1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * omap-control-phy.c - The PHY part of control module.
4  *
5  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
6  * Author: Kishon Vijay Abraham I <kishon@ti.com>
7  */
8 
9 #include <linux/module.h>
10 #include <linux/platform_device.h>
11 #include <linux/slab.h>
12 #include <linux/of.h>
13 #include <linux/of_device.h>
14 #include <linux/err.h>
15 #include <linux/io.h>
16 #include <linux/clk.h>
17 #include <linux/phy/omap_control_phy.h>
18 
19 /**
20  * omap_control_pcie_pcs - set the PCS delay count
21  * @dev: the control module device
22  * @delay: 8 bit delay value
23  */
24 void omap_control_pcie_pcs(struct device *dev, u8 delay)
25 {
26 	u32 val;
27 	struct omap_control_phy	*control_phy;
28 
29 	if (IS_ERR_OR_NULL(dev)) {
30 		pr_err("%s: invalid device\n", __func__);
31 		return;
32 	}
33 
34 	control_phy = dev_get_drvdata(dev);
35 	if (!control_phy) {
36 		dev_err(dev, "%s: invalid control phy device\n", __func__);
37 		return;
38 	}
39 
40 	if (control_phy->type != OMAP_CTRL_TYPE_PCIE) {
41 		dev_err(dev, "%s: unsupported operation\n", __func__);
42 		return;
43 	}
44 
45 	val = readl(control_phy->pcie_pcs);
46 	val &= ~(OMAP_CTRL_PCIE_PCS_MASK <<
47 		OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
48 	val |= (delay << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
49 	writel(val, control_phy->pcie_pcs);
50 }
51 EXPORT_SYMBOL_GPL(omap_control_pcie_pcs);
52 
53 /**
54  * omap_control_phy_power - power on/off the phy using control module reg
55  * @dev: the control module device
56  * @on: 0 or 1, based on powering on or off the PHY
57  */
58 void omap_control_phy_power(struct device *dev, int on)
59 {
60 	u32 val;
61 	unsigned long rate;
62 	struct omap_control_phy	*control_phy;
63 
64 	if (IS_ERR_OR_NULL(dev)) {
65 		pr_err("%s: invalid device\n", __func__);
66 		return;
67 	}
68 
69 	control_phy = dev_get_drvdata(dev);
70 	if (!control_phy) {
71 		dev_err(dev, "%s: invalid control phy device\n", __func__);
72 		return;
73 	}
74 
75 	if (control_phy->type == OMAP_CTRL_TYPE_OTGHS)
76 		return;
77 
78 	val = readl(control_phy->power);
79 
80 	switch (control_phy->type) {
81 	case OMAP_CTRL_TYPE_USB2:
82 		if (on)
83 			val &= ~OMAP_CTRL_DEV_PHY_PD;
84 		else
85 			val |= OMAP_CTRL_DEV_PHY_PD;
86 		break;
87 
88 	case OMAP_CTRL_TYPE_PCIE:
89 	case OMAP_CTRL_TYPE_PIPE3:
90 		rate = clk_get_rate(control_phy->sys_clk);
91 		rate = rate/1000000;
92 
93 		if (on) {
94 			val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
95 				OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
96 			val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
97 				OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
98 			val |= rate <<
99 				OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
100 		} else {
101 			val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
102 			val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
103 				OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
104 		}
105 		break;
106 
107 	case OMAP_CTRL_TYPE_DRA7USB2:
108 		if (on)
109 			val &= ~OMAP_CTRL_USB2_PHY_PD;
110 		else
111 			val |= OMAP_CTRL_USB2_PHY_PD;
112 		break;
113 
114 	case OMAP_CTRL_TYPE_AM437USB2:
115 		if (on) {
116 			val &= ~(AM437X_CTRL_USB2_PHY_PD |
117 					AM437X_CTRL_USB2_OTG_PD);
118 			val |= (AM437X_CTRL_USB2_OTGVDET_EN |
119 					AM437X_CTRL_USB2_OTGSESSEND_EN);
120 		} else {
121 			val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
122 					AM437X_CTRL_USB2_OTGSESSEND_EN);
123 			val |= (AM437X_CTRL_USB2_PHY_PD |
124 					 AM437X_CTRL_USB2_OTG_PD);
125 		}
126 		break;
127 	default:
128 		dev_err(dev, "%s: type %d not recognized\n",
129 			__func__, control_phy->type);
130 		break;
131 	}
132 
133 	writel(val, control_phy->power);
134 }
135 EXPORT_SYMBOL_GPL(omap_control_phy_power);
136 
137 /**
138  * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
139  * @ctrl_phy: struct omap_control_phy *
140  *
141  * Writes to the mailbox register to notify the usb core that a usb
142  * device has been connected.
143  */
144 static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy)
145 {
146 	u32 val;
147 
148 	val = readl(ctrl_phy->otghs_control);
149 	val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
150 	val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
151 	writel(val, ctrl_phy->otghs_control);
152 }
153 
154 /**
155  * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
156  * impedance
157  * @ctrl_phy: struct omap_control_phy *
158  *
159  * Writes to the mailbox register to notify the usb core that it has been
160  * connected to a usb host.
161  */
162 static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy)
163 {
164 	u32 val;
165 
166 	val = readl(ctrl_phy->otghs_control);
167 	val &= ~OMAP_CTRL_DEV_SESSEND;
168 	val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
169 		OMAP_CTRL_DEV_VBUSVALID;
170 	writel(val, ctrl_phy->otghs_control);
171 }
172 
173 /**
174  * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
175  * impedance
176  * @ctrl_phy: struct omap_control_phy *
177  *
178  * Writes to the mailbox register to notify the usb core it's now in
179  * disconnected state.
180  */
181 static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy)
182 {
183 	u32 val;
184 
185 	val = readl(ctrl_phy->otghs_control);
186 	val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
187 	val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
188 	writel(val, ctrl_phy->otghs_control);
189 }
190 
191 /**
192  * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode
193  * or device mode or to denote disconnected state
194  * @dev: the control module device
195  * @mode: The mode to which usb should be configured
196  *
197  * This is an API to write to the mailbox register to notify the usb core that
198  * a usb device has been connected.
199  */
200 void omap_control_usb_set_mode(struct device *dev,
201 	enum omap_control_usb_mode mode)
202 {
203 	struct omap_control_phy	*ctrl_phy;
204 
205 	if (IS_ERR_OR_NULL(dev))
206 		return;
207 
208 	ctrl_phy = dev_get_drvdata(dev);
209 	if (!ctrl_phy) {
210 		dev_err(dev, "Invalid control phy device\n");
211 		return;
212 	}
213 
214 	if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS)
215 		return;
216 
217 	switch (mode) {
218 	case USB_MODE_HOST:
219 		omap_control_usb_host_mode(ctrl_phy);
220 		break;
221 	case USB_MODE_DEVICE:
222 		omap_control_usb_device_mode(ctrl_phy);
223 		break;
224 	case USB_MODE_DISCONNECT:
225 		omap_control_usb_set_sessionend(ctrl_phy);
226 		break;
227 	default:
228 		dev_vdbg(dev, "invalid omap control usb mode\n");
229 	}
230 }
231 EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
232 
233 static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
234 static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
235 static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
236 static const enum omap_control_phy_type pcie_data = OMAP_CTRL_TYPE_PCIE;
237 static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
238 static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
239 
240 static const struct of_device_id omap_control_phy_id_table[] = {
241 	{
242 		.compatible = "ti,control-phy-otghs",
243 		.data = &otghs_data,
244 	},
245 	{
246 		.compatible = "ti,control-phy-usb2",
247 		.data = &usb2_data,
248 	},
249 	{
250 		.compatible = "ti,control-phy-pipe3",
251 		.data = &pipe3_data,
252 	},
253 	{
254 		.compatible = "ti,control-phy-pcie",
255 		.data = &pcie_data,
256 	},
257 	{
258 		.compatible = "ti,control-phy-usb2-dra7",
259 		.data = &dra7usb2_data,
260 	},
261 	{
262 		.compatible = "ti,control-phy-usb2-am437",
263 		.data = &am437usb2_data,
264 	},
265 	{},
266 };
267 MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);
268 
269 static int omap_control_phy_probe(struct platform_device *pdev)
270 {
271 	const struct of_device_id *of_id;
272 	struct omap_control_phy *control_phy;
273 
274 	of_id = of_match_device(omap_control_phy_id_table, &pdev->dev);
275 	if (!of_id)
276 		return -EINVAL;
277 
278 	control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy),
279 		GFP_KERNEL);
280 	if (!control_phy)
281 		return -ENOMEM;
282 
283 	control_phy->dev = &pdev->dev;
284 	control_phy->type = *(enum omap_control_phy_type *)of_id->data;
285 
286 	if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) {
287 		control_phy->otghs_control =
288 			devm_platform_ioremap_resource_byname(pdev, "otghs_control");
289 		if (IS_ERR(control_phy->otghs_control))
290 			return PTR_ERR(control_phy->otghs_control);
291 	} else {
292 		control_phy->power =
293 			devm_platform_ioremap_resource_byname(pdev, "power");
294 		if (IS_ERR(control_phy->power)) {
295 			dev_err(&pdev->dev, "Couldn't get power register\n");
296 			return PTR_ERR(control_phy->power);
297 		}
298 	}
299 
300 	if (control_phy->type == OMAP_CTRL_TYPE_PIPE3 ||
301 	    control_phy->type == OMAP_CTRL_TYPE_PCIE) {
302 		control_phy->sys_clk = devm_clk_get(control_phy->dev,
303 			"sys_clkin");
304 		if (IS_ERR(control_phy->sys_clk)) {
305 			pr_err("%s: unable to get sys_clkin\n", __func__);
306 			return -EINVAL;
307 		}
308 	}
309 
310 	if (control_phy->type == OMAP_CTRL_TYPE_PCIE) {
311 		control_phy->pcie_pcs =
312 			devm_platform_ioremap_resource_byname(pdev, "pcie_pcs");
313 		if (IS_ERR(control_phy->pcie_pcs))
314 			return PTR_ERR(control_phy->pcie_pcs);
315 	}
316 
317 	dev_set_drvdata(control_phy->dev, control_phy);
318 
319 	return 0;
320 }
321 
322 static struct platform_driver omap_control_phy_driver = {
323 	.probe		= omap_control_phy_probe,
324 	.driver		= {
325 		.name	= "omap-control-phy",
326 		.of_match_table = omap_control_phy_id_table,
327 	},
328 };
329 
330 static int __init omap_control_phy_init(void)
331 {
332 	return platform_driver_register(&omap_control_phy_driver);
333 }
334 subsys_initcall(omap_control_phy_init);
335 
336 static void __exit omap_control_phy_exit(void)
337 {
338 	platform_driver_unregister(&omap_control_phy_driver);
339 }
340 module_exit(omap_control_phy_exit);
341 
342 MODULE_ALIAS("platform:omap_control_phy");
343 MODULE_AUTHOR("Texas Instruments Inc.");
344 MODULE_DESCRIPTION("OMAP Control Module PHY Driver");
345 MODULE_LICENSE("GPL v2");
346