1 /* 2 * Core pinctrl/GPIO driver for Intel GPIO controllers 3 * 4 * Copyright (C) 2015, Intel Corporation 5 * Authors: Mathias Nyman <mathias.nyman@linux.intel.com> 6 * Mika Westerberg <mika.westerberg@linux.intel.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 */ 12 13 #ifndef PINCTRL_INTEL_H 14 #define PINCTRL_INTEL_H 15 16 struct pinctrl_pin_desc; 17 struct platform_device; 18 struct device; 19 20 /** 21 * struct intel_pingroup - Description about group of pins 22 * @name: Name of the groups 23 * @pins: All pins in this group 24 * @npins: Number of pins in this groups 25 * @mode: Native mode in which the group is muxed out @pins. Used if @modes 26 * is %NULL. 27 * @modes: If not %NULL this will hold mode for each pin in @pins 28 */ 29 struct intel_pingroup { 30 const char *name; 31 const unsigned *pins; 32 size_t npins; 33 unsigned short mode; 34 const unsigned *modes; 35 }; 36 37 /** 38 * struct intel_function - Description about a function 39 * @name: Name of the function 40 * @groups: An array of groups for this function 41 * @ngroups: Number of groups in @groups 42 */ 43 struct intel_function { 44 const char *name; 45 const char * const *groups; 46 size_t ngroups; 47 }; 48 49 /** 50 * struct intel_padgroup - Hardware pad group information 51 * @reg_num: GPI_IS register number 52 * @base: Starting pin of this group 53 * @size: Size of this group (maximum is 32). 54 * @padown_num: PAD_OWN register number (assigned by the core driver) 55 * 56 * If pad groups of a community are not the same size, use this structure 57 * to specify them. 58 */ 59 struct intel_padgroup { 60 unsigned reg_num; 61 unsigned base; 62 unsigned size; 63 unsigned padown_num; 64 }; 65 66 /** 67 * struct intel_community - Intel pin community description 68 * @barno: MMIO BAR number where registers for this community reside 69 * @padown_offset: Register offset of PAD_OWN register from @regs. If %0 70 * then there is no support for owner. 71 * @padcfglock_offset: Register offset of PADCFGLOCK from @regs. If %0 then 72 * locking is not supported. 73 * @hostown_offset: Register offset of HOSTSW_OWN from @regs. If %0 then it 74 * is assumed that the host owns the pin (rather than 75 * ACPI). 76 * @is_offset: Register offset of GPI_IS from @regs. If %0 then uses the 77 * default (%0x100). 78 * @ie_offset: Register offset of GPI_IE from @regs. 79 * @pin_base: Starting pin of pins in this community 80 * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK, 81 * HOSTSW_OWN, GPI_IS, GPI_IE, etc. Used when @gpps is %NULL. 82 * @gpp_num_padown_regs: Number of pad registers each pad group consumes at 83 * minimum. Use %0 if the number of registers can be 84 * determined by the size of the group. 85 * @npins: Number of pins in this community 86 * @features: Additional features supported by the hardware 87 * @gpps: Pad groups if the controller has variable size pad groups 88 * @ngpps: Number of pad groups in this community 89 * @regs: Community specific common registers (reserved for core driver) 90 * @pad_regs: Community specific pad registers (reserved for core driver) 91 * 92 * Most Intel GPIO host controllers this driver supports each pad group is 93 * of equal size (except the last one). In that case the driver can just 94 * fill in @gpp_size field and let the core driver to handle the rest. If 95 * the controller has pad groups of variable size the client driver can 96 * pass custom @gpps and @ngpps instead. 97 */ 98 struct intel_community { 99 unsigned barno; 100 unsigned padown_offset; 101 unsigned padcfglock_offset; 102 unsigned hostown_offset; 103 unsigned is_offset; 104 unsigned ie_offset; 105 unsigned pin_base; 106 unsigned gpp_size; 107 unsigned gpp_num_padown_regs; 108 size_t npins; 109 unsigned features; 110 const struct intel_padgroup *gpps; 111 size_t ngpps; 112 /* Reserved for the core driver */ 113 void __iomem *regs; 114 void __iomem *pad_regs; 115 }; 116 117 /* Additional features supported by the hardware */ 118 #define PINCTRL_FEATURE_DEBOUNCE BIT(0) 119 #define PINCTRL_FEATURE_1K_PD BIT(1) 120 121 /** 122 * PIN_GROUP - Declare a pin group 123 * @n: Name of the group 124 * @p: An array of pins this group consists 125 * @m: Mode which the pins are put when this group is active. Can be either 126 * a single integer or an array of integers in which case mode is per 127 * pin. 128 */ 129 #define PIN_GROUP(n, p, m) \ 130 { \ 131 .name = (n), \ 132 .pins = (p), \ 133 .npins = ARRAY_SIZE((p)), \ 134 .mode = __builtin_choose_expr( \ 135 __builtin_constant_p((m)), (m), 0), \ 136 .modes = __builtin_choose_expr( \ 137 __builtin_constant_p((m)), NULL, (m)), \ 138 } 139 140 #define FUNCTION(n, g) \ 141 { \ 142 .name = (n), \ 143 .groups = (g), \ 144 .ngroups = ARRAY_SIZE((g)), \ 145 } 146 147 /** 148 * struct intel_pinctrl_soc_data - Intel pin controller per-SoC configuration 149 * @uid: ACPI _UID for the probe driver use if needed 150 * @pins: Array if pins this pinctrl controls 151 * @npins: Number of pins in the array 152 * @groups: Array of pin groups 153 * @ngroups: Number of groups in the array 154 * @functions: Array of functions 155 * @nfunctions: Number of functions in the array 156 * @communities: Array of communities this pinctrl handles 157 * @ncommunities: Number of communities in the array 158 * 159 * The @communities is used as a template by the core driver. It will make 160 * copy of all communities and fill in rest of the information. 161 */ 162 struct intel_pinctrl_soc_data { 163 const char *uid; 164 const struct pinctrl_pin_desc *pins; 165 size_t npins; 166 const struct intel_pingroup *groups; 167 size_t ngroups; 168 const struct intel_function *functions; 169 size_t nfunctions; 170 const struct intel_community *communities; 171 size_t ncommunities; 172 }; 173 174 int intel_pinctrl_probe(struct platform_device *pdev, 175 const struct intel_pinctrl_soc_data *soc_data); 176 #ifdef CONFIG_PM_SLEEP 177 int intel_pinctrl_suspend(struct device *dev); 178 int intel_pinctrl_resume(struct device *dev); 179 #endif 180 181 #endif /* PINCTRL_INTEL_H */ 182