xref: /openbmc/linux/drivers/phy/ti/phy-omap-usb2.c (revision 8365a898)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * omap-usb2.c - USB PHY, talking to USB controller on TI SoCs.
4  *
5  * Copyright (C) 2012-2020 Texas Instruments Incorporated - http://www.ti.com
6  * Author: Kishon Vijay Abraham I <kishon@ti.com>
7  */
8 
9 #include <linux/module.h>
10 #include <linux/platform_device.h>
11 #include <linux/slab.h>
12 #include <linux/of.h>
13 #include <linux/io.h>
14 #include <linux/phy/omap_usb.h>
15 #include <linux/usb/phy_companion.h>
16 #include <linux/clk.h>
17 #include <linux/err.h>
18 #include <linux/pm_runtime.h>
19 #include <linux/delay.h>
20 #include <linux/phy/omap_control_phy.h>
21 #include <linux/phy/phy.h>
22 #include <linux/mfd/syscon.h>
23 #include <linux/regmap.h>
24 #include <linux/of_platform.h>
25 
26 #define USB2PHY_ANA_CONFIG1		0x4c
27 #define USB2PHY_DISCON_BYP_LATCH	BIT(31)
28 
29 /* SoC Specific USB2_OTG register definitions */
30 #define AM654_USB2_OTG_PD		BIT(8)
31 #define AM654_USB2_VBUS_DET_EN		BIT(5)
32 #define AM654_USB2_VBUSVALID_DET_EN	BIT(4)
33 
34 #define OMAP_DEV_PHY_PD		BIT(0)
35 #define OMAP_USB2_PHY_PD	BIT(28)
36 
37 #define AM437X_USB2_PHY_PD		BIT(0)
38 #define AM437X_USB2_OTG_PD		BIT(1)
39 #define AM437X_USB2_OTGVDET_EN		BIT(19)
40 #define AM437X_USB2_OTGSESSEND_EN	BIT(20)
41 
42 /* Driver Flags */
43 #define OMAP_USB2_HAS_START_SRP			BIT(0)
44 #define OMAP_USB2_HAS_SET_VBUS			BIT(1)
45 #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT	BIT(2)
46 
47 struct omap_usb {
48 	struct usb_phy		phy;
49 	struct phy_companion	*comparator;
50 	void __iomem		*pll_ctrl_base;
51 	void __iomem		*phy_base;
52 	struct device		*dev;
53 	struct device		*control_dev;
54 	struct clk		*wkupclk;
55 	struct clk		*optclk;
56 	u8			flags;
57 	struct regmap		*syscon_phy_power; /* ctrl. reg. acces */
58 	unsigned int		power_reg; /* power reg. index within syscon */
59 	u32			mask;
60 	u32			power_on;
61 	u32			power_off;
62 };
63 
64 #define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
65 
66 struct usb_phy_data {
67 	const char *label;
68 	u8 flags;
69 	u32 mask;
70 	u32 power_on;
71 	u32 power_off;
72 };
73 
74 static inline u32 omap_usb_readl(void __iomem *addr, unsigned int offset)
75 {
76 	return __raw_readl(addr + offset);
77 }
78 
79 static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
80 				   u32 data)
81 {
82 	__raw_writel(data, addr + offset);
83 }
84 
85 /**
86  * omap_usb2_set_comparator - links the comparator present in the sytem with
87  *	this phy
88  * @comparator - the companion phy(comparator) for this phy
89  *
90  * The phy companion driver should call this API passing the phy_companion
91  * filled with set_vbus and start_srp to be used by usb phy.
92  *
93  * For use by phy companion driver
94  */
95 int omap_usb2_set_comparator(struct phy_companion *comparator)
96 {
97 	struct omap_usb	*phy;
98 	struct usb_phy	*x = usb_get_phy(USB_PHY_TYPE_USB2);
99 
100 	if (IS_ERR(x))
101 		return -ENODEV;
102 
103 	phy = phy_to_omapusb(x);
104 	phy->comparator = comparator;
105 	return 0;
106 }
107 EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
108 
109 static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
110 {
111 	struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
112 
113 	if (!phy->comparator)
114 		return -ENODEV;
115 
116 	return phy->comparator->set_vbus(phy->comparator, enabled);
117 }
118 
119 static int omap_usb_start_srp(struct usb_otg *otg)
120 {
121 	struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
122 
123 	if (!phy->comparator)
124 		return -ENODEV;
125 
126 	return phy->comparator->start_srp(phy->comparator);
127 }
128 
129 static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
130 {
131 	otg->host = host;
132 	if (!host)
133 		otg->state = OTG_STATE_UNDEFINED;
134 
135 	return 0;
136 }
137 
138 static int omap_usb_set_peripheral(struct usb_otg *otg,
139 		struct usb_gadget *gadget)
140 {
141 	otg->gadget = gadget;
142 	if (!gadget)
143 		otg->state = OTG_STATE_UNDEFINED;
144 
145 	return 0;
146 }
147 
148 static int omap_usb_phy_power(struct omap_usb *phy, int on)
149 {
150 	u32 val;
151 	int ret;
152 
153 	if (!phy->syscon_phy_power) {
154 		omap_control_phy_power(phy->control_dev, on);
155 		return 0;
156 	}
157 
158 	if (on)
159 		val = phy->power_on;
160 	else
161 		val = phy->power_off;
162 
163 	ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
164 				 phy->mask, val);
165 	return ret;
166 }
167 
168 static int omap_usb_power_off(struct phy *x)
169 {
170 	struct omap_usb *phy = phy_get_drvdata(x);
171 
172 	return omap_usb_phy_power(phy, false);
173 }
174 
175 static int omap_usb_power_on(struct phy *x)
176 {
177 	struct omap_usb *phy = phy_get_drvdata(x);
178 
179 	return omap_usb_phy_power(phy, true);
180 }
181 
182 static int omap_usb2_disable_clocks(struct omap_usb *phy)
183 {
184 	clk_disable_unprepare(phy->wkupclk);
185 	if (!IS_ERR(phy->optclk))
186 		clk_disable_unprepare(phy->optclk);
187 
188 	return 0;
189 }
190 
191 static int omap_usb2_enable_clocks(struct omap_usb *phy)
192 {
193 	int ret;
194 
195 	ret = clk_prepare_enable(phy->wkupclk);
196 	if (ret < 0) {
197 		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
198 		goto err0;
199 	}
200 
201 	if (!IS_ERR(phy->optclk)) {
202 		ret = clk_prepare_enable(phy->optclk);
203 		if (ret < 0) {
204 			dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
205 			goto err1;
206 		}
207 	}
208 
209 	return 0;
210 
211 err1:
212 	clk_disable(phy->wkupclk);
213 
214 err0:
215 	return ret;
216 }
217 
218 static int omap_usb_init(struct phy *x)
219 {
220 	struct omap_usb *phy = phy_get_drvdata(x);
221 	u32 val;
222 
223 	omap_usb2_enable_clocks(phy);
224 
225 	if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
226 		/*
227 		 *
228 		 * Reduce the sensitivity of internal PHY by enabling the
229 		 * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
230 		 * resolves issues with certain devices which can otherwise
231 		 * be prone to false disconnects.
232 		 *
233 		 */
234 		val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1);
235 		val |= USB2PHY_DISCON_BYP_LATCH;
236 		omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val);
237 	}
238 
239 	return 0;
240 }
241 
242 static int omap_usb_exit(struct phy *x)
243 {
244 	struct omap_usb *phy = phy_get_drvdata(x);
245 
246 	return omap_usb2_disable_clocks(phy);
247 }
248 
249 static const struct phy_ops ops = {
250 	.init		= omap_usb_init,
251 	.exit		= omap_usb_exit,
252 	.power_on	= omap_usb_power_on,
253 	.power_off	= omap_usb_power_off,
254 	.owner		= THIS_MODULE,
255 };
256 
257 static const struct usb_phy_data omap_usb2_data = {
258 	.label = "omap_usb2",
259 	.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
260 	.mask = OMAP_DEV_PHY_PD,
261 	.power_off = OMAP_DEV_PHY_PD,
262 };
263 
264 static const struct usb_phy_data omap5_usb2_data = {
265 	.label = "omap5_usb2",
266 	.flags = 0,
267 	.mask = OMAP_DEV_PHY_PD,
268 	.power_off = OMAP_DEV_PHY_PD,
269 };
270 
271 static const struct usb_phy_data dra7x_usb2_data = {
272 	.label = "dra7x_usb2",
273 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
274 	.mask = OMAP_DEV_PHY_PD,
275 	.power_off = OMAP_DEV_PHY_PD,
276 };
277 
278 static const struct usb_phy_data dra7x_usb2_phy2_data = {
279 	.label = "dra7x_usb2_phy2",
280 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
281 	.mask = OMAP_USB2_PHY_PD,
282 	.power_off = OMAP_USB2_PHY_PD,
283 };
284 
285 static const struct usb_phy_data am437x_usb2_data = {
286 	.label = "am437x_usb2",
287 	.flags =  0,
288 	.mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
289 		AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
290 	.power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
291 	.power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
292 };
293 
294 static const struct usb_phy_data am654_usb2_data = {
295 	.label = "am654_usb2",
296 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
297 	.mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
298 		AM654_USB2_VBUSVALID_DET_EN,
299 	.power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
300 	.power_off = AM654_USB2_OTG_PD,
301 };
302 
303 static const struct of_device_id omap_usb2_id_table[] = {
304 	{
305 		.compatible = "ti,omap-usb2",
306 		.data = &omap_usb2_data,
307 	},
308 	{
309 		.compatible = "ti,omap5-usb2",
310 		.data = &omap5_usb2_data,
311 	},
312 	{
313 		.compatible = "ti,dra7x-usb2",
314 		.data = &dra7x_usb2_data,
315 	},
316 	{
317 		.compatible = "ti,dra7x-usb2-phy2",
318 		.data = &dra7x_usb2_phy2_data,
319 	},
320 	{
321 		.compatible = "ti,am437x-usb2",
322 		.data = &am437x_usb2_data,
323 	},
324 	{
325 		.compatible = "ti,am654-usb2",
326 		.data = &am654_usb2_data,
327 	},
328 	{},
329 };
330 MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
331 
332 static int omap_usb2_probe(struct platform_device *pdev)
333 {
334 	struct omap_usb	*phy;
335 	struct phy *generic_phy;
336 	struct resource *res;
337 	struct phy_provider *phy_provider;
338 	struct usb_otg *otg;
339 	struct device_node *node = pdev->dev.of_node;
340 	struct device_node *control_node;
341 	struct platform_device *control_pdev;
342 	const struct of_device_id *of_id;
343 	struct usb_phy_data *phy_data;
344 
345 	of_id = of_match_device(omap_usb2_id_table, &pdev->dev);
346 
347 	if (!of_id)
348 		return -EINVAL;
349 
350 	phy_data = (struct usb_phy_data *)of_id->data;
351 
352 	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
353 	if (!phy)
354 		return -ENOMEM;
355 
356 	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
357 	if (!otg)
358 		return -ENOMEM;
359 
360 	phy->dev		= &pdev->dev;
361 
362 	phy->phy.dev		= phy->dev;
363 	phy->phy.label		= phy_data->label;
364 	phy->phy.otg		= otg;
365 	phy->phy.type		= USB_PHY_TYPE_USB2;
366 	phy->mask		= phy_data->mask;
367 	phy->power_on		= phy_data->power_on;
368 	phy->power_off		= phy_data->power_off;
369 
370 	if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
371 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
372 		phy->phy_base = devm_ioremap_resource(&pdev->dev, res);
373 		if (IS_ERR(phy->phy_base))
374 			return PTR_ERR(phy->phy_base);
375 		phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
376 	}
377 
378 	phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
379 							"syscon-phy-power");
380 	if (IS_ERR(phy->syscon_phy_power)) {
381 		dev_dbg(&pdev->dev,
382 			"can't get syscon-phy-power, using control device\n");
383 		phy->syscon_phy_power = NULL;
384 
385 		control_node = of_parse_phandle(node, "ctrl-module", 0);
386 		if (!control_node) {
387 			dev_err(&pdev->dev,
388 				"Failed to get control device phandle\n");
389 			return -EINVAL;
390 		}
391 
392 		control_pdev = of_find_device_by_node(control_node);
393 		if (!control_pdev) {
394 			dev_err(&pdev->dev, "Failed to get control device\n");
395 			return -EINVAL;
396 		}
397 		phy->control_dev = &control_pdev->dev;
398 	} else {
399 		if (of_property_read_u32_index(node,
400 					       "syscon-phy-power", 1,
401 					       &phy->power_reg)) {
402 			dev_err(&pdev->dev,
403 				"couldn't get power reg. offset\n");
404 			return -EINVAL;
405 		}
406 	}
407 
408 
409 	phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
410 	if (IS_ERR(phy->wkupclk)) {
411 		if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
412 			return -EPROBE_DEFER;
413 
414 		dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
415 			 PTR_ERR(phy->wkupclk));
416 		phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
417 
418 		if (IS_ERR(phy->wkupclk)) {
419 			if (PTR_ERR(phy->wkupclk) != -EPROBE_DEFER)
420 				dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
421 			return PTR_ERR(phy->wkupclk);
422 		} else {
423 			dev_warn(&pdev->dev,
424 				 "found usb_phy_cm_clk32k, please fix DTS\n");
425 		}
426 	}
427 
428 	phy->optclk = devm_clk_get(phy->dev, "refclk");
429 	if (IS_ERR(phy->optclk)) {
430 		if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
431 			return -EPROBE_DEFER;
432 
433 		dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
434 		phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
435 
436 		if (IS_ERR(phy->optclk)) {
437 			if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
438 				dev_dbg(&pdev->dev,
439 					"unable to get usb_otg_ss_refclk960m\n");
440 			}
441 		} else {
442 			dev_warn(&pdev->dev,
443 				 "found usb_otg_ss_refclk960m, please fix DTS\n");
444 		}
445 	}
446 
447 	otg->set_host = omap_usb_set_host;
448 	otg->set_peripheral = omap_usb_set_peripheral;
449 	if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
450 		otg->set_vbus = omap_usb_set_vbus;
451 	if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
452 		otg->start_srp = omap_usb_start_srp;
453 	otg->usb_phy = &phy->phy;
454 
455 	platform_set_drvdata(pdev, phy);
456 	pm_runtime_enable(phy->dev);
457 
458 	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
459 	if (IS_ERR(generic_phy)) {
460 		pm_runtime_disable(phy->dev);
461 		return PTR_ERR(generic_phy);
462 	}
463 
464 	phy_set_drvdata(generic_phy, phy);
465 	omap_usb_power_off(generic_phy);
466 
467 	phy_provider = devm_of_phy_provider_register(phy->dev,
468 						     of_phy_simple_xlate);
469 	if (IS_ERR(phy_provider)) {
470 		pm_runtime_disable(phy->dev);
471 		return PTR_ERR(phy_provider);
472 	}
473 
474 
475 	usb_add_phy_dev(&phy->phy);
476 
477 	return 0;
478 }
479 
480 static int omap_usb2_remove(struct platform_device *pdev)
481 {
482 	struct omap_usb	*phy = platform_get_drvdata(pdev);
483 
484 	usb_remove_phy(&phy->phy);
485 	pm_runtime_disable(phy->dev);
486 
487 	return 0;
488 }
489 
490 static struct platform_driver omap_usb2_driver = {
491 	.probe		= omap_usb2_probe,
492 	.remove		= omap_usb2_remove,
493 	.driver		= {
494 		.name	= "omap-usb2",
495 		.of_match_table = omap_usb2_id_table,
496 	},
497 };
498 
499 module_platform_driver(omap_usb2_driver);
500 
501 MODULE_ALIAS("platform:omap_usb2");
502 MODULE_AUTHOR("Texas Instruments Inc.");
503 MODULE_DESCRIPTION("OMAP USB2 phy driver");
504 MODULE_LICENSE("GPL v2");
505