1# 2# PINCTRL infrastructure and drivers 3# 4 5config PINCTRL 6 bool 7 8if PINCTRL 9 10menu "Pin controllers" 11 depends on PINCTRL 12 13config PINMUX 14 bool "Support pin multiplexing controllers" if COMPILE_TEST 15 16config PINCONF 17 bool "Support pin configuration controllers" if COMPILE_TEST 18 19config GENERIC_PINCONF 20 bool 21 select PINCONF 22 23config DEBUG_PINCTRL 24 bool "Debug PINCTRL calls" 25 depends on DEBUG_KERNEL 26 help 27 Say Y here to add some extra checks and diagnostics to PINCTRL calls. 28 29config PINCTRL_ADI2 30 bool "ADI pin controller driver" 31 depends on BLACKFIN 32 select PINMUX 33 select IRQ_DOMAIN 34 help 35 This is the pin controller and gpio driver for ADI BF54x, BF60x and 36 future processors. This option is selected automatically when specific 37 machine and arch are selected to build. 38 39config PINCTRL_AS3722 40 bool "Pinctrl and GPIO driver for ams AS3722 PMIC" 41 depends on MFD_AS3722 && GPIOLIB 42 select PINMUX 43 select GENERIC_PINCONF 44 help 45 AS3722 device supports the configuration of GPIO pins for different 46 functionality. This driver supports the pinmux, push-pull and 47 open drain configuration for the GPIO pins of AS3722 devices. It also 48 supports the GPIO functionality through gpiolib. 49 50config PINCTRL_BF54x 51 def_bool y if BF54x 52 select PINCTRL_ADI2 53 54config PINCTRL_BF60x 55 def_bool y if BF60x 56 select PINCTRL_ADI2 57 58config PINCTRL_AT91 59 bool "AT91 pinctrl driver" 60 depends on OF 61 depends on ARCH_AT91 62 select PINMUX 63 select PINCONF 64 select GPIOLIB 65 select OF_GPIO 66 select GPIOLIB_IRQCHIP 67 help 68 Say Y here to enable the at91 pinctrl driver 69 70config PINCTRL_AT91PIO4 71 bool "AT91 PIO4 pinctrl driver" 72 depends on OF 73 depends on ARCH_AT91 74 select PINMUX 75 select GENERIC_PINCONF 76 select GPIOLIB 77 select GPIOLIB_IRQCHIP 78 select OF_GPIO 79 help 80 Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4 81 controller available on sama5d2 SoC. 82 83config PINCTRL_AMD 84 bool "AMD GPIO pin control" 85 depends on GPIOLIB 86 select GPIOLIB_IRQCHIP 87 select PINCONF 88 select GENERIC_PINCONF 89 help 90 driver for memory mapped GPIO functionality on AMD platforms 91 (x86 or arm).Most pins are usually muxed to some other 92 functionality by firmware,so only a small amount is available 93 for gpio use. 94 95 Requires ACPI/FDT device enumeration code to set up a platform 96 device. 97 98config PINCTRL_DIGICOLOR 99 bool 100 depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST) 101 select PINMUX 102 select GENERIC_PINCONF 103 104config PINCTRL_LANTIQ 105 bool 106 depends on LANTIQ 107 select PINMUX 108 select PINCONF 109 110config PINCTRL_LPC18XX 111 bool "NXP LPC18XX/43XX SCU pinctrl driver" 112 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 113 default ARCH_LPC18XX 114 select PINMUX 115 select GENERIC_PINCONF 116 help 117 Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU). 118 119config PINCTRL_FALCON 120 bool 121 depends on SOC_FALCON 122 depends on PINCTRL_LANTIQ 123 124config PINCTRL_MESON 125 bool 126 depends on OF 127 select PINMUX 128 select PINCONF 129 select GENERIC_PINCONF 130 select GPIOLIB 131 select OF_GPIO 132 select REGMAP_MMIO 133 134config PINCTRL_ROCKCHIP 135 bool 136 select PINMUX 137 select GENERIC_PINCONF 138 select GENERIC_IRQ_CHIP 139 select MFD_SYSCON 140 141config PINCTRL_SINGLE 142 tristate "One-register-per-pin type device tree based pinctrl driver" 143 depends on OF 144 select PINMUX 145 select PINCONF 146 select GENERIC_PINCONF 147 help 148 This selects the device tree based generic pinctrl driver. 149 150config PINCTRL_SIRF 151 bool "CSR SiRFprimaII pin controller driver" 152 depends on ARCH_SIRF 153 select PINMUX 154 select PINCONF 155 select GENERIC_PINCONF 156 select GPIOLIB_IRQCHIP 157 158config PINCTRL_PISTACHIO 159 def_bool y if MACH_PISTACHIO 160 depends on GPIOLIB 161 select PINMUX 162 select GENERIC_PINCONF 163 select GPIOLIB_IRQCHIP 164 select OF_GPIO 165 166config PINCTRL_ST 167 bool 168 depends on OF 169 select PINMUX 170 select PINCONF 171 select GPIOLIB_IRQCHIP 172 173config PINCTRL_TEGRA 174 bool 175 select PINMUX 176 select PINCONF 177 178config PINCTRL_TEGRA20 179 bool 180 select PINCTRL_TEGRA 181 182config PINCTRL_TEGRA30 183 bool 184 select PINCTRL_TEGRA 185 186config PINCTRL_TEGRA114 187 bool 188 select PINCTRL_TEGRA 189 190config PINCTRL_TEGRA124 191 bool 192 select PINCTRL_TEGRA 193 194config PINCTRL_TEGRA210 195 bool 196 select PINCTRL_TEGRA 197 198config PINCTRL_TEGRA_XUSB 199 def_bool y if ARCH_TEGRA 200 select GENERIC_PHY 201 select PINCONF 202 select PINMUX 203 204config PINCTRL_TZ1090 205 bool "Toumaz Xenif TZ1090 pin control driver" 206 depends on SOC_TZ1090 207 select PINMUX 208 select GENERIC_PINCONF 209 210config PINCTRL_TZ1090_PDC 211 bool "Toumaz Xenif TZ1090 PDC pin control driver" 212 depends on SOC_TZ1090 213 select PINMUX 214 select PINCONF 215 216config PINCTRL_U300 217 bool "U300 pin controller driver" 218 depends on ARCH_U300 219 select PINMUX 220 select GENERIC_PINCONF 221 222config PINCTRL_COH901 223 bool "ST-Ericsson U300 COH 901 335/571 GPIO" 224 depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 225 select GPIOLIB_IRQCHIP 226 help 227 Say yes here to support GPIO interface on ST-Ericsson U300. 228 The names of the two IP block variants supported are 229 COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 230 ports of 8 GPIO pins each. 231 232config PINCTRL_PALMAS 233 bool "Pinctrl driver for the PALMAS Series MFD devices" 234 depends on OF && MFD_PALMAS 235 select PINMUX 236 select GENERIC_PINCONF 237 help 238 Palmas device supports the configuration of pins for different 239 functionality. This driver supports the pinmux, push-pull and 240 open drain configuration for the Palmas series devices like 241 TPS65913, TPS80036 etc. 242 243config PINCTRL_ZYNQ 244 bool "Pinctrl driver for Xilinx Zynq" 245 depends on ARCH_ZYNQ 246 select PINMUX 247 select GENERIC_PINCONF 248 help 249 This selectes the pinctrl driver for Xilinx Zynq. 250 251source "drivers/pinctrl/bcm/Kconfig" 252source "drivers/pinctrl/berlin/Kconfig" 253source "drivers/pinctrl/freescale/Kconfig" 254source "drivers/pinctrl/intel/Kconfig" 255source "drivers/pinctrl/mvebu/Kconfig" 256source "drivers/pinctrl/nomadik/Kconfig" 257source "drivers/pinctrl/qcom/Kconfig" 258source "drivers/pinctrl/samsung/Kconfig" 259source "drivers/pinctrl/sh-pfc/Kconfig" 260source "drivers/pinctrl/spear/Kconfig" 261source "drivers/pinctrl/sunxi/Kconfig" 262source "drivers/pinctrl/uniphier/Kconfig" 263source "drivers/pinctrl/vt8500/Kconfig" 264source "drivers/pinctrl/mediatek/Kconfig" 265 266config PINCTRL_XWAY 267 bool 268 depends on SOC_TYPE_XWAY 269 depends on PINCTRL_LANTIQ 270 271config PINCTRL_TB10X 272 bool 273 depends on OF && ARC_PLAT_TB10X 274 select GPIOLIB 275 276endmenu 277 278endif 279