1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Renesas R-Car Gen3 for USB2.0 PHY driver 4 * 5 * Copyright (C) 2015-2017 Renesas Electronics Corporation 6 * 7 * This is based on the phy-rcar-gen2 driver: 8 * Copyright (C) 2014 Renesas Solutions Corp. 9 * Copyright (C) 2014 Cogent Embedded, Inc. 10 */ 11 12 #include <linux/extcon-provider.h> 13 #include <linux/interrupt.h> 14 #include <linux/io.h> 15 #include <linux/module.h> 16 #include <linux/mutex.h> 17 #include <linux/of.h> 18 #include <linux/of_address.h> 19 #include <linux/of_device.h> 20 #include <linux/phy/phy.h> 21 #include <linux/platform_device.h> 22 #include <linux/pm_runtime.h> 23 #include <linux/regulator/consumer.h> 24 #include <linux/string.h> 25 #include <linux/usb/of.h> 26 #include <linux/workqueue.h> 27 28 /******* USB2.0 Host registers (original offset is +0x200) *******/ 29 #define USB2_INT_ENABLE 0x000 30 #define USB2_USBCTR 0x00c 31 #define USB2_SPD_RSM_TIMSET 0x10c 32 #define USB2_OC_TIMSET 0x110 33 #define USB2_COMMCTRL 0x600 34 #define USB2_OBINTSTA 0x604 35 #define USB2_OBINTEN 0x608 36 #define USB2_VBCTRL 0x60c 37 #define USB2_LINECTRL1 0x610 38 #define USB2_ADPCTRL 0x630 39 40 /* INT_ENABLE */ 41 #define USB2_INT_ENABLE_UCOM_INTEN BIT(3) 42 #define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) /* For EHCI */ 43 #define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) /* For OHCI */ 44 45 /* USBCTR */ 46 #define USB2_USBCTR_DIRPD BIT(2) 47 #define USB2_USBCTR_PLL_RST BIT(1) 48 49 /* SPD_RSM_TIMSET */ 50 #define USB2_SPD_RSM_TIMSET_INIT 0x014e029b 51 52 /* OC_TIMSET */ 53 #define USB2_OC_TIMSET_INIT 0x000209ab 54 55 /* COMMCTRL */ 56 #define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */ 57 58 /* OBINTSTA and OBINTEN */ 59 #define USB2_OBINT_SESSVLDCHG BIT(12) 60 #define USB2_OBINT_IDDIGCHG BIT(11) 61 #define USB2_OBINT_BITS (USB2_OBINT_SESSVLDCHG | \ 62 USB2_OBINT_IDDIGCHG) 63 64 /* VBCTRL */ 65 #define USB2_VBCTRL_OCCLREN BIT(16) 66 #define USB2_VBCTRL_DRVVBUSSEL BIT(8) 67 68 /* LINECTRL1 */ 69 #define USB2_LINECTRL1_DPRPD_EN BIT(19) 70 #define USB2_LINECTRL1_DP_RPD BIT(18) 71 #define USB2_LINECTRL1_DMRPD_EN BIT(17) 72 #define USB2_LINECTRL1_DM_RPD BIT(16) 73 #define USB2_LINECTRL1_OPMODE_NODRV BIT(6) 74 75 /* ADPCTRL */ 76 #define USB2_ADPCTRL_OTGSESSVLD BIT(20) 77 #define USB2_ADPCTRL_IDDIG BIT(19) 78 #define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */ 79 #define USB2_ADPCTRL_DRVVBUS BIT(4) 80 81 #define NUM_OF_PHYS 4 82 enum rcar_gen3_phy_index { 83 PHY_INDEX_BOTH_HC, 84 PHY_INDEX_OHCI, 85 PHY_INDEX_EHCI, 86 PHY_INDEX_HSUSB 87 }; 88 89 static const u32 rcar_gen3_int_enable[NUM_OF_PHYS] = { 90 USB2_INT_ENABLE_USBH_INTB_EN | USB2_INT_ENABLE_USBH_INTA_EN, 91 USB2_INT_ENABLE_USBH_INTA_EN, 92 USB2_INT_ENABLE_USBH_INTB_EN, 93 0 94 }; 95 96 struct rcar_gen3_phy { 97 struct phy *phy; 98 struct rcar_gen3_chan *ch; 99 u32 int_enable_bits; 100 bool initialized; 101 bool otg_initialized; 102 bool powered; 103 }; 104 105 struct rcar_gen3_chan { 106 void __iomem *base; 107 struct device *dev; /* platform_device's device */ 108 struct extcon_dev *extcon; 109 struct rcar_gen3_phy rphys[NUM_OF_PHYS]; 110 struct regulator *vbus; 111 struct work_struct work; 112 struct mutex lock; /* protects rphys[...].powered */ 113 enum usb_dr_mode dr_mode; 114 int irq; 115 bool extcon_host; 116 bool is_otg_channel; 117 bool uses_otg_pins; 118 }; 119 120 /* 121 * Combination about is_otg_channel and uses_otg_pins: 122 * 123 * Parameters || Behaviors 124 * is_otg_channel | uses_otg_pins || irqs | role sysfs 125 * ---------------------+---------------++--------------+------------ 126 * true | true || enabled | enabled 127 * true | false || disabled | enabled 128 * false | any || disabled | disabled 129 */ 130 131 static void rcar_gen3_phy_usb2_work(struct work_struct *work) 132 { 133 struct rcar_gen3_chan *ch = container_of(work, struct rcar_gen3_chan, 134 work); 135 136 if (ch->extcon_host) { 137 extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, true); 138 extcon_set_state_sync(ch->extcon, EXTCON_USB, false); 139 } else { 140 extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, false); 141 extcon_set_state_sync(ch->extcon, EXTCON_USB, true); 142 } 143 } 144 145 static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host) 146 { 147 void __iomem *usb2_base = ch->base; 148 u32 val = readl(usb2_base + USB2_COMMCTRL); 149 150 dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, host); 151 if (host) 152 val &= ~USB2_COMMCTRL_OTG_PERI; 153 else 154 val |= USB2_COMMCTRL_OTG_PERI; 155 writel(val, usb2_base + USB2_COMMCTRL); 156 } 157 158 static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm) 159 { 160 void __iomem *usb2_base = ch->base; 161 u32 val = readl(usb2_base + USB2_LINECTRL1); 162 163 dev_vdbg(ch->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm); 164 val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD); 165 if (dp) 166 val |= USB2_LINECTRL1_DP_RPD; 167 if (dm) 168 val |= USB2_LINECTRL1_DM_RPD; 169 writel(val, usb2_base + USB2_LINECTRL1); 170 } 171 172 static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus) 173 { 174 void __iomem *usb2_base = ch->base; 175 u32 val = readl(usb2_base + USB2_ADPCTRL); 176 177 dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus); 178 if (vbus) 179 val |= USB2_ADPCTRL_DRVVBUS; 180 else 181 val &= ~USB2_ADPCTRL_DRVVBUS; 182 writel(val, usb2_base + USB2_ADPCTRL); 183 } 184 185 static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable) 186 { 187 void __iomem *usb2_base = ch->base; 188 u32 val = readl(usb2_base + USB2_OBINTEN); 189 190 if (ch->uses_otg_pins && enable) 191 val |= USB2_OBINT_BITS; 192 else 193 val &= ~USB2_OBINT_BITS; 194 writel(val, usb2_base + USB2_OBINTEN); 195 } 196 197 static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch) 198 { 199 rcar_gen3_set_linectrl(ch, 1, 1); 200 rcar_gen3_set_host_mode(ch, 1); 201 rcar_gen3_enable_vbus_ctrl(ch, 1); 202 203 ch->extcon_host = true; 204 schedule_work(&ch->work); 205 } 206 207 static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch) 208 { 209 rcar_gen3_set_linectrl(ch, 0, 1); 210 rcar_gen3_set_host_mode(ch, 0); 211 rcar_gen3_enable_vbus_ctrl(ch, 0); 212 213 ch->extcon_host = false; 214 schedule_work(&ch->work); 215 } 216 217 static void rcar_gen3_init_for_b_host(struct rcar_gen3_chan *ch) 218 { 219 void __iomem *usb2_base = ch->base; 220 u32 val; 221 222 val = readl(usb2_base + USB2_LINECTRL1); 223 writel(val | USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1); 224 225 rcar_gen3_set_linectrl(ch, 1, 1); 226 rcar_gen3_set_host_mode(ch, 1); 227 rcar_gen3_enable_vbus_ctrl(ch, 0); 228 229 val = readl(usb2_base + USB2_LINECTRL1); 230 writel(val & ~USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1); 231 } 232 233 static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch) 234 { 235 rcar_gen3_set_linectrl(ch, 0, 1); 236 rcar_gen3_set_host_mode(ch, 0); 237 rcar_gen3_enable_vbus_ctrl(ch, 1); 238 } 239 240 static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch) 241 { 242 rcar_gen3_control_otg_irq(ch, 0); 243 244 rcar_gen3_enable_vbus_ctrl(ch, 1); 245 rcar_gen3_init_for_host(ch); 246 247 rcar_gen3_control_otg_irq(ch, 1); 248 } 249 250 static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch) 251 { 252 if (!ch->uses_otg_pins) 253 return (ch->dr_mode == USB_DR_MODE_HOST) ? false : true; 254 255 return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG); 256 } 257 258 static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch) 259 { 260 if (!rcar_gen3_check_id(ch)) 261 rcar_gen3_init_for_host(ch); 262 else 263 rcar_gen3_init_for_peri(ch); 264 } 265 266 static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch) 267 { 268 return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI); 269 } 270 271 static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch) 272 { 273 if (rcar_gen3_is_host(ch)) 274 return PHY_MODE_USB_HOST; 275 276 return PHY_MODE_USB_DEVICE; 277 } 278 279 static bool rcar_gen3_is_any_rphy_initialized(struct rcar_gen3_chan *ch) 280 { 281 int i; 282 283 for (i = 0; i < NUM_OF_PHYS; i++) { 284 if (ch->rphys[i].initialized) 285 return true; 286 } 287 288 return false; 289 } 290 291 static bool rcar_gen3_needs_init_otg(struct rcar_gen3_chan *ch) 292 { 293 int i; 294 295 for (i = 0; i < NUM_OF_PHYS; i++) { 296 if (ch->rphys[i].otg_initialized) 297 return false; 298 } 299 300 return true; 301 } 302 303 static bool rcar_gen3_are_all_rphys_power_off(struct rcar_gen3_chan *ch) 304 { 305 int i; 306 307 for (i = 0; i < NUM_OF_PHYS; i++) { 308 if (ch->rphys[i].powered) 309 return false; 310 } 311 312 return true; 313 } 314 315 static ssize_t role_store(struct device *dev, struct device_attribute *attr, 316 const char *buf, size_t count) 317 { 318 struct rcar_gen3_chan *ch = dev_get_drvdata(dev); 319 bool is_b_device; 320 enum phy_mode cur_mode, new_mode; 321 322 if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch)) 323 return -EIO; 324 325 if (sysfs_streq(buf, "host")) 326 new_mode = PHY_MODE_USB_HOST; 327 else if (sysfs_streq(buf, "peripheral")) 328 new_mode = PHY_MODE_USB_DEVICE; 329 else 330 return -EINVAL; 331 332 /* is_b_device: true is B-Device. false is A-Device. */ 333 is_b_device = rcar_gen3_check_id(ch); 334 cur_mode = rcar_gen3_get_phy_mode(ch); 335 336 /* If current and new mode is the same, this returns the error */ 337 if (cur_mode == new_mode) 338 return -EINVAL; 339 340 if (new_mode == PHY_MODE_USB_HOST) { /* And is_host must be false */ 341 if (!is_b_device) /* A-Peripheral */ 342 rcar_gen3_init_from_a_peri_to_a_host(ch); 343 else /* B-Peripheral */ 344 rcar_gen3_init_for_b_host(ch); 345 } else { /* And is_host must be true */ 346 if (!is_b_device) /* A-Host */ 347 rcar_gen3_init_for_a_peri(ch); 348 else /* B-Host */ 349 rcar_gen3_init_for_peri(ch); 350 } 351 352 return count; 353 } 354 355 static ssize_t role_show(struct device *dev, struct device_attribute *attr, 356 char *buf) 357 { 358 struct rcar_gen3_chan *ch = dev_get_drvdata(dev); 359 360 if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch)) 361 return -EIO; 362 363 return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" : 364 "peripheral"); 365 } 366 static DEVICE_ATTR_RW(role); 367 368 static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) 369 { 370 void __iomem *usb2_base = ch->base; 371 u32 val; 372 373 /* Should not use functions of read-modify-write a register */ 374 val = readl(usb2_base + USB2_LINECTRL1); 375 val = (val & ~USB2_LINECTRL1_DP_RPD) | USB2_LINECTRL1_DPRPD_EN | 376 USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD; 377 writel(val, usb2_base + USB2_LINECTRL1); 378 379 val = readl(usb2_base + USB2_VBCTRL); 380 val &= ~USB2_VBCTRL_OCCLREN; 381 writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL); 382 val = readl(usb2_base + USB2_ADPCTRL); 383 writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); 384 385 msleep(20); 386 387 writel(0xffffffff, usb2_base + USB2_OBINTSTA); 388 writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN); 389 390 rcar_gen3_device_recognition(ch); 391 } 392 393 static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) 394 { 395 struct rcar_gen3_chan *ch = _ch; 396 void __iomem *usb2_base = ch->base; 397 u32 status = readl(usb2_base + USB2_OBINTSTA); 398 irqreturn_t ret = IRQ_NONE; 399 400 if (status & USB2_OBINT_BITS) { 401 dev_vdbg(ch->dev, "%s: %08x\n", __func__, status); 402 writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA); 403 rcar_gen3_device_recognition(ch); 404 ret = IRQ_HANDLED; 405 } 406 407 return ret; 408 } 409 410 static int rcar_gen3_phy_usb2_init(struct phy *p) 411 { 412 struct rcar_gen3_phy *rphy = phy_get_drvdata(p); 413 struct rcar_gen3_chan *channel = rphy->ch; 414 void __iomem *usb2_base = channel->base; 415 u32 val; 416 int ret; 417 418 if (!rcar_gen3_is_any_rphy_initialized(channel) && channel->irq >= 0) { 419 INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work); 420 ret = request_irq(channel->irq, rcar_gen3_phy_usb2_irq, 421 IRQF_SHARED, dev_name(channel->dev), channel); 422 if (ret < 0) { 423 dev_err(channel->dev, "No irq handler (%d)\n", channel->irq); 424 return ret; 425 } 426 } 427 428 /* Initialize USB2 part */ 429 val = readl(usb2_base + USB2_INT_ENABLE); 430 val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; 431 writel(val, usb2_base + USB2_INT_ENABLE); 432 writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET); 433 writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET); 434 435 /* Initialize otg part */ 436 if (channel->is_otg_channel) { 437 if (rcar_gen3_needs_init_otg(channel)) 438 rcar_gen3_init_otg(channel); 439 rphy->otg_initialized = true; 440 } 441 442 rphy->initialized = true; 443 444 return 0; 445 } 446 447 static int rcar_gen3_phy_usb2_exit(struct phy *p) 448 { 449 struct rcar_gen3_phy *rphy = phy_get_drvdata(p); 450 struct rcar_gen3_chan *channel = rphy->ch; 451 void __iomem *usb2_base = channel->base; 452 u32 val; 453 454 rphy->initialized = false; 455 456 if (channel->is_otg_channel) 457 rphy->otg_initialized = false; 458 459 val = readl(usb2_base + USB2_INT_ENABLE); 460 val &= ~rphy->int_enable_bits; 461 if (!rcar_gen3_is_any_rphy_initialized(channel)) 462 val &= ~USB2_INT_ENABLE_UCOM_INTEN; 463 writel(val, usb2_base + USB2_INT_ENABLE); 464 465 if (channel->irq >= 0 && !rcar_gen3_is_any_rphy_initialized(channel)) 466 free_irq(channel->irq, channel); 467 468 return 0; 469 } 470 471 static int rcar_gen3_phy_usb2_power_on(struct phy *p) 472 { 473 struct rcar_gen3_phy *rphy = phy_get_drvdata(p); 474 struct rcar_gen3_chan *channel = rphy->ch; 475 void __iomem *usb2_base = channel->base; 476 u32 val; 477 int ret = 0; 478 479 mutex_lock(&channel->lock); 480 if (!rcar_gen3_are_all_rphys_power_off(channel)) 481 goto out; 482 483 if (channel->vbus) { 484 ret = regulator_enable(channel->vbus); 485 if (ret) 486 goto out; 487 } 488 489 val = readl(usb2_base + USB2_USBCTR); 490 val |= USB2_USBCTR_PLL_RST; 491 writel(val, usb2_base + USB2_USBCTR); 492 val &= ~USB2_USBCTR_PLL_RST; 493 writel(val, usb2_base + USB2_USBCTR); 494 495 out: 496 /* The powered flag should be set for any other phys anyway */ 497 rphy->powered = true; 498 mutex_unlock(&channel->lock); 499 500 return 0; 501 } 502 503 static int rcar_gen3_phy_usb2_power_off(struct phy *p) 504 { 505 struct rcar_gen3_phy *rphy = phy_get_drvdata(p); 506 struct rcar_gen3_chan *channel = rphy->ch; 507 int ret = 0; 508 509 mutex_lock(&channel->lock); 510 rphy->powered = false; 511 512 if (!rcar_gen3_are_all_rphys_power_off(channel)) 513 goto out; 514 515 if (channel->vbus) 516 ret = regulator_disable(channel->vbus); 517 518 out: 519 mutex_unlock(&channel->lock); 520 521 return ret; 522 } 523 524 static const struct phy_ops rcar_gen3_phy_usb2_ops = { 525 .init = rcar_gen3_phy_usb2_init, 526 .exit = rcar_gen3_phy_usb2_exit, 527 .power_on = rcar_gen3_phy_usb2_power_on, 528 .power_off = rcar_gen3_phy_usb2_power_off, 529 .owner = THIS_MODULE, 530 }; 531 532 static const struct phy_ops rz_g1c_phy_usb2_ops = { 533 .init = rcar_gen3_phy_usb2_init, 534 .exit = rcar_gen3_phy_usb2_exit, 535 .owner = THIS_MODULE, 536 }; 537 538 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { 539 { 540 .compatible = "renesas,usb2-phy-r8a77470", 541 .data = &rz_g1c_phy_usb2_ops, 542 }, 543 { 544 .compatible = "renesas,usb2-phy-r8a7795", 545 .data = &rcar_gen3_phy_usb2_ops, 546 }, 547 { 548 .compatible = "renesas,usb2-phy-r8a7796", 549 .data = &rcar_gen3_phy_usb2_ops, 550 }, 551 { 552 .compatible = "renesas,usb2-phy-r8a77965", 553 .data = &rcar_gen3_phy_usb2_ops, 554 }, 555 { 556 .compatible = "renesas,rcar-gen3-usb2-phy", 557 .data = &rcar_gen3_phy_usb2_ops, 558 }, 559 { /* sentinel */ }, 560 }; 561 MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table); 562 563 static const unsigned int rcar_gen3_phy_cable[] = { 564 EXTCON_USB, 565 EXTCON_USB_HOST, 566 EXTCON_NONE, 567 }; 568 569 static struct phy *rcar_gen3_phy_usb2_xlate(struct device *dev, 570 struct of_phandle_args *args) 571 { 572 struct rcar_gen3_chan *ch = dev_get_drvdata(dev); 573 574 if (args->args_count == 0) /* For old version dts */ 575 return ch->rphys[PHY_INDEX_BOTH_HC].phy; 576 else if (args->args_count > 1) /* Prevent invalid args count */ 577 return ERR_PTR(-ENODEV); 578 579 if (args->args[0] >= NUM_OF_PHYS) 580 return ERR_PTR(-ENODEV); 581 582 return ch->rphys[args->args[0]].phy; 583 } 584 585 static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np) 586 { 587 enum usb_dr_mode candidate = USB_DR_MODE_UNKNOWN; 588 int i; 589 590 /* 591 * If one of device nodes has other dr_mode except UNKNOWN, 592 * this function returns UNKNOWN. To achieve backward compatibility, 593 * this loop starts the index as 0. 594 */ 595 for (i = 0; i < NUM_OF_PHYS; i++) { 596 enum usb_dr_mode mode = of_usb_get_dr_mode_by_phy(np, i); 597 598 if (mode != USB_DR_MODE_UNKNOWN) { 599 if (candidate == USB_DR_MODE_UNKNOWN) 600 candidate = mode; 601 else if (candidate != mode) 602 return USB_DR_MODE_UNKNOWN; 603 } 604 } 605 606 return candidate; 607 } 608 609 static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) 610 { 611 struct device *dev = &pdev->dev; 612 struct rcar_gen3_chan *channel; 613 struct phy_provider *provider; 614 struct resource *res; 615 const struct phy_ops *phy_usb2_ops; 616 int ret = 0, i; 617 618 if (!dev->of_node) { 619 dev_err(dev, "This driver needs device tree\n"); 620 return -EINVAL; 621 } 622 623 channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL); 624 if (!channel) 625 return -ENOMEM; 626 627 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 628 channel->base = devm_ioremap_resource(dev, res); 629 if (IS_ERR(channel->base)) 630 return PTR_ERR(channel->base); 631 632 /* get irq number here and request_irq for OTG in phy_init */ 633 channel->irq = platform_get_irq_optional(pdev, 0); 634 channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node); 635 if (channel->dr_mode != USB_DR_MODE_UNKNOWN) { 636 int ret; 637 638 channel->is_otg_channel = true; 639 channel->uses_otg_pins = !of_property_read_bool(dev->of_node, 640 "renesas,no-otg-pins"); 641 channel->extcon = devm_extcon_dev_allocate(dev, 642 rcar_gen3_phy_cable); 643 if (IS_ERR(channel->extcon)) 644 return PTR_ERR(channel->extcon); 645 646 ret = devm_extcon_dev_register(dev, channel->extcon); 647 if (ret < 0) { 648 dev_err(dev, "Failed to register extcon\n"); 649 return ret; 650 } 651 } 652 653 /* 654 * devm_phy_create() will call pm_runtime_enable(&phy->dev); 655 * And then, phy-core will manage runtime pm for this device. 656 */ 657 pm_runtime_enable(dev); 658 phy_usb2_ops = of_device_get_match_data(dev); 659 if (!phy_usb2_ops) 660 return -EINVAL; 661 662 mutex_init(&channel->lock); 663 for (i = 0; i < NUM_OF_PHYS; i++) { 664 channel->rphys[i].phy = devm_phy_create(dev, NULL, 665 phy_usb2_ops); 666 if (IS_ERR(channel->rphys[i].phy)) { 667 dev_err(dev, "Failed to create USB2 PHY\n"); 668 ret = PTR_ERR(channel->rphys[i].phy); 669 goto error; 670 } 671 channel->rphys[i].ch = channel; 672 channel->rphys[i].int_enable_bits = rcar_gen3_int_enable[i]; 673 phy_set_drvdata(channel->rphys[i].phy, &channel->rphys[i]); 674 } 675 676 channel->vbus = devm_regulator_get_optional(dev, "vbus"); 677 if (IS_ERR(channel->vbus)) { 678 if (PTR_ERR(channel->vbus) == -EPROBE_DEFER) { 679 ret = PTR_ERR(channel->vbus); 680 goto error; 681 } 682 channel->vbus = NULL; 683 } 684 685 platform_set_drvdata(pdev, channel); 686 channel->dev = dev; 687 688 provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate); 689 if (IS_ERR(provider)) { 690 dev_err(dev, "Failed to register PHY provider\n"); 691 ret = PTR_ERR(provider); 692 goto error; 693 } else if (channel->is_otg_channel) { 694 int ret; 695 696 ret = device_create_file(dev, &dev_attr_role); 697 if (ret < 0) 698 goto error; 699 } 700 701 return 0; 702 703 error: 704 pm_runtime_disable(dev); 705 706 return ret; 707 } 708 709 static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev) 710 { 711 struct rcar_gen3_chan *channel = platform_get_drvdata(pdev); 712 713 if (channel->is_otg_channel) 714 device_remove_file(&pdev->dev, &dev_attr_role); 715 716 pm_runtime_disable(&pdev->dev); 717 718 return 0; 719 }; 720 721 static struct platform_driver rcar_gen3_phy_usb2_driver = { 722 .driver = { 723 .name = "phy_rcar_gen3_usb2", 724 .of_match_table = rcar_gen3_phy_usb2_match_table, 725 }, 726 .probe = rcar_gen3_phy_usb2_probe, 727 .remove = rcar_gen3_phy_usb2_remove, 728 }; 729 module_platform_driver(rcar_gen3_phy_usb2_driver); 730 731 MODULE_LICENSE("GPL v2"); 732 MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY"); 733 MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>"); 734