1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2017 John Crispin <john@phrozen.org>
4  *
5  * Based on code from
6  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
7  */
8 
9 #include <linux/delay.h>
10 #include <linux/err.h>
11 #include <linux/io.h>
12 #include <linux/kernel.h>
13 #include <linux/mfd/syscon.h>
14 #include <linux/module.h>
15 #include <linux/mutex.h>
16 #include <linux/of_platform.h>
17 #include <linux/phy/phy.h>
18 #include <linux/platform_device.h>
19 #include <linux/regmap.h>
20 #include <linux/reset.h>
21 
22 #define RT_SYSC_REG_SYSCFG1		0x014
23 #define RT_SYSC_REG_CLKCFG1		0x030
24 #define RT_SYSC_REG_USB_PHY_CFG		0x05c
25 
26 #define OFS_U2_PHY_AC0			0x800
27 #define OFS_U2_PHY_AC1			0x804
28 #define OFS_U2_PHY_AC2			0x808
29 #define OFS_U2_PHY_ACR0			0x810
30 #define OFS_U2_PHY_ACR1			0x814
31 #define OFS_U2_PHY_ACR2			0x818
32 #define OFS_U2_PHY_ACR3			0x81C
33 #define OFS_U2_PHY_ACR4			0x820
34 #define OFS_U2_PHY_AMON0		0x824
35 #define OFS_U2_PHY_DCR0			0x860
36 #define OFS_U2_PHY_DCR1			0x864
37 #define OFS_U2_PHY_DTM0			0x868
38 #define OFS_U2_PHY_DTM1			0x86C
39 
40 #define RT_RSTCTRL_UDEV			BIT(25)
41 #define RT_RSTCTRL_UHST			BIT(22)
42 #define RT_SYSCFG1_USB0_HOST_MODE	BIT(10)
43 
44 #define MT7620_CLKCFG1_UPHY0_CLK_EN	BIT(25)
45 #define MT7620_CLKCFG1_UPHY1_CLK_EN	BIT(22)
46 #define RT_CLKCFG1_UPHY1_CLK_EN		BIT(20)
47 #define RT_CLKCFG1_UPHY0_CLK_EN		BIT(18)
48 
49 #define USB_PHY_UTMI_8B60M		BIT(1)
50 #define UDEV_WAKEUP			BIT(0)
51 
52 struct ralink_usb_phy {
53 	struct reset_control	*rstdev;
54 	struct reset_control	*rsthost;
55 	u32			clk;
56 	struct phy		*phy;
57 	void __iomem		*base;
58 	struct regmap		*sysctl;
59 };
60 
61 static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg)
62 {
63 	writel(val, phy->base + reg);
64 }
65 
66 static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg)
67 {
68 	return readl(phy->base + reg);
69 }
70 
71 static void ralink_usb_phy_init(struct ralink_usb_phy *phy)
72 {
73 	u2_phy_r32(phy, OFS_U2_PHY_AC2);
74 	u2_phy_r32(phy, OFS_U2_PHY_ACR0);
75 	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
76 
77 	u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
78 	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
79 	u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
80 	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
81 	u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
82 	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
83 	u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
84 	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
85 	u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
86 	u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
87 	u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
88 	u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
89 }
90 
91 static int ralink_usb_phy_power_on(struct phy *_phy)
92 {
93 	struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
94 	u32 t;
95 
96 	/* enable the phy */
97 	regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
98 			   phy->clk, phy->clk);
99 
100 	/* setup host mode */
101 	regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
102 			   RT_SYSCFG1_USB0_HOST_MODE,
103 			   RT_SYSCFG1_USB0_HOST_MODE);
104 
105 	/* deassert the reset lines */
106 	reset_control_deassert(phy->rsthost);
107 	reset_control_deassert(phy->rstdev);
108 
109 	/*
110 	 * The SDK kernel had a delay of 100ms. however on device
111 	 * testing showed that 10ms is enough
112 	 */
113 	mdelay(10);
114 
115 	if (phy->base)
116 		ralink_usb_phy_init(phy);
117 
118 	/* print some status info */
119 	regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
120 	dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
121 		(t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
122 	if (t & USB_PHY_UTMI_8B60M)
123 		dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
124 	else
125 		dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
126 
127 	return 0;
128 }
129 
130 static int ralink_usb_phy_power_off(struct phy *_phy)
131 {
132 	struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
133 
134 	/* disable the phy */
135 	regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
136 			   phy->clk, 0);
137 
138 	/* assert the reset lines */
139 	reset_control_assert(phy->rstdev);
140 	reset_control_assert(phy->rsthost);
141 
142 	return 0;
143 }
144 
145 static const struct phy_ops ralink_usb_phy_ops = {
146 	.power_on	= ralink_usb_phy_power_on,
147 	.power_off	= ralink_usb_phy_power_off,
148 	.owner		= THIS_MODULE,
149 };
150 
151 static const struct of_device_id ralink_usb_phy_of_match[] = {
152 	{
153 		.compatible = "ralink,rt3352-usbphy",
154 		.data = (void *)(uintptr_t)(RT_CLKCFG1_UPHY1_CLK_EN |
155 					    RT_CLKCFG1_UPHY0_CLK_EN)
156 	},
157 	{
158 		.compatible = "mediatek,mt7620-usbphy",
159 		.data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
160 					    MT7620_CLKCFG1_UPHY0_CLK_EN)
161 	},
162 	{
163 		.compatible = "mediatek,mt7628-usbphy",
164 		.data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
165 					    MT7620_CLKCFG1_UPHY0_CLK_EN) },
166 	{ },
167 };
168 MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
169 
170 static int ralink_usb_phy_probe(struct platform_device *pdev)
171 {
172 	struct device *dev = &pdev->dev;
173 	struct phy_provider *phy_provider;
174 	const struct of_device_id *match;
175 	struct ralink_usb_phy *phy;
176 
177 	match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
178 	if (!match)
179 		return -ENODEV;
180 
181 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
182 	if (!phy)
183 		return -ENOMEM;
184 
185 	phy->clk = (uintptr_t)match->data;
186 	phy->base = NULL;
187 
188 	phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl");
189 	if (IS_ERR(phy->sysctl)) {
190 		dev_err(dev, "failed to get sysctl registers\n");
191 		return PTR_ERR(phy->sysctl);
192 	}
193 
194 	/* The MT7628 and MT7688 require extra setup of PHY registers. */
195 	if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) {
196 		phy->base = devm_platform_ioremap_resource(pdev, 0);
197 		if (IS_ERR(phy->base)) {
198 			dev_err(dev, "failed to remap register memory\n");
199 			return PTR_ERR(phy->base);
200 		}
201 	}
202 
203 	phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
204 	if (IS_ERR(phy->rsthost)) {
205 		dev_err(dev, "host reset is missing\n");
206 		return PTR_ERR(phy->rsthost);
207 	}
208 
209 	phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
210 	if (IS_ERR(phy->rstdev)) {
211 		dev_err(dev, "device reset is missing\n");
212 		return PTR_ERR(phy->rstdev);
213 	}
214 
215 	phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
216 	if (IS_ERR(phy->phy)) {
217 		dev_err(dev, "failed to create PHY\n");
218 		return PTR_ERR(phy->phy);
219 	}
220 	phy_set_drvdata(phy->phy, phy);
221 
222 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
223 
224 	return PTR_ERR_OR_ZERO(phy_provider);
225 }
226 
227 static struct platform_driver ralink_usb_phy_driver = {
228 	.probe	= ralink_usb_phy_probe,
229 	.driver = {
230 		.of_match_table	= ralink_usb_phy_of_match,
231 		.name  = "ralink-usb-phy",
232 	}
233 };
234 module_platform_driver(ralink_usb_phy_driver);
235 
236 MODULE_DESCRIPTION("Ralink USB phy driver");
237 MODULE_AUTHOR("John Crispin <john@phrozen.org>");
238 MODULE_LICENSE("GPL v2");
239