1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Phy drivers for TI platforms 4# 5config PHY_DA8XX_USB 6 tristate "TI DA8xx USB PHY Driver" 7 depends on ARCH_DAVINCI_DA8XX 8 select GENERIC_PHY 9 select MFD_SYSCON 10 help 11 Enable this to support the USB PHY on DA8xx SoCs. 12 13 This driver controls both the USB 1.1 PHY and the USB 2.0 PHY. 14 15config PHY_DM816X_USB 16 tristate "TI dm816x USB PHY driver" 17 depends on ARCH_OMAP2PLUS 18 depends on USB_SUPPORT 19 select GENERIC_PHY 20 select USB_PHY 21 help 22 Enable this for dm816x USB to work. 23 24config PHY_AM654_SERDES 25 tristate "TI AM654 SERDES support" 26 depends on OF && ARCH_K3 || COMPILE_TEST 27 depends on COMMON_CLK 28 select GENERIC_PHY 29 select MULTIPLEXER 30 select REGMAP_MMIO 31 select MUX_MMIO 32 help 33 This option enables support for TI AM654 SerDes PHY used for 34 PCIe. 35 36config OMAP_CONTROL_PHY 37 tristate "OMAP CONTROL PHY Driver" 38 depends on ARCH_OMAP2PLUS || COMPILE_TEST 39 help 40 Enable this to add support for the PHY part present in the control 41 module. This driver has API to power on the USB2 PHY and to write to 42 the mailbox. The mailbox is present only in omap4 and the register to 43 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an 44 additional register to power on USB3 PHY/SATA PHY/PCIE PHY 45 (PIPE3 PHY). 46 47config OMAP_USB2 48 tristate "OMAP USB2 PHY Driver" 49 depends on ARCH_OMAP2PLUS || ARCH_K3 50 depends on USB_SUPPORT 51 select GENERIC_PHY 52 select USB_PHY 53 select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS || COMPILE_TEST 54 help 55 Enable this to support the transceiver that is part of SOC. This 56 driver takes care of all the PHY functionality apart from comparator. 57 The USB OTG controller communicates with the comparator using this 58 driver. 59 60config TI_PIPE3 61 tristate "TI PIPE3 PHY Driver" 62 depends on ARCH_OMAP2PLUS || COMPILE_TEST 63 select GENERIC_PHY 64 select OMAP_CONTROL_PHY 65 help 66 Enable this to support the PIPE3 PHY that is part of TI SOCs. This 67 driver takes care of all the PHY functionality apart from comparator. 68 This driver interacts with the "OMAP Control PHY Driver" to power 69 on/off the PHY. 70 71config PHY_TUSB1210 72 tristate "TI TUSB1210 ULPI PHY module" 73 depends on USB_ULPI_BUS 74 select GENERIC_PHY 75 help 76 Support for TI TUSB1210 USB ULPI PHY. 77 78config TWL4030_USB 79 tristate "TWL4030 USB Transceiver Driver" 80 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS 81 depends on USB_SUPPORT 82 depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y' 83 select GENERIC_PHY 84 select USB_PHY 85 help 86 Enable this to support the USB OTG transceiver on TWL4030 87 family chips (including the TWL5030 and TPS659x0 devices). 88 This transceiver supports high and full speed devices plus, 89 in host mode, low speed. 90 91config PHY_TI_GMII_SEL 92 tristate 93 default y if TI_CPSW=y || TI_CPSW_SWITCHDEV=y 94 depends on TI_CPSW || TI_CPSW_SWITCHDEV || COMPILE_TEST 95 select GENERIC_PHY 96 select REGMAP 97 default m 98 help 99 This driver supports configuring of the TI CPSW Port mode depending on 100 the Ethernet PHY connected to the CPSW Port. 101