1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Samsung SoC USB 1.1/2.0 PHY driver
4  *
5  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
6  * Author: Kamil Debski <k.debski@samsung.com>
7  */
8 
9 #include <linux/clk.h>
10 #include <linux/mfd/syscon.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/of_address.h>
14 #include <linux/of_device.h>
15 #include <linux/phy/phy.h>
16 #include <linux/platform_device.h>
17 #include <linux/spinlock.h>
18 #include "phy-samsung-usb2.h"
19 
20 static int samsung_usb2_phy_power_on(struct phy *phy)
21 {
22 	struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
23 	struct samsung_usb2_phy_driver *drv = inst->drv;
24 	int ret;
25 
26 	dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n",
27 		inst->cfg->label);
28 
29 	if (drv->vbus) {
30 		ret = regulator_enable(drv->vbus);
31 		if (ret)
32 			goto err_regulator;
33 	}
34 
35 	ret = clk_prepare_enable(drv->clk);
36 	if (ret)
37 		goto err_main_clk;
38 	ret = clk_prepare_enable(drv->ref_clk);
39 	if (ret)
40 		goto err_instance_clk;
41 	if (inst->cfg->power_on) {
42 		spin_lock(&drv->lock);
43 		ret = inst->cfg->power_on(inst);
44 		spin_unlock(&drv->lock);
45 		if (ret)
46 			goto err_power_on;
47 	}
48 
49 	return 0;
50 
51 err_power_on:
52 	clk_disable_unprepare(drv->ref_clk);
53 err_instance_clk:
54 	clk_disable_unprepare(drv->clk);
55 err_main_clk:
56 	if (drv->vbus)
57 		regulator_disable(drv->vbus);
58 err_regulator:
59 	return ret;
60 }
61 
62 static int samsung_usb2_phy_power_off(struct phy *phy)
63 {
64 	struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
65 	struct samsung_usb2_phy_driver *drv = inst->drv;
66 	int ret = 0;
67 
68 	dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n",
69 		inst->cfg->label);
70 	if (inst->cfg->power_off) {
71 		spin_lock(&drv->lock);
72 		ret = inst->cfg->power_off(inst);
73 		spin_unlock(&drv->lock);
74 		if (ret)
75 			return ret;
76 	}
77 	clk_disable_unprepare(drv->ref_clk);
78 	clk_disable_unprepare(drv->clk);
79 	if (drv->vbus)
80 		ret = regulator_disable(drv->vbus);
81 
82 	return ret;
83 }
84 
85 static const struct phy_ops samsung_usb2_phy_ops = {
86 	.power_on	= samsung_usb2_phy_power_on,
87 	.power_off	= samsung_usb2_phy_power_off,
88 	.owner		= THIS_MODULE,
89 };
90 
91 static struct phy *samsung_usb2_phy_xlate(struct device *dev,
92 					struct of_phandle_args *args)
93 {
94 	struct samsung_usb2_phy_driver *drv;
95 
96 	drv = dev_get_drvdata(dev);
97 	if (!drv)
98 		return ERR_PTR(-EINVAL);
99 
100 	if (WARN_ON(args->args[0] >= drv->cfg->num_phys))
101 		return ERR_PTR(-ENODEV);
102 
103 	return drv->instances[args->args[0]].phy;
104 }
105 
106 static const struct of_device_id samsung_usb2_phy_of_match[] = {
107 #ifdef CONFIG_PHY_EXYNOS4X12_USB2
108 	{
109 		.compatible = "samsung,exynos3250-usb2-phy",
110 		.data = &exynos3250_usb2_phy_config,
111 	},
112 #endif
113 #ifdef CONFIG_PHY_EXYNOS4210_USB2
114 	{
115 		.compatible = "samsung,exynos4210-usb2-phy",
116 		.data = &exynos4210_usb2_phy_config,
117 	},
118 #endif
119 #ifdef CONFIG_PHY_EXYNOS4X12_USB2
120 	{
121 		.compatible = "samsung,exynos4x12-usb2-phy",
122 		.data = &exynos4x12_usb2_phy_config,
123 	},
124 #endif
125 #ifdef CONFIG_PHY_EXYNOS5250_USB2
126 	{
127 		.compatible = "samsung,exynos5250-usb2-phy",
128 		.data = &exynos5250_usb2_phy_config,
129 	},
130 #endif
131 #ifdef CONFIG_PHY_S5PV210_USB2
132 	{
133 		.compatible = "samsung,s5pv210-usb2-phy",
134 		.data = &s5pv210_usb2_phy_config,
135 	},
136 #endif
137 	{ },
138 };
139 MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match);
140 
141 static int samsung_usb2_phy_probe(struct platform_device *pdev)
142 {
143 	const struct samsung_usb2_phy_config *cfg;
144 	struct device *dev = &pdev->dev;
145 	struct phy_provider *phy_provider;
146 	struct resource *mem;
147 	struct samsung_usb2_phy_driver *drv;
148 	int i, ret;
149 
150 	if (!pdev->dev.of_node) {
151 		dev_err(dev, "This driver is required to be instantiated from device tree\n");
152 		return -EINVAL;
153 	}
154 
155 	cfg = of_device_get_match_data(dev);
156 	if (!cfg)
157 		return -EINVAL;
158 
159 	drv = devm_kzalloc(dev, struct_size(drv, instances, cfg->num_phys),
160 			   GFP_KERNEL);
161 	if (!drv)
162 		return -ENOMEM;
163 
164 	dev_set_drvdata(dev, drv);
165 	spin_lock_init(&drv->lock);
166 
167 	drv->cfg = cfg;
168 	drv->dev = dev;
169 
170 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
171 	drv->reg_phy = devm_ioremap_resource(dev, mem);
172 	if (IS_ERR(drv->reg_phy)) {
173 		dev_err(dev, "Failed to map register memory (phy)\n");
174 		return PTR_ERR(drv->reg_phy);
175 	}
176 
177 	drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
178 		"samsung,pmureg-phandle");
179 	if (IS_ERR(drv->reg_pmu)) {
180 		dev_err(dev, "Failed to map PMU registers (via syscon)\n");
181 		return PTR_ERR(drv->reg_pmu);
182 	}
183 
184 	if (drv->cfg->has_mode_switch) {
185 		drv->reg_sys = syscon_regmap_lookup_by_phandle(
186 				pdev->dev.of_node, "samsung,sysreg-phandle");
187 		if (IS_ERR(drv->reg_sys)) {
188 			dev_err(dev, "Failed to map system registers (via syscon)\n");
189 			return PTR_ERR(drv->reg_sys);
190 		}
191 	}
192 
193 	drv->clk = devm_clk_get(dev, "phy");
194 	if (IS_ERR(drv->clk)) {
195 		dev_err(dev, "Failed to get clock of phy controller\n");
196 		return PTR_ERR(drv->clk);
197 	}
198 
199 	drv->ref_clk = devm_clk_get(dev, "ref");
200 	if (IS_ERR(drv->ref_clk)) {
201 		dev_err(dev, "Failed to get reference clock for the phy controller\n");
202 		return PTR_ERR(drv->ref_clk);
203 	}
204 
205 	drv->ref_rate = clk_get_rate(drv->ref_clk);
206 	if (drv->cfg->rate_to_clk) {
207 		ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val);
208 		if (ret)
209 			return ret;
210 	}
211 
212 	drv->vbus = devm_regulator_get(dev, "vbus");
213 	if (IS_ERR(drv->vbus)) {
214 		ret = PTR_ERR(drv->vbus);
215 		if (ret == -EPROBE_DEFER)
216 			return ret;
217 		drv->vbus = NULL;
218 	}
219 
220 	for (i = 0; i < drv->cfg->num_phys; i++) {
221 		char *label = drv->cfg->phys[i].label;
222 		struct samsung_usb2_phy_instance *p = &drv->instances[i];
223 
224 		dev_dbg(dev, "Creating phy \"%s\"\n", label);
225 		p->phy = devm_phy_create(dev, NULL, &samsung_usb2_phy_ops);
226 		if (IS_ERR(p->phy)) {
227 			dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n",
228 				label);
229 			return PTR_ERR(p->phy);
230 		}
231 
232 		p->cfg = &drv->cfg->phys[i];
233 		p->drv = drv;
234 		phy_set_bus_width(p->phy, 8);
235 		phy_set_drvdata(p->phy, p);
236 	}
237 
238 	phy_provider = devm_of_phy_provider_register(dev,
239 							samsung_usb2_phy_xlate);
240 	if (IS_ERR(phy_provider)) {
241 		dev_err(drv->dev, "Failed to register phy provider\n");
242 		return PTR_ERR(phy_provider);
243 	}
244 
245 	return 0;
246 }
247 
248 static struct platform_driver samsung_usb2_phy_driver = {
249 	.probe	= samsung_usb2_phy_probe,
250 	.driver = {
251 		.of_match_table	= samsung_usb2_phy_of_match,
252 		.name		= "samsung-usb2-phy",
253 		.suppress_bind_attrs = true,
254 	}
255 };
256 
257 module_platform_driver(samsung_usb2_phy_driver);
258 MODULE_DESCRIPTION("Samsung S5P/Exynos SoC USB PHY driver");
259 MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
260 MODULE_LICENSE("GPL v2");
261 MODULE_ALIAS("platform:samsung-usb2-phy");
262