xref: /openbmc/linux/drivers/phy/ti/phy-omap-usb2.c (revision a34a9f1a)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * omap-usb2.c - USB PHY, talking to USB controller on TI SoCs.
4  *
5  * Copyright (C) 2012-2020 Texas Instruments Incorporated - http://www.ti.com
6  * Author: Kishon Vijay Abraham I <kishon@ti.com>
7  */
8 
9 #include <linux/clk.h>
10 #include <linux/delay.h>
11 #include <linux/err.h>
12 #include <linux/io.h>
13 #include <linux/mfd/syscon.h>
14 #include <linux/module.h>
15 #include <linux/of.h>
16 #include <linux/of_platform.h>
17 #include <linux/phy/omap_control_phy.h>
18 #include <linux/phy/omap_usb.h>
19 #include <linux/phy/phy.h>
20 #include <linux/platform_device.h>
21 #include <linux/pm_runtime.h>
22 #include <linux/regmap.h>
23 #include <linux/slab.h>
24 #include <linux/sys_soc.h>
25 #include <linux/usb/phy_companion.h>
26 
27 #define USB2PHY_ANA_CONFIG1		0x4c
28 #define USB2PHY_DISCON_BYP_LATCH	BIT(31)
29 
30 #define USB2PHY_CHRG_DET			0x14
31 #define USB2PHY_CHRG_DET_USE_CHG_DET_REG	BIT(29)
32 #define USB2PHY_CHRG_DET_DIS_CHG_DET		BIT(28)
33 
34 /* SoC Specific USB2_OTG register definitions */
35 #define AM654_USB2_OTG_PD		BIT(8)
36 #define AM654_USB2_VBUS_DET_EN		BIT(5)
37 #define AM654_USB2_VBUSVALID_DET_EN	BIT(4)
38 
39 #define OMAP_DEV_PHY_PD		BIT(0)
40 #define OMAP_USB2_PHY_PD	BIT(28)
41 
42 #define AM437X_USB2_PHY_PD		BIT(0)
43 #define AM437X_USB2_OTG_PD		BIT(1)
44 #define AM437X_USB2_OTGVDET_EN		BIT(19)
45 #define AM437X_USB2_OTGSESSEND_EN	BIT(20)
46 
47 /* Driver Flags */
48 #define OMAP_USB2_HAS_START_SRP			BIT(0)
49 #define OMAP_USB2_HAS_SET_VBUS			BIT(1)
50 #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT	BIT(2)
51 #define OMAP_USB2_DISABLE_CHRG_DET		BIT(3)
52 
53 struct omap_usb {
54 	struct usb_phy		phy;
55 	struct phy_companion	*comparator;
56 	void __iomem		*pll_ctrl_base;
57 	void __iomem		*phy_base;
58 	struct device		*dev;
59 	struct device		*control_dev;
60 	struct clk		*wkupclk;
61 	struct clk		*optclk;
62 	u8			flags;
63 	struct regmap		*syscon_phy_power; /* ctrl. reg. acces */
64 	unsigned int		power_reg; /* power reg. index within syscon */
65 	u32			mask;
66 	u32			power_on;
67 	u32			power_off;
68 };
69 
70 #define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
71 
72 struct usb_phy_data {
73 	const char *label;
74 	u8 flags;
75 	u32 mask;
76 	u32 power_on;
77 	u32 power_off;
78 };
79 
80 static inline u32 omap_usb_readl(void __iomem *addr, unsigned int offset)
81 {
82 	return __raw_readl(addr + offset);
83 }
84 
85 static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
86 				   u32 data)
87 {
88 	__raw_writel(data, addr + offset);
89 }
90 
91 /**
92  * omap_usb2_set_comparator() - links the comparator present in the system with this phy
93  *
94  * @comparator:  the companion phy(comparator) for this phy
95  *
96  * The phy companion driver should call this API passing the phy_companion
97  * filled with set_vbus and start_srp to be used by usb phy.
98  *
99  * For use by phy companion driver
100  */
101 int omap_usb2_set_comparator(struct phy_companion *comparator)
102 {
103 	struct omap_usb	*phy;
104 	struct usb_phy	*x = usb_get_phy(USB_PHY_TYPE_USB2);
105 
106 	if (IS_ERR(x))
107 		return -ENODEV;
108 
109 	phy = phy_to_omapusb(x);
110 	phy->comparator = comparator;
111 	return 0;
112 }
113 EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
114 
115 static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
116 {
117 	struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
118 
119 	if (!phy->comparator)
120 		return -ENODEV;
121 
122 	return phy->comparator->set_vbus(phy->comparator, enabled);
123 }
124 
125 static int omap_usb_start_srp(struct usb_otg *otg)
126 {
127 	struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
128 
129 	if (!phy->comparator)
130 		return -ENODEV;
131 
132 	return phy->comparator->start_srp(phy->comparator);
133 }
134 
135 static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
136 {
137 	otg->host = host;
138 	if (!host)
139 		otg->state = OTG_STATE_UNDEFINED;
140 
141 	return 0;
142 }
143 
144 static int omap_usb_set_peripheral(struct usb_otg *otg,
145 				   struct usb_gadget *gadget)
146 {
147 	otg->gadget = gadget;
148 	if (!gadget)
149 		otg->state = OTG_STATE_UNDEFINED;
150 
151 	return 0;
152 }
153 
154 static int omap_usb_phy_power(struct omap_usb *phy, int on)
155 {
156 	u32 val;
157 	int ret;
158 
159 	if (!phy->syscon_phy_power) {
160 		omap_control_phy_power(phy->control_dev, on);
161 		return 0;
162 	}
163 
164 	if (on)
165 		val = phy->power_on;
166 	else
167 		val = phy->power_off;
168 
169 	ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
170 				 phy->mask, val);
171 	return ret;
172 }
173 
174 static int omap_usb_power_off(struct phy *x)
175 {
176 	struct omap_usb *phy = phy_get_drvdata(x);
177 
178 	return omap_usb_phy_power(phy, false);
179 }
180 
181 static int omap_usb_power_on(struct phy *x)
182 {
183 	struct omap_usb *phy = phy_get_drvdata(x);
184 
185 	return omap_usb_phy_power(phy, true);
186 }
187 
188 static int omap_usb2_disable_clocks(struct omap_usb *phy)
189 {
190 	clk_disable_unprepare(phy->wkupclk);
191 	if (!IS_ERR(phy->optclk))
192 		clk_disable_unprepare(phy->optclk);
193 
194 	return 0;
195 }
196 
197 static int omap_usb2_enable_clocks(struct omap_usb *phy)
198 {
199 	int ret;
200 
201 	ret = clk_prepare_enable(phy->wkupclk);
202 	if (ret < 0) {
203 		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
204 		goto err0;
205 	}
206 
207 	if (!IS_ERR(phy->optclk)) {
208 		ret = clk_prepare_enable(phy->optclk);
209 		if (ret < 0) {
210 			dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
211 			goto err1;
212 		}
213 	}
214 
215 	return 0;
216 
217 err1:
218 	clk_disable_unprepare(phy->wkupclk);
219 
220 err0:
221 	return ret;
222 }
223 
224 static int omap_usb_init(struct phy *x)
225 {
226 	struct omap_usb *phy = phy_get_drvdata(x);
227 	u32 val;
228 
229 	omap_usb2_enable_clocks(phy);
230 
231 	if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
232 		/*
233 		 *
234 		 * Reduce the sensitivity of internal PHY by enabling the
235 		 * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
236 		 * resolves issues with certain devices which can otherwise
237 		 * be prone to false disconnects.
238 		 *
239 		 */
240 		val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1);
241 		val |= USB2PHY_DISCON_BYP_LATCH;
242 		omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val);
243 	}
244 
245 	if (phy->flags & OMAP_USB2_DISABLE_CHRG_DET) {
246 		val = omap_usb_readl(phy->phy_base, USB2PHY_CHRG_DET);
247 		val |= USB2PHY_CHRG_DET_USE_CHG_DET_REG |
248 		       USB2PHY_CHRG_DET_DIS_CHG_DET;
249 		omap_usb_writel(phy->phy_base, USB2PHY_CHRG_DET, val);
250 	}
251 
252 	return 0;
253 }
254 
255 static int omap_usb_exit(struct phy *x)
256 {
257 	struct omap_usb *phy = phy_get_drvdata(x);
258 
259 	return omap_usb2_disable_clocks(phy);
260 }
261 
262 static const struct phy_ops ops = {
263 	.init		= omap_usb_init,
264 	.exit		= omap_usb_exit,
265 	.power_on	= omap_usb_power_on,
266 	.power_off	= omap_usb_power_off,
267 	.owner		= THIS_MODULE,
268 };
269 
270 static const struct usb_phy_data omap_usb2_data = {
271 	.label = "omap_usb2",
272 	.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
273 	.mask = OMAP_DEV_PHY_PD,
274 	.power_off = OMAP_DEV_PHY_PD,
275 };
276 
277 static const struct usb_phy_data omap5_usb2_data = {
278 	.label = "omap5_usb2",
279 	.flags = 0,
280 	.mask = OMAP_DEV_PHY_PD,
281 	.power_off = OMAP_DEV_PHY_PD,
282 };
283 
284 static const struct usb_phy_data dra7x_usb2_data = {
285 	.label = "dra7x_usb2",
286 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
287 	.mask = OMAP_DEV_PHY_PD,
288 	.power_off = OMAP_DEV_PHY_PD,
289 };
290 
291 static const struct usb_phy_data dra7x_usb2_phy2_data = {
292 	.label = "dra7x_usb2_phy2",
293 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
294 	.mask = OMAP_USB2_PHY_PD,
295 	.power_off = OMAP_USB2_PHY_PD,
296 };
297 
298 static const struct usb_phy_data am437x_usb2_data = {
299 	.label = "am437x_usb2",
300 	.flags =  0,
301 	.mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
302 		AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
303 	.power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
304 	.power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
305 };
306 
307 static const struct usb_phy_data am654_usb2_data = {
308 	.label = "am654_usb2",
309 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
310 	.mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
311 		AM654_USB2_VBUSVALID_DET_EN,
312 	.power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
313 	.power_off = AM654_USB2_OTG_PD,
314 };
315 
316 static const struct of_device_id omap_usb2_id_table[] = {
317 	{
318 		.compatible = "ti,omap-usb2",
319 		.data = &omap_usb2_data,
320 	},
321 	{
322 		.compatible = "ti,omap5-usb2",
323 		.data = &omap5_usb2_data,
324 	},
325 	{
326 		.compatible = "ti,dra7x-usb2",
327 		.data = &dra7x_usb2_data,
328 	},
329 	{
330 		.compatible = "ti,dra7x-usb2-phy2",
331 		.data = &dra7x_usb2_phy2_data,
332 	},
333 	{
334 		.compatible = "ti,am437x-usb2",
335 		.data = &am437x_usb2_data,
336 	},
337 	{
338 		.compatible = "ti,am654-usb2",
339 		.data = &am654_usb2_data,
340 	},
341 	{},
342 };
343 MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
344 
345 static void omap_usb2_init_errata(struct omap_usb *phy)
346 {
347 	static const struct soc_device_attribute am65x_sr10_soc_devices[] = {
348 		{ .family = "AM65X", .revision = "SR1.0" },
349 		{ /* sentinel */ }
350 	};
351 
352 	/*
353 	 * Errata i2075: USB2PHY: USB2PHY Charger Detect is Enabled by
354 	 * Default Without VBUS Presence.
355 	 *
356 	 * AM654x SR1.0 has a silicon bug due to which D+ is pulled high after
357 	 * POR, which could cause enumeration failure with some USB hubs.
358 	 * Disabling the USB2_PHY Charger Detect function will put D+
359 	 * into the normal state.
360 	 */
361 	if (soc_device_match(am65x_sr10_soc_devices))
362 		phy->flags |= OMAP_USB2_DISABLE_CHRG_DET;
363 }
364 
365 static int omap_usb2_probe(struct platform_device *pdev)
366 {
367 	struct omap_usb	*phy;
368 	struct phy *generic_phy;
369 	struct phy_provider *phy_provider;
370 	struct usb_otg *otg;
371 	struct device_node *node = pdev->dev.of_node;
372 	struct device_node *control_node;
373 	struct platform_device *control_pdev;
374 	const struct of_device_id *of_id;
375 	struct usb_phy_data *phy_data;
376 
377 	of_id = of_match_device(omap_usb2_id_table, &pdev->dev);
378 
379 	if (!of_id)
380 		return -EINVAL;
381 
382 	phy_data = (struct usb_phy_data *)of_id->data;
383 
384 	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
385 	if (!phy)
386 		return -ENOMEM;
387 
388 	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
389 	if (!otg)
390 		return -ENOMEM;
391 
392 	phy->dev		= &pdev->dev;
393 
394 	phy->phy.dev		= phy->dev;
395 	phy->phy.label		= phy_data->label;
396 	phy->phy.otg		= otg;
397 	phy->phy.type		= USB_PHY_TYPE_USB2;
398 	phy->mask		= phy_data->mask;
399 	phy->power_on		= phy_data->power_on;
400 	phy->power_off		= phy_data->power_off;
401 	phy->flags		= phy_data->flags;
402 
403 	omap_usb2_init_errata(phy);
404 
405 	phy->phy_base = devm_platform_ioremap_resource(pdev, 0);
406 	if (IS_ERR(phy->phy_base))
407 		return PTR_ERR(phy->phy_base);
408 
409 	phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
410 								"syscon-phy-power");
411 	if (IS_ERR(phy->syscon_phy_power)) {
412 		dev_dbg(&pdev->dev,
413 			"can't get syscon-phy-power, using control device\n");
414 		phy->syscon_phy_power = NULL;
415 
416 		control_node = of_parse_phandle(node, "ctrl-module", 0);
417 		if (!control_node) {
418 			dev_err(&pdev->dev,
419 				"Failed to get control device phandle\n");
420 			return -EINVAL;
421 		}
422 
423 		control_pdev = of_find_device_by_node(control_node);
424 		if (!control_pdev) {
425 			dev_err(&pdev->dev, "Failed to get control device\n");
426 			return -EINVAL;
427 		}
428 		phy->control_dev = &control_pdev->dev;
429 	} else {
430 		if (of_property_read_u32_index(node,
431 					       "syscon-phy-power", 1,
432 					       &phy->power_reg)) {
433 			dev_err(&pdev->dev,
434 				"couldn't get power reg. offset\n");
435 			return -EINVAL;
436 		}
437 	}
438 
439 	phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
440 	if (IS_ERR(phy->wkupclk)) {
441 		if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
442 			return -EPROBE_DEFER;
443 
444 		dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
445 			 PTR_ERR(phy->wkupclk));
446 		phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
447 
448 		if (IS_ERR(phy->wkupclk))
449 			return dev_err_probe(&pdev->dev, PTR_ERR(phy->wkupclk),
450 					     "unable to get usb_phy_cm_clk32k\n");
451 
452 		dev_warn(&pdev->dev,
453 			 "found usb_phy_cm_clk32k, please fix DTS\n");
454 	}
455 
456 	phy->optclk = devm_clk_get(phy->dev, "refclk");
457 	if (IS_ERR(phy->optclk)) {
458 		if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
459 			return -EPROBE_DEFER;
460 
461 		dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
462 		phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
463 
464 		if (IS_ERR(phy->optclk)) {
465 			if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
466 				dev_dbg(&pdev->dev,
467 					"unable to get usb_otg_ss_refclk960m\n");
468 			}
469 		} else {
470 			dev_warn(&pdev->dev,
471 				 "found usb_otg_ss_refclk960m, please fix DTS\n");
472 		}
473 	}
474 
475 	otg->set_host = omap_usb_set_host;
476 	otg->set_peripheral = omap_usb_set_peripheral;
477 	if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
478 		otg->set_vbus = omap_usb_set_vbus;
479 	if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
480 		otg->start_srp = omap_usb_start_srp;
481 	otg->usb_phy = &phy->phy;
482 
483 	platform_set_drvdata(pdev, phy);
484 	pm_runtime_enable(phy->dev);
485 
486 	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
487 	if (IS_ERR(generic_phy)) {
488 		pm_runtime_disable(phy->dev);
489 		return PTR_ERR(generic_phy);
490 	}
491 
492 	phy_set_drvdata(generic_phy, phy);
493 	omap_usb_power_off(generic_phy);
494 
495 	phy_provider = devm_of_phy_provider_register(phy->dev,
496 						     of_phy_simple_xlate);
497 	if (IS_ERR(phy_provider)) {
498 		pm_runtime_disable(phy->dev);
499 		return PTR_ERR(phy_provider);
500 	}
501 
502 	usb_add_phy_dev(&phy->phy);
503 
504 	return 0;
505 }
506 
507 static void omap_usb2_remove(struct platform_device *pdev)
508 {
509 	struct omap_usb	*phy = platform_get_drvdata(pdev);
510 
511 	usb_remove_phy(&phy->phy);
512 	pm_runtime_disable(phy->dev);
513 }
514 
515 static struct platform_driver omap_usb2_driver = {
516 	.probe		= omap_usb2_probe,
517 	.remove_new	= omap_usb2_remove,
518 	.driver		= {
519 		.name	= "omap-usb2",
520 		.of_match_table = omap_usb2_id_table,
521 	},
522 };
523 
524 module_platform_driver(omap_usb2_driver);
525 
526 MODULE_ALIAS("platform:omap_usb2");
527 MODULE_AUTHOR("Texas Instruments Inc.");
528 MODULE_DESCRIPTION("OMAP USB2 phy driver");
529 MODULE_LICENSE("GPL v2");
530