1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Renesas R-Car Gen3 for USB3.0 PHY driver 4 * 5 * Copyright (C) 2017 Renesas Electronics Corporation 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/delay.h> 10 #include <linux/io.h> 11 #include <linux/module.h> 12 #include <linux/of.h> 13 #include <linux/phy/phy.h> 14 #include <linux/platform_device.h> 15 #include <linux/pm_runtime.h> 16 17 #define USB30_CLKSET0 0x034 18 #define USB30_CLKSET1 0x036 19 #define USB30_SSC_SET 0x038 20 #define USB30_PHY_ENABLE 0x060 21 #define USB30_VBUS_EN 0x064 22 23 /* USB30_CLKSET0 */ 24 #define CLKSET0_PRIVATE 0x05c0 25 #define CLKSET0_USB30_FSEL_USB_EXTAL 0x0002 26 27 /* USB30_CLKSET1 */ 28 #define CLKSET1_USB30_PLL_MULTI_SHIFT 6 29 #define CLKSET1_USB30_PLL_MULTI_USB_EXTAL (0x64 << \ 30 CLKSET1_USB30_PLL_MULTI_SHIFT) 31 #define CLKSET1_PHYRESET BIT(4) /* 1: reset */ 32 #define CLKSET1_REF_CLKDIV BIT(3) /* 1: USB_EXTAL */ 33 #define CLKSET1_PRIVATE_2_1 BIT(1) /* Write B'01 */ 34 #define CLKSET1_REF_CLK_SEL BIT(0) /* 1: USB3S0_CLK_P */ 35 36 /* USB30_SSC_SET */ 37 #define SSC_SET_SSC_EN BIT(12) 38 #define SSC_SET_RANGE_SHIFT 9 39 #define SSC_SET_RANGE_4980 (0x0 << SSC_SET_RANGE_SHIFT) 40 #define SSC_SET_RANGE_4492 (0x1 << SSC_SET_RANGE_SHIFT) 41 #define SSC_SET_RANGE_4003 (0x2 << SSC_SET_RANGE_SHIFT) 42 43 /* USB30_PHY_ENABLE */ 44 #define PHY_ENABLE_RESET_EN BIT(4) 45 46 /* USB30_VBUS_EN */ 47 #define VBUS_EN_VBUS_EN BIT(1) 48 49 struct rcar_gen3_usb3 { 50 void __iomem *base; 51 struct phy *phy; 52 u32 ssc_range; 53 bool usb3s_clk; 54 bool usb_extal; 55 }; 56 57 static void write_clkset1_for_usb_extal(struct rcar_gen3_usb3 *r, bool reset) 58 { 59 u16 val = CLKSET1_USB30_PLL_MULTI_USB_EXTAL | 60 CLKSET1_REF_CLKDIV | CLKSET1_PRIVATE_2_1; 61 62 if (reset) 63 val |= CLKSET1_PHYRESET; 64 65 writew(val, r->base + USB30_CLKSET1); 66 } 67 68 static void rcar_gen3_phy_usb3_enable_ssc(struct rcar_gen3_usb3 *r) 69 { 70 u16 val = SSC_SET_SSC_EN; 71 72 switch (r->ssc_range) { 73 case 4980: 74 val |= SSC_SET_RANGE_4980; 75 break; 76 case 4492: 77 val |= SSC_SET_RANGE_4492; 78 break; 79 case 4003: 80 val |= SSC_SET_RANGE_4003; 81 break; 82 default: 83 dev_err(&r->phy->dev, "%s: unsupported range (%x)\n", __func__, 84 r->ssc_range); 85 return; 86 } 87 88 writew(val, r->base + USB30_SSC_SET); 89 } 90 91 static void rcar_gen3_phy_usb3_select_usb_extal(struct rcar_gen3_usb3 *r) 92 { 93 write_clkset1_for_usb_extal(r, false); 94 if (r->ssc_range) 95 rcar_gen3_phy_usb3_enable_ssc(r); 96 writew(CLKSET0_PRIVATE | CLKSET0_USB30_FSEL_USB_EXTAL, 97 r->base + USB30_CLKSET0); 98 writew(PHY_ENABLE_RESET_EN, r->base + USB30_PHY_ENABLE); 99 write_clkset1_for_usb_extal(r, true); 100 usleep_range(10, 20); 101 write_clkset1_for_usb_extal(r, false); 102 } 103 104 static int rcar_gen3_phy_usb3_init(struct phy *p) 105 { 106 struct rcar_gen3_usb3 *r = phy_get_drvdata(p); 107 108 dev_vdbg(&r->phy->dev, "%s: enter (%d, %d, %d)\n", __func__, 109 r->usb3s_clk, r->usb_extal, r->ssc_range); 110 111 if (!r->usb3s_clk && r->usb_extal) 112 rcar_gen3_phy_usb3_select_usb_extal(r); 113 114 /* Enables VBUS detection anyway */ 115 writew(VBUS_EN_VBUS_EN, r->base + USB30_VBUS_EN); 116 117 return 0; 118 } 119 120 static const struct phy_ops rcar_gen3_phy_usb3_ops = { 121 .init = rcar_gen3_phy_usb3_init, 122 .owner = THIS_MODULE, 123 }; 124 125 static const struct of_device_id rcar_gen3_phy_usb3_match_table[] = { 126 { .compatible = "renesas,rcar-gen3-usb3-phy" }, 127 { } 128 }; 129 MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb3_match_table); 130 131 static int rcar_gen3_phy_usb3_probe(struct platform_device *pdev) 132 { 133 struct device *dev = &pdev->dev; 134 struct rcar_gen3_usb3 *r; 135 struct phy_provider *provider; 136 int ret = 0; 137 struct clk *clk; 138 139 if (!dev->of_node) { 140 dev_err(dev, "This driver needs device tree\n"); 141 return -EINVAL; 142 } 143 144 r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL); 145 if (!r) 146 return -ENOMEM; 147 148 r->base = devm_platform_ioremap_resource(pdev, 0); 149 if (IS_ERR(r->base)) 150 return PTR_ERR(r->base); 151 152 clk = devm_clk_get(dev, "usb3s_clk"); 153 if (!IS_ERR(clk) && !clk_prepare_enable(clk)) { 154 r->usb3s_clk = !!clk_get_rate(clk); 155 clk_disable_unprepare(clk); 156 } 157 clk = devm_clk_get(dev, "usb_extal"); 158 if (!IS_ERR(clk) && !clk_prepare_enable(clk)) { 159 r->usb_extal = !!clk_get_rate(clk); 160 clk_disable_unprepare(clk); 161 } 162 163 if (!r->usb3s_clk && !r->usb_extal) { 164 dev_err(dev, "This driver needs usb3s_clk and/or usb_extal\n"); 165 ret = -EINVAL; 166 goto error; 167 } 168 169 /* 170 * devm_phy_create() will call pm_runtime_enable(&phy->dev); 171 * And then, phy-core will manage runtime pm for this device. 172 */ 173 pm_runtime_enable(dev); 174 175 r->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb3_ops); 176 if (IS_ERR(r->phy)) { 177 dev_err(dev, "Failed to create USB3 PHY\n"); 178 ret = PTR_ERR(r->phy); 179 goto error; 180 } 181 182 of_property_read_u32(dev->of_node, "renesas,ssc-range", &r->ssc_range); 183 184 platform_set_drvdata(pdev, r); 185 phy_set_drvdata(r->phy, r); 186 187 provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); 188 if (IS_ERR(provider)) { 189 dev_err(dev, "Failed to register PHY provider\n"); 190 ret = PTR_ERR(provider); 191 goto error; 192 } 193 194 return 0; 195 196 error: 197 pm_runtime_disable(dev); 198 199 return ret; 200 } 201 202 static int rcar_gen3_phy_usb3_remove(struct platform_device *pdev) 203 { 204 pm_runtime_disable(&pdev->dev); 205 206 return 0; 207 }; 208 209 static struct platform_driver rcar_gen3_phy_usb3_driver = { 210 .driver = { 211 .name = "phy_rcar_gen3_usb3", 212 .of_match_table = rcar_gen3_phy_usb3_match_table, 213 }, 214 .probe = rcar_gen3_phy_usb3_probe, 215 .remove = rcar_gen3_phy_usb3_remove, 216 }; 217 module_platform_driver(rcar_gen3_phy_usb3_driver); 218 219 MODULE_LICENSE("GPL v2"); 220 MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 3.0 PHY"); 221 MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>"); 222