1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Renesas R-Car Gen3 for USB2.0 PHY driver 4 * 5 * Copyright (C) 2015-2017 Renesas Electronics Corporation 6 * 7 * This is based on the phy-rcar-gen2 driver: 8 * Copyright (C) 2014 Renesas Solutions Corp. 9 * Copyright (C) 2014 Cogent Embedded, Inc. 10 */ 11 12 #include <linux/extcon-provider.h> 13 #include <linux/interrupt.h> 14 #include <linux/io.h> 15 #include <linux/module.h> 16 #include <linux/mutex.h> 17 #include <linux/of.h> 18 #include <linux/phy/phy.h> 19 #include <linux/platform_device.h> 20 #include <linux/pm_runtime.h> 21 #include <linux/regulator/consumer.h> 22 #include <linux/string.h> 23 #include <linux/usb/of.h> 24 #include <linux/workqueue.h> 25 26 /******* USB2.0 Host registers (original offset is +0x200) *******/ 27 #define USB2_INT_ENABLE 0x000 28 #define USB2_USBCTR 0x00c 29 #define USB2_SPD_RSM_TIMSET 0x10c 30 #define USB2_OC_TIMSET 0x110 31 #define USB2_COMMCTRL 0x600 32 #define USB2_OBINTSTA 0x604 33 #define USB2_OBINTEN 0x608 34 #define USB2_VBCTRL 0x60c 35 #define USB2_LINECTRL1 0x610 36 #define USB2_ADPCTRL 0x630 37 38 /* INT_ENABLE */ 39 #define USB2_INT_ENABLE_UCOM_INTEN BIT(3) 40 #define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) /* For EHCI */ 41 #define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) /* For OHCI */ 42 43 /* USBCTR */ 44 #define USB2_USBCTR_DIRPD BIT(2) 45 #define USB2_USBCTR_PLL_RST BIT(1) 46 47 /* SPD_RSM_TIMSET */ 48 #define USB2_SPD_RSM_TIMSET_INIT 0x014e029b 49 50 /* OC_TIMSET */ 51 #define USB2_OC_TIMSET_INIT 0x000209ab 52 53 /* COMMCTRL */ 54 #define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */ 55 56 /* OBINTSTA and OBINTEN */ 57 #define USB2_OBINT_SESSVLDCHG BIT(12) 58 #define USB2_OBINT_IDDIGCHG BIT(11) 59 #define USB2_OBINT_BITS (USB2_OBINT_SESSVLDCHG | \ 60 USB2_OBINT_IDDIGCHG) 61 62 /* VBCTRL */ 63 #define USB2_VBCTRL_OCCLREN BIT(16) 64 #define USB2_VBCTRL_DRVVBUSSEL BIT(8) 65 #define USB2_VBCTRL_VBOUT BIT(0) 66 67 /* LINECTRL1 */ 68 #define USB2_LINECTRL1_DPRPD_EN BIT(19) 69 #define USB2_LINECTRL1_DP_RPD BIT(18) 70 #define USB2_LINECTRL1_DMRPD_EN BIT(17) 71 #define USB2_LINECTRL1_DM_RPD BIT(16) 72 #define USB2_LINECTRL1_OPMODE_NODRV BIT(6) 73 74 /* ADPCTRL */ 75 #define USB2_ADPCTRL_OTGSESSVLD BIT(20) 76 #define USB2_ADPCTRL_IDDIG BIT(19) 77 #define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */ 78 #define USB2_ADPCTRL_DRVVBUS BIT(4) 79 80 /* RZ/G2L specific */ 81 #define USB2_OBINT_IDCHG_EN BIT(0) 82 #define USB2_LINECTRL1_USB2_IDMON BIT(0) 83 84 #define NUM_OF_PHYS 4 85 enum rcar_gen3_phy_index { 86 PHY_INDEX_BOTH_HC, 87 PHY_INDEX_OHCI, 88 PHY_INDEX_EHCI, 89 PHY_INDEX_HSUSB 90 }; 91 92 static const u32 rcar_gen3_int_enable[NUM_OF_PHYS] = { 93 USB2_INT_ENABLE_USBH_INTB_EN | USB2_INT_ENABLE_USBH_INTA_EN, 94 USB2_INT_ENABLE_USBH_INTA_EN, 95 USB2_INT_ENABLE_USBH_INTB_EN, 96 0 97 }; 98 99 struct rcar_gen3_phy { 100 struct phy *phy; 101 struct rcar_gen3_chan *ch; 102 u32 int_enable_bits; 103 bool initialized; 104 bool otg_initialized; 105 bool powered; 106 }; 107 108 struct rcar_gen3_chan { 109 void __iomem *base; 110 struct device *dev; /* platform_device's device */ 111 struct extcon_dev *extcon; 112 struct rcar_gen3_phy rphys[NUM_OF_PHYS]; 113 struct regulator *vbus; 114 struct work_struct work; 115 struct mutex lock; /* protects rphys[...].powered */ 116 enum usb_dr_mode dr_mode; 117 int irq; 118 u32 obint_enable_bits; 119 bool extcon_host; 120 bool is_otg_channel; 121 bool uses_otg_pins; 122 bool soc_no_adp_ctrl; 123 }; 124 125 struct rcar_gen3_phy_drv_data { 126 const struct phy_ops *phy_usb2_ops; 127 bool no_adp_ctrl; 128 }; 129 130 /* 131 * Combination about is_otg_channel and uses_otg_pins: 132 * 133 * Parameters || Behaviors 134 * is_otg_channel | uses_otg_pins || irqs | role sysfs 135 * ---------------------+---------------++--------------+------------ 136 * true | true || enabled | enabled 137 * true | false || disabled | enabled 138 * false | any || disabled | disabled 139 */ 140 141 static void rcar_gen3_phy_usb2_work(struct work_struct *work) 142 { 143 struct rcar_gen3_chan *ch = container_of(work, struct rcar_gen3_chan, 144 work); 145 146 if (ch->extcon_host) { 147 extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, true); 148 extcon_set_state_sync(ch->extcon, EXTCON_USB, false); 149 } else { 150 extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, false); 151 extcon_set_state_sync(ch->extcon, EXTCON_USB, true); 152 } 153 } 154 155 static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host) 156 { 157 void __iomem *usb2_base = ch->base; 158 u32 val = readl(usb2_base + USB2_COMMCTRL); 159 160 dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, host); 161 if (host) 162 val &= ~USB2_COMMCTRL_OTG_PERI; 163 else 164 val |= USB2_COMMCTRL_OTG_PERI; 165 writel(val, usb2_base + USB2_COMMCTRL); 166 } 167 168 static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm) 169 { 170 void __iomem *usb2_base = ch->base; 171 u32 val = readl(usb2_base + USB2_LINECTRL1); 172 173 dev_vdbg(ch->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm); 174 val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD); 175 if (dp) 176 val |= USB2_LINECTRL1_DP_RPD; 177 if (dm) 178 val |= USB2_LINECTRL1_DM_RPD; 179 writel(val, usb2_base + USB2_LINECTRL1); 180 } 181 182 static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus) 183 { 184 void __iomem *usb2_base = ch->base; 185 u32 vbus_ctrl_reg = USB2_ADPCTRL; 186 u32 vbus_ctrl_val = USB2_ADPCTRL_DRVVBUS; 187 u32 val; 188 189 dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus); 190 if (ch->soc_no_adp_ctrl) { 191 vbus_ctrl_reg = USB2_VBCTRL; 192 vbus_ctrl_val = USB2_VBCTRL_VBOUT; 193 } 194 195 val = readl(usb2_base + vbus_ctrl_reg); 196 if (vbus) 197 val |= vbus_ctrl_val; 198 else 199 val &= ~vbus_ctrl_val; 200 writel(val, usb2_base + vbus_ctrl_reg); 201 } 202 203 static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable) 204 { 205 void __iomem *usb2_base = ch->base; 206 u32 val = readl(usb2_base + USB2_OBINTEN); 207 208 if (ch->uses_otg_pins && enable) 209 val |= ch->obint_enable_bits; 210 else 211 val &= ~ch->obint_enable_bits; 212 writel(val, usb2_base + USB2_OBINTEN); 213 } 214 215 static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch) 216 { 217 rcar_gen3_set_linectrl(ch, 1, 1); 218 rcar_gen3_set_host_mode(ch, 1); 219 rcar_gen3_enable_vbus_ctrl(ch, 1); 220 221 ch->extcon_host = true; 222 schedule_work(&ch->work); 223 } 224 225 static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch) 226 { 227 rcar_gen3_set_linectrl(ch, 0, 1); 228 rcar_gen3_set_host_mode(ch, 0); 229 rcar_gen3_enable_vbus_ctrl(ch, 0); 230 231 ch->extcon_host = false; 232 schedule_work(&ch->work); 233 } 234 235 static void rcar_gen3_init_for_b_host(struct rcar_gen3_chan *ch) 236 { 237 void __iomem *usb2_base = ch->base; 238 u32 val; 239 240 val = readl(usb2_base + USB2_LINECTRL1); 241 writel(val | USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1); 242 243 rcar_gen3_set_linectrl(ch, 1, 1); 244 rcar_gen3_set_host_mode(ch, 1); 245 rcar_gen3_enable_vbus_ctrl(ch, 0); 246 247 val = readl(usb2_base + USB2_LINECTRL1); 248 writel(val & ~USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1); 249 } 250 251 static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch) 252 { 253 rcar_gen3_set_linectrl(ch, 0, 1); 254 rcar_gen3_set_host_mode(ch, 0); 255 rcar_gen3_enable_vbus_ctrl(ch, 1); 256 } 257 258 static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch) 259 { 260 rcar_gen3_control_otg_irq(ch, 0); 261 262 rcar_gen3_enable_vbus_ctrl(ch, 1); 263 rcar_gen3_init_for_host(ch); 264 265 rcar_gen3_control_otg_irq(ch, 1); 266 } 267 268 static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch) 269 { 270 if (!ch->uses_otg_pins) 271 return (ch->dr_mode == USB_DR_MODE_HOST) ? false : true; 272 273 if (ch->soc_no_adp_ctrl) 274 return !!(readl(ch->base + USB2_LINECTRL1) & USB2_LINECTRL1_USB2_IDMON); 275 276 return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG); 277 } 278 279 static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch) 280 { 281 if (!rcar_gen3_check_id(ch)) 282 rcar_gen3_init_for_host(ch); 283 else 284 rcar_gen3_init_for_peri(ch); 285 } 286 287 static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch) 288 { 289 return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI); 290 } 291 292 static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch) 293 { 294 if (rcar_gen3_is_host(ch)) 295 return PHY_MODE_USB_HOST; 296 297 return PHY_MODE_USB_DEVICE; 298 } 299 300 static bool rcar_gen3_is_any_rphy_initialized(struct rcar_gen3_chan *ch) 301 { 302 int i; 303 304 for (i = 0; i < NUM_OF_PHYS; i++) { 305 if (ch->rphys[i].initialized) 306 return true; 307 } 308 309 return false; 310 } 311 312 static bool rcar_gen3_needs_init_otg(struct rcar_gen3_chan *ch) 313 { 314 int i; 315 316 for (i = 0; i < NUM_OF_PHYS; i++) { 317 if (ch->rphys[i].otg_initialized) 318 return false; 319 } 320 321 return true; 322 } 323 324 static bool rcar_gen3_are_all_rphys_power_off(struct rcar_gen3_chan *ch) 325 { 326 int i; 327 328 for (i = 0; i < NUM_OF_PHYS; i++) { 329 if (ch->rphys[i].powered) 330 return false; 331 } 332 333 return true; 334 } 335 336 static ssize_t role_store(struct device *dev, struct device_attribute *attr, 337 const char *buf, size_t count) 338 { 339 struct rcar_gen3_chan *ch = dev_get_drvdata(dev); 340 bool is_b_device; 341 enum phy_mode cur_mode, new_mode; 342 343 if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch)) 344 return -EIO; 345 346 if (sysfs_streq(buf, "host")) 347 new_mode = PHY_MODE_USB_HOST; 348 else if (sysfs_streq(buf, "peripheral")) 349 new_mode = PHY_MODE_USB_DEVICE; 350 else 351 return -EINVAL; 352 353 /* is_b_device: true is B-Device. false is A-Device. */ 354 is_b_device = rcar_gen3_check_id(ch); 355 cur_mode = rcar_gen3_get_phy_mode(ch); 356 357 /* If current and new mode is the same, this returns the error */ 358 if (cur_mode == new_mode) 359 return -EINVAL; 360 361 if (new_mode == PHY_MODE_USB_HOST) { /* And is_host must be false */ 362 if (!is_b_device) /* A-Peripheral */ 363 rcar_gen3_init_from_a_peri_to_a_host(ch); 364 else /* B-Peripheral */ 365 rcar_gen3_init_for_b_host(ch); 366 } else { /* And is_host must be true */ 367 if (!is_b_device) /* A-Host */ 368 rcar_gen3_init_for_a_peri(ch); 369 else /* B-Host */ 370 rcar_gen3_init_for_peri(ch); 371 } 372 373 return count; 374 } 375 376 static ssize_t role_show(struct device *dev, struct device_attribute *attr, 377 char *buf) 378 { 379 struct rcar_gen3_chan *ch = dev_get_drvdata(dev); 380 381 if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch)) 382 return -EIO; 383 384 return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" : 385 "peripheral"); 386 } 387 static DEVICE_ATTR_RW(role); 388 389 static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) 390 { 391 void __iomem *usb2_base = ch->base; 392 u32 val; 393 394 /* Should not use functions of read-modify-write a register */ 395 val = readl(usb2_base + USB2_LINECTRL1); 396 val = (val & ~USB2_LINECTRL1_DP_RPD) | USB2_LINECTRL1_DPRPD_EN | 397 USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD; 398 writel(val, usb2_base + USB2_LINECTRL1); 399 400 if (!ch->soc_no_adp_ctrl) { 401 val = readl(usb2_base + USB2_VBCTRL); 402 val &= ~USB2_VBCTRL_OCCLREN; 403 writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL); 404 val = readl(usb2_base + USB2_ADPCTRL); 405 writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); 406 } 407 msleep(20); 408 409 writel(0xffffffff, usb2_base + USB2_OBINTSTA); 410 writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN); 411 412 rcar_gen3_device_recognition(ch); 413 } 414 415 static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) 416 { 417 struct rcar_gen3_chan *ch = _ch; 418 void __iomem *usb2_base = ch->base; 419 u32 status = readl(usb2_base + USB2_OBINTSTA); 420 irqreturn_t ret = IRQ_NONE; 421 422 if (status & ch->obint_enable_bits) { 423 dev_vdbg(ch->dev, "%s: %08x\n", __func__, status); 424 writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); 425 rcar_gen3_device_recognition(ch); 426 ret = IRQ_HANDLED; 427 } 428 429 return ret; 430 } 431 432 static int rcar_gen3_phy_usb2_init(struct phy *p) 433 { 434 struct rcar_gen3_phy *rphy = phy_get_drvdata(p); 435 struct rcar_gen3_chan *channel = rphy->ch; 436 void __iomem *usb2_base = channel->base; 437 u32 val; 438 int ret; 439 440 if (!rcar_gen3_is_any_rphy_initialized(channel) && channel->irq >= 0) { 441 INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work); 442 ret = request_irq(channel->irq, rcar_gen3_phy_usb2_irq, 443 IRQF_SHARED, dev_name(channel->dev), channel); 444 if (ret < 0) { 445 dev_err(channel->dev, "No irq handler (%d)\n", channel->irq); 446 return ret; 447 } 448 } 449 450 /* Initialize USB2 part */ 451 val = readl(usb2_base + USB2_INT_ENABLE); 452 val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; 453 writel(val, usb2_base + USB2_INT_ENABLE); 454 writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET); 455 writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET); 456 457 /* Initialize otg part */ 458 if (channel->is_otg_channel) { 459 if (rcar_gen3_needs_init_otg(channel)) 460 rcar_gen3_init_otg(channel); 461 rphy->otg_initialized = true; 462 } 463 464 rphy->initialized = true; 465 466 return 0; 467 } 468 469 static int rcar_gen3_phy_usb2_exit(struct phy *p) 470 { 471 struct rcar_gen3_phy *rphy = phy_get_drvdata(p); 472 struct rcar_gen3_chan *channel = rphy->ch; 473 void __iomem *usb2_base = channel->base; 474 u32 val; 475 476 rphy->initialized = false; 477 478 if (channel->is_otg_channel) 479 rphy->otg_initialized = false; 480 481 val = readl(usb2_base + USB2_INT_ENABLE); 482 val &= ~rphy->int_enable_bits; 483 if (!rcar_gen3_is_any_rphy_initialized(channel)) 484 val &= ~USB2_INT_ENABLE_UCOM_INTEN; 485 writel(val, usb2_base + USB2_INT_ENABLE); 486 487 if (channel->irq >= 0 && !rcar_gen3_is_any_rphy_initialized(channel)) 488 free_irq(channel->irq, channel); 489 490 return 0; 491 } 492 493 static int rcar_gen3_phy_usb2_power_on(struct phy *p) 494 { 495 struct rcar_gen3_phy *rphy = phy_get_drvdata(p); 496 struct rcar_gen3_chan *channel = rphy->ch; 497 void __iomem *usb2_base = channel->base; 498 u32 val; 499 int ret = 0; 500 501 mutex_lock(&channel->lock); 502 if (!rcar_gen3_are_all_rphys_power_off(channel)) 503 goto out; 504 505 if (channel->vbus) { 506 ret = regulator_enable(channel->vbus); 507 if (ret) 508 goto out; 509 } 510 511 val = readl(usb2_base + USB2_USBCTR); 512 val |= USB2_USBCTR_PLL_RST; 513 writel(val, usb2_base + USB2_USBCTR); 514 val &= ~USB2_USBCTR_PLL_RST; 515 writel(val, usb2_base + USB2_USBCTR); 516 517 out: 518 /* The powered flag should be set for any other phys anyway */ 519 rphy->powered = true; 520 mutex_unlock(&channel->lock); 521 522 return 0; 523 } 524 525 static int rcar_gen3_phy_usb2_power_off(struct phy *p) 526 { 527 struct rcar_gen3_phy *rphy = phy_get_drvdata(p); 528 struct rcar_gen3_chan *channel = rphy->ch; 529 int ret = 0; 530 531 mutex_lock(&channel->lock); 532 rphy->powered = false; 533 534 if (!rcar_gen3_are_all_rphys_power_off(channel)) 535 goto out; 536 537 if (channel->vbus) 538 ret = regulator_disable(channel->vbus); 539 540 out: 541 mutex_unlock(&channel->lock); 542 543 return ret; 544 } 545 546 static const struct phy_ops rcar_gen3_phy_usb2_ops = { 547 .init = rcar_gen3_phy_usb2_init, 548 .exit = rcar_gen3_phy_usb2_exit, 549 .power_on = rcar_gen3_phy_usb2_power_on, 550 .power_off = rcar_gen3_phy_usb2_power_off, 551 .owner = THIS_MODULE, 552 }; 553 554 static const struct phy_ops rz_g1c_phy_usb2_ops = { 555 .init = rcar_gen3_phy_usb2_init, 556 .exit = rcar_gen3_phy_usb2_exit, 557 .owner = THIS_MODULE, 558 }; 559 560 static const struct rcar_gen3_phy_drv_data rcar_gen3_phy_usb2_data = { 561 .phy_usb2_ops = &rcar_gen3_phy_usb2_ops, 562 .no_adp_ctrl = false, 563 }; 564 565 static const struct rcar_gen3_phy_drv_data rz_g1c_phy_usb2_data = { 566 .phy_usb2_ops = &rz_g1c_phy_usb2_ops, 567 .no_adp_ctrl = false, 568 }; 569 570 static const struct rcar_gen3_phy_drv_data rz_g2l_phy_usb2_data = { 571 .phy_usb2_ops = &rcar_gen3_phy_usb2_ops, 572 .no_adp_ctrl = true, 573 }; 574 575 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { 576 { 577 .compatible = "renesas,usb2-phy-r8a77470", 578 .data = &rz_g1c_phy_usb2_data, 579 }, 580 { 581 .compatible = "renesas,usb2-phy-r8a7795", 582 .data = &rcar_gen3_phy_usb2_data, 583 }, 584 { 585 .compatible = "renesas,usb2-phy-r8a7796", 586 .data = &rcar_gen3_phy_usb2_data, 587 }, 588 { 589 .compatible = "renesas,usb2-phy-r8a77965", 590 .data = &rcar_gen3_phy_usb2_data, 591 }, 592 { 593 .compatible = "renesas,rzg2l-usb2-phy", 594 .data = &rz_g2l_phy_usb2_data, 595 }, 596 { 597 .compatible = "renesas,rcar-gen3-usb2-phy", 598 .data = &rcar_gen3_phy_usb2_data, 599 }, 600 { /* sentinel */ }, 601 }; 602 MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table); 603 604 static const unsigned int rcar_gen3_phy_cable[] = { 605 EXTCON_USB, 606 EXTCON_USB_HOST, 607 EXTCON_NONE, 608 }; 609 610 static struct phy *rcar_gen3_phy_usb2_xlate(struct device *dev, 611 struct of_phandle_args *args) 612 { 613 struct rcar_gen3_chan *ch = dev_get_drvdata(dev); 614 615 if (args->args_count == 0) /* For old version dts */ 616 return ch->rphys[PHY_INDEX_BOTH_HC].phy; 617 else if (args->args_count > 1) /* Prevent invalid args count */ 618 return ERR_PTR(-ENODEV); 619 620 if (args->args[0] >= NUM_OF_PHYS) 621 return ERR_PTR(-ENODEV); 622 623 return ch->rphys[args->args[0]].phy; 624 } 625 626 static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np) 627 { 628 enum usb_dr_mode candidate = USB_DR_MODE_UNKNOWN; 629 int i; 630 631 /* 632 * If one of device nodes has other dr_mode except UNKNOWN, 633 * this function returns UNKNOWN. To achieve backward compatibility, 634 * this loop starts the index as 0. 635 */ 636 for (i = 0; i < NUM_OF_PHYS; i++) { 637 enum usb_dr_mode mode = of_usb_get_dr_mode_by_phy(np, i); 638 639 if (mode != USB_DR_MODE_UNKNOWN) { 640 if (candidate == USB_DR_MODE_UNKNOWN) 641 candidate = mode; 642 else if (candidate != mode) 643 return USB_DR_MODE_UNKNOWN; 644 } 645 } 646 647 return candidate; 648 } 649 650 static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) 651 { 652 const struct rcar_gen3_phy_drv_data *phy_data; 653 struct device *dev = &pdev->dev; 654 struct rcar_gen3_chan *channel; 655 struct phy_provider *provider; 656 int ret = 0, i; 657 658 if (!dev->of_node) { 659 dev_err(dev, "This driver needs device tree\n"); 660 return -EINVAL; 661 } 662 663 channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL); 664 if (!channel) 665 return -ENOMEM; 666 667 channel->base = devm_platform_ioremap_resource(pdev, 0); 668 if (IS_ERR(channel->base)) 669 return PTR_ERR(channel->base); 670 671 channel->obint_enable_bits = USB2_OBINT_BITS; 672 /* get irq number here and request_irq for OTG in phy_init */ 673 channel->irq = platform_get_irq_optional(pdev, 0); 674 channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node); 675 if (channel->dr_mode != USB_DR_MODE_UNKNOWN) { 676 int ret; 677 678 channel->is_otg_channel = true; 679 channel->uses_otg_pins = !of_property_read_bool(dev->of_node, 680 "renesas,no-otg-pins"); 681 channel->extcon = devm_extcon_dev_allocate(dev, 682 rcar_gen3_phy_cable); 683 if (IS_ERR(channel->extcon)) 684 return PTR_ERR(channel->extcon); 685 686 ret = devm_extcon_dev_register(dev, channel->extcon); 687 if (ret < 0) { 688 dev_err(dev, "Failed to register extcon\n"); 689 return ret; 690 } 691 } 692 693 /* 694 * devm_phy_create() will call pm_runtime_enable(&phy->dev); 695 * And then, phy-core will manage runtime pm for this device. 696 */ 697 pm_runtime_enable(dev); 698 699 phy_data = of_device_get_match_data(dev); 700 if (!phy_data) { 701 ret = -EINVAL; 702 goto error; 703 } 704 705 channel->soc_no_adp_ctrl = phy_data->no_adp_ctrl; 706 if (phy_data->no_adp_ctrl) 707 channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; 708 709 mutex_init(&channel->lock); 710 for (i = 0; i < NUM_OF_PHYS; i++) { 711 channel->rphys[i].phy = devm_phy_create(dev, NULL, 712 phy_data->phy_usb2_ops); 713 if (IS_ERR(channel->rphys[i].phy)) { 714 dev_err(dev, "Failed to create USB2 PHY\n"); 715 ret = PTR_ERR(channel->rphys[i].phy); 716 goto error; 717 } 718 channel->rphys[i].ch = channel; 719 channel->rphys[i].int_enable_bits = rcar_gen3_int_enable[i]; 720 phy_set_drvdata(channel->rphys[i].phy, &channel->rphys[i]); 721 } 722 723 channel->vbus = devm_regulator_get_optional(dev, "vbus"); 724 if (IS_ERR(channel->vbus)) { 725 if (PTR_ERR(channel->vbus) == -EPROBE_DEFER) { 726 ret = PTR_ERR(channel->vbus); 727 goto error; 728 } 729 channel->vbus = NULL; 730 } 731 732 platform_set_drvdata(pdev, channel); 733 channel->dev = dev; 734 735 provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate); 736 if (IS_ERR(provider)) { 737 dev_err(dev, "Failed to register PHY provider\n"); 738 ret = PTR_ERR(provider); 739 goto error; 740 } else if (channel->is_otg_channel) { 741 int ret; 742 743 ret = device_create_file(dev, &dev_attr_role); 744 if (ret < 0) 745 goto error; 746 } 747 748 return 0; 749 750 error: 751 pm_runtime_disable(dev); 752 753 return ret; 754 } 755 756 static void rcar_gen3_phy_usb2_remove(struct platform_device *pdev) 757 { 758 struct rcar_gen3_chan *channel = platform_get_drvdata(pdev); 759 760 if (channel->is_otg_channel) 761 device_remove_file(&pdev->dev, &dev_attr_role); 762 763 pm_runtime_disable(&pdev->dev); 764 }; 765 766 static struct platform_driver rcar_gen3_phy_usb2_driver = { 767 .driver = { 768 .name = "phy_rcar_gen3_usb2", 769 .of_match_table = rcar_gen3_phy_usb2_match_table, 770 }, 771 .probe = rcar_gen3_phy_usb2_probe, 772 .remove_new = rcar_gen3_phy_usb2_remove, 773 }; 774 module_platform_driver(rcar_gen3_phy_usb2_driver); 775 776 MODULE_LICENSE("GPL v2"); 777 MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY"); 778 MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>"); 779