1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Mediatek MT7621 PCI PHY Driver
4  * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com>
5  */
6 
7 #include <dt-bindings/phy/phy.h>
8 #include <linux/clk.h>
9 #include <linux/bitfield.h>
10 #include <linux/bitops.h>
11 #include <linux/module.h>
12 #include <linux/of_address.h>
13 #include <linux/of_device.h>
14 #include <linux/phy/phy.h>
15 #include <linux/platform_device.h>
16 #include <linux/regmap.h>
17 #include <linux/sys_soc.h>
18 
19 #define RG_PE1_PIPE_REG				0x02c
20 #define RG_PE1_PIPE_RST				BIT(12)
21 #define RG_PE1_PIPE_CMD_FRC			BIT(4)
22 
23 #define RG_P0_TO_P1_WIDTH			0x100
24 #define RG_PE1_H_LCDDS_REG			0x49c
25 #define RG_PE1_H_LCDDS_PCW			GENMASK(30, 0)
26 
27 #define RG_PE1_FRC_H_XTAL_REG			0x400
28 #define RG_PE1_FRC_H_XTAL_TYPE			BIT(8)
29 #define RG_PE1_H_XTAL_TYPE			GENMASK(10, 9)
30 
31 #define RG_PE1_FRC_PHY_REG			0x000
32 #define RG_PE1_FRC_PHY_EN			BIT(4)
33 #define RG_PE1_PHY_EN				BIT(5)
34 
35 #define RG_PE1_H_PLL_REG			0x490
36 #define RG_PE1_H_PLL_BC				GENMASK(23, 22)
37 #define RG_PE1_H_PLL_BP				GENMASK(21, 18)
38 #define RG_PE1_H_PLL_IR				GENMASK(15, 12)
39 #define RG_PE1_H_PLL_IC				GENMASK(11, 8)
40 #define RG_PE1_H_PLL_PREDIV			GENMASK(7, 6)
41 #define RG_PE1_PLL_DIVEN			GENMASK(3, 1)
42 
43 #define RG_PE1_H_PLL_FBKSEL_REG			0x4bc
44 #define RG_PE1_H_PLL_FBKSEL			GENMASK(5, 4)
45 
46 #define	RG_PE1_H_LCDDS_SSC_PRD_REG		0x4a4
47 #define RG_PE1_H_LCDDS_SSC_PRD			GENMASK(15, 0)
48 
49 #define RG_PE1_H_LCDDS_SSC_DELTA_REG		0x4a8
50 #define RG_PE1_H_LCDDS_SSC_DELTA		GENMASK(11, 0)
51 #define RG_PE1_H_LCDDS_SSC_DELTA1		GENMASK(27, 16)
52 
53 #define RG_PE1_LCDDS_CLK_PH_INV_REG		0x4a0
54 #define RG_PE1_LCDDS_CLK_PH_INV			BIT(5)
55 
56 #define RG_PE1_H_PLL_BR_REG			0x4ac
57 #define RG_PE1_H_PLL_BR				GENMASK(18, 16)
58 
59 #define	RG_PE1_MSTCKDIV_REG			0x414
60 #define RG_PE1_MSTCKDIV				GENMASK(7, 6)
61 
62 #define RG_PE1_FRC_MSTCKDIV			BIT(5)
63 
64 #define MAX_PHYS	2
65 
66 /**
67  * struct mt7621_pci_phy - Mt7621 Pcie PHY core
68  * @dev: pointer to device
69  * @regmap: kernel regmap pointer
70  * @phy: pointer to the kernel PHY device
71  * @sys_clk: pointer to the system XTAL clock
72  * @port_base: base register
73  * @has_dual_port: if the phy has dual ports.
74  * @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst'
75  * needs to be executed. Depends on chip revision.
76  */
77 struct mt7621_pci_phy {
78 	struct device *dev;
79 	struct regmap *regmap;
80 	struct phy *phy;
81 	struct clk *sys_clk;
82 	void __iomem *port_base;
83 	bool has_dual_port;
84 	bool bypass_pipe_rst;
85 };
86 
87 static inline void mt7621_phy_rmw(struct mt7621_pci_phy *phy,
88 				  u32 reg, u32 clr, u32 set)
89 {
90 	u32 val;
91 
92 	/*
93 	 * We cannot use 'regmap_write_bits' here because internally
94 	 * 'set' is masked before is set to the value that will be
95 	 * written to the register. That way results in no reliable
96 	 * pci setup. Avoid to mask 'set' before set value to 'val'
97 	 * completely avoid the problem.
98 	 */
99 	regmap_read(phy->regmap, reg, &val);
100 	val &= ~clr;
101 	val |= set;
102 	regmap_write(phy->regmap, reg, val);
103 }
104 
105 static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy)
106 {
107 	mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_RST);
108 	mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_CMD_FRC);
109 
110 	if (phy->has_dual_port) {
111 		mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
112 			       0, RG_PE1_PIPE_RST);
113 		mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
114 			       0, RG_PE1_PIPE_CMD_FRC);
115 	}
116 }
117 
118 static int mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
119 {
120 	struct device *dev = phy->dev;
121 	unsigned long clk_rate;
122 
123 	clk_rate = clk_get_rate(phy->sys_clk);
124 	if (!clk_rate)
125 		return -EINVAL;
126 
127 	/* Set PCIe Port PHY to disable SSC */
128 	/* Debug Xtal Type */
129 	mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG,
130 		       RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE,
131 		       RG_PE1_FRC_H_XTAL_TYPE |
132 		       FIELD_PREP(RG_PE1_H_XTAL_TYPE, 0x00));
133 
134 	/* disable port */
135 	mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG, RG_PE1_PHY_EN,
136 		       RG_PE1_FRC_PHY_EN);
137 
138 	if (phy->has_dual_port) {
139 		mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
140 			       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
141 	}
142 
143 	if (clk_rate == 40000000) { /* 40MHz Xtal */
144 		/* Set Pre-divider ratio (for host mode) */
145 		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
146 			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01));
147 
148 		dev_dbg(dev, "Xtal is 40MHz\n");
149 	} else if (clk_rate == 25000000) { /* 25MHz Xal */
150 		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
151 			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
152 
153 		/* Select feedback clock */
154 		mt7621_phy_rmw(phy, RG_PE1_H_PLL_FBKSEL_REG,
155 			       RG_PE1_H_PLL_FBKSEL,
156 			       FIELD_PREP(RG_PE1_H_PLL_FBKSEL, 0x01));
157 
158 		/* DDS NCPO PCW (for host mode) */
159 		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
160 			       RG_PE1_H_LCDDS_SSC_PRD,
161 			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x00));
162 
163 		/* DDS SSC dither period control */
164 		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
165 			       RG_PE1_H_LCDDS_SSC_PRD,
166 			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x18d));
167 
168 		/* DDS SSC dither amplitude control */
169 		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG,
170 			       RG_PE1_H_LCDDS_SSC_DELTA |
171 			       RG_PE1_H_LCDDS_SSC_DELTA1,
172 			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA, 0x4a) |
173 			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA1, 0x4a));
174 
175 		dev_dbg(dev, "Xtal is 25MHz\n");
176 	} else { /* 20MHz Xtal */
177 		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
178 			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
179 
180 		dev_dbg(dev, "Xtal is 20MHz\n");
181 	}
182 
183 	/* DDS clock inversion */
184 	mt7621_phy_rmw(phy, RG_PE1_LCDDS_CLK_PH_INV_REG,
185 		       RG_PE1_LCDDS_CLK_PH_INV, RG_PE1_LCDDS_CLK_PH_INV);
186 
187 	/* Set PLL bits */
188 	mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
189 		       RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR |
190 		       RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN,
191 		       FIELD_PREP(RG_PE1_H_PLL_BC, 0x02) |
192 		       FIELD_PREP(RG_PE1_H_PLL_BP, 0x06) |
193 		       FIELD_PREP(RG_PE1_H_PLL_IR, 0x02) |
194 		       FIELD_PREP(RG_PE1_H_PLL_IC, 0x01) |
195 		       FIELD_PREP(RG_PE1_PLL_DIVEN, 0x02));
196 
197 	mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR,
198 		       FIELD_PREP(RG_PE1_H_PLL_BR, 0x00));
199 
200 	if (clk_rate == 40000000) { /* 40MHz Xtal */
201 		/* set force mode enable of da_pe1_mstckdiv */
202 		mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG,
203 			       RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV,
204 			       FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) |
205 			       RG_PE1_FRC_MSTCKDIV);
206 	}
207 
208 	return 0;
209 }
210 
211 static int mt7621_pci_phy_init(struct phy *phy)
212 {
213 	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
214 
215 	if (mphy->bypass_pipe_rst)
216 		mt7621_bypass_pipe_rst(mphy);
217 
218 	return mt7621_set_phy_for_ssc(mphy);
219 }
220 
221 static int mt7621_pci_phy_power_on(struct phy *phy)
222 {
223 	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
224 
225 	/* Enable PHY and disable force mode */
226 	mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
227 		       RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
228 
229 	if (mphy->has_dual_port) {
230 		mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
231 			       RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
232 	}
233 
234 	return 0;
235 }
236 
237 static int mt7621_pci_phy_power_off(struct phy *phy)
238 {
239 	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
240 
241 	/* Disable PHY */
242 	mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
243 		       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
244 
245 	if (mphy->has_dual_port) {
246 		mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
247 			       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
248 	}
249 
250 	return 0;
251 }
252 
253 static int mt7621_pci_phy_exit(struct phy *phy)
254 {
255 	return 0;
256 }
257 
258 static const struct phy_ops mt7621_pci_phy_ops = {
259 	.init		= mt7621_pci_phy_init,
260 	.exit		= mt7621_pci_phy_exit,
261 	.power_on	= mt7621_pci_phy_power_on,
262 	.power_off	= mt7621_pci_phy_power_off,
263 	.owner		= THIS_MODULE,
264 };
265 
266 static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev,
267 					    struct of_phandle_args *args)
268 {
269 	struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev);
270 
271 	if (WARN_ON(args->args[0] >= MAX_PHYS))
272 		return ERR_PTR(-ENODEV);
273 
274 	mt7621_phy->has_dual_port = args->args[0];
275 
276 	dev_dbg(dev, "PHY for 0x%px (dual port = %d)\n",
277 		mt7621_phy->port_base, mt7621_phy->has_dual_port);
278 
279 	return mt7621_phy->phy;
280 }
281 
282 static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
283 	{ .soc_id = "mt7621", .revision = "E2" }
284 };
285 
286 static const struct regmap_config mt7621_pci_phy_regmap_config = {
287 	.reg_bits = 32,
288 	.val_bits = 32,
289 	.reg_stride = 4,
290 	.max_register = 0x700,
291 };
292 
293 static int mt7621_pci_phy_probe(struct platform_device *pdev)
294 {
295 	struct device *dev = &pdev->dev;
296 	const struct soc_device_attribute *attr;
297 	struct phy_provider *provider;
298 	struct mt7621_pci_phy *phy;
299 
300 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
301 	if (!phy)
302 		return -ENOMEM;
303 
304 	attr = soc_device_match(mt7621_pci_quirks_match);
305 	if (attr)
306 		phy->bypass_pipe_rst = true;
307 
308 	phy->dev = dev;
309 	platform_set_drvdata(pdev, phy);
310 
311 	phy->port_base = devm_platform_ioremap_resource(pdev, 0);
312 	if (IS_ERR(phy->port_base)) {
313 		dev_err(dev, "failed to remap phy regs\n");
314 		return PTR_ERR(phy->port_base);
315 	}
316 
317 	phy->regmap = devm_regmap_init_mmio(phy->dev, phy->port_base,
318 					    &mt7621_pci_phy_regmap_config);
319 	if (IS_ERR(phy->regmap))
320 		return PTR_ERR(phy->regmap);
321 
322 	phy->phy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops);
323 	if (IS_ERR(phy->phy)) {
324 		dev_err(dev, "failed to create phy\n");
325 		return PTR_ERR(phy->phy);
326 	}
327 
328 	phy->sys_clk = devm_clk_get(dev, NULL);
329 	if (IS_ERR(phy->sys_clk)) {
330 		dev_err(dev, "failed to get phy clock\n");
331 		return PTR_ERR(phy->sys_clk);
332 	}
333 
334 	phy_set_drvdata(phy->phy, phy);
335 
336 	provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate);
337 
338 	return PTR_ERR_OR_ZERO(provider);
339 }
340 
341 static const struct of_device_id mt7621_pci_phy_ids[] = {
342 	{ .compatible = "mediatek,mt7621-pci-phy" },
343 	{},
344 };
345 MODULE_DEVICE_TABLE(of, mt7621_pci_phy_ids);
346 
347 static struct platform_driver mt7621_pci_phy_driver = {
348 	.probe = mt7621_pci_phy_probe,
349 	.driver = {
350 		.name = "mt7621-pci-phy",
351 		.of_match_table = mt7621_pci_phy_ids,
352 	},
353 };
354 
355 builtin_platform_driver(mt7621_pci_phy_driver);
356 
357 MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>");
358 MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver");
359 MODULE_LICENSE("GPL v2");
360