1 /* 2 * Copyright (C) 2014-2015 Broadcom Corporation 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation version 2. 7 * 8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 9 * kind, whether express or implied; without even the implied warranty 10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 * 13 * This file contains the Broadcom Iproc GPIO driver that supports 3 14 * GPIO controllers on Iproc including the ASIU GPIO controller, the 15 * chipCommonG GPIO controller, and the always-on GPIO controller. Basic 16 * PINCONF such as bias pull up/down, and drive strength are also supported 17 * in this driver. 18 * 19 * It provides the functionality where pins from the GPIO can be 20 * individually muxed to GPIO function, if individual pad 21 * configuration is supported, through the interaction with respective 22 * SoCs IOMUX controller. 23 */ 24 25 #include <linux/kernel.h> 26 #include <linux/slab.h> 27 #include <linux/interrupt.h> 28 #include <linux/io.h> 29 #include <linux/gpio/driver.h> 30 #include <linux/ioport.h> 31 #include <linux/of_device.h> 32 #include <linux/of_irq.h> 33 #include <linux/pinctrl/pinctrl.h> 34 #include <linux/pinctrl/pinconf.h> 35 #include <linux/pinctrl/pinconf-generic.h> 36 37 #include "../pinctrl-utils.h" 38 39 #define IPROC_GPIO_DATA_IN_OFFSET 0x00 40 #define IPROC_GPIO_DATA_OUT_OFFSET 0x04 41 #define IPROC_GPIO_OUT_EN_OFFSET 0x08 42 #define IPROC_GPIO_INT_TYPE_OFFSET 0x0c 43 #define IPROC_GPIO_INT_DE_OFFSET 0x10 44 #define IPROC_GPIO_INT_EDGE_OFFSET 0x14 45 #define IPROC_GPIO_INT_MSK_OFFSET 0x18 46 #define IPROC_GPIO_INT_STAT_OFFSET 0x1c 47 #define IPROC_GPIO_INT_MSTAT_OFFSET 0x20 48 #define IPROC_GPIO_INT_CLR_OFFSET 0x24 49 #define IPROC_GPIO_PAD_RES_OFFSET 0x34 50 #define IPROC_GPIO_RES_EN_OFFSET 0x38 51 52 /* drive strength control for ASIU GPIO */ 53 #define IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58 54 55 /* drive strength control for CCM/CRMU (AON) GPIO */ 56 #define IPROC_GPIO_DRV0_CTRL_OFFSET 0x00 57 58 #define GPIO_BANK_SIZE 0x200 59 #define NGPIOS_PER_BANK 32 60 #define GPIO_BANK(pin) ((pin) / NGPIOS_PER_BANK) 61 62 #define IPROC_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg)) 63 #define IPROC_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK) 64 65 #define GPIO_DRV_STRENGTH_BIT_SHIFT 20 66 #define GPIO_DRV_STRENGTH_BITS 3 67 #define GPIO_DRV_STRENGTH_BIT_MASK ((1 << GPIO_DRV_STRENGTH_BITS) - 1) 68 69 enum iproc_pinconf_param { 70 IPROC_PINCONF_DRIVE_STRENGTH = 0, 71 IPROC_PINCONF_BIAS_DISABLE, 72 IPROC_PINCONF_BIAS_PULL_UP, 73 IPROC_PINCONF_BIAS_PULL_DOWN, 74 IPROC_PINCON_MAX, 75 }; 76 77 /* 78 * Iproc GPIO core 79 * 80 * @dev: pointer to device 81 * @base: I/O register base for Iproc GPIO controller 82 * @io_ctrl: I/O register base for certain type of Iproc GPIO controller that 83 * has the PINCONF support implemented outside of the GPIO block 84 * @lock: lock to protect access to I/O registers 85 * @gc: GPIO chip 86 * @num_banks: number of GPIO banks, each bank supports up to 32 GPIOs 87 * @pinmux_is_supported: flag to indicate this GPIO controller contains pins 88 * that can be individually muxed to GPIO 89 * @pinconf_disable: contains a list of PINCONF parameters that need to be 90 * disabled 91 * @nr_pinconf_disable: total number of PINCONF parameters that need to be 92 * disabled 93 * @pctl: pointer to pinctrl_dev 94 * @pctldesc: pinctrl descriptor 95 */ 96 struct iproc_gpio { 97 struct device *dev; 98 99 void __iomem *base; 100 void __iomem *io_ctrl; 101 102 spinlock_t lock; 103 104 struct gpio_chip gc; 105 unsigned num_banks; 106 107 bool pinmux_is_supported; 108 109 enum pin_config_param *pinconf_disable; 110 unsigned int nr_pinconf_disable; 111 112 struct pinctrl_dev *pctl; 113 struct pinctrl_desc pctldesc; 114 }; 115 116 /* 117 * Mapping from PINCONF pins to GPIO pins is 1-to-1 118 */ 119 static inline unsigned iproc_pin_to_gpio(unsigned pin) 120 { 121 return pin; 122 } 123 124 /** 125 * iproc_set_bit - set or clear one bit (corresponding to the GPIO pin) in a 126 * Iproc GPIO register 127 * 128 * @iproc_gpio: Iproc GPIO device 129 * @reg: register offset 130 * @gpio: GPIO pin 131 * @set: set or clear 132 */ 133 static inline void iproc_set_bit(struct iproc_gpio *chip, unsigned int reg, 134 unsigned gpio, bool set) 135 { 136 unsigned int offset = IPROC_GPIO_REG(gpio, reg); 137 unsigned int shift = IPROC_GPIO_SHIFT(gpio); 138 u32 val; 139 140 val = readl(chip->base + offset); 141 if (set) 142 val |= BIT(shift); 143 else 144 val &= ~BIT(shift); 145 writel(val, chip->base + offset); 146 } 147 148 static inline bool iproc_get_bit(struct iproc_gpio *chip, unsigned int reg, 149 unsigned gpio) 150 { 151 unsigned int offset = IPROC_GPIO_REG(gpio, reg); 152 unsigned int shift = IPROC_GPIO_SHIFT(gpio); 153 154 return !!(readl(chip->base + offset) & BIT(shift)); 155 } 156 157 static void iproc_gpio_irq_handler(struct irq_desc *desc) 158 { 159 struct gpio_chip *gc = irq_desc_get_handler_data(desc); 160 struct iproc_gpio *chip = gpiochip_get_data(gc); 161 struct irq_chip *irq_chip = irq_desc_get_chip(desc); 162 int i, bit; 163 164 chained_irq_enter(irq_chip, desc); 165 166 /* go through the entire GPIO banks and handle all interrupts */ 167 for (i = 0; i < chip->num_banks; i++) { 168 unsigned long val = readl(chip->base + (i * GPIO_BANK_SIZE) + 169 IPROC_GPIO_INT_MSTAT_OFFSET); 170 171 for_each_set_bit(bit, &val, NGPIOS_PER_BANK) { 172 unsigned pin = NGPIOS_PER_BANK * i + bit; 173 int child_irq = irq_find_mapping(gc->irqdomain, pin); 174 175 /* 176 * Clear the interrupt before invoking the 177 * handler, so we do not leave any window 178 */ 179 writel(BIT(bit), chip->base + (i * GPIO_BANK_SIZE) + 180 IPROC_GPIO_INT_CLR_OFFSET); 181 182 generic_handle_irq(child_irq); 183 } 184 } 185 186 chained_irq_exit(irq_chip, desc); 187 } 188 189 190 static void iproc_gpio_irq_ack(struct irq_data *d) 191 { 192 struct gpio_chip *gc = irq_data_get_irq_chip_data(d); 193 struct iproc_gpio *chip = gpiochip_get_data(gc); 194 unsigned gpio = d->hwirq; 195 unsigned int offset = IPROC_GPIO_REG(gpio, 196 IPROC_GPIO_INT_CLR_OFFSET); 197 unsigned int shift = IPROC_GPIO_SHIFT(gpio); 198 u32 val = BIT(shift); 199 200 writel(val, chip->base + offset); 201 } 202 203 /** 204 * iproc_gpio_irq_set_mask - mask/unmask a GPIO interrupt 205 * 206 * @d: IRQ chip data 207 * @unmask: mask/unmask GPIO interrupt 208 */ 209 static void iproc_gpio_irq_set_mask(struct irq_data *d, bool unmask) 210 { 211 struct gpio_chip *gc = irq_data_get_irq_chip_data(d); 212 struct iproc_gpio *chip = gpiochip_get_data(gc); 213 unsigned gpio = d->hwirq; 214 215 iproc_set_bit(chip, IPROC_GPIO_INT_MSK_OFFSET, gpio, unmask); 216 } 217 218 static void iproc_gpio_irq_mask(struct irq_data *d) 219 { 220 struct gpio_chip *gc = irq_data_get_irq_chip_data(d); 221 struct iproc_gpio *chip = gpiochip_get_data(gc); 222 unsigned long flags; 223 224 spin_lock_irqsave(&chip->lock, flags); 225 iproc_gpio_irq_set_mask(d, false); 226 spin_unlock_irqrestore(&chip->lock, flags); 227 } 228 229 static void iproc_gpio_irq_unmask(struct irq_data *d) 230 { 231 struct gpio_chip *gc = irq_data_get_irq_chip_data(d); 232 struct iproc_gpio *chip = gpiochip_get_data(gc); 233 unsigned long flags; 234 235 spin_lock_irqsave(&chip->lock, flags); 236 iproc_gpio_irq_set_mask(d, true); 237 spin_unlock_irqrestore(&chip->lock, flags); 238 } 239 240 static int iproc_gpio_irq_set_type(struct irq_data *d, unsigned int type) 241 { 242 struct gpio_chip *gc = irq_data_get_irq_chip_data(d); 243 struct iproc_gpio *chip = gpiochip_get_data(gc); 244 unsigned gpio = d->hwirq; 245 bool level_triggered = false; 246 bool dual_edge = false; 247 bool rising_or_high = false; 248 unsigned long flags; 249 250 switch (type & IRQ_TYPE_SENSE_MASK) { 251 case IRQ_TYPE_EDGE_RISING: 252 rising_or_high = true; 253 break; 254 255 case IRQ_TYPE_EDGE_FALLING: 256 break; 257 258 case IRQ_TYPE_EDGE_BOTH: 259 dual_edge = true; 260 break; 261 262 case IRQ_TYPE_LEVEL_HIGH: 263 level_triggered = true; 264 rising_or_high = true; 265 break; 266 267 case IRQ_TYPE_LEVEL_LOW: 268 level_triggered = true; 269 break; 270 271 default: 272 dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n", 273 type); 274 return -EINVAL; 275 } 276 277 spin_lock_irqsave(&chip->lock, flags); 278 iproc_set_bit(chip, IPROC_GPIO_INT_TYPE_OFFSET, gpio, 279 level_triggered); 280 iproc_set_bit(chip, IPROC_GPIO_INT_DE_OFFSET, gpio, dual_edge); 281 iproc_set_bit(chip, IPROC_GPIO_INT_EDGE_OFFSET, gpio, 282 rising_or_high); 283 spin_unlock_irqrestore(&chip->lock, flags); 284 285 dev_dbg(chip->dev, 286 "gpio:%u level_triggered:%d dual_edge:%d rising_or_high:%d\n", 287 gpio, level_triggered, dual_edge, rising_or_high); 288 289 return 0; 290 } 291 292 static struct irq_chip iproc_gpio_irq_chip = { 293 .name = "bcm-iproc-gpio", 294 .irq_ack = iproc_gpio_irq_ack, 295 .irq_mask = iproc_gpio_irq_mask, 296 .irq_unmask = iproc_gpio_irq_unmask, 297 .irq_set_type = iproc_gpio_irq_set_type, 298 }; 299 300 /* 301 * Request the Iproc IOMUX pinmux controller to mux individual pins to GPIO 302 */ 303 static int iproc_gpio_request(struct gpio_chip *gc, unsigned offset) 304 { 305 struct iproc_gpio *chip = gpiochip_get_data(gc); 306 unsigned gpio = gc->base + offset; 307 308 /* not all Iproc GPIO pins can be muxed individually */ 309 if (!chip->pinmux_is_supported) 310 return 0; 311 312 return pinctrl_request_gpio(gpio); 313 } 314 315 static void iproc_gpio_free(struct gpio_chip *gc, unsigned offset) 316 { 317 struct iproc_gpio *chip = gpiochip_get_data(gc); 318 unsigned gpio = gc->base + offset; 319 320 if (!chip->pinmux_is_supported) 321 return; 322 323 pinctrl_free_gpio(gpio); 324 } 325 326 static int iproc_gpio_direction_input(struct gpio_chip *gc, unsigned gpio) 327 { 328 struct iproc_gpio *chip = gpiochip_get_data(gc); 329 unsigned long flags; 330 331 spin_lock_irqsave(&chip->lock, flags); 332 iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, false); 333 spin_unlock_irqrestore(&chip->lock, flags); 334 335 dev_dbg(chip->dev, "gpio:%u set input\n", gpio); 336 337 return 0; 338 } 339 340 static int iproc_gpio_direction_output(struct gpio_chip *gc, unsigned gpio, 341 int val) 342 { 343 struct iproc_gpio *chip = gpiochip_get_data(gc); 344 unsigned long flags; 345 346 spin_lock_irqsave(&chip->lock, flags); 347 iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, true); 348 iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val)); 349 spin_unlock_irqrestore(&chip->lock, flags); 350 351 dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val); 352 353 return 0; 354 } 355 356 static void iproc_gpio_set(struct gpio_chip *gc, unsigned gpio, int val) 357 { 358 struct iproc_gpio *chip = gpiochip_get_data(gc); 359 unsigned long flags; 360 361 spin_lock_irqsave(&chip->lock, flags); 362 iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val)); 363 spin_unlock_irqrestore(&chip->lock, flags); 364 365 dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val); 366 } 367 368 static int iproc_gpio_get(struct gpio_chip *gc, unsigned gpio) 369 { 370 struct iproc_gpio *chip = gpiochip_get_data(gc); 371 unsigned int offset = IPROC_GPIO_REG(gpio, 372 IPROC_GPIO_DATA_IN_OFFSET); 373 unsigned int shift = IPROC_GPIO_SHIFT(gpio); 374 375 return !!(readl(chip->base + offset) & BIT(shift)); 376 } 377 378 /* 379 * Mapping of the iProc PINCONF parameters to the generic pin configuration 380 * parameters 381 */ 382 static const enum pin_config_param iproc_pinconf_disable_map[] = { 383 [IPROC_PINCONF_DRIVE_STRENGTH] = PIN_CONFIG_DRIVE_STRENGTH, 384 [IPROC_PINCONF_BIAS_DISABLE] = PIN_CONFIG_BIAS_DISABLE, 385 [IPROC_PINCONF_BIAS_PULL_UP] = PIN_CONFIG_BIAS_PULL_UP, 386 [IPROC_PINCONF_BIAS_PULL_DOWN] = PIN_CONFIG_BIAS_PULL_DOWN, 387 }; 388 389 static bool iproc_pinconf_param_is_disabled(struct iproc_gpio *chip, 390 enum pin_config_param param) 391 { 392 unsigned int i; 393 394 if (!chip->nr_pinconf_disable) 395 return false; 396 397 for (i = 0; i < chip->nr_pinconf_disable; i++) 398 if (chip->pinconf_disable[i] == param) 399 return true; 400 401 return false; 402 } 403 404 static int iproc_pinconf_disable_map_create(struct iproc_gpio *chip, 405 unsigned long disable_mask) 406 { 407 unsigned int map_size = ARRAY_SIZE(iproc_pinconf_disable_map); 408 unsigned int bit, nbits = 0; 409 410 /* figure out total number of PINCONF parameters to disable */ 411 for_each_set_bit(bit, &disable_mask, map_size) 412 nbits++; 413 414 if (!nbits) 415 return 0; 416 417 /* 418 * Allocate an array to store PINCONF parameters that need to be 419 * disabled 420 */ 421 chip->pinconf_disable = devm_kcalloc(chip->dev, nbits, 422 sizeof(*chip->pinconf_disable), 423 GFP_KERNEL); 424 if (!chip->pinconf_disable) 425 return -ENOMEM; 426 427 chip->nr_pinconf_disable = nbits; 428 429 /* now store these parameters */ 430 nbits = 0; 431 for_each_set_bit(bit, &disable_mask, map_size) 432 chip->pinconf_disable[nbits++] = iproc_pinconf_disable_map[bit]; 433 434 return 0; 435 } 436 437 static int iproc_get_groups_count(struct pinctrl_dev *pctldev) 438 { 439 return 1; 440 } 441 442 /* 443 * Only one group: "gpio_grp", since this local pinctrl device only performs 444 * GPIO specific PINCONF configurations 445 */ 446 static const char *iproc_get_group_name(struct pinctrl_dev *pctldev, 447 unsigned selector) 448 { 449 return "gpio_grp"; 450 } 451 452 static const struct pinctrl_ops iproc_pctrl_ops = { 453 .get_groups_count = iproc_get_groups_count, 454 .get_group_name = iproc_get_group_name, 455 .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, 456 .dt_free_map = pinctrl_utils_free_map, 457 }; 458 459 static int iproc_gpio_set_pull(struct iproc_gpio *chip, unsigned gpio, 460 bool disable, bool pull_up) 461 { 462 unsigned long flags; 463 464 spin_lock_irqsave(&chip->lock, flags); 465 466 if (disable) { 467 iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio, false); 468 } else { 469 iproc_set_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio, 470 pull_up); 471 iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio, true); 472 } 473 474 spin_unlock_irqrestore(&chip->lock, flags); 475 476 dev_dbg(chip->dev, "gpio:%u set pullup:%d\n", gpio, pull_up); 477 478 return 0; 479 } 480 481 static void iproc_gpio_get_pull(struct iproc_gpio *chip, unsigned gpio, 482 bool *disable, bool *pull_up) 483 { 484 unsigned long flags; 485 486 spin_lock_irqsave(&chip->lock, flags); 487 *disable = !iproc_get_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio); 488 *pull_up = iproc_get_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio); 489 spin_unlock_irqrestore(&chip->lock, flags); 490 } 491 492 static int iproc_gpio_set_strength(struct iproc_gpio *chip, unsigned gpio, 493 unsigned strength) 494 { 495 void __iomem *base; 496 unsigned int i, offset, shift; 497 u32 val; 498 unsigned long flags; 499 500 /* make sure drive strength is supported */ 501 if (strength < 2 || strength > 16 || (strength % 2)) 502 return -ENOTSUPP; 503 504 if (chip->io_ctrl) { 505 base = chip->io_ctrl; 506 offset = IPROC_GPIO_DRV0_CTRL_OFFSET; 507 } else { 508 base = chip->base; 509 offset = IPROC_GPIO_REG(gpio, 510 IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET); 511 } 512 513 shift = IPROC_GPIO_SHIFT(gpio); 514 515 dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio, 516 strength); 517 518 spin_lock_irqsave(&chip->lock, flags); 519 strength = (strength / 2) - 1; 520 for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) { 521 val = readl(base + offset); 522 val &= ~BIT(shift); 523 val |= ((strength >> i) & 0x1) << shift; 524 writel(val, base + offset); 525 offset += 4; 526 } 527 spin_unlock_irqrestore(&chip->lock, flags); 528 529 return 0; 530 } 531 532 static int iproc_gpio_get_strength(struct iproc_gpio *chip, unsigned gpio, 533 u16 *strength) 534 { 535 void __iomem *base; 536 unsigned int i, offset, shift; 537 u32 val; 538 unsigned long flags; 539 540 if (chip->io_ctrl) { 541 base = chip->io_ctrl; 542 offset = IPROC_GPIO_DRV0_CTRL_OFFSET; 543 } else { 544 base = chip->base; 545 offset = IPROC_GPIO_REG(gpio, 546 IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET); 547 } 548 549 shift = IPROC_GPIO_SHIFT(gpio); 550 551 spin_lock_irqsave(&chip->lock, flags); 552 *strength = 0; 553 for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) { 554 val = readl(base + offset) & BIT(shift); 555 val >>= shift; 556 *strength += (val << i); 557 offset += 4; 558 } 559 560 /* convert to mA */ 561 *strength = (*strength + 1) * 2; 562 spin_unlock_irqrestore(&chip->lock, flags); 563 564 return 0; 565 } 566 567 static int iproc_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin, 568 unsigned long *config) 569 { 570 struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev); 571 enum pin_config_param param = pinconf_to_config_param(*config); 572 unsigned gpio = iproc_pin_to_gpio(pin); 573 u16 arg; 574 bool disable, pull_up; 575 int ret; 576 577 if (iproc_pinconf_param_is_disabled(chip, param)) 578 return -ENOTSUPP; 579 580 switch (param) { 581 case PIN_CONFIG_BIAS_DISABLE: 582 iproc_gpio_get_pull(chip, gpio, &disable, &pull_up); 583 if (disable) 584 return 0; 585 else 586 return -EINVAL; 587 588 case PIN_CONFIG_BIAS_PULL_UP: 589 iproc_gpio_get_pull(chip, gpio, &disable, &pull_up); 590 if (!disable && pull_up) 591 return 0; 592 else 593 return -EINVAL; 594 595 case PIN_CONFIG_BIAS_PULL_DOWN: 596 iproc_gpio_get_pull(chip, gpio, &disable, &pull_up); 597 if (!disable && !pull_up) 598 return 0; 599 else 600 return -EINVAL; 601 602 case PIN_CONFIG_DRIVE_STRENGTH: 603 ret = iproc_gpio_get_strength(chip, gpio, &arg); 604 if (ret) 605 return ret; 606 *config = pinconf_to_config_packed(param, arg); 607 608 return 0; 609 610 default: 611 return -ENOTSUPP; 612 } 613 614 return -ENOTSUPP; 615 } 616 617 static int iproc_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, 618 unsigned long *configs, unsigned num_configs) 619 { 620 struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev); 621 enum pin_config_param param; 622 u16 arg; 623 unsigned i, gpio = iproc_pin_to_gpio(pin); 624 int ret = -ENOTSUPP; 625 626 for (i = 0; i < num_configs; i++) { 627 param = pinconf_to_config_param(configs[i]); 628 629 if (iproc_pinconf_param_is_disabled(chip, param)) 630 return -ENOTSUPP; 631 632 arg = pinconf_to_config_argument(configs[i]); 633 634 switch (param) { 635 case PIN_CONFIG_BIAS_DISABLE: 636 ret = iproc_gpio_set_pull(chip, gpio, true, false); 637 if (ret < 0) 638 goto out; 639 break; 640 641 case PIN_CONFIG_BIAS_PULL_UP: 642 ret = iproc_gpio_set_pull(chip, gpio, false, true); 643 if (ret < 0) 644 goto out; 645 break; 646 647 case PIN_CONFIG_BIAS_PULL_DOWN: 648 ret = iproc_gpio_set_pull(chip, gpio, false, false); 649 if (ret < 0) 650 goto out; 651 break; 652 653 case PIN_CONFIG_DRIVE_STRENGTH: 654 ret = iproc_gpio_set_strength(chip, gpio, arg); 655 if (ret < 0) 656 goto out; 657 break; 658 659 default: 660 dev_err(chip->dev, "invalid configuration\n"); 661 return -ENOTSUPP; 662 } 663 } /* for each config */ 664 665 out: 666 return ret; 667 } 668 669 static const struct pinconf_ops iproc_pconf_ops = { 670 .is_generic = true, 671 .pin_config_get = iproc_pin_config_get, 672 .pin_config_set = iproc_pin_config_set, 673 }; 674 675 /* 676 * Iproc GPIO controller supports some PINCONF related configurations such as 677 * pull up, pull down, and drive strength, when the pin is configured to GPIO 678 * 679 * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the 680 * local GPIO pins 681 */ 682 static int iproc_gpio_register_pinconf(struct iproc_gpio *chip) 683 { 684 struct pinctrl_desc *pctldesc = &chip->pctldesc; 685 struct pinctrl_pin_desc *pins; 686 struct gpio_chip *gc = &chip->gc; 687 int i; 688 689 pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL); 690 if (!pins) 691 return -ENOMEM; 692 693 for (i = 0; i < gc->ngpio; i++) { 694 pins[i].number = i; 695 pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL, 696 "gpio-%d", i); 697 if (!pins[i].name) 698 return -ENOMEM; 699 } 700 701 pctldesc->name = dev_name(chip->dev); 702 pctldesc->pctlops = &iproc_pctrl_ops; 703 pctldesc->pins = pins; 704 pctldesc->npins = gc->ngpio; 705 pctldesc->confops = &iproc_pconf_ops; 706 707 chip->pctl = devm_pinctrl_register(chip->dev, pctldesc, chip); 708 if (IS_ERR(chip->pctl)) { 709 dev_err(chip->dev, "unable to register pinctrl device\n"); 710 return PTR_ERR(chip->pctl); 711 } 712 713 return 0; 714 } 715 716 static const struct of_device_id iproc_gpio_of_match[] = { 717 { .compatible = "brcm,iproc-gpio" }, 718 { .compatible = "brcm,cygnus-ccm-gpio" }, 719 { .compatible = "brcm,cygnus-asiu-gpio" }, 720 { .compatible = "brcm,cygnus-crmu-gpio" }, 721 { .compatible = "brcm,iproc-nsp-gpio" }, 722 { .compatible = "brcm,iproc-stingray-gpio" }, 723 { /* sentinel */ } 724 }; 725 726 static int iproc_gpio_probe(struct platform_device *pdev) 727 { 728 struct device *dev = &pdev->dev; 729 struct resource *res; 730 struct iproc_gpio *chip; 731 struct gpio_chip *gc; 732 u32 ngpios, pinconf_disable_mask = 0; 733 int irq, ret; 734 bool no_pinconf = false; 735 736 /* NSP does not support drive strength config */ 737 if (of_device_is_compatible(dev->of_node, "brcm,iproc-nsp-gpio")) 738 pinconf_disable_mask = BIT(IPROC_PINCONF_DRIVE_STRENGTH); 739 /* Stingray does not support pinconf in this controller */ 740 else if (of_device_is_compatible(dev->of_node, 741 "brcm,iproc-stingray-gpio")) 742 no_pinconf = true; 743 744 chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); 745 if (!chip) 746 return -ENOMEM; 747 748 chip->dev = dev; 749 platform_set_drvdata(pdev, chip); 750 751 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 752 chip->base = devm_ioremap_resource(dev, res); 753 if (IS_ERR(chip->base)) { 754 dev_err(dev, "unable to map I/O memory\n"); 755 return PTR_ERR(chip->base); 756 } 757 758 res = platform_get_resource(pdev, IORESOURCE_MEM, 1); 759 if (res) { 760 chip->io_ctrl = devm_ioremap_resource(dev, res); 761 if (IS_ERR(chip->io_ctrl)) { 762 dev_err(dev, "unable to map I/O memory\n"); 763 return PTR_ERR(chip->io_ctrl); 764 } 765 } 766 767 if (of_property_read_u32(dev->of_node, "ngpios", &ngpios)) { 768 dev_err(&pdev->dev, "missing ngpios DT property\n"); 769 return -ENODEV; 770 } 771 772 spin_lock_init(&chip->lock); 773 774 gc = &chip->gc; 775 gc->base = -1; 776 gc->ngpio = ngpios; 777 chip->num_banks = (ngpios + NGPIOS_PER_BANK - 1) / NGPIOS_PER_BANK; 778 gc->label = dev_name(dev); 779 gc->parent = dev; 780 gc->of_node = dev->of_node; 781 gc->request = iproc_gpio_request; 782 gc->free = iproc_gpio_free; 783 gc->direction_input = iproc_gpio_direction_input; 784 gc->direction_output = iproc_gpio_direction_output; 785 gc->set = iproc_gpio_set; 786 gc->get = iproc_gpio_get; 787 788 chip->pinmux_is_supported = of_property_read_bool(dev->of_node, 789 "gpio-ranges"); 790 791 ret = gpiochip_add_data(gc, chip); 792 if (ret < 0) { 793 dev_err(dev, "unable to add GPIO chip\n"); 794 return ret; 795 } 796 797 if (!no_pinconf) { 798 ret = iproc_gpio_register_pinconf(chip); 799 if (ret) { 800 dev_err(dev, "unable to register pinconf\n"); 801 goto err_rm_gpiochip; 802 } 803 804 if (pinconf_disable_mask) { 805 ret = iproc_pinconf_disable_map_create(chip, 806 pinconf_disable_mask); 807 if (ret) { 808 dev_err(dev, 809 "unable to create pinconf disable map\n"); 810 goto err_rm_gpiochip; 811 } 812 } 813 } 814 815 /* optional GPIO interrupt support */ 816 irq = platform_get_irq(pdev, 0); 817 if (irq) { 818 ret = gpiochip_irqchip_add(gc, &iproc_gpio_irq_chip, 0, 819 handle_simple_irq, IRQ_TYPE_NONE); 820 if (ret) { 821 dev_err(dev, "no GPIO irqchip\n"); 822 goto err_rm_gpiochip; 823 } 824 825 gpiochip_set_chained_irqchip(gc, &iproc_gpio_irq_chip, irq, 826 iproc_gpio_irq_handler); 827 } 828 829 return 0; 830 831 err_rm_gpiochip: 832 gpiochip_remove(gc); 833 834 return ret; 835 } 836 837 static struct platform_driver iproc_gpio_driver = { 838 .driver = { 839 .name = "iproc-gpio", 840 .of_match_table = iproc_gpio_of_match, 841 }, 842 .probe = iproc_gpio_probe, 843 }; 844 845 static int __init iproc_gpio_init(void) 846 { 847 return platform_driver_probe(&iproc_gpio_driver, iproc_gpio_probe); 848 } 849 arch_initcall_sync(iproc_gpio_init); 850