1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support
4  *
5  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
6  * Author: Kamil Debski <k.debski@samsung.com>
7  */
8 
9 #include <linux/delay.h>
10 #include <linux/io.h>
11 #include <linux/phy/phy.h>
12 #include <linux/regmap.h>
13 #include "phy-samsung-usb2.h"
14 
15 /* Exynos USB PHY registers */
16 
17 /* PHY power control */
18 #define EXYNOS_4x12_UPHYPWR			0x0
19 
20 #define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND	BIT(0)
21 #define EXYNOS_4x12_UPHYPWR_PHY0_PWR		BIT(3)
22 #define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR	BIT(4)
23 #define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP		BIT(5)
24 #define EXYNOS_4x12_UPHYPWR_PHY0 ( \
25 	EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \
26 	EXYNOS_4x12_UPHYPWR_PHY0_PWR | \
27 	EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \
28 	EXYNOS_4x12_UPHYPWR_PHY0_SLEEP)
29 
30 #define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND	BIT(6)
31 #define EXYNOS_4x12_UPHYPWR_PHY1_PWR		BIT(7)
32 #define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP		BIT(8)
33 #define EXYNOS_4x12_UPHYPWR_PHY1 ( \
34 	EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \
35 	EXYNOS_4x12_UPHYPWR_PHY1_PWR | \
36 	EXYNOS_4x12_UPHYPWR_PHY1_SLEEP)
37 
38 #define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND	BIT(9)
39 #define EXYNOS_4x12_UPHYPWR_HSIC0_PWR		BIT(10)
40 #define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP		BIT(11)
41 #define EXYNOS_4x12_UPHYPWR_HSIC0 ( \
42 	EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \
43 	EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \
44 	EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP)
45 
46 #define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND	BIT(12)
47 #define EXYNOS_4x12_UPHYPWR_HSIC1_PWR		BIT(13)
48 #define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP		BIT(14)
49 #define EXYNOS_4x12_UPHYPWR_HSIC1 ( \
50 	EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \
51 	EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \
52 	EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP)
53 
54 /* PHY clock control */
55 #define EXYNOS_4x12_UPHYCLK			0x4
56 
57 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK	(0x7 << 0)
58 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET	0
59 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6	(0x0 << 0)
60 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ	(0x1 << 0)
61 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ	(0x2 << 0)
62 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2	(0x3 << 0)
63 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ	(0x4 << 0)
64 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ	(0x5 << 0)
65 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ	(0x7 << 0)
66 
67 #define EXYNOS_3250_UPHYCLK_REFCLKSEL		(0x2 << 8)
68 
69 #define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP	BIT(3)
70 #define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON	BIT(4)
71 #define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON	BIT(7)
72 
73 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK	(0x7f << 10)
74 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET  10
75 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ	(0x24 << 10)
76 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ	(0x1c << 10)
77 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ	(0x1a << 10)
78 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2	(0x15 << 10)
79 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ	(0x14 << 10)
80 
81 /* PHY reset control */
82 #define EXYNOS_4x12_UPHYRST			0x8
83 
84 #define EXYNOS_4x12_URSTCON_PHY0		BIT(0)
85 #define EXYNOS_4x12_URSTCON_OTG_HLINK		BIT(1)
86 #define EXYNOS_4x12_URSTCON_OTG_PHYLINK		BIT(2)
87 #define EXYNOS_4x12_URSTCON_HOST_PHY		BIT(3)
88 /* The following bit defines are presented in the
89  * order taken from the Exynos4412 reference manual.
90  *
91  * During experiments with the hardware and debugging
92  * it was determined that the hardware behaves contrary
93  * to the manual.
94  *
95  * The following bit values were chaned accordingly to the
96  * results of real hardware experiments.
97  */
98 #define EXYNOS_4x12_URSTCON_PHY1		BIT(4)
99 #define EXYNOS_4x12_URSTCON_HSIC0		BIT(6)
100 #define EXYNOS_4x12_URSTCON_HSIC1		BIT(5)
101 #define EXYNOS_4x12_URSTCON_HOST_LINK_ALL	BIT(7)
102 #define EXYNOS_4x12_URSTCON_HOST_LINK_P0	BIT(10)
103 #define EXYNOS_4x12_URSTCON_HOST_LINK_P1	BIT(9)
104 #define EXYNOS_4x12_URSTCON_HOST_LINK_P2	BIT(8)
105 
106 /* Isolation, configured in the power management unit */
107 #define EXYNOS_4x12_USB_ISOL_OFFSET		0x704
108 #define EXYNOS_4x12_USB_ISOL_OTG		BIT(0)
109 #define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET	0x708
110 #define EXYNOS_4x12_USB_ISOL_HSIC0		BIT(0)
111 #define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET	0x70c
112 #define EXYNOS_4x12_USB_ISOL_HSIC1		BIT(0)
113 
114 /* Mode switching SUB Device <-> Host */
115 #define EXYNOS_4x12_MODE_SWITCH_OFFSET		0x21c
116 #define EXYNOS_4x12_MODE_SWITCH_MASK		1
117 #define EXYNOS_4x12_MODE_SWITCH_DEVICE		0
118 #define EXYNOS_4x12_MODE_SWITCH_HOST		1
119 
120 enum exynos4x12_phy_id {
121 	EXYNOS4x12_DEVICE,
122 	EXYNOS4x12_HOST,
123 	EXYNOS4x12_HSIC0,
124 	EXYNOS4x12_HSIC1,
125 	EXYNOS4x12_NUM_PHYS,
126 };
127 
128 /*
129  * exynos4x12_rate_to_clk() converts the supplied clock rate to the value that
130  * can be written to the phy register.
131  */
132 static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg)
133 {
134 	/* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */
135 
136 	switch (rate) {
137 	case 9600 * KHZ:
138 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6;
139 		break;
140 	case 10 * MHZ:
141 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ;
142 		break;
143 	case 12 * MHZ:
144 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ;
145 		break;
146 	case 19200 * KHZ:
147 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2;
148 		break;
149 	case 20 * MHZ:
150 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ;
151 		break;
152 	case 24 * MHZ:
153 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ;
154 		break;
155 	case 50 * MHZ:
156 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ;
157 		break;
158 	default:
159 		return -EINVAL;
160 	}
161 
162 	return 0;
163 }
164 
165 static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on)
166 {
167 	struct samsung_usb2_phy_driver *drv = inst->drv;
168 	u32 offset;
169 	u32 mask;
170 
171 	switch (inst->cfg->id) {
172 	case EXYNOS4x12_DEVICE:
173 	case EXYNOS4x12_HOST:
174 		offset = EXYNOS_4x12_USB_ISOL_OFFSET;
175 		mask = EXYNOS_4x12_USB_ISOL_OTG;
176 		break;
177 	case EXYNOS4x12_HSIC0:
178 		offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET;
179 		mask = EXYNOS_4x12_USB_ISOL_HSIC0;
180 		break;
181 	case EXYNOS4x12_HSIC1:
182 		offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET;
183 		mask = EXYNOS_4x12_USB_ISOL_HSIC1;
184 		break;
185 	default:
186 		return;
187 	}
188 
189 	regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
190 }
191 
192 static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst)
193 {
194 	struct samsung_usb2_phy_driver *drv = inst->drv;
195 	u32 clk;
196 
197 	clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK);
198 	clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK;
199 
200 	if (drv->cfg->has_refclk_sel)
201 		clk = EXYNOS_3250_UPHYCLK_REFCLKSEL;
202 
203 	clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET;
204 	clk |= EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON;
205 	writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK);
206 }
207 
208 static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
209 {
210 	struct samsung_usb2_phy_driver *drv = inst->drv;
211 	u32 rstbits = 0;
212 	u32 phypwr = 0;
213 	u32 rst;
214 	u32 pwr;
215 
216 	switch (inst->cfg->id) {
217 	case EXYNOS4x12_DEVICE:
218 		phypwr =	EXYNOS_4x12_UPHYPWR_PHY0;
219 		rstbits =	EXYNOS_4x12_URSTCON_PHY0;
220 		break;
221 	case EXYNOS4x12_HOST:
222 		phypwr =	EXYNOS_4x12_UPHYPWR_PHY1;
223 		rstbits =	EXYNOS_4x12_URSTCON_HOST_PHY |
224 				EXYNOS_4x12_URSTCON_PHY1 |
225 				EXYNOS_4x12_URSTCON_HOST_LINK_P0;
226 		break;
227 	case EXYNOS4x12_HSIC0:
228 		phypwr =	EXYNOS_4x12_UPHYPWR_HSIC0;
229 		rstbits =	EXYNOS_4x12_URSTCON_HSIC0 |
230 				EXYNOS_4x12_URSTCON_HOST_LINK_P1;
231 		break;
232 	case EXYNOS4x12_HSIC1:
233 		phypwr =	EXYNOS_4x12_UPHYPWR_HSIC1;
234 		rstbits =	EXYNOS_4x12_URSTCON_HSIC1 |
235 				EXYNOS_4x12_URSTCON_HOST_LINK_P1;
236 		break;
237 	}
238 
239 	if (on) {
240 		pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
241 		pwr &= ~phypwr;
242 		writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);
243 
244 		rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST);
245 		rst |= rstbits;
246 		writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
247 		udelay(10);
248 		rst &= ~rstbits;
249 		writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
250 		/* The following delay is necessary for the reset sequence to be
251 		 * completed */
252 		udelay(80);
253 	} else {
254 		pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
255 		pwr |= phypwr;
256 		writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);
257 	}
258 }
259 
260 static void exynos4x12_power_on_int(struct samsung_usb2_phy_instance *inst)
261 {
262 	if (inst->int_cnt++ > 0)
263 		return;
264 
265 	exynos4x12_setup_clk(inst);
266 	exynos4x12_isol(inst, 0);
267 	exynos4x12_phy_pwr(inst, 1);
268 }
269 
270 static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst)
271 {
272 	struct samsung_usb2_phy_driver *drv = inst->drv;
273 
274 	if (inst->ext_cnt++ > 0)
275 		return 0;
276 
277 	if (inst->cfg->id == EXYNOS4x12_HOST) {
278 		regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
279 						EXYNOS_4x12_MODE_SWITCH_MASK,
280 						EXYNOS_4x12_MODE_SWITCH_HOST);
281 		exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]);
282 	}
283 
284 	if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch)
285 		regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
286 						EXYNOS_4x12_MODE_SWITCH_MASK,
287 						EXYNOS_4x12_MODE_SWITCH_DEVICE);
288 
289 	if (inst->cfg->id == EXYNOS4x12_HSIC0 ||
290 		inst->cfg->id == EXYNOS4x12_HSIC1) {
291 		exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]);
292 		exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_HOST]);
293 	}
294 
295 	exynos4x12_power_on_int(inst);
296 
297 	return 0;
298 }
299 
300 static void exynos4x12_power_off_int(struct samsung_usb2_phy_instance *inst)
301 {
302 	if (inst->int_cnt-- > 1)
303 		return;
304 
305 	exynos4x12_isol(inst, 1);
306 	exynos4x12_phy_pwr(inst, 0);
307 }
308 
309 static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst)
310 {
311 	struct samsung_usb2_phy_driver *drv = inst->drv;
312 
313 	if (inst->ext_cnt-- > 1)
314 		return 0;
315 
316 	if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch)
317 		regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
318 						EXYNOS_4x12_MODE_SWITCH_MASK,
319 						EXYNOS_4x12_MODE_SWITCH_HOST);
320 
321 	if (inst->cfg->id == EXYNOS4x12_HOST)
322 		exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]);
323 
324 	if (inst->cfg->id == EXYNOS4x12_HSIC0 ||
325 		inst->cfg->id == EXYNOS4x12_HSIC1) {
326 		exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]);
327 		exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_HOST]);
328 	}
329 
330 	exynos4x12_power_off_int(inst);
331 
332 	return 0;
333 }
334 
335 
336 static const struct samsung_usb2_common_phy exynos4x12_phys[] = {
337 	{
338 		.label		= "device",
339 		.id		= EXYNOS4x12_DEVICE,
340 		.power_on	= exynos4x12_power_on,
341 		.power_off	= exynos4x12_power_off,
342 	},
343 	{
344 		.label		= "host",
345 		.id		= EXYNOS4x12_HOST,
346 		.power_on	= exynos4x12_power_on,
347 		.power_off	= exynos4x12_power_off,
348 	},
349 	{
350 		.label		= "hsic0",
351 		.id		= EXYNOS4x12_HSIC0,
352 		.power_on	= exynos4x12_power_on,
353 		.power_off	= exynos4x12_power_off,
354 	},
355 	{
356 		.label		= "hsic1",
357 		.id		= EXYNOS4x12_HSIC1,
358 		.power_on	= exynos4x12_power_on,
359 		.power_off	= exynos4x12_power_off,
360 	},
361 };
362 
363 const struct samsung_usb2_phy_config exynos3250_usb2_phy_config = {
364 	.has_refclk_sel		= 1,
365 	.num_phys		= 1,
366 	.phys			= exynos4x12_phys,
367 	.rate_to_clk		= exynos4x12_rate_to_clk,
368 };
369 
370 const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = {
371 	.has_mode_switch	= 1,
372 	.num_phys		= EXYNOS4x12_NUM_PHYS,
373 	.phys			= exynos4x12_phys,
374 	.rate_to_clk		= exynos4x12_rate_to_clk,
375 };
376