1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (c) 2017, The Linux Foundation. All rights reserved. 4 */ 5 6 #ifndef QCOM_PHY_QMP_PCS_USB_V5_H_ 7 #define QCOM_PHY_QMP_PCS_USB_V5_H_ 8 9 /* Only for QMP V5 PHY - USB3 have different offsets than V4 */ 10 #define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1 0x000 11 #define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS 0x004 12 #define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x008 13 #define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2 0x00c 14 #define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x010 15 #define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x014 16 #define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x018 17 #define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART 0x01c 18 #define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL 0x020 19 #define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START 0x024 20 #define QPHY_V5_PCS_USB3_LFPS_CONFIG1 0x028 21 #define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME 0x02c 22 #define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME 0x030 23 #define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME 0x034 24 #define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2 0x038 25 #define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x03c 26 #define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x040 27 #define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x044 28 #define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD 0x048 29 #define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY 0x04c 30 #define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH 0x050 31 #define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL 0x054 32 #define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x058 33 #define QPHY_V5_PCS_USB3_TEST_CONTROL 0x05c 34 #define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL 0x060 35 36 #endif 37