1# 2# PINCTRL infrastructure and drivers 3# 4 5config PINCTRL 6 bool 7 8menu "Pin controllers" 9 depends on PINCTRL 10 11config PINMUX 12 bool "Support pin multiplexing controllers" if COMPILE_TEST 13 14config PINCONF 15 bool "Support pin configuration controllers" if COMPILE_TEST 16 17config GENERIC_PINCONF 18 bool 19 select PINCONF 20 21config DEBUG_PINCTRL 22 bool "Debug PINCTRL calls" 23 depends on DEBUG_KERNEL 24 help 25 Say Y here to add some extra checks and diagnostics to PINCTRL calls. 26 27config PINCTRL_ADI2 28 bool "ADI pin controller driver" 29 depends on BLACKFIN 30 select PINMUX 31 select IRQ_DOMAIN 32 help 33 This is the pin controller and gpio driver for ADI BF54x, BF60x and 34 future processors. This option is selected automatically when specific 35 machine and arch are selected to build. 36 37config PINCTRL_AS3722 38 bool "Pinctrl and GPIO driver for ams AS3722 PMIC" 39 depends on MFD_AS3722 && GPIOLIB 40 select PINMUX 41 select GENERIC_PINCONF 42 help 43 AS3722 device supports the configuration of GPIO pins for different 44 functionality. This driver supports the pinmux, push-pull and 45 open drain configuration for the GPIO pins of AS3722 devices. It also 46 supports the GPIO functionality through gpiolib. 47 48config PINCTRL_BF54x 49 def_bool y if BF54x 50 select PINCTRL_ADI2 51 52config PINCTRL_BF60x 53 def_bool y if BF60x 54 select PINCTRL_ADI2 55 56config PINCTRL_AT91 57 bool "AT91 pinctrl driver" 58 depends on OF 59 depends on ARCH_AT91 60 select PINMUX 61 select PINCONF 62 select GPIOLIB 63 select OF_GPIO 64 select GPIOLIB_IRQCHIP 65 help 66 Say Y here to enable the at91 pinctrl driver 67 68config PINCTRL_AT91PIO4 69 bool "AT91 PIO4 pinctrl driver" 70 depends on OF 71 depends on ARCH_AT91 72 select PINMUX 73 select GENERIC_PINCONF 74 select GPIOLIB 75 select GPIOLIB_IRQCHIP 76 select OF_GPIO 77 help 78 Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4 79 controller available on sama5d2 SoC. 80 81config PINCTRL_AMD 82 bool "AMD GPIO pin control" 83 depends on GPIOLIB 84 select GPIOLIB_IRQCHIP 85 select PINCONF 86 select GENERIC_PINCONF 87 help 88 driver for memory mapped GPIO functionality on AMD platforms 89 (x86 or arm).Most pins are usually muxed to some other 90 functionality by firmware,so only a small amount is available 91 for gpio use. 92 93 Requires ACPI/FDT device enumeration code to set up a platform 94 device. 95 96config PINCTRL_DIGICOLOR 97 bool 98 depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST) 99 select PINMUX 100 select GENERIC_PINCONF 101 102config PINCTRL_LANTIQ 103 bool 104 depends on LANTIQ 105 select PINMUX 106 select PINCONF 107 108config PINCTRL_LPC18XX 109 bool "NXP LPC18XX/43XX SCU pinctrl driver" 110 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 111 default ARCH_LPC18XX 112 select PINMUX 113 select GENERIC_PINCONF 114 help 115 Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU). 116 117config PINCTRL_FALCON 118 bool 119 depends on SOC_FALCON 120 depends on PINCTRL_LANTIQ 121 122config PINCTRL_MESON 123 bool 124 depends on OF 125 select PINMUX 126 select PINCONF 127 select GENERIC_PINCONF 128 select GPIOLIB 129 select OF_GPIO 130 select REGMAP_MMIO 131 132config PINCTRL_ROCKCHIP 133 bool 134 select PINMUX 135 select GENERIC_PINCONF 136 select GENERIC_IRQ_CHIP 137 select MFD_SYSCON 138 139config PINCTRL_SINGLE 140 tristate "One-register-per-pin type device tree based pinctrl driver" 141 depends on OF 142 select PINMUX 143 select PINCONF 144 select GENERIC_PINCONF 145 help 146 This selects the device tree based generic pinctrl driver. 147 148config PINCTRL_SIRF 149 bool "CSR SiRFprimaII pin controller driver" 150 depends on ARCH_SIRF 151 select PINMUX 152 select PINCONF 153 select GENERIC_PINCONF 154 select GPIOLIB_IRQCHIP 155 156config PINCTRL_PISTACHIO 157 def_bool y if MACH_PISTACHIO 158 depends on GPIOLIB 159 select PINMUX 160 select GENERIC_PINCONF 161 select GPIOLIB_IRQCHIP 162 select OF_GPIO 163 164config PINCTRL_ST 165 bool 166 depends on OF 167 select PINMUX 168 select PINCONF 169 select GPIOLIB_IRQCHIP 170 171config PINCTRL_TEGRA 172 bool 173 select PINMUX 174 select PINCONF 175 176config PINCTRL_TEGRA20 177 bool 178 select PINCTRL_TEGRA 179 180config PINCTRL_TEGRA30 181 bool 182 select PINCTRL_TEGRA 183 184config PINCTRL_TEGRA114 185 bool 186 select PINCTRL_TEGRA 187 188config PINCTRL_TEGRA124 189 bool 190 select PINCTRL_TEGRA 191 192config PINCTRL_TEGRA210 193 bool 194 select PINCTRL_TEGRA 195 196config PINCTRL_TEGRA_XUSB 197 def_bool y if ARCH_TEGRA 198 select GENERIC_PHY 199 select PINCONF 200 select PINMUX 201 202config PINCTRL_TZ1090 203 bool "Toumaz Xenif TZ1090 pin control driver" 204 depends on SOC_TZ1090 205 select PINMUX 206 select GENERIC_PINCONF 207 208config PINCTRL_TZ1090_PDC 209 bool "Toumaz Xenif TZ1090 PDC pin control driver" 210 depends on SOC_TZ1090 211 select PINMUX 212 select PINCONF 213 214config PINCTRL_U300 215 bool "U300 pin controller driver" 216 depends on ARCH_U300 217 select PINMUX 218 select GENERIC_PINCONF 219 220config PINCTRL_COH901 221 bool "ST-Ericsson U300 COH 901 335/571 GPIO" 222 depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 223 select GPIOLIB_IRQCHIP 224 help 225 Say yes here to support GPIO interface on ST-Ericsson U300. 226 The names of the two IP block variants supported are 227 COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 228 ports of 8 GPIO pins each. 229 230config PINCTRL_PALMAS 231 bool "Pinctrl driver for the PALMAS Series MFD devices" 232 depends on OF && MFD_PALMAS 233 select PINMUX 234 select GENERIC_PINCONF 235 help 236 Palmas device supports the configuration of pins for different 237 functionality. This driver supports the pinmux, push-pull and 238 open drain configuration for the Palmas series devices like 239 TPS65913, TPS80036 etc. 240 241config PINCTRL_ZYNQ 242 bool "Pinctrl driver for Xilinx Zynq" 243 depends on ARCH_ZYNQ 244 select PINMUX 245 select GENERIC_PINCONF 246 help 247 This selectes the pinctrl driver for Xilinx Zynq. 248 249source "drivers/pinctrl/bcm/Kconfig" 250source "drivers/pinctrl/berlin/Kconfig" 251source "drivers/pinctrl/freescale/Kconfig" 252source "drivers/pinctrl/intel/Kconfig" 253source "drivers/pinctrl/mvebu/Kconfig" 254source "drivers/pinctrl/nomadik/Kconfig" 255source "drivers/pinctrl/qcom/Kconfig" 256source "drivers/pinctrl/samsung/Kconfig" 257source "drivers/pinctrl/sh-pfc/Kconfig" 258source "drivers/pinctrl/spear/Kconfig" 259source "drivers/pinctrl/sunxi/Kconfig" 260source "drivers/pinctrl/uniphier/Kconfig" 261source "drivers/pinctrl/vt8500/Kconfig" 262source "drivers/pinctrl/mediatek/Kconfig" 263 264config PINCTRL_XWAY 265 bool 266 depends on SOC_TYPE_XWAY 267 depends on PINCTRL_LANTIQ 268 269config PINCTRL_TB10X 270 bool 271 depends on OF && ARC_PLAT_TB10X 272 select GPIOLIB 273 274endmenu 275