1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * STMicroelectronics STM32 USB PHY Controller driver 4 * 5 * Copyright (C) 2018 STMicroelectronics 6 * Author(s): Amelie Delaunay <amelie.delaunay@st.com>. 7 */ 8 #include <linux/bitfield.h> 9 #include <linux/clk.h> 10 #include <linux/clk-provider.h> 11 #include <linux/delay.h> 12 #include <linux/iopoll.h> 13 #include <linux/kernel.h> 14 #include <linux/module.h> 15 #include <linux/of.h> 16 #include <linux/phy/phy.h> 17 #include <linux/platform_device.h> 18 #include <linux/reset.h> 19 #include <linux/units.h> 20 21 #define STM32_USBPHYC_PLL 0x0 22 #define STM32_USBPHYC_MISC 0x8 23 #define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100)) 24 #define STM32_USBPHYC_TUNE(X) (0x10C + ((X) * 0x100)) 25 #define STM32_USBPHYC_VERSION 0x3F4 26 27 /* STM32_USBPHYC_PLL bit fields */ 28 #define PLLNDIV GENMASK(6, 0) 29 #define PLLFRACIN GENMASK(25, 10) 30 #define PLLEN BIT(26) 31 #define PLLSTRB BIT(27) 32 #define PLLSTRBYP BIT(28) 33 #define PLLFRACCTL BIT(29) 34 #define PLLDITHEN0 BIT(30) 35 #define PLLDITHEN1 BIT(31) 36 37 /* STM32_USBPHYC_MISC bit fields */ 38 #define SWITHOST BIT(0) 39 40 /* STM32_USBPHYC_MONITOR bit fields */ 41 #define STM32_USBPHYC_MON_OUT GENMASK(3, 0) 42 #define STM32_USBPHYC_MON_SEL GENMASK(8, 4) 43 #define STM32_USBPHYC_MON_SEL_LOCKP 0x1F 44 #define STM32_USBPHYC_MON_OUT_LOCKP BIT(3) 45 46 /* STM32_USBPHYC_TUNE bit fields */ 47 #define INCURREN BIT(0) 48 #define INCURRINT BIT(1) 49 #define LFSCAPEN BIT(2) 50 #define HSDRVSLEW BIT(3) 51 #define HSDRVDCCUR BIT(4) 52 #define HSDRVDCLEV BIT(5) 53 #define HSDRVCURINCR BIT(6) 54 #define FSDRVRFADJ BIT(7) 55 #define HSDRVRFRED BIT(8) 56 #define HSDRVCHKITRM GENMASK(12, 9) 57 #define HSDRVCHKZTRM GENMASK(14, 13) 58 #define OTPCOMP GENMASK(19, 15) 59 #define SQLCHCTL GENMASK(21, 20) 60 #define HDRXGNEQEN BIT(22) 61 #define HSRXOFF GENMASK(24, 23) 62 #define HSFALLPREEM BIT(25) 63 #define SHTCCTCTLPROT BIT(26) 64 #define STAGSEL BIT(27) 65 66 enum boosting_vals { 67 BOOST_1000_UA = 1000, 68 BOOST_2000_UA = 2000, 69 }; 70 71 enum dc_level_vals { 72 DC_NOMINAL, 73 DC_PLUS_5_TO_7_MV, 74 DC_PLUS_10_TO_14_MV, 75 DC_MINUS_5_TO_7_MV, 76 DC_MAX, 77 }; 78 79 enum current_trim { 80 CUR_NOMINAL, 81 CUR_PLUS_1_56_PCT, 82 CUR_PLUS_3_12_PCT, 83 CUR_PLUS_4_68_PCT, 84 CUR_PLUS_6_24_PCT, 85 CUR_PLUS_7_8_PCT, 86 CUR_PLUS_9_36_PCT, 87 CUR_PLUS_10_92_PCT, 88 CUR_PLUS_12_48_PCT, 89 CUR_PLUS_14_04_PCT, 90 CUR_PLUS_15_6_PCT, 91 CUR_PLUS_17_16_PCT, 92 CUR_PLUS_19_01_PCT, 93 CUR_PLUS_20_58_PCT, 94 CUR_PLUS_22_16_PCT, 95 CUR_PLUS_23_73_PCT, 96 CUR_MAX, 97 }; 98 99 enum impedance_trim { 100 IMP_NOMINAL, 101 IMP_MINUS_2_OHMS, 102 IMP_MINUS_4_OMHS, 103 IMP_MINUS_6_OHMS, 104 IMP_MAX, 105 }; 106 107 enum squelch_level { 108 SQLCH_NOMINAL, 109 SQLCH_PLUS_7_MV, 110 SQLCH_MINUS_5_MV, 111 SQLCH_PLUS_14_MV, 112 SQLCH_MAX, 113 }; 114 115 enum rx_offset { 116 NO_RX_OFFSET, 117 RX_OFFSET_PLUS_5_MV, 118 RX_OFFSET_PLUS_10_MV, 119 RX_OFFSET_MINUS_5_MV, 120 RX_OFFSET_MAX, 121 }; 122 123 /* STM32_USBPHYC_VERSION bit fields */ 124 #define MINREV GENMASK(3, 0) 125 #define MAJREV GENMASK(7, 4) 126 127 #define PLL_FVCO_MHZ 2880 128 #define PLL_INFF_MIN_RATE_HZ 19200000 129 #define PLL_INFF_MAX_RATE_HZ 38400000 130 131 struct pll_params { 132 u8 ndiv; 133 u16 frac; 134 }; 135 136 struct stm32_usbphyc_phy { 137 struct phy *phy; 138 struct stm32_usbphyc *usbphyc; 139 struct regulator *vbus; 140 u32 index; 141 bool active; 142 u32 tune; 143 }; 144 145 struct stm32_usbphyc { 146 struct device *dev; 147 void __iomem *base; 148 struct clk *clk; 149 struct reset_control *rst; 150 struct stm32_usbphyc_phy **phys; 151 int nphys; 152 struct regulator *vdda1v1; 153 struct regulator *vdda1v8; 154 atomic_t n_pll_cons; 155 struct clk_hw clk48_hw; 156 int switch_setup; 157 }; 158 159 static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits) 160 { 161 writel_relaxed(readl_relaxed(reg) | bits, reg); 162 } 163 164 static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) 165 { 166 writel_relaxed(readl_relaxed(reg) & ~bits, reg); 167 } 168 169 static int stm32_usbphyc_regulators_enable(struct stm32_usbphyc *usbphyc) 170 { 171 int ret; 172 173 ret = regulator_enable(usbphyc->vdda1v1); 174 if (ret) 175 return ret; 176 177 ret = regulator_enable(usbphyc->vdda1v8); 178 if (ret) 179 goto vdda1v1_disable; 180 181 return 0; 182 183 vdda1v1_disable: 184 regulator_disable(usbphyc->vdda1v1); 185 186 return ret; 187 } 188 189 static int stm32_usbphyc_regulators_disable(struct stm32_usbphyc *usbphyc) 190 { 191 int ret; 192 193 ret = regulator_disable(usbphyc->vdda1v8); 194 if (ret) 195 return ret; 196 197 ret = regulator_disable(usbphyc->vdda1v1); 198 if (ret) 199 return ret; 200 201 return 0; 202 } 203 204 static void stm32_usbphyc_get_pll_params(u32 clk_rate, 205 struct pll_params *pll_params) 206 { 207 unsigned long long fvco, ndiv, frac; 208 209 /* _ 210 * | FVCO = INFF*2*(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1 211 * | FVCO = 2880MHz 212 * < 213 * | NDIV = integer part of input bits to set the LDF 214 * |_FRACT = fractional part of input bits to set the LDF 215 * => PLLNDIV = integer part of (FVCO / (INFF*2)) 216 * => PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16 217 * <=> PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16 218 */ 219 fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ; 220 221 ndiv = fvco; 222 do_div(ndiv, (clk_rate * 2)); 223 pll_params->ndiv = (u8)ndiv; 224 225 frac = fvco * (1 << 16); 226 do_div(frac, (clk_rate * 2)); 227 frac = frac - (ndiv * (1 << 16)); 228 pll_params->frac = (u16)frac; 229 } 230 231 static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) 232 { 233 struct pll_params pll_params; 234 u32 clk_rate = clk_get_rate(usbphyc->clk); 235 u32 ndiv, frac; 236 u32 usbphyc_pll; 237 238 if ((clk_rate < PLL_INFF_MIN_RATE_HZ) || 239 (clk_rate > PLL_INFF_MAX_RATE_HZ)) { 240 dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n", 241 clk_rate); 242 return -EINVAL; 243 } 244 245 stm32_usbphyc_get_pll_params(clk_rate, &pll_params); 246 ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv); 247 frac = FIELD_PREP(PLLFRACIN, pll_params.frac); 248 249 usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP | ndiv; 250 251 if (pll_params.frac) 252 usbphyc_pll |= PLLFRACCTL | frac; 253 254 writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL); 255 256 dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n", 257 clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll), 258 FIELD_GET(PLLFRACIN, usbphyc_pll)); 259 260 return 0; 261 } 262 263 static int __stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) 264 { 265 void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; 266 u32 pllen; 267 268 stm32_usbphyc_clr_bits(pll_reg, PLLEN); 269 270 /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ 271 if (readl_relaxed_poll_timeout(pll_reg, pllen, !(pllen & PLLEN), 5, 50)) 272 dev_err(usbphyc->dev, "PLL not reset\n"); 273 274 return stm32_usbphyc_regulators_disable(usbphyc); 275 } 276 277 static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) 278 { 279 /* Check if a phy port is still active or clk48 in use */ 280 if (atomic_dec_return(&usbphyc->n_pll_cons) > 0) 281 return 0; 282 283 return __stm32_usbphyc_pll_disable(usbphyc); 284 } 285 286 static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) 287 { 288 void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; 289 bool pllen = readl_relaxed(pll_reg) & PLLEN; 290 int ret; 291 292 /* 293 * Check if a phy port or clk48 prepare has configured the pll 294 * and ensure the PLL is enabled 295 */ 296 if (atomic_inc_return(&usbphyc->n_pll_cons) > 1 && pllen) 297 return 0; 298 299 if (pllen) { 300 /* 301 * PLL shouldn't be enabled without known consumer, 302 * disable it and reinit n_pll_cons 303 */ 304 dev_warn(usbphyc->dev, "PLL enabled without known consumers\n"); 305 306 ret = __stm32_usbphyc_pll_disable(usbphyc); 307 if (ret) 308 goto dec_n_pll_cons; 309 } 310 311 ret = stm32_usbphyc_regulators_enable(usbphyc); 312 if (ret) 313 goto dec_n_pll_cons; 314 315 ret = stm32_usbphyc_pll_init(usbphyc); 316 if (ret) 317 goto reg_disable; 318 319 stm32_usbphyc_set_bits(pll_reg, PLLEN); 320 321 /* Wait for maximum lock time */ 322 usleep_range(200, 300); 323 324 return 0; 325 326 reg_disable: 327 stm32_usbphyc_regulators_disable(usbphyc); 328 329 dec_n_pll_cons: 330 atomic_dec(&usbphyc->n_pll_cons); 331 332 return ret; 333 } 334 335 static int stm32_usbphyc_phy_init(struct phy *phy) 336 { 337 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 338 struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; 339 u32 reg_mon = STM32_USBPHYC_MONITOR(usbphyc_phy->index); 340 u32 monsel = FIELD_PREP(STM32_USBPHYC_MON_SEL, 341 STM32_USBPHYC_MON_SEL_LOCKP); 342 u32 monout; 343 int ret; 344 345 ret = stm32_usbphyc_pll_enable(usbphyc); 346 if (ret) 347 return ret; 348 349 /* Check that PLL Lock input to PHY is High */ 350 writel_relaxed(monsel, usbphyc->base + reg_mon); 351 ret = readl_relaxed_poll_timeout(usbphyc->base + reg_mon, monout, 352 (monout & STM32_USBPHYC_MON_OUT_LOCKP), 353 100, 1000); 354 if (ret) { 355 dev_err(usbphyc->dev, "PLL Lock input to PHY is Low (val=%x)\n", 356 (u32)(monout & STM32_USBPHYC_MON_OUT)); 357 goto pll_disable; 358 } 359 360 usbphyc_phy->active = true; 361 362 return 0; 363 364 pll_disable: 365 stm32_usbphyc_pll_disable(usbphyc); 366 367 return ret; 368 } 369 370 static int stm32_usbphyc_phy_exit(struct phy *phy) 371 { 372 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 373 struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; 374 375 usbphyc_phy->active = false; 376 377 return stm32_usbphyc_pll_disable(usbphyc); 378 } 379 380 static int stm32_usbphyc_phy_power_on(struct phy *phy) 381 { 382 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 383 384 if (usbphyc_phy->vbus) 385 return regulator_enable(usbphyc_phy->vbus); 386 387 return 0; 388 } 389 390 static int stm32_usbphyc_phy_power_off(struct phy *phy) 391 { 392 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 393 394 if (usbphyc_phy->vbus) 395 return regulator_disable(usbphyc_phy->vbus); 396 397 return 0; 398 } 399 400 static const struct phy_ops stm32_usbphyc_phy_ops = { 401 .init = stm32_usbphyc_phy_init, 402 .exit = stm32_usbphyc_phy_exit, 403 .power_on = stm32_usbphyc_phy_power_on, 404 .power_off = stm32_usbphyc_phy_power_off, 405 .owner = THIS_MODULE, 406 }; 407 408 static int stm32_usbphyc_clk48_prepare(struct clk_hw *hw) 409 { 410 struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); 411 412 return stm32_usbphyc_pll_enable(usbphyc); 413 } 414 415 static void stm32_usbphyc_clk48_unprepare(struct clk_hw *hw) 416 { 417 struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); 418 419 stm32_usbphyc_pll_disable(usbphyc); 420 } 421 422 static unsigned long stm32_usbphyc_clk48_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) 423 { 424 return 48000000; 425 } 426 427 static const struct clk_ops usbphyc_clk48_ops = { 428 .prepare = stm32_usbphyc_clk48_prepare, 429 .unprepare = stm32_usbphyc_clk48_unprepare, 430 .recalc_rate = stm32_usbphyc_clk48_recalc_rate, 431 }; 432 433 static void stm32_usbphyc_clk48_unregister(void *data) 434 { 435 struct stm32_usbphyc *usbphyc = data; 436 437 of_clk_del_provider(usbphyc->dev->of_node); 438 clk_hw_unregister(&usbphyc->clk48_hw); 439 } 440 441 static int stm32_usbphyc_clk48_register(struct stm32_usbphyc *usbphyc) 442 { 443 struct device_node *node = usbphyc->dev->of_node; 444 struct clk_init_data init = { }; 445 int ret = 0; 446 447 init.name = "ck_usbo_48m"; 448 init.ops = &usbphyc_clk48_ops; 449 450 usbphyc->clk48_hw.init = &init; 451 452 ret = clk_hw_register(usbphyc->dev, &usbphyc->clk48_hw); 453 if (ret) 454 return ret; 455 456 ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &usbphyc->clk48_hw); 457 if (ret) 458 clk_hw_unregister(&usbphyc->clk48_hw); 459 460 return ret; 461 } 462 463 static void stm32_usbphyc_phy_tuning(struct stm32_usbphyc *usbphyc, 464 struct device_node *np, u32 index) 465 { 466 struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys[index]; 467 u32 reg = STM32_USBPHYC_TUNE(index); 468 u32 otpcomp, val; 469 int ret; 470 471 /* Backup OTP compensation code */ 472 otpcomp = FIELD_GET(OTPCOMP, readl_relaxed(usbphyc->base + reg)); 473 474 ret = of_property_read_u32(np, "st,current-boost-microamp", &val); 475 if (ret != -EINVAL) { 476 if (!ret && (val == BOOST_1000_UA || val == BOOST_2000_UA)) { 477 val = (val == BOOST_2000_UA) ? 1 : 0; 478 usbphyc_phy->tune |= INCURREN | FIELD_PREP(INCURRINT, val); 479 } else { 480 dev_warn(usbphyc->dev, "phy%d: invalid st,current-boost-microamp\n", index); 481 } 482 } 483 484 if (!of_property_read_bool(np, "st,no-lsfs-fb-cap")) 485 usbphyc_phy->tune |= LFSCAPEN; 486 487 if (of_property_read_bool(np, "st,decrease-hs-slew-rate")) 488 usbphyc_phy->tune |= HSDRVSLEW; 489 490 ret = of_property_read_u32(np, "st,tune-hs-dc-level", &val); 491 if (ret != -EINVAL) { 492 if (!ret && val < DC_MAX) { 493 if (val == DC_MINUS_5_TO_7_MV) {/* Decreases HS driver DC level */ 494 usbphyc_phy->tune |= HSDRVDCCUR; 495 } else if (val > 0) { /* Increases HS driver DC level */ 496 val = (val == DC_PLUS_10_TO_14_MV) ? 1 : 0; 497 usbphyc_phy->tune |= HSDRVCURINCR | FIELD_PREP(HSDRVDCLEV, val); 498 } 499 } else { 500 dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-dc-level\n", index); 501 } 502 } 503 504 if (of_property_read_bool(np, "st,enable-fs-rftime-tuning")) 505 usbphyc_phy->tune |= FSDRVRFADJ; 506 507 if (of_property_read_bool(np, "st,enable-hs-rftime-reduction")) 508 usbphyc_phy->tune |= HSDRVRFRED; 509 510 ret = of_property_read_u32(np, "st,trim-hs-current", &val); 511 if (ret != -EINVAL) { 512 if (!ret && val < CUR_MAX) 513 usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKITRM, val); 514 else 515 dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-current\n", index); 516 } 517 518 ret = of_property_read_u32(np, "st,trim-hs-impedance", &val); 519 if (ret != -EINVAL) { 520 if (!ret && val < IMP_MAX) 521 usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKZTRM, val); 522 else 523 dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-impedance\n", index); 524 } 525 526 ret = of_property_read_u32(np, "st,tune-squelch-level", &val); 527 if (ret != -EINVAL) { 528 if (!ret && val < SQLCH_MAX) 529 usbphyc_phy->tune |= FIELD_PREP(SQLCHCTL, val); 530 else 531 dev_warn(usbphyc->dev, "phy%d: invalid st,tune-squelch\n", index); 532 } 533 534 if (of_property_read_bool(np, "st,enable-hs-rx-gain-eq")) 535 usbphyc_phy->tune |= HDRXGNEQEN; 536 537 ret = of_property_read_u32(np, "st,tune-hs-rx-offset", &val); 538 if (ret != -EINVAL) { 539 if (!ret && val < RX_OFFSET_MAX) 540 usbphyc_phy->tune |= FIELD_PREP(HSRXOFF, val); 541 else 542 dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-rx-offset\n", index); 543 } 544 545 if (of_property_read_bool(np, "st,no-hs-ftime-ctrl")) 546 usbphyc_phy->tune |= HSFALLPREEM; 547 548 if (!of_property_read_bool(np, "st,no-lsfs-sc")) 549 usbphyc_phy->tune |= SHTCCTCTLPROT; 550 551 if (of_property_read_bool(np, "st,enable-hs-tx-staggering")) 552 usbphyc_phy->tune |= STAGSEL; 553 554 /* Restore OTP compensation code */ 555 usbphyc_phy->tune |= FIELD_PREP(OTPCOMP, otpcomp); 556 557 /* 558 * By default, if no st,xxx tuning property is used, usbphyc_phy->tune is equal to 559 * STM32_USBPHYC_TUNE reset value (LFSCAPEN | SHTCCTCTLPROT | OTPCOMP). 560 */ 561 writel_relaxed(usbphyc_phy->tune, usbphyc->base + reg); 562 } 563 564 static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, 565 u32 utmi_switch) 566 { 567 if (!utmi_switch) 568 stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC, 569 SWITHOST); 570 else 571 stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC, 572 SWITHOST); 573 usbphyc->switch_setup = utmi_switch; 574 } 575 576 static struct phy *stm32_usbphyc_of_xlate(struct device *dev, 577 struct of_phandle_args *args) 578 { 579 struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); 580 struct stm32_usbphyc_phy *usbphyc_phy = NULL; 581 struct device_node *phynode = args->np; 582 int port = 0; 583 584 for (port = 0; port < usbphyc->nphys; port++) { 585 if (phynode == usbphyc->phys[port]->phy->dev.of_node) { 586 usbphyc_phy = usbphyc->phys[port]; 587 break; 588 } 589 } 590 if (!usbphyc_phy) { 591 dev_err(dev, "failed to find phy\n"); 592 return ERR_PTR(-EINVAL); 593 } 594 595 if (((usbphyc_phy->index == 0) && (args->args_count != 0)) || 596 ((usbphyc_phy->index == 1) && (args->args_count != 1))) { 597 dev_err(dev, "invalid number of cells for phy port%d\n", 598 usbphyc_phy->index); 599 return ERR_PTR(-EINVAL); 600 } 601 602 /* Configure the UTMI switch for PHY port#2 */ 603 if (usbphyc_phy->index == 1) { 604 if (usbphyc->switch_setup < 0) { 605 stm32_usbphyc_switch_setup(usbphyc, args->args[0]); 606 } else { 607 if (args->args[0] != usbphyc->switch_setup) { 608 dev_err(dev, "phy port1 already used\n"); 609 return ERR_PTR(-EBUSY); 610 } 611 } 612 } 613 614 return usbphyc_phy->phy; 615 } 616 617 static int stm32_usbphyc_probe(struct platform_device *pdev) 618 { 619 struct stm32_usbphyc *usbphyc; 620 struct device *dev = &pdev->dev; 621 struct device_node *child, *np = dev->of_node; 622 struct phy_provider *phy_provider; 623 u32 pllen, version; 624 int ret, port = 0; 625 626 usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL); 627 if (!usbphyc) 628 return -ENOMEM; 629 usbphyc->dev = dev; 630 dev_set_drvdata(dev, usbphyc); 631 632 usbphyc->base = devm_platform_ioremap_resource(pdev, 0); 633 if (IS_ERR(usbphyc->base)) 634 return PTR_ERR(usbphyc->base); 635 636 usbphyc->clk = devm_clk_get(dev, NULL); 637 if (IS_ERR(usbphyc->clk)) 638 return dev_err_probe(dev, PTR_ERR(usbphyc->clk), "clk get_failed\n"); 639 640 ret = clk_prepare_enable(usbphyc->clk); 641 if (ret) { 642 dev_err(dev, "clk enable failed: %d\n", ret); 643 return ret; 644 } 645 646 usbphyc->rst = devm_reset_control_get(dev, NULL); 647 if (!IS_ERR(usbphyc->rst)) { 648 reset_control_assert(usbphyc->rst); 649 udelay(2); 650 reset_control_deassert(usbphyc->rst); 651 } else { 652 ret = PTR_ERR(usbphyc->rst); 653 if (ret == -EPROBE_DEFER) 654 goto clk_disable; 655 656 stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_PLL, PLLEN); 657 } 658 659 /* 660 * Wait for minimum width of powerdown pulse (ENABLE = Low): 661 * we have to ensure the PLL is disabled before phys initialization. 662 */ 663 if (readl_relaxed_poll_timeout(usbphyc->base + STM32_USBPHYC_PLL, 664 pllen, !(pllen & PLLEN), 5, 50)) { 665 dev_warn(usbphyc->dev, "PLL not reset\n"); 666 ret = -EPROBE_DEFER; 667 goto clk_disable; 668 } 669 670 usbphyc->switch_setup = -EINVAL; 671 usbphyc->nphys = of_get_child_count(np); 672 usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys, 673 sizeof(*usbphyc->phys), GFP_KERNEL); 674 if (!usbphyc->phys) { 675 ret = -ENOMEM; 676 goto clk_disable; 677 } 678 679 usbphyc->vdda1v1 = devm_regulator_get(dev, "vdda1v1"); 680 if (IS_ERR(usbphyc->vdda1v1)) { 681 ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v1), 682 "failed to get vdda1v1 supply\n"); 683 goto clk_disable; 684 } 685 686 usbphyc->vdda1v8 = devm_regulator_get(dev, "vdda1v8"); 687 if (IS_ERR(usbphyc->vdda1v8)) { 688 ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v8), 689 "failed to get vdda1v8 supply\n"); 690 goto clk_disable; 691 } 692 693 for_each_child_of_node(np, child) { 694 struct stm32_usbphyc_phy *usbphyc_phy; 695 struct phy *phy; 696 u32 index; 697 698 phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops); 699 if (IS_ERR(phy)) { 700 ret = PTR_ERR(phy); 701 if (ret != -EPROBE_DEFER) 702 dev_err(dev, "failed to create phy%d: %d\n", 703 port, ret); 704 goto put_child; 705 } 706 707 usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy), 708 GFP_KERNEL); 709 if (!usbphyc_phy) { 710 ret = -ENOMEM; 711 goto put_child; 712 } 713 714 ret = of_property_read_u32(child, "reg", &index); 715 if (ret || index > usbphyc->nphys) { 716 dev_err(&phy->dev, "invalid reg property: %d\n", ret); 717 if (!ret) 718 ret = -EINVAL; 719 goto put_child; 720 } 721 722 usbphyc->phys[port] = usbphyc_phy; 723 phy_set_bus_width(phy, 8); 724 phy_set_drvdata(phy, usbphyc_phy); 725 726 usbphyc->phys[port]->phy = phy; 727 usbphyc->phys[port]->usbphyc = usbphyc; 728 usbphyc->phys[port]->index = index; 729 usbphyc->phys[port]->active = false; 730 731 usbphyc->phys[port]->vbus = devm_regulator_get_optional(&phy->dev, "vbus"); 732 if (IS_ERR(usbphyc->phys[port]->vbus)) { 733 ret = PTR_ERR(usbphyc->phys[port]->vbus); 734 if (ret == -EPROBE_DEFER) 735 goto put_child; 736 usbphyc->phys[port]->vbus = NULL; 737 } 738 739 /* Configure phy tuning */ 740 stm32_usbphyc_phy_tuning(usbphyc, child, index); 741 742 port++; 743 } 744 745 phy_provider = devm_of_phy_provider_register(dev, 746 stm32_usbphyc_of_xlate); 747 if (IS_ERR(phy_provider)) { 748 ret = PTR_ERR(phy_provider); 749 dev_err(dev, "failed to register phy provider: %d\n", ret); 750 goto clk_disable; 751 } 752 753 ret = stm32_usbphyc_clk48_register(usbphyc); 754 if (ret) { 755 dev_err(dev, "failed to register ck_usbo_48m clock: %d\n", ret); 756 goto clk_disable; 757 } 758 759 version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); 760 dev_info(dev, "registered rev:%lu.%lu\n", 761 FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); 762 763 return 0; 764 765 put_child: 766 of_node_put(child); 767 clk_disable: 768 clk_disable_unprepare(usbphyc->clk); 769 770 return ret; 771 } 772 773 static void stm32_usbphyc_remove(struct platform_device *pdev) 774 { 775 struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev); 776 int port; 777 778 /* Ensure PHYs are not active, to allow PLL disabling */ 779 for (port = 0; port < usbphyc->nphys; port++) 780 if (usbphyc->phys[port]->active) 781 stm32_usbphyc_phy_exit(usbphyc->phys[port]->phy); 782 783 stm32_usbphyc_clk48_unregister(usbphyc); 784 785 clk_disable_unprepare(usbphyc->clk); 786 } 787 788 static int __maybe_unused stm32_usbphyc_resume(struct device *dev) 789 { 790 struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); 791 struct stm32_usbphyc_phy *usbphyc_phy; 792 int port; 793 794 if (usbphyc->switch_setup >= 0) 795 stm32_usbphyc_switch_setup(usbphyc, usbphyc->switch_setup); 796 797 for (port = 0; port < usbphyc->nphys; port++) { 798 usbphyc_phy = usbphyc->phys[port]; 799 writel_relaxed(usbphyc_phy->tune, usbphyc->base + STM32_USBPHYC_TUNE(port)); 800 } 801 802 return 0; 803 } 804 805 static SIMPLE_DEV_PM_OPS(stm32_usbphyc_pm_ops, NULL, stm32_usbphyc_resume); 806 807 static const struct of_device_id stm32_usbphyc_of_match[] = { 808 { .compatible = "st,stm32mp1-usbphyc", }, 809 { }, 810 }; 811 MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match); 812 813 static struct platform_driver stm32_usbphyc_driver = { 814 .probe = stm32_usbphyc_probe, 815 .remove_new = stm32_usbphyc_remove, 816 .driver = { 817 .of_match_table = stm32_usbphyc_of_match, 818 .name = "stm32-usbphyc", 819 .pm = &stm32_usbphyc_pm_ops, 820 } 821 }; 822 module_platform_driver(stm32_usbphyc_driver); 823 824 MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver"); 825 MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); 826 MODULE_LICENSE("GPL v2"); 827