1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Core pinctrl/GPIO driver for Intel GPIO controllers 4 * 5 * Copyright (C) 2015, Intel Corporation 6 * Authors: Mathias Nyman <mathias.nyman@linux.intel.com> 7 * Mika Westerberg <mika.westerberg@linux.intel.com> 8 */ 9 10 #ifndef PINCTRL_INTEL_H 11 #define PINCTRL_INTEL_H 12 13 #include <linux/pm.h> 14 15 struct pinctrl_pin_desc; 16 struct platform_device; 17 struct device; 18 19 /** 20 * struct intel_pingroup - Description about group of pins 21 * @name: Name of the groups 22 * @pins: All pins in this group 23 * @npins: Number of pins in this groups 24 * @mode: Native mode in which the group is muxed out @pins. Used if @modes 25 * is %NULL. 26 * @modes: If not %NULL this will hold mode for each pin in @pins 27 */ 28 struct intel_pingroup { 29 const char *name; 30 const unsigned int *pins; 31 size_t npins; 32 unsigned short mode; 33 const unsigned int *modes; 34 }; 35 36 /** 37 * struct intel_function - Description about a function 38 * @name: Name of the function 39 * @groups: An array of groups for this function 40 * @ngroups: Number of groups in @groups 41 */ 42 struct intel_function { 43 const char *name; 44 const char * const *groups; 45 size_t ngroups; 46 }; 47 48 /** 49 * struct intel_padgroup - Hardware pad group information 50 * @reg_num: GPI_IS register number 51 * @base: Starting pin of this group 52 * @size: Size of this group (maximum is 32). 53 * @gpio_base: Starting GPIO base of this group (%0 if matches with @base, 54 * and %-1 if no GPIO mapping should be created) 55 * @padown_num: PAD_OWN register number (assigned by the core driver) 56 * 57 * If pad groups of a community are not the same size, use this structure 58 * to specify them. 59 */ 60 struct intel_padgroup { 61 unsigned int reg_num; 62 unsigned int base; 63 unsigned int size; 64 int gpio_base; 65 unsigned int padown_num; 66 }; 67 68 /** 69 * struct intel_community - Intel pin community description 70 * @barno: MMIO BAR number where registers for this community reside 71 * @padown_offset: Register offset of PAD_OWN register from @regs. If %0 72 * then there is no support for owner. 73 * @padcfglock_offset: Register offset of PADCFGLOCK from @regs. If %0 then 74 * locking is not supported. 75 * @hostown_offset: Register offset of HOSTSW_OWN from @regs. If %0 then it 76 * is assumed that the host owns the pin (rather than 77 * ACPI). 78 * @is_offset: Register offset of GPI_IS from @regs. If %0 then uses the 79 * default (%0x100). 80 * @ie_offset: Register offset of GPI_IE from @regs. 81 * @pin_base: Starting pin of pins in this community 82 * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK, 83 * HOSTSW_OWN, GPI_IS, GPI_IE, etc. Used when @gpps is %NULL. 84 * @gpp_num_padown_regs: Number of pad registers each pad group consumes at 85 * minimum. Use %0 if the number of registers can be 86 * determined by the size of the group. 87 * @npins: Number of pins in this community 88 * @features: Additional features supported by the hardware 89 * @gpps: Pad groups if the controller has variable size pad groups 90 * @ngpps: Number of pad groups in this community 91 * @regs: Community specific common registers (reserved for core driver) 92 * @pad_regs: Community specific pad registers (reserved for core driver) 93 * 94 * Most Intel GPIO host controllers this driver supports each pad group is 95 * of equal size (except the last one). In that case the driver can just 96 * fill in @gpp_size field and let the core driver to handle the rest. If 97 * the controller has pad groups of variable size the client driver can 98 * pass custom @gpps and @ngpps instead. 99 */ 100 struct intel_community { 101 unsigned int barno; 102 unsigned int padown_offset; 103 unsigned int padcfglock_offset; 104 unsigned int hostown_offset; 105 unsigned int is_offset; 106 unsigned int ie_offset; 107 unsigned int pin_base; 108 unsigned int gpp_size; 109 unsigned int gpp_num_padown_regs; 110 size_t npins; 111 unsigned int features; 112 const struct intel_padgroup *gpps; 113 size_t ngpps; 114 /* Reserved for the core driver */ 115 void __iomem *regs; 116 void __iomem *pad_regs; 117 }; 118 119 /* Additional features supported by the hardware */ 120 #define PINCTRL_FEATURE_DEBOUNCE BIT(0) 121 #define PINCTRL_FEATURE_1K_PD BIT(1) 122 123 /** 124 * PIN_GROUP - Declare a pin group 125 * @n: Name of the group 126 * @p: An array of pins this group consists 127 * @m: Mode which the pins are put when this group is active. Can be either 128 * a single integer or an array of integers in which case mode is per 129 * pin. 130 */ 131 #define PIN_GROUP(n, p, m) \ 132 { \ 133 .name = (n), \ 134 .pins = (p), \ 135 .npins = ARRAY_SIZE((p)), \ 136 .mode = __builtin_choose_expr( \ 137 __builtin_constant_p((m)), (m), 0), \ 138 .modes = __builtin_choose_expr( \ 139 __builtin_constant_p((m)), NULL, (m)), \ 140 } 141 142 #define FUNCTION(n, g) \ 143 { \ 144 .name = (n), \ 145 .groups = (g), \ 146 .ngroups = ARRAY_SIZE((g)), \ 147 } 148 149 /** 150 * struct intel_pinctrl_soc_data - Intel pin controller per-SoC configuration 151 * @uid: ACPI _UID for the probe driver use if needed 152 * @pins: Array if pins this pinctrl controls 153 * @npins: Number of pins in the array 154 * @groups: Array of pin groups 155 * @ngroups: Number of groups in the array 156 * @functions: Array of functions 157 * @nfunctions: Number of functions in the array 158 * @communities: Array of communities this pinctrl handles 159 * @ncommunities: Number of communities in the array 160 * 161 * The @communities is used as a template by the core driver. It will make 162 * copy of all communities and fill in rest of the information. 163 */ 164 struct intel_pinctrl_soc_data { 165 const char *uid; 166 const struct pinctrl_pin_desc *pins; 167 size_t npins; 168 const struct intel_pingroup *groups; 169 size_t ngroups; 170 const struct intel_function *functions; 171 size_t nfunctions; 172 const struct intel_community *communities; 173 size_t ncommunities; 174 }; 175 176 int intel_pinctrl_probe_by_hid(struct platform_device *pdev); 177 int intel_pinctrl_probe_by_uid(struct platform_device *pdev); 178 179 #ifdef CONFIG_PM_SLEEP 180 int intel_pinctrl_suspend(struct device *dev); 181 int intel_pinctrl_resume(struct device *dev); 182 #endif 183 184 #define INTEL_PINCTRL_PM_OPS(_name) \ 185 const struct dev_pm_ops _name = { \ 186 SET_LATE_SYSTEM_SLEEP_PM_OPS(intel_pinctrl_suspend, intel_pinctrl_resume) \ 187 } 188 189 #endif /* PINCTRL_INTEL_H */ 190