end) { 339 /* 340 * The ABx500 GPIO's associated IRQs are clustered together 341 * throughout the interrupt numbers at irregular intervals. 342 * To solve this quandry, we have placed the read-in values 343 * into the cluster information table. 344 */ 345 hwirq = gpio - cluster->start + cluster->to_irq; 346 return irq_create_mapping(pct->parent->domain, hwirq); 347 } 348 } 349 350 return -EINVAL; 351 } 352 353 static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, 354 unsigned gpio, int alt_setting) 355 { 356 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 357 struct alternate_functions af = pct->soc->alternate_functions[gpio]; 358 int ret; 359 int val; 360 unsigned offset; 361 362 const char *modes[] = { 363 [ABX500_DEFAULT] = "default", 364 [ABX500_ALT_A] = "altA", 365 [ABX500_ALT_B] = "altB", 366 [ABX500_ALT_C] = "altC", 367 }; 368 369 /* sanity check */ 370 if (((alt_setting == ABX500_ALT_A) && (af.gpiosel_bit == UNUSED)) || 371 ((alt_setting == ABX500_ALT_B) && (af.alt_bit1 == UNUSED)) || 372 ((alt_setting == ABX500_ALT_C) && (af.alt_bit2 == UNUSED))) { 373 dev_dbg(pct->dev, "pin %d doesn't support %s mode\n", gpio, 374 modes[alt_setting]); 375 return -EINVAL; 376 } 377 378 /* on ABx5xx, there is no GPIO0, so adjust the offset */ 379 offset = gpio - 1; 380 381 switch (alt_setting) { 382 case ABX500_DEFAULT: 383 /* 384 * for ABx5xx family, default mode is always selected by 385 * writing 0 to GPIOSELx register, except for pins which 386 * support at least ALT_B mode, default mode is selected 387 * by writing 1 to GPIOSELx register 388 */ 389 val = 0; 390 if (af.alt_bit1 != UNUSED) 391 val++; 392 393 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, 394 offset, val); 395 break; 396 397 case ABX500_ALT_A: 398 /* 399 * for ABx5xx family, alt_a mode is always selected by 400 * writing 1 to GPIOSELx register, except for pins which 401 * support at least ALT_B mode, alt_a mode is selected 402 * by writing 0 to GPIOSELx register and 0 in ALTFUNC 403 * register 404 */ 405 if (af.alt_bit1 != UNUSED) { 406 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, 407 offset, 0); 408 if (ret < 0) 409 goto out; 410 411 ret = abx500_gpio_set_bits(chip, 412 AB8500_GPIO_ALTFUN_REG, 413 af.alt_bit1, 414 !!(af.alta_val & BIT(0))); 415 if (ret < 0) 416 goto out; 417 418 if (af.alt_bit2 != UNUSED) 419 ret = abx500_gpio_set_bits(chip, 420 AB8500_GPIO_ALTFUN_REG, 421 af.alt_bit2, 422 !!(af.alta_val & BIT(1))); 423 } else 424 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, 425 offset, 1); 426 break; 427 428 case ABX500_ALT_B: 429 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, 430 offset, 0); 431 if (ret < 0) 432 goto out; 433 434 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, 435 af.alt_bit1, !!(af.altb_val & BIT(0))); 436 if (ret < 0) 437 goto out; 438 439 if (af.alt_bit2 != UNUSED) 440 ret = abx500_gpio_set_bits(chip, 441 AB8500_GPIO_ALTFUN_REG, 442 af.alt_bit2, 443 !!(af.altb_val & BIT(1))); 444 break; 445 446 case ABX500_ALT_C: 447 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, 448 offset, 0); 449 if (ret < 0) 450 goto out; 451 452 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, 453 af.alt_bit2, !!(af.altc_val & BIT(0))); 454 if (ret < 0) 455 goto out; 456 457 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, 458 af.alt_bit2, !!(af.altc_val & BIT(1))); 459 break; 460 461 default: 462 dev_dbg(pct->dev, "unknown alt_setting %d\n", alt_setting); 463 464 return -EINVAL; 465 } 466 out: 467 if (ret < 0) 468 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); 469 470 return ret; 471 } 472 473 #ifdef CONFIG_DEBUG_FS 474 static int abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, 475 unsigned gpio) 476 { 477 u8 mode; 478 bool bit_mode; 479 bool alt_bit1; 480 bool alt_bit2; 481 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 482 struct alternate_functions af = pct->soc->alternate_functions[gpio]; 483 /* on ABx5xx, there is no GPIO0, so adjust the offset */ 484 unsigned offset = gpio - 1; 485 int ret; 486 487 /* 488 * if gpiosel_bit is set to unused, 489 * it means no GPIO or special case 490 */ 491 if (af.gpiosel_bit == UNUSED) 492 return ABX500_DEFAULT; 493 494 /* read GpioSelx register */ 495 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8), 496 af.gpiosel_bit, &bit_mode); 497 if (ret < 0) 498 goto out; 499 500 mode = bit_mode; 501 502 /* sanity check */ 503 if ((af.alt_bit1 < UNUSED) || (af.alt_bit1 > 7) || 504 (af.alt_bit2 < UNUSED) || (af.alt_bit2 > 7)) { 505 dev_err(pct->dev, 506 "alt_bitX value not in correct range (-1 to 7)\n"); 507 return -EINVAL; 508 } 509 510 /* if alt_bit2 is used, alt_bit1 must be used too */ 511 if ((af.alt_bit2 != UNUSED) && (af.alt_bit1 == UNUSED)) { 512 dev_err(pct->dev, 513 "if alt_bit2 is used, alt_bit1 can't be unused\n"); 514 return -EINVAL; 515 } 516 517 /* check if pin use AlternateFunction register */ 518 if ((af.alt_bit1 == UNUSED) && (af.alt_bit2 == UNUSED)) 519 return mode; 520 /* 521 * if pin GPIOSEL bit is set and pin supports alternate function, 522 * it means DEFAULT mode 523 */ 524 if (mode) 525 return ABX500_DEFAULT; 526 527 /* 528 * pin use the AlternatFunction register 529 * read alt_bit1 value 530 */ 531 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, 532 af.alt_bit1, &alt_bit1); 533 if (ret < 0) 534 goto out; 535 536 if (af.alt_bit2 != UNUSED) { 537 /* read alt_bit2 value */ 538 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, 539 af.alt_bit2, 540 &alt_bit2); 541 if (ret < 0) 542 goto out; 543 } else 544 alt_bit2 = 0; 545 546 mode = (alt_bit2 << 1) + alt_bit1; 547 if (mode == af.alta_val) 548 return ABX500_ALT_A; 549 else if (mode == af.altb_val) 550 return ABX500_ALT_B; 551 else 552 return ABX500_ALT_C; 553 554 out: 555 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); 556 return ret; 557 } 558 559 #include <linux/seq_file.h> 560 561 static void abx500_gpio_dbg_show_one(struct seq_file *s, 562 struct pinctrl_dev *pctldev, 563 struct gpio_chip *chip, 564 unsigned offset, unsigned gpio) 565 { 566 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 567 const char *label = gpiochip_is_requested(chip, offset - 1); 568 u8 gpio_offset = offset - 1; 569 int mode = -1; 570 bool is_out; 571 bool pd; 572 enum abx500_gpio_pull_updown pud = 0; 573 int ret; 574 575 const char *modes[] = { 576 [ABX500_DEFAULT] = "default", 577 [ABX500_ALT_A] = "altA", 578 [ABX500_ALT_B] = "altB", 579 [ABX500_ALT_C] = "altC", 580 }; 581 582 const char *pull_up_down[] = { 583 [ABX500_GPIO_PULL_DOWN] = "pull down", 584 [ABX500_GPIO_PULL_NONE] = "pull none", 585 [ABX500_GPIO_PULL_NONE + 1] = "pull none", 586 [ABX500_GPIO_PULL_UP] = "pull up", 587 }; 588 589 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG, 590 gpio_offset, &is_out); 591 if (ret < 0) 592 goto out; 593 594 seq_printf(s, " gpio-%-3d (%-20.20s) %-3s", 595 gpio, label ?: "(none)", 596 is_out ? "out" : "in "); 597 598 if (!is_out) { 599 if (abx500_pullud_supported(chip, offset)) { 600 ret = abx500_get_pull_updown(pct, offset, &pud); 601 if (ret < 0) 602 goto out; 603 604 seq_printf(s, " %-9s", pull_up_down[pud]); 605 } else { 606 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG, 607 gpio_offset, &pd); 608 if (ret < 0) 609 goto out; 610 611 seq_printf(s, " %-9s", pull_up_down[pd]); 612 } 613 } else 614 seq_printf(s, " %-9s", chip->get(chip, offset) ? "hi" : "lo"); 615 616 mode = abx500_get_mode(pctldev, chip, offset); 617 618 seq_printf(s, " %s", (mode < 0) ? "unknown" : modes[mode]); 619 620 out: 621 if (ret < 0) 622 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); 623 } 624 625 static void abx500_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) 626 { 627 unsigned i; 628 unsigned gpio = chip->base; 629 struct abx500_pinctrl *pct = gpiochip_get_data(chip); 630 struct pinctrl_dev *pctldev = pct->pctldev; 631 632 for (i = 0; i < chip->ngpio; i++, gpio++) { 633 /* On AB8500, there is no GPIO0, the first is the GPIO 1 */ 634 abx500_gpio_dbg_show_one(s, pctldev, chip, i + 1, gpio); 635 seq_printf(s, "\n"); 636 } 637 } 638 639 #else 640 static inline void abx500_gpio_dbg_show_one(struct seq_file *s, 641 struct pinctrl_dev *pctldev, 642 struct gpio_chip *chip, 643 unsigned offset, unsigned gpio) 644 { 645 } 646 #define abx500_gpio_dbg_show NULL 647 #endif 648 649 static struct gpio_chip abx500gpio_chip = { 650 .label = "abx500-gpio", 651 .owner = THIS_MODULE, 652 .request = gpiochip_generic_request, 653 .free = gpiochip_generic_free, 654 .direction_input = abx500_gpio_direction_input, 655 .get = abx500_gpio_get, 656 .direction_output = abx500_gpio_direction_output, 657 .set = abx500_gpio_set, 658 .to_irq = abx500_gpio_to_irq, 659 .dbg_show = abx500_gpio_dbg_show, 660 }; 661 662 static int abx500_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev) 663 { 664 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 665 666 return pct->soc->nfunctions; 667 } 668 669 static const char *abx500_pmx_get_func_name(struct pinctrl_dev *pctldev, 670 unsigned function) 671 { 672 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 673 674 return pct->soc->functions[function].name; 675 } 676 677 static int abx500_pmx_get_func_groups(struct pinctrl_dev *pctldev, 678 unsigned function, 679 const char * const **groups, 680 unsigned * const num_groups) 681 { 682 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 683 684 *groups = pct->soc->functions[function].groups; 685 *num_groups = pct->soc->functions[function].ngroups; 686 687 return 0; 688 } 689 690 static int abx500_pmx_set(struct pinctrl_dev *pctldev, unsigned function, 691 unsigned group) 692 { 693 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 694 struct gpio_chip *chip = &pct->chip; 695 const struct abx500_pingroup *g; 696 int i; 697 int ret = 0; 698 699 g = &pct->soc->groups[group]; 700 if (g->altsetting < 0) 701 return -EINVAL; 702 703 dev_dbg(pct->dev, "enable group %s, %u pins\n", g->name, g->npins); 704 705 for (i = 0; i < g->npins; i++) { 706 dev_dbg(pct->dev, "setting pin %d to altsetting %d\n", 707 g->pins[i], g->altsetting); 708 709 ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting); 710 } 711 712 if (ret < 0) 713 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); 714 715 return ret; 716 } 717 718 static int abx500_gpio_request_enable(struct pinctrl_dev *pctldev, 719 struct pinctrl_gpio_range *range, 720 unsigned offset) 721 { 722 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 723 const struct abx500_pinrange *p; 724 int ret; 725 int i; 726 727 /* 728 * Different ranges have different ways to enable GPIO function on a 729 * pin, so refer back to our local range type, where we handily define 730 * what altfunc enables GPIO for a certain pin. 731 */ 732 for (i = 0; i < pct->soc->gpio_num_ranges; i++) { 733 p = &pct->soc->gpio_ranges[i]; 734 if ((offset >= p->offset) && 735 (offset < (p->offset + p->npins))) 736 break; 737 } 738 739 if (i == pct->soc->gpio_num_ranges) { 740 dev_err(pct->dev, "%s failed to locate range\n", __func__); 741 return -ENODEV; 742 } 743 744 dev_dbg(pct->dev, "enable GPIO by altfunc %d at gpio %d\n", 745 p->altfunc, offset); 746 747 ret = abx500_set_mode(pct->pctldev, &pct->chip, 748 offset, p->altfunc); 749 if (ret < 0) 750 dev_err(pct->dev, "%s setting altfunc failed\n", __func__); 751 752 return ret; 753 } 754 755 static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev, 756 struct pinctrl_gpio_range *range, 757 unsigned offset) 758 { 759 } 760 761 static const struct pinmux_ops abx500_pinmux_ops = { 762 .get_functions_count = abx500_pmx_get_funcs_cnt, 763 .get_function_name = abx500_pmx_get_func_name, 764 .get_function_groups = abx500_pmx_get_func_groups, 765 .set_mux = abx500_pmx_set, 766 .gpio_request_enable = abx500_gpio_request_enable, 767 .gpio_disable_free = abx500_gpio_disable_free, 768 }; 769 770 static int abx500_get_groups_cnt(struct pinctrl_dev *pctldev) 771 { 772 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 773 774 return pct->soc->ngroups; 775 } 776 777 static const char *abx500_get_group_name(struct pinctrl_dev *pctldev, 778 unsigned selector) 779 { 780 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 781 782 return pct->soc->groups[selector].name; 783 } 784 785 static int abx500_get_group_pins(struct pinctrl_dev *pctldev, 786 unsigned selector, 787 const unsigned **pins, 788 unsigned *num_pins) 789 { 790 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 791 792 *pins = pct->soc->groups[selector].pins; 793 *num_pins = pct->soc->groups[selector].npins; 794 795 return 0; 796 } 797 798 static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev, 799 struct seq_file *s, unsigned offset) 800 { 801 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 802 struct gpio_chip *chip = &pct->chip; 803 804 abx500_gpio_dbg_show_one(s, pctldev, chip, offset, 805 chip->base + offset - 1); 806 } 807 808 static int abx500_dt_add_map_mux(struct pinctrl_map **map, 809 unsigned *reserved_maps, 810 unsigned *num_maps, const char *group, 811 const char *function) 812 { 813 if (*num_maps == *reserved_maps) 814 return -ENOSPC; 815 816 (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP; 817 (*map)[*num_maps].data.mux.group = group; 818 (*map)[*num_maps].data.mux.function = function; 819 (*num_maps)++; 820 821 return 0; 822 } 823 824 static int abx500_dt_add_map_configs(struct pinctrl_map **map, 825 unsigned *reserved_maps, 826 unsigned *num_maps, const char *group, 827 unsigned long *configs, unsigned num_configs) 828 { 829 unsigned long *dup_configs; 830 831 if (*num_maps == *reserved_maps) 832 return -ENOSPC; 833 834 dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs), 835 GFP_KERNEL); 836 if (!dup_configs) 837 return -ENOMEM; 838 839 (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_PIN; 840 841 (*map)[*num_maps].data.configs.group_or_pin = group; 842 (*map)[*num_maps].data.configs.configs = dup_configs; 843 (*map)[*num_maps].data.configs.num_configs = num_configs; 844 (*num_maps)++; 845 846 return 0; 847 } 848 849 static const char *abx500_find_pin_name(struct pinctrl_dev *pctldev, 850 const char *pin_name) 851 { 852 int i, pin_number; 853 struct abx500_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); 854 855 if (sscanf((char *)pin_name, "GPIO%d", &pin_number) == 1) 856 for (i = 0; i < npct->soc->npins; i++) 857 if (npct->soc->pins[i].number == pin_number) 858 return npct->soc->pins[i].name; 859 return NULL; 860 } 861 862 static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev, 863 struct device_node *np, 864 struct pinctrl_map **map, 865 unsigned *reserved_maps, 866 unsigned *num_maps) 867 { 868 int ret; 869 const char *function = NULL; 870 unsigned long *configs; 871 unsigned int nconfigs = 0; 872 struct property *prop; 873 874 ret = of_property_read_string(np, "function", &function); 875 if (ret >= 0) { 876 const char *group; 877 878 ret = of_property_count_strings(np, "groups"); 879 if (ret < 0) 880 goto exit; 881 882 ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, 883 num_maps, ret); 884 if (ret < 0) 885 goto exit; 886 887 of_property_for_each_string(np, "groups", prop, group) { 888 ret = abx500_dt_add_map_mux(map, reserved_maps, 889 num_maps, group, function); 890 if (ret < 0) 891 goto exit; 892 } 893 } 894 895 ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, &nconfigs); 896 if (nconfigs) { 897 const char *gpio_name; 898 const char *pin; 899 900 ret = of_property_count_strings(np, "pins"); 901 if (ret < 0) 902 goto exit; 903 904 ret = pinctrl_utils_reserve_map(pctldev, map, 905 reserved_maps, 906 num_maps, ret); 907 if (ret < 0) 908 goto exit; 909 910 of_property_for_each_string(np, "pins", prop, pin) { 911 gpio_name = abx500_find_pin_name(pctldev, pin); 912 913 ret = abx500_dt_add_map_configs(map, reserved_maps, 914 num_maps, gpio_name, configs, 1); 915 if (ret < 0) 916 goto exit; 917 } 918 } 919 920 exit: 921 return ret; 922 } 923 924 static int abx500_dt_node_to_map(struct pinctrl_dev *pctldev, 925 struct device_node *np_config, 926 struct pinctrl_map **map, unsigned *num_maps) 927 { 928 unsigned reserved_maps; 929 struct device_node *np; 930 int ret; 931 932 reserved_maps = 0; 933 *map = NULL; 934 *num_maps = 0; 935 936 for_each_child_of_node(np_config, np) { 937 ret = abx500_dt_subnode_to_map(pctldev, np, map, 938 &reserved_maps, num_maps); 939 if (ret < 0) { 940 pinctrl_utils_free_map(pctldev, *map, *num_maps); 941 return ret; 942 } 943 } 944 945 return 0; 946 } 947 948 static const struct pinctrl_ops abx500_pinctrl_ops = { 949 .get_groups_count = abx500_get_groups_cnt, 950 .get_group_name = abx500_get_group_name, 951 .get_group_pins = abx500_get_group_pins, 952 .pin_dbg_show = abx500_pin_dbg_show, 953 .dt_node_to_map = abx500_dt_node_to_map, 954 .dt_free_map = pinctrl_utils_free_map, 955 }; 956 957 static int abx500_pin_config_get(struct pinctrl_dev *pctldev, 958 unsigned pin, 959 unsigned long *config) 960 { 961 return -ENOSYS; 962 } 963 964 static int abx500_pin_config_set(struct pinctrl_dev *pctldev, 965 unsigned pin, 966 unsigned long *configs, 967 unsigned num_configs) 968 { 969 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); 970 struct gpio_chip *chip = &pct->chip; 971 unsigned offset; 972 int ret = -EINVAL; 973 int i; 974 enum pin_config_param param; 975 enum pin_config_param argument; 976 977 for (i = 0; i < num_configs; i++) { 978 param = pinconf_to_config_param(configs[i]); 979 argument = pinconf_to_config_argument(configs[i]); 980 981 dev_dbg(chip->parent, "pin %d [%#lx]: %s %s\n", 982 pin, configs[i], 983 (param == PIN_CONFIG_OUTPUT) ? "output " : "input", 984 (param == PIN_CONFIG_OUTPUT) ? 985 (argument ? "high" : "low") : 986 (argument ? "pull up" : "pull down")); 987 988 /* on ABx500, there is no GPIO0, so adjust the offset */ 989 offset = pin - 1; 990 991 switch (param) { 992 case PIN_CONFIG_BIAS_DISABLE: 993 ret = abx500_gpio_direction_input(chip, offset); 994 if (ret < 0) 995 goto out; 996 /* 997 * Some chips only support pull down, while some 998 * actually support both pull up and pull down. Such 999 * chips have a "pullud" range specified for the pins 1000 * that support both features. If the pin is not 1001 * within that range, we fall back to the old bit set 1002 * that only support pull down. 1003 */ 1004 if (abx500_pullud_supported(chip, pin)) 1005 ret = abx500_set_pull_updown(pct, 1006 pin, 1007 ABX500_GPIO_PULL_NONE); 1008 else 1009 /* Chip only supports pull down */ 1010 ret = abx500_gpio_set_bits(chip, 1011 AB8500_GPIO_PUD1_REG, offset, 1012 ABX500_GPIO_PULL_NONE); 1013 break; 1014 1015 case PIN_CONFIG_BIAS_PULL_DOWN: 1016 ret = abx500_gpio_direction_input(chip, offset); 1017 if (ret < 0) 1018 goto out; 1019 /* 1020 * if argument = 1 set the pull down 1021 * else clear the pull down 1022 * Some chips only support pull down, while some 1023 * actually support both pull up and pull down. Such 1024 * chips have a "pullud" range specified for the pins 1025 * that support both features. If the pin is not 1026 * within that range, we fall back to the old bit set 1027 * that only support pull down. 1028 */ 1029 if (abx500_pullud_supported(chip, pin)) 1030 ret = abx500_set_pull_updown(pct, 1031 pin, 1032 argument ? ABX500_GPIO_PULL_DOWN : 1033 ABX500_GPIO_PULL_NONE); 1034 else 1035 /* Chip only supports pull down */ 1036 ret = abx500_gpio_set_bits(chip, 1037 AB8500_GPIO_PUD1_REG, 1038 offset, 1039 argument ? ABX500_GPIO_PULL_DOWN : 1040 ABX500_GPIO_PULL_NONE); 1041 break; 1042 1043 case PIN_CONFIG_BIAS_PULL_UP: 1044 ret = abx500_gpio_direction_input(chip, offset); 1045 if (ret < 0) 1046 goto out; 1047 /* 1048 * if argument = 1 set the pull up 1049 * else clear the pull up 1050 */ 1051 ret = abx500_gpio_direction_input(chip, offset); 1052 /* 1053 * Some chips only support pull down, while some 1054 * actually support both pull up and pull down. Such 1055 * chips have a "pullud" range specified for the pins 1056 * that support both features. If the pin is not 1057 * within that range, do nothing 1058 */ 1059 if (abx500_pullud_supported(chip, pin)) 1060 ret = abx500_set_pull_updown(pct, 1061 pin, 1062 argument ? ABX500_GPIO_PULL_UP : 1063 ABX500_GPIO_PULL_NONE); 1064 break; 1065 1066 case PIN_CONFIG_OUTPUT: 1067 ret = abx500_gpio_direction_output(chip, offset, 1068 argument); 1069 break; 1070 1071 default: 1072 dev_err(chip->parent, 1073 "illegal configuration requested\n"); 1074 } 1075 } /* for each config */ 1076 out: 1077 if (ret < 0) 1078 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); 1079 1080 return ret; 1081 } 1082 1083 static const struct pinconf_ops abx500_pinconf_ops = { 1084 .pin_config_get = abx500_pin_config_get, 1085 .pin_config_set = abx500_pin_config_set, 1086 .is_generic = true, 1087 }; 1088 1089 static struct pinctrl_desc abx500_pinctrl_desc = { 1090 .name = "pinctrl-abx500", 1091 .pctlops = &abx500_pinctrl_ops, 1092 .pmxops = &abx500_pinmux_ops, 1093 .confops = &abx500_pinconf_ops, 1094 .owner = THIS_MODULE, 1095 }; 1096 1097 static int abx500_get_gpio_num(struct abx500_pinctrl_soc_data *soc) 1098 { 1099 unsigned int lowest = 0; 1100 unsigned int highest = 0; 1101 unsigned int npins = 0; 1102 int i; 1103 1104 /* 1105 * Compute number of GPIOs from the last SoC gpio range descriptors 1106 * These ranges may include "holes" but the GPIO number space shall 1107 * still be homogeneous, so we need to detect and account for any 1108 * such holes so that these are included in the number of GPIO pins. 1109 */ 1110 for (i = 0; i < soc->gpio_num_ranges; i++) { 1111 unsigned gstart; 1112 unsigned gend; 1113 const struct abx500_pinrange *p; 1114 1115 p = &soc->gpio_ranges[i]; 1116 gstart = p->offset; 1117 gend = p->offset + p->npins - 1; 1118 1119 if (i == 0) { 1120 /* First iteration, set start values */ 1121 lowest = gstart; 1122 highest = gend; 1123 } else { 1124 if (gstart < lowest) 1125 lowest = gstart; 1126 if (gend > highest) 1127 highest = gend; 1128 } 1129 } 1130 /* this gives the absolute number of pins */ 1131 npins = highest - lowest + 1; 1132 return npins; 1133 } 1134 1135 static const struct of_device_id abx500_gpio_match[] = { 1136 { .compatible = "stericsson,ab8500-gpio", .data = (void *)PINCTRL_AB8500, }, 1137 { .compatible = "stericsson,ab8505-gpio", .data = (void *)PINCTRL_AB8505, }, 1138 { .compatible = "stericsson,ab8540-gpio", .data = (void *)PINCTRL_AB8540, }, 1139 { .compatible = "stericsson,ab9540-gpio", .data = (void *)PINCTRL_AB9540, }, 1140 { } 1141 }; 1142 1143 static int abx500_gpio_probe(struct platform_device *pdev) 1144 { 1145 struct device_node *np = pdev->dev.of_node; 1146 const struct of_device_id *match; 1147 struct abx500_pinctrl *pct; 1148 unsigned int id = -1; 1149 int ret; 1150 int i; 1151 1152 if (!np) { 1153 dev_err(&pdev->dev, "gpio dt node missing\n"); 1154 return -ENODEV; 1155 } 1156 1157 pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl), 1158 GFP_KERNEL); 1159 if (pct == NULL) { 1160 dev_err(&pdev->dev, 1161 "failed to allocate memory for pct\n"); 1162 return -ENOMEM; 1163 } 1164 1165 pct->dev = &pdev->dev; 1166 pct->parent = dev_get_drvdata(pdev->dev.parent); 1167 pct->chip = abx500gpio_chip; 1168 pct->chip.parent = &pdev->dev; 1169 pct->chip.base = -1; /* Dynamic allocation */ 1170 1171 match = of_match_device(abx500_gpio_match, &pdev->dev); 1172 if (!match) { 1173 dev_err(&pdev->dev, "gpio dt not matching\n"); 1174 return -ENODEV; 1175 } 1176 id = (unsigned long)match->data; 1177 1178 /* Poke in other ASIC variants here */ 1179 switch (id) { 1180 case PINCTRL_AB8500: 1181 abx500_pinctrl_ab8500_init(&pct->soc); 1182 break; 1183 case PINCTRL_AB8540: 1184 abx500_pinctrl_ab8540_init(&pct->soc); 1185 break; 1186 case PINCTRL_AB9540: 1187 abx500_pinctrl_ab9540_init(&pct->soc); 1188 break; 1189 case PINCTRL_AB8505: 1190 abx500_pinctrl_ab8505_init(&pct->soc); 1191 break; 1192 default: 1193 dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", id); 1194 return -EINVAL; 1195 } 1196 1197 if (!pct->soc) { 1198 dev_err(&pdev->dev, "Invalid SOC data\n"); 1199 return -EINVAL; 1200 } 1201 1202 pct->chip.ngpio = abx500_get_gpio_num(pct->soc); 1203 pct->irq_cluster = pct->soc->gpio_irq_cluster; 1204 pct->irq_cluster_size = pct->soc->ngpio_irq_cluster; 1205 1206 ret = gpiochip_add_data(&pct->chip, pct); 1207 if (ret) { 1208 dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); 1209 return ret; 1210 } 1211 dev_info(&pdev->dev, "added gpiochip\n"); 1212 1213 abx500_pinctrl_desc.pins = pct->soc->pins; 1214 abx500_pinctrl_desc.npins = pct->soc->npins; 1215 pct->pctldev = devm_pinctrl_register(&pdev->dev, &abx500_pinctrl_desc, 1216 pct); 1217 if (IS_ERR(pct->pctldev)) { 1218 dev_err(&pdev->dev, 1219 "could not register abx500 pinctrl driver\n"); 1220 ret = PTR_ERR(pct->pctldev); 1221 goto out_rem_chip; 1222 } 1223 dev_info(&pdev->dev, "registered pin controller\n"); 1224 1225 /* We will handle a range of GPIO pins */ 1226 for (i = 0; i < pct->soc->gpio_num_ranges; i++) { 1227 const struct abx500_pinrange *p = &pct->soc->gpio_ranges[i]; 1228 1229 ret = gpiochip_add_pin_range(&pct->chip, 1230 dev_name(&pdev->dev), 1231 p->offset - 1, p->offset, p->npins); 1232 if (ret < 0) 1233 goto out_rem_chip; 1234 } 1235 1236 platform_set_drvdata(pdev, pct); 1237 dev_info(&pdev->dev, "initialized abx500 pinctrl driver\n"); 1238 1239 return 0; 1240 1241 out_rem_chip: 1242 gpiochip_remove(&pct->chip); 1243 return ret; 1244 } 1245 1246 /** 1247 * abx500_gpio_remove() - remove Ab8500-gpio driver 1248 * @pdev: Platform device registered 1249 */ 1250 static int abx500_gpio_remove(struct platform_device *pdev) 1251 { 1252 struct abx500_pinctrl *pct = platform_get_drvdata(pdev); 1253 1254 gpiochip_remove(&pct->chip); 1255 return 0; 1256 } 1257 1258 static struct platform_driver abx500_gpio_driver = { 1259 .driver = { 1260 .name = "abx500-gpio", 1261 .of_match_table = abx500_gpio_match, 1262 }, 1263 .probe = abx500_gpio_probe, 1264 .remove = abx500_gpio_remove, 1265 }; 1266 1267 static int __init abx500_gpio_init(void) 1268 { 1269 return platform_driver_register(&abx500_gpio_driver); 1270 } 1271 core_initcall(abx500_gpio_init); 1272 1273 MODULE_AUTHOR("Patrice Chotard <patrice.chotard@st.com>"); 1274 MODULE_DESCRIPTION("Driver allows to use AxB5xx unused pins to be used as GPIO"); 1275 MODULE_ALIAS("platform:abx500-gpio"); 1276 MODULE_LICENSE("GPL v2"); 1277