1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * STMicroelectronics STM32 USB PHY Controller driver 4 * 5 * Copyright (C) 2018 STMicroelectronics 6 * Author(s): Amelie Delaunay <amelie.delaunay@st.com>. 7 */ 8 #include <linux/bitfield.h> 9 #include <linux/clk.h> 10 #include <linux/clk-provider.h> 11 #include <linux/delay.h> 12 #include <linux/iopoll.h> 13 #include <linux/kernel.h> 14 #include <linux/module.h> 15 #include <linux/of_platform.h> 16 #include <linux/phy/phy.h> 17 #include <linux/reset.h> 18 #include <linux/units.h> 19 20 #define STM32_USBPHYC_PLL 0x0 21 #define STM32_USBPHYC_MISC 0x8 22 #define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100)) 23 #define STM32_USBPHYC_TUNE(X) (0x10C + ((X) * 0x100)) 24 #define STM32_USBPHYC_VERSION 0x3F4 25 26 /* STM32_USBPHYC_PLL bit fields */ 27 #define PLLNDIV GENMASK(6, 0) 28 #define PLLFRACIN GENMASK(25, 10) 29 #define PLLEN BIT(26) 30 #define PLLSTRB BIT(27) 31 #define PLLSTRBYP BIT(28) 32 #define PLLFRACCTL BIT(29) 33 #define PLLDITHEN0 BIT(30) 34 #define PLLDITHEN1 BIT(31) 35 36 /* STM32_USBPHYC_MISC bit fields */ 37 #define SWITHOST BIT(0) 38 39 /* STM32_USBPHYC_MONITOR bit fields */ 40 #define STM32_USBPHYC_MON_OUT GENMASK(3, 0) 41 #define STM32_USBPHYC_MON_SEL GENMASK(8, 4) 42 #define STM32_USBPHYC_MON_SEL_LOCKP 0x1F 43 #define STM32_USBPHYC_MON_OUT_LOCKP BIT(3) 44 45 /* STM32_USBPHYC_TUNE bit fields */ 46 #define INCURREN BIT(0) 47 #define INCURRINT BIT(1) 48 #define LFSCAPEN BIT(2) 49 #define HSDRVSLEW BIT(3) 50 #define HSDRVDCCUR BIT(4) 51 #define HSDRVDCLEV BIT(5) 52 #define HSDRVCURINCR BIT(6) 53 #define FSDRVRFADJ BIT(7) 54 #define HSDRVRFRED BIT(8) 55 #define HSDRVCHKITRM GENMASK(12, 9) 56 #define HSDRVCHKZTRM GENMASK(14, 13) 57 #define OTPCOMP GENMASK(19, 15) 58 #define SQLCHCTL GENMASK(21, 20) 59 #define HDRXGNEQEN BIT(22) 60 #define HSRXOFF GENMASK(24, 23) 61 #define HSFALLPREEM BIT(25) 62 #define SHTCCTCTLPROT BIT(26) 63 #define STAGSEL BIT(27) 64 65 enum boosting_vals { 66 BOOST_1000_UA = 1000, 67 BOOST_2000_UA = 2000, 68 }; 69 70 enum dc_level_vals { 71 DC_NOMINAL, 72 DC_PLUS_5_TO_7_MV, 73 DC_PLUS_10_TO_14_MV, 74 DC_MINUS_5_TO_7_MV, 75 DC_MAX, 76 }; 77 78 enum current_trim { 79 CUR_NOMINAL, 80 CUR_PLUS_1_56_PCT, 81 CUR_PLUS_3_12_PCT, 82 CUR_PLUS_4_68_PCT, 83 CUR_PLUS_6_24_PCT, 84 CUR_PLUS_7_8_PCT, 85 CUR_PLUS_9_36_PCT, 86 CUR_PLUS_10_92_PCT, 87 CUR_PLUS_12_48_PCT, 88 CUR_PLUS_14_04_PCT, 89 CUR_PLUS_15_6_PCT, 90 CUR_PLUS_17_16_PCT, 91 CUR_PLUS_19_01_PCT, 92 CUR_PLUS_20_58_PCT, 93 CUR_PLUS_22_16_PCT, 94 CUR_PLUS_23_73_PCT, 95 CUR_MAX, 96 }; 97 98 enum impedance_trim { 99 IMP_NOMINAL, 100 IMP_MINUS_2_OHMS, 101 IMP_MINUS_4_OMHS, 102 IMP_MINUS_6_OHMS, 103 IMP_MAX, 104 }; 105 106 enum squelch_level { 107 SQLCH_NOMINAL, 108 SQLCH_PLUS_7_MV, 109 SQLCH_MINUS_5_MV, 110 SQLCH_PLUS_14_MV, 111 SQLCH_MAX, 112 }; 113 114 enum rx_offset { 115 NO_RX_OFFSET, 116 RX_OFFSET_PLUS_5_MV, 117 RX_OFFSET_PLUS_10_MV, 118 RX_OFFSET_MINUS_5_MV, 119 RX_OFFSET_MAX, 120 }; 121 122 /* STM32_USBPHYC_VERSION bit fields */ 123 #define MINREV GENMASK(3, 0) 124 #define MAJREV GENMASK(7, 4) 125 126 #define PLL_FVCO_MHZ 2880 127 #define PLL_INFF_MIN_RATE_HZ 19200000 128 #define PLL_INFF_MAX_RATE_HZ 38400000 129 130 struct pll_params { 131 u8 ndiv; 132 u16 frac; 133 }; 134 135 struct stm32_usbphyc_phy { 136 struct phy *phy; 137 struct stm32_usbphyc *usbphyc; 138 struct regulator *vbus; 139 u32 index; 140 bool active; 141 u32 tune; 142 }; 143 144 struct stm32_usbphyc { 145 struct device *dev; 146 void __iomem *base; 147 struct clk *clk; 148 struct reset_control *rst; 149 struct stm32_usbphyc_phy **phys; 150 int nphys; 151 struct regulator *vdda1v1; 152 struct regulator *vdda1v8; 153 atomic_t n_pll_cons; 154 struct clk_hw clk48_hw; 155 int switch_setup; 156 }; 157 158 static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits) 159 { 160 writel_relaxed(readl_relaxed(reg) | bits, reg); 161 } 162 163 static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) 164 { 165 writel_relaxed(readl_relaxed(reg) & ~bits, reg); 166 } 167 168 static int stm32_usbphyc_regulators_enable(struct stm32_usbphyc *usbphyc) 169 { 170 int ret; 171 172 ret = regulator_enable(usbphyc->vdda1v1); 173 if (ret) 174 return ret; 175 176 ret = regulator_enable(usbphyc->vdda1v8); 177 if (ret) 178 goto vdda1v1_disable; 179 180 return 0; 181 182 vdda1v1_disable: 183 regulator_disable(usbphyc->vdda1v1); 184 185 return ret; 186 } 187 188 static int stm32_usbphyc_regulators_disable(struct stm32_usbphyc *usbphyc) 189 { 190 int ret; 191 192 ret = regulator_disable(usbphyc->vdda1v8); 193 if (ret) 194 return ret; 195 196 ret = regulator_disable(usbphyc->vdda1v1); 197 if (ret) 198 return ret; 199 200 return 0; 201 } 202 203 static void stm32_usbphyc_get_pll_params(u32 clk_rate, 204 struct pll_params *pll_params) 205 { 206 unsigned long long fvco, ndiv, frac; 207 208 /* _ 209 * | FVCO = INFF*2*(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1 210 * | FVCO = 2880MHz 211 * < 212 * | NDIV = integer part of input bits to set the LDF 213 * |_FRACT = fractional part of input bits to set the LDF 214 * => PLLNDIV = integer part of (FVCO / (INFF*2)) 215 * => PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16 216 * <=> PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16 217 */ 218 fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ; 219 220 ndiv = fvco; 221 do_div(ndiv, (clk_rate * 2)); 222 pll_params->ndiv = (u8)ndiv; 223 224 frac = fvco * (1 << 16); 225 do_div(frac, (clk_rate * 2)); 226 frac = frac - (ndiv * (1 << 16)); 227 pll_params->frac = (u16)frac; 228 } 229 230 static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) 231 { 232 struct pll_params pll_params; 233 u32 clk_rate = clk_get_rate(usbphyc->clk); 234 u32 ndiv, frac; 235 u32 usbphyc_pll; 236 237 if ((clk_rate < PLL_INFF_MIN_RATE_HZ) || 238 (clk_rate > PLL_INFF_MAX_RATE_HZ)) { 239 dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n", 240 clk_rate); 241 return -EINVAL; 242 } 243 244 stm32_usbphyc_get_pll_params(clk_rate, &pll_params); 245 ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv); 246 frac = FIELD_PREP(PLLFRACIN, pll_params.frac); 247 248 usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP | ndiv; 249 250 if (pll_params.frac) 251 usbphyc_pll |= PLLFRACCTL | frac; 252 253 writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL); 254 255 dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n", 256 clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll), 257 FIELD_GET(PLLFRACIN, usbphyc_pll)); 258 259 return 0; 260 } 261 262 static int __stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) 263 { 264 void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; 265 u32 pllen; 266 267 stm32_usbphyc_clr_bits(pll_reg, PLLEN); 268 269 /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ 270 if (readl_relaxed_poll_timeout(pll_reg, pllen, !(pllen & PLLEN), 5, 50)) 271 dev_err(usbphyc->dev, "PLL not reset\n"); 272 273 return stm32_usbphyc_regulators_disable(usbphyc); 274 } 275 276 static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) 277 { 278 /* Check if a phy port is still active or clk48 in use */ 279 if (atomic_dec_return(&usbphyc->n_pll_cons) > 0) 280 return 0; 281 282 return __stm32_usbphyc_pll_disable(usbphyc); 283 } 284 285 static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) 286 { 287 void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; 288 bool pllen = readl_relaxed(pll_reg) & PLLEN; 289 int ret; 290 291 /* 292 * Check if a phy port or clk48 prepare has configured the pll 293 * and ensure the PLL is enabled 294 */ 295 if (atomic_inc_return(&usbphyc->n_pll_cons) > 1 && pllen) 296 return 0; 297 298 if (pllen) { 299 /* 300 * PLL shouldn't be enabled without known consumer, 301 * disable it and reinit n_pll_cons 302 */ 303 dev_warn(usbphyc->dev, "PLL enabled without known consumers\n"); 304 305 ret = __stm32_usbphyc_pll_disable(usbphyc); 306 if (ret) 307 return ret; 308 } 309 310 ret = stm32_usbphyc_regulators_enable(usbphyc); 311 if (ret) 312 goto dec_n_pll_cons; 313 314 ret = stm32_usbphyc_pll_init(usbphyc); 315 if (ret) 316 goto reg_disable; 317 318 stm32_usbphyc_set_bits(pll_reg, PLLEN); 319 320 return 0; 321 322 reg_disable: 323 stm32_usbphyc_regulators_disable(usbphyc); 324 325 dec_n_pll_cons: 326 atomic_dec(&usbphyc->n_pll_cons); 327 328 return ret; 329 } 330 331 static int stm32_usbphyc_phy_init(struct phy *phy) 332 { 333 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 334 struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; 335 u32 reg_mon = STM32_USBPHYC_MONITOR(usbphyc_phy->index); 336 u32 monsel = FIELD_PREP(STM32_USBPHYC_MON_SEL, 337 STM32_USBPHYC_MON_SEL_LOCKP); 338 u32 monout; 339 int ret; 340 341 ret = stm32_usbphyc_pll_enable(usbphyc); 342 if (ret) 343 return ret; 344 345 /* Check that PLL Lock input to PHY is High */ 346 writel_relaxed(monsel, usbphyc->base + reg_mon); 347 ret = readl_relaxed_poll_timeout(usbphyc->base + reg_mon, monout, 348 (monout & STM32_USBPHYC_MON_OUT_LOCKP), 349 100, 1000); 350 if (ret) { 351 dev_err(usbphyc->dev, "PLL Lock input to PHY is Low (val=%x)\n", 352 (u32)(monout & STM32_USBPHYC_MON_OUT)); 353 goto pll_disable; 354 } 355 356 usbphyc_phy->active = true; 357 358 return 0; 359 360 pll_disable: 361 return stm32_usbphyc_pll_disable(usbphyc); 362 } 363 364 static int stm32_usbphyc_phy_exit(struct phy *phy) 365 { 366 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 367 struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; 368 369 usbphyc_phy->active = false; 370 371 return stm32_usbphyc_pll_disable(usbphyc); 372 } 373 374 static int stm32_usbphyc_phy_power_on(struct phy *phy) 375 { 376 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 377 378 if (usbphyc_phy->vbus) 379 return regulator_enable(usbphyc_phy->vbus); 380 381 return 0; 382 } 383 384 static int stm32_usbphyc_phy_power_off(struct phy *phy) 385 { 386 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 387 388 if (usbphyc_phy->vbus) 389 return regulator_disable(usbphyc_phy->vbus); 390 391 return 0; 392 } 393 394 static const struct phy_ops stm32_usbphyc_phy_ops = { 395 .init = stm32_usbphyc_phy_init, 396 .exit = stm32_usbphyc_phy_exit, 397 .power_on = stm32_usbphyc_phy_power_on, 398 .power_off = stm32_usbphyc_phy_power_off, 399 .owner = THIS_MODULE, 400 }; 401 402 static int stm32_usbphyc_clk48_prepare(struct clk_hw *hw) 403 { 404 struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); 405 406 return stm32_usbphyc_pll_enable(usbphyc); 407 } 408 409 static void stm32_usbphyc_clk48_unprepare(struct clk_hw *hw) 410 { 411 struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); 412 413 stm32_usbphyc_pll_disable(usbphyc); 414 } 415 416 static unsigned long stm32_usbphyc_clk48_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) 417 { 418 return 48000000; 419 } 420 421 static const struct clk_ops usbphyc_clk48_ops = { 422 .prepare = stm32_usbphyc_clk48_prepare, 423 .unprepare = stm32_usbphyc_clk48_unprepare, 424 .recalc_rate = stm32_usbphyc_clk48_recalc_rate, 425 }; 426 427 static void stm32_usbphyc_clk48_unregister(void *data) 428 { 429 struct stm32_usbphyc *usbphyc = data; 430 431 of_clk_del_provider(usbphyc->dev->of_node); 432 clk_hw_unregister(&usbphyc->clk48_hw); 433 } 434 435 static int stm32_usbphyc_clk48_register(struct stm32_usbphyc *usbphyc) 436 { 437 struct device_node *node = usbphyc->dev->of_node; 438 struct clk_init_data init = { }; 439 int ret = 0; 440 441 init.name = "ck_usbo_48m"; 442 init.ops = &usbphyc_clk48_ops; 443 444 usbphyc->clk48_hw.init = &init; 445 446 ret = clk_hw_register(usbphyc->dev, &usbphyc->clk48_hw); 447 if (ret) 448 return ret; 449 450 ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &usbphyc->clk48_hw); 451 if (ret) 452 clk_hw_unregister(&usbphyc->clk48_hw); 453 454 return ret; 455 } 456 457 static void stm32_usbphyc_phy_tuning(struct stm32_usbphyc *usbphyc, 458 struct device_node *np, u32 index) 459 { 460 struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys[index]; 461 u32 reg = STM32_USBPHYC_TUNE(index); 462 u32 otpcomp, val; 463 int ret; 464 465 /* Backup OTP compensation code */ 466 otpcomp = FIELD_GET(OTPCOMP, readl_relaxed(usbphyc->base + reg)); 467 468 ret = of_property_read_u32(np, "st,current-boost-microamp", &val); 469 if (ret != -EINVAL) { 470 if (!ret && (val == BOOST_1000_UA || val == BOOST_2000_UA)) { 471 val = (val == BOOST_2000_UA) ? 1 : 0; 472 usbphyc_phy->tune |= INCURREN | FIELD_PREP(INCURRINT, val); 473 } else { 474 dev_warn(usbphyc->dev, "phy%d: invalid st,current-boost-microamp\n", index); 475 } 476 } 477 478 if (!of_property_read_bool(np, "st,no-lsfs-fb-cap")) 479 usbphyc_phy->tune |= LFSCAPEN; 480 481 if (of_property_read_bool(np, "st,slow-hs-slew-rate")) 482 usbphyc_phy->tune |= HSDRVSLEW; 483 484 ret = of_property_read_u32(np, "st,tune-hs-dc-level", &val); 485 if (ret != -EINVAL) { 486 if (!ret && val < DC_MAX) { 487 if (val == DC_MINUS_5_TO_7_MV) {/* Decreases HS driver DC level */ 488 usbphyc_phy->tune |= HSDRVDCCUR; 489 } else if (val > 0) { /* Increases HS driver DC level */ 490 val = (val == DC_PLUS_10_TO_14_MV) ? 1 : 0; 491 usbphyc_phy->tune |= HSDRVCURINCR | FIELD_PREP(HSDRVDCLEV, val); 492 } 493 } else { 494 dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-dc-level\n", index); 495 } 496 } 497 498 if (of_property_read_bool(np, "st,enable-fs-rftime-tuning")) 499 usbphyc_phy->tune |= FSDRVRFADJ; 500 501 if (of_property_read_bool(np, "st,enable-hs-rftime-reduction")) 502 usbphyc_phy->tune |= HSDRVRFRED; 503 504 ret = of_property_read_u32(np, "st,trim-hs-current", &val); 505 if (ret != -EINVAL) { 506 if (!ret && val < CUR_MAX) 507 usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKITRM, val); 508 else 509 dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-current\n", index); 510 } 511 512 ret = of_property_read_u32(np, "st,trim-hs-impedance", &val); 513 if (ret != -EINVAL) { 514 if (!ret && val < IMP_MAX) 515 usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKZTRM, val); 516 else 517 dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-impedance\n", index); 518 } 519 520 ret = of_property_read_u32(np, "st,tune-squelch-level", &val); 521 if (ret != -EINVAL) { 522 if (!ret && val < SQLCH_MAX) 523 usbphyc_phy->tune |= FIELD_PREP(SQLCHCTL, val); 524 else 525 dev_warn(usbphyc->dev, "phy%d: invalid st,tune-squelch\n", index); 526 } 527 528 if (of_property_read_bool(np, "st,enable-hs-rx-gain-eq")) 529 usbphyc_phy->tune |= HDRXGNEQEN; 530 531 ret = of_property_read_u32(np, "st,tune-hs-rx-offset", &val); 532 if (ret != -EINVAL) { 533 if (!ret && val < RX_OFFSET_MAX) 534 usbphyc_phy->tune |= FIELD_PREP(HSRXOFF, val); 535 else 536 dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-rx-offset\n", index); 537 } 538 539 if (of_property_read_bool(np, "st,no-hs-ftime-ctrl")) 540 usbphyc_phy->tune |= HSFALLPREEM; 541 542 if (!of_property_read_bool(np, "st,no-lsfs-sc")) 543 usbphyc_phy->tune |= SHTCCTCTLPROT; 544 545 if (of_property_read_bool(np, "st,enable-hs-tx-staggering")) 546 usbphyc_phy->tune |= STAGSEL; 547 548 /* Restore OTP compensation code */ 549 usbphyc_phy->tune |= FIELD_PREP(OTPCOMP, otpcomp); 550 551 /* 552 * By default, if no st,xxx tuning property is used, usbphyc_phy->tune is equal to 553 * STM32_USBPHYC_TUNE reset value (LFSCAPEN | SHTCCTCTLPROT | OTPCOMP). 554 */ 555 writel_relaxed(usbphyc_phy->tune, usbphyc->base + reg); 556 } 557 558 static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, 559 u32 utmi_switch) 560 { 561 if (!utmi_switch) 562 stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC, 563 SWITHOST); 564 else 565 stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC, 566 SWITHOST); 567 usbphyc->switch_setup = utmi_switch; 568 } 569 570 static struct phy *stm32_usbphyc_of_xlate(struct device *dev, 571 struct of_phandle_args *args) 572 { 573 struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); 574 struct stm32_usbphyc_phy *usbphyc_phy = NULL; 575 struct device_node *phynode = args->np; 576 int port = 0; 577 578 for (port = 0; port < usbphyc->nphys; port++) { 579 if (phynode == usbphyc->phys[port]->phy->dev.of_node) { 580 usbphyc_phy = usbphyc->phys[port]; 581 break; 582 } 583 } 584 if (!usbphyc_phy) { 585 dev_err(dev, "failed to find phy\n"); 586 return ERR_PTR(-EINVAL); 587 } 588 589 if (((usbphyc_phy->index == 0) && (args->args_count != 0)) || 590 ((usbphyc_phy->index == 1) && (args->args_count != 1))) { 591 dev_err(dev, "invalid number of cells for phy port%d\n", 592 usbphyc_phy->index); 593 return ERR_PTR(-EINVAL); 594 } 595 596 /* Configure the UTMI switch for PHY port#2 */ 597 if (usbphyc_phy->index == 1) { 598 if (usbphyc->switch_setup < 0) { 599 stm32_usbphyc_switch_setup(usbphyc, args->args[0]); 600 } else { 601 if (args->args[0] != usbphyc->switch_setup) { 602 dev_err(dev, "phy port1 already used\n"); 603 return ERR_PTR(-EBUSY); 604 } 605 } 606 } 607 608 return usbphyc_phy->phy; 609 } 610 611 static int stm32_usbphyc_probe(struct platform_device *pdev) 612 { 613 struct stm32_usbphyc *usbphyc; 614 struct device *dev = &pdev->dev; 615 struct device_node *child, *np = dev->of_node; 616 struct phy_provider *phy_provider; 617 u32 pllen, version; 618 int ret, port = 0; 619 620 usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL); 621 if (!usbphyc) 622 return -ENOMEM; 623 usbphyc->dev = dev; 624 dev_set_drvdata(dev, usbphyc); 625 626 usbphyc->base = devm_platform_ioremap_resource(pdev, 0); 627 if (IS_ERR(usbphyc->base)) 628 return PTR_ERR(usbphyc->base); 629 630 usbphyc->clk = devm_clk_get(dev, NULL); 631 if (IS_ERR(usbphyc->clk)) 632 return dev_err_probe(dev, PTR_ERR(usbphyc->clk), "clk get_failed\n"); 633 634 ret = clk_prepare_enable(usbphyc->clk); 635 if (ret) { 636 dev_err(dev, "clk enable failed: %d\n", ret); 637 return ret; 638 } 639 640 usbphyc->rst = devm_reset_control_get(dev, NULL); 641 if (!IS_ERR(usbphyc->rst)) { 642 reset_control_assert(usbphyc->rst); 643 udelay(2); 644 reset_control_deassert(usbphyc->rst); 645 } else { 646 ret = PTR_ERR(usbphyc->rst); 647 if (ret == -EPROBE_DEFER) 648 goto clk_disable; 649 650 stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_PLL, PLLEN); 651 } 652 653 /* 654 * Wait for minimum width of powerdown pulse (ENABLE = Low): 655 * we have to ensure the PLL is disabled before phys initialization. 656 */ 657 if (readl_relaxed_poll_timeout(usbphyc->base + STM32_USBPHYC_PLL, 658 pllen, !(pllen & PLLEN), 5, 50)) { 659 dev_warn(usbphyc->dev, "PLL not reset\n"); 660 ret = -EPROBE_DEFER; 661 goto clk_disable; 662 } 663 664 usbphyc->switch_setup = -EINVAL; 665 usbphyc->nphys = of_get_child_count(np); 666 usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys, 667 sizeof(*usbphyc->phys), GFP_KERNEL); 668 if (!usbphyc->phys) { 669 ret = -ENOMEM; 670 goto clk_disable; 671 } 672 673 usbphyc->vdda1v1 = devm_regulator_get(dev, "vdda1v1"); 674 if (IS_ERR(usbphyc->vdda1v1)) { 675 ret = PTR_ERR(usbphyc->vdda1v1); 676 if (ret != -EPROBE_DEFER) 677 dev_err(dev, "failed to get vdda1v1 supply: %d\n", ret); 678 goto clk_disable; 679 } 680 681 usbphyc->vdda1v8 = devm_regulator_get(dev, "vdda1v8"); 682 if (IS_ERR(usbphyc->vdda1v8)) { 683 ret = PTR_ERR(usbphyc->vdda1v8); 684 if (ret != -EPROBE_DEFER) 685 dev_err(dev, "failed to get vdda1v8 supply: %d\n", ret); 686 goto clk_disable; 687 } 688 689 for_each_child_of_node(np, child) { 690 struct stm32_usbphyc_phy *usbphyc_phy; 691 struct phy *phy; 692 u32 index; 693 694 phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops); 695 if (IS_ERR(phy)) { 696 ret = PTR_ERR(phy); 697 if (ret != -EPROBE_DEFER) 698 dev_err(dev, "failed to create phy%d: %d\n", 699 port, ret); 700 goto put_child; 701 } 702 703 usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy), 704 GFP_KERNEL); 705 if (!usbphyc_phy) { 706 ret = -ENOMEM; 707 goto put_child; 708 } 709 710 ret = of_property_read_u32(child, "reg", &index); 711 if (ret || index > usbphyc->nphys) { 712 dev_err(&phy->dev, "invalid reg property: %d\n", ret); 713 goto put_child; 714 } 715 716 usbphyc->phys[port] = usbphyc_phy; 717 phy_set_bus_width(phy, 8); 718 phy_set_drvdata(phy, usbphyc_phy); 719 720 usbphyc->phys[port]->phy = phy; 721 usbphyc->phys[port]->usbphyc = usbphyc; 722 usbphyc->phys[port]->index = index; 723 usbphyc->phys[port]->active = false; 724 725 usbphyc->phys[port]->vbus = devm_regulator_get_optional(&phy->dev, "vbus"); 726 if (IS_ERR(usbphyc->phys[port]->vbus)) { 727 ret = PTR_ERR(usbphyc->phys[port]->vbus); 728 if (ret == -EPROBE_DEFER) 729 goto put_child; 730 usbphyc->phys[port]->vbus = NULL; 731 } 732 733 /* Configure phy tuning */ 734 stm32_usbphyc_phy_tuning(usbphyc, child, index); 735 736 port++; 737 } 738 739 phy_provider = devm_of_phy_provider_register(dev, 740 stm32_usbphyc_of_xlate); 741 if (IS_ERR(phy_provider)) { 742 ret = PTR_ERR(phy_provider); 743 dev_err(dev, "failed to register phy provider: %d\n", ret); 744 goto clk_disable; 745 } 746 747 ret = stm32_usbphyc_clk48_register(usbphyc); 748 if (ret) { 749 dev_err(dev, "failed to register ck_usbo_48m clock: %d\n", ret); 750 goto clk_disable; 751 } 752 753 version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); 754 dev_info(dev, "registered rev:%lu.%lu\n", 755 FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); 756 757 return 0; 758 759 put_child: 760 of_node_put(child); 761 clk_disable: 762 clk_disable_unprepare(usbphyc->clk); 763 764 return ret; 765 } 766 767 static int stm32_usbphyc_remove(struct platform_device *pdev) 768 { 769 struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev); 770 int port; 771 772 /* Ensure PHYs are not active, to allow PLL disabling */ 773 for (port = 0; port < usbphyc->nphys; port++) 774 if (usbphyc->phys[port]->active) 775 stm32_usbphyc_phy_exit(usbphyc->phys[port]->phy); 776 777 stm32_usbphyc_clk48_unregister(usbphyc); 778 779 clk_disable_unprepare(usbphyc->clk); 780 781 return 0; 782 } 783 784 static int __maybe_unused stm32_usbphyc_resume(struct device *dev) 785 { 786 struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); 787 struct stm32_usbphyc_phy *usbphyc_phy; 788 int port; 789 790 if (usbphyc->switch_setup >= 0) 791 stm32_usbphyc_switch_setup(usbphyc, usbphyc->switch_setup); 792 793 for (port = 0; port < usbphyc->nphys; port++) { 794 usbphyc_phy = usbphyc->phys[port]; 795 writel_relaxed(usbphyc_phy->tune, usbphyc->base + STM32_USBPHYC_TUNE(port)); 796 } 797 798 return 0; 799 } 800 801 static SIMPLE_DEV_PM_OPS(stm32_usbphyc_pm_ops, NULL, stm32_usbphyc_resume); 802 803 static const struct of_device_id stm32_usbphyc_of_match[] = { 804 { .compatible = "st,stm32mp1-usbphyc", }, 805 { }, 806 }; 807 MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match); 808 809 static struct platform_driver stm32_usbphyc_driver = { 810 .probe = stm32_usbphyc_probe, 811 .remove = stm32_usbphyc_remove, 812 .driver = { 813 .of_match_table = stm32_usbphyc_of_match, 814 .name = "stm32-usbphyc", 815 .pm = &stm32_usbphyc_pm_ops, 816 } 817 }; 818 module_platform_driver(stm32_usbphyc_driver); 819 820 MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver"); 821 MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); 822 MODULE_LICENSE("GPL v2"); 823