1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Mediatek MT7621 PCI PHY Driver
4  * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com>
5  */
6 
7 #include <dt-bindings/phy/phy.h>
8 #include <linux/bitfield.h>
9 #include <linux/bitops.h>
10 #include <linux/module.h>
11 #include <linux/of_address.h>
12 #include <linux/of_device.h>
13 #include <linux/phy/phy.h>
14 #include <linux/platform_device.h>
15 #include <linux/regmap.h>
16 #include <linux/sys_soc.h>
17 #include <mt7621.h>
18 #include <ralink_regs.h>
19 
20 #define RG_PE1_PIPE_REG				0x02c
21 #define RG_PE1_PIPE_RST				BIT(12)
22 #define RG_PE1_PIPE_CMD_FRC			BIT(4)
23 
24 #define RG_P0_TO_P1_WIDTH			0x100
25 #define RG_PE1_H_LCDDS_REG			0x49c
26 #define RG_PE1_H_LCDDS_PCW			GENMASK(30, 0)
27 
28 #define RG_PE1_FRC_H_XTAL_REG			0x400
29 #define RG_PE1_FRC_H_XTAL_TYPE			BIT(8)
30 #define RG_PE1_H_XTAL_TYPE			GENMASK(10, 9)
31 
32 #define RG_PE1_FRC_PHY_REG			0x000
33 #define RG_PE1_FRC_PHY_EN			BIT(4)
34 #define RG_PE1_PHY_EN				BIT(5)
35 
36 #define RG_PE1_H_PLL_REG			0x490
37 #define RG_PE1_H_PLL_BC				GENMASK(23, 22)
38 #define RG_PE1_H_PLL_BP				GENMASK(21, 18)
39 #define RG_PE1_H_PLL_IR				GENMASK(15, 12)
40 #define RG_PE1_H_PLL_IC				GENMASK(11, 8)
41 #define RG_PE1_H_PLL_PREDIV			GENMASK(7, 6)
42 #define RG_PE1_PLL_DIVEN			GENMASK(3, 1)
43 
44 #define RG_PE1_H_PLL_FBKSEL_REG			0x4bc
45 #define RG_PE1_H_PLL_FBKSEL			GENMASK(5, 4)
46 
47 #define	RG_PE1_H_LCDDS_SSC_PRD_REG		0x4a4
48 #define RG_PE1_H_LCDDS_SSC_PRD			GENMASK(15, 0)
49 
50 #define RG_PE1_H_LCDDS_SSC_DELTA_REG		0x4a8
51 #define RG_PE1_H_LCDDS_SSC_DELTA		GENMASK(11, 0)
52 #define RG_PE1_H_LCDDS_SSC_DELTA1		GENMASK(27, 16)
53 
54 #define RG_PE1_LCDDS_CLK_PH_INV_REG		0x4a0
55 #define RG_PE1_LCDDS_CLK_PH_INV			BIT(5)
56 
57 #define RG_PE1_H_PLL_BR_REG			0x4ac
58 #define RG_PE1_H_PLL_BR				GENMASK(18, 16)
59 
60 #define	RG_PE1_MSTCKDIV_REG			0x414
61 #define RG_PE1_MSTCKDIV				GENMASK(7, 6)
62 
63 #define RG_PE1_FRC_MSTCKDIV			BIT(5)
64 
65 #define XTAL_MASK				GENMASK(7, 6)
66 
67 #define MAX_PHYS	2
68 
69 /**
70  * struct mt7621_pci_phy - Mt7621 Pcie PHY core
71  * @dev: pointer to device
72  * @regmap: kernel regmap pointer
73  * @phy: pointer to the kernel PHY device
74  * @port_base: base register
75  * @has_dual_port: if the phy has dual ports.
76  * @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst'
77  * needs to be executed. Depends on chip revision.
78  */
79 struct mt7621_pci_phy {
80 	struct device *dev;
81 	struct regmap *regmap;
82 	struct phy *phy;
83 	void __iomem *port_base;
84 	bool has_dual_port;
85 	bool bypass_pipe_rst;
86 };
87 
88 static inline void mt7621_phy_rmw(struct mt7621_pci_phy *phy,
89 				  u32 reg, u32 clr, u32 set)
90 {
91 	u32 val;
92 
93 	/*
94 	 * We cannot use 'regmap_write_bits' here because internally
95 	 * 'set' is masked before is set to the value that will be
96 	 * written to the register. That way results in no reliable
97 	 * pci setup. Avoid to mask 'set' before set value to 'val'
98 	 * completely avoid the problem.
99 	 */
100 	regmap_read(phy->regmap, reg, &val);
101 	val &= ~clr;
102 	val |= set;
103 	regmap_write(phy->regmap, reg, val);
104 }
105 
106 static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy)
107 {
108 	mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_RST);
109 	mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_CMD_FRC);
110 
111 	if (phy->has_dual_port) {
112 		mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
113 			       0, RG_PE1_PIPE_RST);
114 		mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
115 			       0, RG_PE1_PIPE_CMD_FRC);
116 	}
117 }
118 
119 static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
120 {
121 	struct device *dev = phy->dev;
122 	u32 xtal_mode;
123 
124 	xtal_mode = FIELD_GET(XTAL_MASK, rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0));
125 
126 	/* Set PCIe Port PHY to disable SSC */
127 	/* Debug Xtal Type */
128 	mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG,
129 		       RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE,
130 		       RG_PE1_FRC_H_XTAL_TYPE |
131 		       FIELD_PREP(RG_PE1_H_XTAL_TYPE, 0x00));
132 
133 	/* disable port */
134 	mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG, RG_PE1_PHY_EN,
135 		       RG_PE1_FRC_PHY_EN);
136 
137 	if (phy->has_dual_port) {
138 		mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
139 			       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
140 	}
141 
142 	if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */
143 		/* Set Pre-divider ratio (for host mode) */
144 		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
145 			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01));
146 
147 		dev_dbg(dev, "Xtal is 40MHz\n");
148 	} else if (xtal_mode >= 6) { /* 25MHz Xal */
149 		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
150 			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
151 
152 		/* Select feedback clock */
153 		mt7621_phy_rmw(phy, RG_PE1_H_PLL_FBKSEL_REG,
154 			       RG_PE1_H_PLL_FBKSEL,
155 			       FIELD_PREP(RG_PE1_H_PLL_FBKSEL, 0x01));
156 
157 		/* DDS NCPO PCW (for host mode) */
158 		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
159 			       RG_PE1_H_LCDDS_SSC_PRD,
160 			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x00));
161 
162 		/* DDS SSC dither period control */
163 		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
164 			       RG_PE1_H_LCDDS_SSC_PRD,
165 			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x18d));
166 
167 		/* DDS SSC dither amplitude control */
168 		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG,
169 			       RG_PE1_H_LCDDS_SSC_DELTA |
170 			       RG_PE1_H_LCDDS_SSC_DELTA1,
171 			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA, 0x4a) |
172 			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA1, 0x4a));
173 
174 		dev_dbg(dev, "Xtal is 25MHz\n");
175 	} else { /* 20MHz Xtal */
176 		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
177 			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
178 
179 		dev_dbg(dev, "Xtal is 20MHz\n");
180 	}
181 
182 	/* DDS clock inversion */
183 	mt7621_phy_rmw(phy, RG_PE1_LCDDS_CLK_PH_INV_REG,
184 		       RG_PE1_LCDDS_CLK_PH_INV, RG_PE1_LCDDS_CLK_PH_INV);
185 
186 	/* Set PLL bits */
187 	mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
188 		       RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR |
189 		       RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN,
190 		       FIELD_PREP(RG_PE1_H_PLL_BC, 0x02) |
191 		       FIELD_PREP(RG_PE1_H_PLL_BP, 0x06) |
192 		       FIELD_PREP(RG_PE1_H_PLL_IR, 0x02) |
193 		       FIELD_PREP(RG_PE1_H_PLL_IC, 0x01) |
194 		       FIELD_PREP(RG_PE1_PLL_DIVEN, 0x02));
195 
196 	mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR,
197 		       FIELD_PREP(RG_PE1_H_PLL_BR, 0x00));
198 
199 	if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */
200 		/* set force mode enable of da_pe1_mstckdiv */
201 		mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG,
202 			       RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV,
203 			       FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) |
204 			       RG_PE1_FRC_MSTCKDIV);
205 	}
206 }
207 
208 static int mt7621_pci_phy_init(struct phy *phy)
209 {
210 	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
211 
212 	if (mphy->bypass_pipe_rst)
213 		mt7621_bypass_pipe_rst(mphy);
214 
215 	mt7621_set_phy_for_ssc(mphy);
216 
217 	return 0;
218 }
219 
220 static int mt7621_pci_phy_power_on(struct phy *phy)
221 {
222 	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
223 
224 	/* Enable PHY and disable force mode */
225 	mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
226 		       RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
227 
228 	if (mphy->has_dual_port) {
229 		mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
230 			       RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
231 	}
232 
233 	return 0;
234 }
235 
236 static int mt7621_pci_phy_power_off(struct phy *phy)
237 {
238 	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
239 
240 	/* Disable PHY */
241 	mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
242 		       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
243 
244 	if (mphy->has_dual_port) {
245 		mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
246 			       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
247 	}
248 
249 	return 0;
250 }
251 
252 static int mt7621_pci_phy_exit(struct phy *phy)
253 {
254 	return 0;
255 }
256 
257 static const struct phy_ops mt7621_pci_phy_ops = {
258 	.init		= mt7621_pci_phy_init,
259 	.exit		= mt7621_pci_phy_exit,
260 	.power_on	= mt7621_pci_phy_power_on,
261 	.power_off	= mt7621_pci_phy_power_off,
262 	.owner		= THIS_MODULE,
263 };
264 
265 static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev,
266 					    struct of_phandle_args *args)
267 {
268 	struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev);
269 
270 	if (WARN_ON(args->args[0] >= MAX_PHYS))
271 		return ERR_PTR(-ENODEV);
272 
273 	mt7621_phy->has_dual_port = args->args[0];
274 
275 	dev_info(dev, "PHY for 0x%08x (dual port = %d)\n",
276 		 (unsigned int)mt7621_phy->port_base, mt7621_phy->has_dual_port);
277 
278 	return mt7621_phy->phy;
279 }
280 
281 static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
282 	{ .soc_id = "mt7621", .revision = "E2" }
283 };
284 
285 static const struct regmap_config mt7621_pci_phy_regmap_config = {
286 	.reg_bits = 32,
287 	.val_bits = 32,
288 	.reg_stride = 4,
289 	.max_register = 0x700,
290 };
291 
292 static int mt7621_pci_phy_probe(struct platform_device *pdev)
293 {
294 	struct device *dev = &pdev->dev;
295 	const struct soc_device_attribute *attr;
296 	struct phy_provider *provider;
297 	struct mt7621_pci_phy *phy;
298 
299 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
300 	if (!phy)
301 		return -ENOMEM;
302 
303 	attr = soc_device_match(mt7621_pci_quirks_match);
304 	if (attr)
305 		phy->bypass_pipe_rst = true;
306 
307 	phy->dev = dev;
308 	platform_set_drvdata(pdev, phy);
309 
310 	phy->port_base = devm_platform_ioremap_resource(pdev, 0);
311 	if (IS_ERR(phy->port_base)) {
312 		dev_err(dev, "failed to remap phy regs\n");
313 		return PTR_ERR(phy->port_base);
314 	}
315 
316 	phy->regmap = devm_regmap_init_mmio(phy->dev, phy->port_base,
317 					    &mt7621_pci_phy_regmap_config);
318 	if (IS_ERR(phy->regmap))
319 		return PTR_ERR(phy->regmap);
320 
321 	phy->phy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops);
322 	if (IS_ERR(phy)) {
323 		dev_err(dev, "failed to create phy\n");
324 		return PTR_ERR(phy);
325 	}
326 
327 	phy_set_drvdata(phy->phy, phy);
328 
329 	provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate);
330 
331 	return PTR_ERR_OR_ZERO(provider);
332 }
333 
334 static const struct of_device_id mt7621_pci_phy_ids[] = {
335 	{ .compatible = "mediatek,mt7621-pci-phy" },
336 	{},
337 };
338 MODULE_DEVICE_TABLE(of, mt7621_pci_phy_ids);
339 
340 static struct platform_driver mt7621_pci_phy_driver = {
341 	.probe = mt7621_pci_phy_probe,
342 	.driver = {
343 		.name = "mt7621-pci-phy",
344 		.of_match_table = of_match_ptr(mt7621_pci_phy_ids),
345 	},
346 };
347 
348 builtin_platform_driver(mt7621_pci_phy_driver);
349 
350 MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>");
351 MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver");
352 MODULE_LICENSE("GPL v2");
353