1 // SPDX-License-Identifier: GPL-2.0-only 2 /** 3 * Copyright (C) 2016 Linaro Ltd 4 */ 5 #include <linux/module.h> 6 #include <linux/ulpi/driver.h> 7 #include <linux/ulpi/regs.h> 8 #include <linux/clk.h> 9 #include <linux/regulator/consumer.h> 10 #include <linux/of_device.h> 11 #include <linux/phy/phy.h> 12 #include <linux/reset.h> 13 #include <linux/extcon.h> 14 #include <linux/notifier.h> 15 16 #define ULPI_PWR_CLK_MNG_REG 0x88 17 # define ULPI_PWR_OTG_COMP_DISABLE BIT(0) 18 19 #define ULPI_MISC_A 0x96 20 # define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) 21 # define ULPI_MISC_A_VBUSVLDEXT BIT(0) 22 23 24 struct ulpi_seq { 25 u8 addr; 26 u8 val; 27 }; 28 29 struct qcom_usb_hs_phy { 30 struct ulpi *ulpi; 31 struct phy *phy; 32 struct clk *ref_clk; 33 struct clk *sleep_clk; 34 struct regulator *v1p8; 35 struct regulator *v3p3; 36 struct reset_control *reset; 37 struct ulpi_seq *init_seq; 38 struct extcon_dev *vbus_edev; 39 struct notifier_block vbus_notify; 40 }; 41 42 static int qcom_usb_hs_phy_set_mode(struct phy *phy, 43 enum phy_mode mode, int submode) 44 { 45 struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy); 46 u8 addr; 47 int ret; 48 49 if (!uphy->vbus_edev) { 50 u8 val = 0; 51 52 switch (mode) { 53 case PHY_MODE_USB_OTG: 54 case PHY_MODE_USB_HOST: 55 val |= ULPI_INT_IDGRD; 56 fallthrough; 57 case PHY_MODE_USB_DEVICE: 58 val |= ULPI_INT_SESS_VALID; 59 default: 60 break; 61 } 62 63 ret = ulpi_write(uphy->ulpi, ULPI_USB_INT_EN_RISE, val); 64 if (ret) 65 return ret; 66 ret = ulpi_write(uphy->ulpi, ULPI_USB_INT_EN_FALL, val); 67 } else { 68 switch (mode) { 69 case PHY_MODE_USB_OTG: 70 case PHY_MODE_USB_DEVICE: 71 addr = ULPI_SET(ULPI_MISC_A); 72 break; 73 case PHY_MODE_USB_HOST: 74 addr = ULPI_CLR(ULPI_MISC_A); 75 break; 76 default: 77 return -EINVAL; 78 } 79 80 ret = ulpi_write(uphy->ulpi, ULPI_SET(ULPI_PWR_CLK_MNG_REG), 81 ULPI_PWR_OTG_COMP_DISABLE); 82 if (ret) 83 return ret; 84 ret = ulpi_write(uphy->ulpi, addr, ULPI_MISC_A_VBUSVLDEXTSEL); 85 } 86 87 return ret; 88 } 89 90 static int 91 qcom_usb_hs_phy_vbus_notifier(struct notifier_block *nb, unsigned long event, 92 void *ptr) 93 { 94 struct qcom_usb_hs_phy *uphy; 95 u8 addr; 96 97 uphy = container_of(nb, struct qcom_usb_hs_phy, vbus_notify); 98 99 if (event) 100 addr = ULPI_SET(ULPI_MISC_A); 101 else 102 addr = ULPI_CLR(ULPI_MISC_A); 103 104 return ulpi_write(uphy->ulpi, addr, ULPI_MISC_A_VBUSVLDEXT); 105 } 106 107 static int qcom_usb_hs_phy_power_on(struct phy *phy) 108 { 109 struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy); 110 struct ulpi *ulpi = uphy->ulpi; 111 const struct ulpi_seq *seq; 112 int ret, state; 113 114 ret = clk_prepare_enable(uphy->ref_clk); 115 if (ret) 116 return ret; 117 118 ret = clk_prepare_enable(uphy->sleep_clk); 119 if (ret) 120 goto err_sleep; 121 122 ret = regulator_set_load(uphy->v1p8, 50000); 123 if (ret < 0) 124 goto err_1p8; 125 126 ret = regulator_enable(uphy->v1p8); 127 if (ret) 128 goto err_1p8; 129 130 ret = regulator_set_voltage_triplet(uphy->v3p3, 3050000, 3300000, 131 3300000); 132 if (ret) 133 goto err_3p3; 134 135 ret = regulator_set_load(uphy->v3p3, 50000); 136 if (ret < 0) 137 goto err_3p3; 138 139 ret = regulator_enable(uphy->v3p3); 140 if (ret) 141 goto err_3p3; 142 143 for (seq = uphy->init_seq; seq->addr; seq++) { 144 ret = ulpi_write(ulpi, ULPI_EXT_VENDOR_SPECIFIC + seq->addr, 145 seq->val); 146 if (ret) 147 goto err_ulpi; 148 } 149 150 if (uphy->reset) { 151 ret = reset_control_reset(uphy->reset); 152 if (ret) 153 goto err_ulpi; 154 } 155 156 if (uphy->vbus_edev) { 157 state = extcon_get_state(uphy->vbus_edev, EXTCON_USB); 158 /* setup initial state */ 159 qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state, 160 uphy->vbus_edev); 161 ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB, 162 &uphy->vbus_notify); 163 if (ret) 164 goto err_ulpi; 165 } 166 167 return 0; 168 err_ulpi: 169 regulator_disable(uphy->v3p3); 170 err_3p3: 171 regulator_disable(uphy->v1p8); 172 err_1p8: 173 clk_disable_unprepare(uphy->sleep_clk); 174 err_sleep: 175 clk_disable_unprepare(uphy->ref_clk); 176 return ret; 177 } 178 179 static int qcom_usb_hs_phy_power_off(struct phy *phy) 180 { 181 struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy); 182 183 if (uphy->vbus_edev) 184 extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB, 185 &uphy->vbus_notify); 186 regulator_disable(uphy->v3p3); 187 regulator_disable(uphy->v1p8); 188 clk_disable_unprepare(uphy->sleep_clk); 189 clk_disable_unprepare(uphy->ref_clk); 190 191 return 0; 192 } 193 194 static const struct phy_ops qcom_usb_hs_phy_ops = { 195 .power_on = qcom_usb_hs_phy_power_on, 196 .power_off = qcom_usb_hs_phy_power_off, 197 .set_mode = qcom_usb_hs_phy_set_mode, 198 .owner = THIS_MODULE, 199 }; 200 201 static int qcom_usb_hs_phy_probe(struct ulpi *ulpi) 202 { 203 struct qcom_usb_hs_phy *uphy; 204 struct phy_provider *p; 205 struct clk *clk; 206 struct regulator *reg; 207 struct reset_control *reset; 208 int size; 209 int ret; 210 211 uphy = devm_kzalloc(&ulpi->dev, sizeof(*uphy), GFP_KERNEL); 212 if (!uphy) 213 return -ENOMEM; 214 ulpi_set_drvdata(ulpi, uphy); 215 uphy->ulpi = ulpi; 216 217 size = of_property_count_u8_elems(ulpi->dev.of_node, "qcom,init-seq"); 218 if (size < 0) 219 size = 0; 220 uphy->init_seq = devm_kmalloc_array(&ulpi->dev, (size / 2) + 1, 221 sizeof(*uphy->init_seq), GFP_KERNEL); 222 if (!uphy->init_seq) 223 return -ENOMEM; 224 ret = of_property_read_u8_array(ulpi->dev.of_node, "qcom,init-seq", 225 (u8 *)uphy->init_seq, size); 226 if (ret && size) 227 return ret; 228 /* NUL terminate */ 229 uphy->init_seq[size / 2].addr = uphy->init_seq[size / 2].val = 0; 230 231 uphy->ref_clk = clk = devm_clk_get(&ulpi->dev, "ref"); 232 if (IS_ERR(clk)) 233 return PTR_ERR(clk); 234 235 uphy->sleep_clk = clk = devm_clk_get(&ulpi->dev, "sleep"); 236 if (IS_ERR(clk)) 237 return PTR_ERR(clk); 238 239 uphy->v1p8 = reg = devm_regulator_get(&ulpi->dev, "v1p8"); 240 if (IS_ERR(reg)) 241 return PTR_ERR(reg); 242 243 uphy->v3p3 = reg = devm_regulator_get(&ulpi->dev, "v3p3"); 244 if (IS_ERR(reg)) 245 return PTR_ERR(reg); 246 247 uphy->reset = reset = devm_reset_control_get(&ulpi->dev, "por"); 248 if (IS_ERR(reset)) { 249 if (PTR_ERR(reset) == -EPROBE_DEFER) 250 return PTR_ERR(reset); 251 uphy->reset = NULL; 252 } 253 254 uphy->phy = devm_phy_create(&ulpi->dev, ulpi->dev.of_node, 255 &qcom_usb_hs_phy_ops); 256 if (IS_ERR(uphy->phy)) 257 return PTR_ERR(uphy->phy); 258 259 uphy->vbus_edev = extcon_get_edev_by_phandle(&ulpi->dev, 0); 260 if (IS_ERR(uphy->vbus_edev)) { 261 if (PTR_ERR(uphy->vbus_edev) != -ENODEV) 262 return PTR_ERR(uphy->vbus_edev); 263 uphy->vbus_edev = NULL; 264 } 265 266 uphy->vbus_notify.notifier_call = qcom_usb_hs_phy_vbus_notifier; 267 phy_set_drvdata(uphy->phy, uphy); 268 269 p = devm_of_phy_provider_register(&ulpi->dev, of_phy_simple_xlate); 270 return PTR_ERR_OR_ZERO(p); 271 } 272 273 static const struct of_device_id qcom_usb_hs_phy_match[] = { 274 { .compatible = "qcom,usb-hs-phy", }, 275 { } 276 }; 277 MODULE_DEVICE_TABLE(of, qcom_usb_hs_phy_match); 278 279 static struct ulpi_driver qcom_usb_hs_phy_driver = { 280 .probe = qcom_usb_hs_phy_probe, 281 .driver = { 282 .name = "qcom_usb_hs_phy", 283 .of_match_table = qcom_usb_hs_phy_match, 284 }, 285 }; 286 module_ulpi_driver(qcom_usb_hs_phy_driver); 287 288 MODULE_DESCRIPTION("Qualcomm USB HS phy"); 289 MODULE_LICENSE("GPL v2"); 290