1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * omap-usb2.c - USB PHY, talking to USB controller on TI SoCs. 4 * 5 * Copyright (C) 2012-2020 Texas Instruments Incorporated - http://www.ti.com 6 * Author: Kishon Vijay Abraham I <kishon@ti.com> 7 */ 8 9 #include <linux/clk.h> 10 #include <linux/delay.h> 11 #include <linux/err.h> 12 #include <linux/io.h> 13 #include <linux/mfd/syscon.h> 14 #include <linux/module.h> 15 #include <linux/of.h> 16 #include <linux/of_platform.h> 17 #include <linux/phy/omap_control_phy.h> 18 #include <linux/phy/omap_usb.h> 19 #include <linux/phy/phy.h> 20 #include <linux/platform_device.h> 21 #include <linux/pm_runtime.h> 22 #include <linux/regmap.h> 23 #include <linux/slab.h> 24 #include <linux/sys_soc.h> 25 #include <linux/usb/phy_companion.h> 26 27 #define USB2PHY_ANA_CONFIG1 0x4c 28 #define USB2PHY_DISCON_BYP_LATCH BIT(31) 29 30 #define USB2PHY_CHRG_DET 0x14 31 #define USB2PHY_CHRG_DET_USE_CHG_DET_REG BIT(29) 32 #define USB2PHY_CHRG_DET_DIS_CHG_DET BIT(28) 33 34 /* SoC Specific USB2_OTG register definitions */ 35 #define AM654_USB2_OTG_PD BIT(8) 36 #define AM654_USB2_VBUS_DET_EN BIT(5) 37 #define AM654_USB2_VBUSVALID_DET_EN BIT(4) 38 39 #define OMAP_DEV_PHY_PD BIT(0) 40 #define OMAP_USB2_PHY_PD BIT(28) 41 42 #define AM437X_USB2_PHY_PD BIT(0) 43 #define AM437X_USB2_OTG_PD BIT(1) 44 #define AM437X_USB2_OTGVDET_EN BIT(19) 45 #define AM437X_USB2_OTGSESSEND_EN BIT(20) 46 47 /* Driver Flags */ 48 #define OMAP_USB2_HAS_START_SRP BIT(0) 49 #define OMAP_USB2_HAS_SET_VBUS BIT(1) 50 #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT BIT(2) 51 #define OMAP_USB2_DISABLE_CHRG_DET BIT(3) 52 53 struct omap_usb { 54 struct usb_phy phy; 55 struct phy_companion *comparator; 56 void __iomem *pll_ctrl_base; 57 void __iomem *phy_base; 58 struct device *dev; 59 struct device *control_dev; 60 struct clk *wkupclk; 61 struct clk *optclk; 62 u8 flags; 63 struct regmap *syscon_phy_power; /* ctrl. reg. acces */ 64 unsigned int power_reg; /* power reg. index within syscon */ 65 u32 mask; 66 u32 power_on; 67 u32 power_off; 68 }; 69 70 #define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) 71 72 struct usb_phy_data { 73 const char *label; 74 u8 flags; 75 u32 mask; 76 u32 power_on; 77 u32 power_off; 78 }; 79 80 static inline u32 omap_usb_readl(void __iomem *addr, unsigned int offset) 81 { 82 return __raw_readl(addr + offset); 83 } 84 85 static inline void omap_usb_writel(void __iomem *addr, unsigned int offset, 86 u32 data) 87 { 88 __raw_writel(data, addr + offset); 89 } 90 91 /** 92 * omap_usb2_set_comparator() - links the comparator present in the system with this phy 93 * 94 * @comparator: the companion phy(comparator) for this phy 95 * 96 * The phy companion driver should call this API passing the phy_companion 97 * filled with set_vbus and start_srp to be used by usb phy. 98 * 99 * For use by phy companion driver 100 */ 101 int omap_usb2_set_comparator(struct phy_companion *comparator) 102 { 103 struct omap_usb *phy; 104 struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2); 105 106 if (IS_ERR(x)) 107 return -ENODEV; 108 109 phy = phy_to_omapusb(x); 110 phy->comparator = comparator; 111 return 0; 112 } 113 EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); 114 115 static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) 116 { 117 struct omap_usb *phy = phy_to_omapusb(otg->usb_phy); 118 119 if (!phy->comparator) 120 return -ENODEV; 121 122 return phy->comparator->set_vbus(phy->comparator, enabled); 123 } 124 125 static int omap_usb_start_srp(struct usb_otg *otg) 126 { 127 struct omap_usb *phy = phy_to_omapusb(otg->usb_phy); 128 129 if (!phy->comparator) 130 return -ENODEV; 131 132 return phy->comparator->start_srp(phy->comparator); 133 } 134 135 static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) 136 { 137 otg->host = host; 138 if (!host) 139 otg->state = OTG_STATE_UNDEFINED; 140 141 return 0; 142 } 143 144 static int omap_usb_set_peripheral(struct usb_otg *otg, 145 struct usb_gadget *gadget) 146 { 147 otg->gadget = gadget; 148 if (!gadget) 149 otg->state = OTG_STATE_UNDEFINED; 150 151 return 0; 152 } 153 154 static int omap_usb_phy_power(struct omap_usb *phy, int on) 155 { 156 u32 val; 157 int ret; 158 159 if (!phy->syscon_phy_power) { 160 omap_control_phy_power(phy->control_dev, on); 161 return 0; 162 } 163 164 if (on) 165 val = phy->power_on; 166 else 167 val = phy->power_off; 168 169 ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg, 170 phy->mask, val); 171 return ret; 172 } 173 174 static int omap_usb_power_off(struct phy *x) 175 { 176 struct omap_usb *phy = phy_get_drvdata(x); 177 178 return omap_usb_phy_power(phy, false); 179 } 180 181 static int omap_usb_power_on(struct phy *x) 182 { 183 struct omap_usb *phy = phy_get_drvdata(x); 184 185 return omap_usb_phy_power(phy, true); 186 } 187 188 static int omap_usb2_disable_clocks(struct omap_usb *phy) 189 { 190 clk_disable_unprepare(phy->wkupclk); 191 if (!IS_ERR(phy->optclk)) 192 clk_disable_unprepare(phy->optclk); 193 194 return 0; 195 } 196 197 static int omap_usb2_enable_clocks(struct omap_usb *phy) 198 { 199 int ret; 200 201 ret = clk_prepare_enable(phy->wkupclk); 202 if (ret < 0) { 203 dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); 204 goto err0; 205 } 206 207 if (!IS_ERR(phy->optclk)) { 208 ret = clk_prepare_enable(phy->optclk); 209 if (ret < 0) { 210 dev_err(phy->dev, "Failed to enable optclk %d\n", ret); 211 goto err1; 212 } 213 } 214 215 return 0; 216 217 err1: 218 clk_disable_unprepare(phy->wkupclk); 219 220 err0: 221 return ret; 222 } 223 224 static int omap_usb_init(struct phy *x) 225 { 226 struct omap_usb *phy = phy_get_drvdata(x); 227 u32 val; 228 229 omap_usb2_enable_clocks(phy); 230 231 if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { 232 /* 233 * 234 * Reduce the sensitivity of internal PHY by enabling the 235 * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This 236 * resolves issues with certain devices which can otherwise 237 * be prone to false disconnects. 238 * 239 */ 240 val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1); 241 val |= USB2PHY_DISCON_BYP_LATCH; 242 omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val); 243 } 244 245 if (phy->flags & OMAP_USB2_DISABLE_CHRG_DET) { 246 val = omap_usb_readl(phy->phy_base, USB2PHY_CHRG_DET); 247 val |= USB2PHY_CHRG_DET_USE_CHG_DET_REG | 248 USB2PHY_CHRG_DET_DIS_CHG_DET; 249 omap_usb_writel(phy->phy_base, USB2PHY_CHRG_DET, val); 250 } 251 252 return 0; 253 } 254 255 static int omap_usb_exit(struct phy *x) 256 { 257 struct omap_usb *phy = phy_get_drvdata(x); 258 259 return omap_usb2_disable_clocks(phy); 260 } 261 262 static const struct phy_ops ops = { 263 .init = omap_usb_init, 264 .exit = omap_usb_exit, 265 .power_on = omap_usb_power_on, 266 .power_off = omap_usb_power_off, 267 .owner = THIS_MODULE, 268 }; 269 270 static const struct usb_phy_data omap_usb2_data = { 271 .label = "omap_usb2", 272 .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS, 273 .mask = OMAP_DEV_PHY_PD, 274 .power_off = OMAP_DEV_PHY_PD, 275 }; 276 277 static const struct usb_phy_data omap5_usb2_data = { 278 .label = "omap5_usb2", 279 .flags = 0, 280 .mask = OMAP_DEV_PHY_PD, 281 .power_off = OMAP_DEV_PHY_PD, 282 }; 283 284 static const struct usb_phy_data dra7x_usb2_data = { 285 .label = "dra7x_usb2", 286 .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, 287 .mask = OMAP_DEV_PHY_PD, 288 .power_off = OMAP_DEV_PHY_PD, 289 }; 290 291 static const struct usb_phy_data dra7x_usb2_phy2_data = { 292 .label = "dra7x_usb2_phy2", 293 .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, 294 .mask = OMAP_USB2_PHY_PD, 295 .power_off = OMAP_USB2_PHY_PD, 296 }; 297 298 static const struct usb_phy_data am437x_usb2_data = { 299 .label = "am437x_usb2", 300 .flags = 0, 301 .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD | 302 AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN, 303 .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN, 304 .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD, 305 }; 306 307 static const struct usb_phy_data am654_usb2_data = { 308 .label = "am654_usb2", 309 .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, 310 .mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN | 311 AM654_USB2_VBUSVALID_DET_EN, 312 .power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN, 313 .power_off = AM654_USB2_OTG_PD, 314 }; 315 316 static const struct of_device_id omap_usb2_id_table[] = { 317 { 318 .compatible = "ti,omap-usb2", 319 .data = &omap_usb2_data, 320 }, 321 { 322 .compatible = "ti,omap5-usb2", 323 .data = &omap5_usb2_data, 324 }, 325 { 326 .compatible = "ti,dra7x-usb2", 327 .data = &dra7x_usb2_data, 328 }, 329 { 330 .compatible = "ti,dra7x-usb2-phy2", 331 .data = &dra7x_usb2_phy2_data, 332 }, 333 { 334 .compatible = "ti,am437x-usb2", 335 .data = &am437x_usb2_data, 336 }, 337 { 338 .compatible = "ti,am654-usb2", 339 .data = &am654_usb2_data, 340 }, 341 {}, 342 }; 343 MODULE_DEVICE_TABLE(of, omap_usb2_id_table); 344 345 static void omap_usb2_init_errata(struct omap_usb *phy) 346 { 347 static const struct soc_device_attribute am65x_sr10_soc_devices[] = { 348 { .family = "AM65X", .revision = "SR1.0" }, 349 { /* sentinel */ } 350 }; 351 352 /* 353 * Errata i2075: USB2PHY: USB2PHY Charger Detect is Enabled by 354 * Default Without VBUS Presence. 355 * 356 * AM654x SR1.0 has a silicon bug due to which D+ is pulled high after 357 * POR, which could cause enumeration failure with some USB hubs. 358 * Disabling the USB2_PHY Charger Detect function will put D+ 359 * into the normal state. 360 */ 361 if (soc_device_match(am65x_sr10_soc_devices)) 362 phy->flags |= OMAP_USB2_DISABLE_CHRG_DET; 363 } 364 365 static int omap_usb2_probe(struct platform_device *pdev) 366 { 367 struct omap_usb *phy; 368 struct phy *generic_phy; 369 struct phy_provider *phy_provider; 370 struct usb_otg *otg; 371 struct device_node *node = pdev->dev.of_node; 372 struct device_node *control_node; 373 struct platform_device *control_pdev; 374 const struct of_device_id *of_id; 375 struct usb_phy_data *phy_data; 376 377 of_id = of_match_device(omap_usb2_id_table, &pdev->dev); 378 379 if (!of_id) 380 return -EINVAL; 381 382 phy_data = (struct usb_phy_data *)of_id->data; 383 384 phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); 385 if (!phy) 386 return -ENOMEM; 387 388 otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); 389 if (!otg) 390 return -ENOMEM; 391 392 phy->dev = &pdev->dev; 393 394 phy->phy.dev = phy->dev; 395 phy->phy.label = phy_data->label; 396 phy->phy.otg = otg; 397 phy->phy.type = USB_PHY_TYPE_USB2; 398 phy->mask = phy_data->mask; 399 phy->power_on = phy_data->power_on; 400 phy->power_off = phy_data->power_off; 401 phy->flags = phy_data->flags; 402 403 omap_usb2_init_errata(phy); 404 405 phy->phy_base = devm_platform_ioremap_resource(pdev, 0); 406 if (IS_ERR(phy->phy_base)) 407 return PTR_ERR(phy->phy_base); 408 409 phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node, 410 "syscon-phy-power"); 411 if (IS_ERR(phy->syscon_phy_power)) { 412 dev_dbg(&pdev->dev, 413 "can't get syscon-phy-power, using control device\n"); 414 phy->syscon_phy_power = NULL; 415 416 control_node = of_parse_phandle(node, "ctrl-module", 0); 417 if (!control_node) { 418 dev_err(&pdev->dev, 419 "Failed to get control device phandle\n"); 420 return -EINVAL; 421 } 422 423 control_pdev = of_find_device_by_node(control_node); 424 if (!control_pdev) { 425 dev_err(&pdev->dev, "Failed to get control device\n"); 426 return -EINVAL; 427 } 428 phy->control_dev = &control_pdev->dev; 429 } else { 430 if (of_property_read_u32_index(node, 431 "syscon-phy-power", 1, 432 &phy->power_reg)) { 433 dev_err(&pdev->dev, 434 "couldn't get power reg. offset\n"); 435 return -EINVAL; 436 } 437 } 438 439 phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); 440 if (IS_ERR(phy->wkupclk)) { 441 if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER) 442 return -EPROBE_DEFER; 443 444 dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n", 445 PTR_ERR(phy->wkupclk)); 446 phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); 447 448 if (IS_ERR(phy->wkupclk)) { 449 if (PTR_ERR(phy->wkupclk) != -EPROBE_DEFER) 450 dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); 451 return PTR_ERR(phy->wkupclk); 452 } 453 454 dev_warn(&pdev->dev, 455 "found usb_phy_cm_clk32k, please fix DTS\n"); 456 } 457 458 phy->optclk = devm_clk_get(phy->dev, "refclk"); 459 if (IS_ERR(phy->optclk)) { 460 if (PTR_ERR(phy->optclk) == -EPROBE_DEFER) 461 return -EPROBE_DEFER; 462 463 dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n"); 464 phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); 465 466 if (IS_ERR(phy->optclk)) { 467 if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) { 468 dev_dbg(&pdev->dev, 469 "unable to get usb_otg_ss_refclk960m\n"); 470 } 471 } else { 472 dev_warn(&pdev->dev, 473 "found usb_otg_ss_refclk960m, please fix DTS\n"); 474 } 475 } 476 477 otg->set_host = omap_usb_set_host; 478 otg->set_peripheral = omap_usb_set_peripheral; 479 if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS) 480 otg->set_vbus = omap_usb_set_vbus; 481 if (phy_data->flags & OMAP_USB2_HAS_START_SRP) 482 otg->start_srp = omap_usb_start_srp; 483 otg->usb_phy = &phy->phy; 484 485 platform_set_drvdata(pdev, phy); 486 pm_runtime_enable(phy->dev); 487 488 generic_phy = devm_phy_create(phy->dev, NULL, &ops); 489 if (IS_ERR(generic_phy)) { 490 pm_runtime_disable(phy->dev); 491 return PTR_ERR(generic_phy); 492 } 493 494 phy_set_drvdata(generic_phy, phy); 495 omap_usb_power_off(generic_phy); 496 497 phy_provider = devm_of_phy_provider_register(phy->dev, 498 of_phy_simple_xlate); 499 if (IS_ERR(phy_provider)) { 500 pm_runtime_disable(phy->dev); 501 return PTR_ERR(phy_provider); 502 } 503 504 usb_add_phy_dev(&phy->phy); 505 506 return 0; 507 } 508 509 static int omap_usb2_remove(struct platform_device *pdev) 510 { 511 struct omap_usb *phy = platform_get_drvdata(pdev); 512 513 usb_remove_phy(&phy->phy); 514 pm_runtime_disable(phy->dev); 515 516 return 0; 517 } 518 519 static struct platform_driver omap_usb2_driver = { 520 .probe = omap_usb2_probe, 521 .remove = omap_usb2_remove, 522 .driver = { 523 .name = "omap-usb2", 524 .of_match_table = omap_usb2_id_table, 525 }, 526 }; 527 528 module_platform_driver(omap_usb2_driver); 529 530 MODULE_ALIAS("platform:omap_usb2"); 531 MODULE_AUTHOR("Texas Instruments Inc."); 532 MODULE_DESCRIPTION("OMAP USB2 phy driver"); 533 MODULE_LICENSE("GPL v2"); 534