1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (c) 2014, The Linux Foundation. All rights reserved.
4  */
5 
6 #include <linux/io.h>
7 #include <linux/iopoll.h>
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <linux/of.h>
11 #include <linux/time.h>
12 #include <linux/delay.h>
13 #include <linux/clk.h>
14 #include <linux/slab.h>
15 #include <linux/platform_device.h>
16 #include <linux/phy/phy.h>
17 
18 /* PHY registers */
19 #define UNIPHY_PLL_REFCLK_CFG		0x000
20 #define UNIPHY_PLL_PWRGEN_CFG		0x014
21 #define UNIPHY_PLL_GLB_CFG		0x020
22 #define UNIPHY_PLL_SDM_CFG0		0x038
23 #define UNIPHY_PLL_SDM_CFG1		0x03C
24 #define UNIPHY_PLL_SDM_CFG2		0x040
25 #define UNIPHY_PLL_SDM_CFG3		0x044
26 #define UNIPHY_PLL_SDM_CFG4		0x048
27 #define UNIPHY_PLL_SSC_CFG0		0x04C
28 #define UNIPHY_PLL_SSC_CFG1		0x050
29 #define UNIPHY_PLL_SSC_CFG2		0x054
30 #define UNIPHY_PLL_SSC_CFG3		0x058
31 #define UNIPHY_PLL_LKDET_CFG0		0x05C
32 #define UNIPHY_PLL_LKDET_CFG1		0x060
33 #define UNIPHY_PLL_LKDET_CFG2		0x064
34 #define UNIPHY_PLL_CAL_CFG0		0x06C
35 #define UNIPHY_PLL_CAL_CFG8		0x08C
36 #define UNIPHY_PLL_CAL_CFG9		0x090
37 #define UNIPHY_PLL_CAL_CFG10		0x094
38 #define UNIPHY_PLL_CAL_CFG11		0x098
39 #define UNIPHY_PLL_STATUS		0x0C0
40 
41 #define SATA_PHY_SER_CTRL		0x100
42 #define SATA_PHY_TX_DRIV_CTRL0		0x104
43 #define SATA_PHY_TX_DRIV_CTRL1		0x108
44 #define SATA_PHY_TX_IMCAL0		0x11C
45 #define SATA_PHY_TX_IMCAL2		0x124
46 #define SATA_PHY_RX_IMCAL0		0x128
47 #define SATA_PHY_EQUAL			0x13C
48 #define SATA_PHY_OOB_TERM		0x144
49 #define SATA_PHY_CDR_CTRL0		0x148
50 #define SATA_PHY_CDR_CTRL1		0x14C
51 #define SATA_PHY_CDR_CTRL2		0x150
52 #define SATA_PHY_CDR_CTRL3		0x154
53 #define SATA_PHY_PI_CTRL0		0x168
54 #define SATA_PHY_POW_DWN_CTRL0		0x180
55 #define SATA_PHY_POW_DWN_CTRL1		0x184
56 #define SATA_PHY_TX_DATA_CTRL		0x188
57 #define SATA_PHY_ALIGNP			0x1A4
58 #define SATA_PHY_TX_IMCAL_STAT		0x1E4
59 #define SATA_PHY_RX_IMCAL_STAT		0x1E8
60 
61 #define UNIPHY_PLL_LOCK		BIT(0)
62 #define SATA_PHY_TX_CAL		BIT(0)
63 #define SATA_PHY_RX_CAL		BIT(0)
64 
65 /* default timeout set to 1 sec */
66 #define TIMEOUT_MS		10000
67 #define DELAY_INTERVAL_US	100
68 
69 struct qcom_apq8064_sata_phy {
70 	void __iomem *mmio;
71 	struct clk *cfg_clk;
72 	struct device *dev;
73 };
74 
75 /* Helper function to do poll and timeout */
76 static int poll_timeout(void __iomem *addr, u32 mask)
77 {
78 	u32 val;
79 
80 	return readl_relaxed_poll_timeout(addr, val, (val & mask),
81 					DELAY_INTERVAL_US, TIMEOUT_MS * 1000);
82 }
83 
84 static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
85 {
86 	struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
87 	void __iomem *base = phy->mmio;
88 	int ret = 0;
89 
90 	/* SATA phy initialization */
91 	writel_relaxed(0x01, base + SATA_PHY_SER_CTRL);
92 	writel_relaxed(0xB1, base + SATA_PHY_POW_DWN_CTRL0);
93 	/* Make sure the power down happens before power up */
94 	mb();
95 	usleep_range(10, 60);
96 
97 	writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
98 	writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
99 	writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
100 	writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
101 	writel_relaxed(0x02, base + SATA_PHY_TX_IMCAL2);
102 
103 	/* Write UNIPHYPLL registers to configure PLL */
104 	writel_relaxed(0x04, base + UNIPHY_PLL_REFCLK_CFG);
105 	writel_relaxed(0x00, base + UNIPHY_PLL_PWRGEN_CFG);
106 
107 	writel_relaxed(0x0A, base + UNIPHY_PLL_CAL_CFG0);
108 	writel_relaxed(0xF3, base + UNIPHY_PLL_CAL_CFG8);
109 	writel_relaxed(0x01, base + UNIPHY_PLL_CAL_CFG9);
110 	writel_relaxed(0xED, base + UNIPHY_PLL_CAL_CFG10);
111 	writel_relaxed(0x02, base + UNIPHY_PLL_CAL_CFG11);
112 
113 	writel_relaxed(0x36, base + UNIPHY_PLL_SDM_CFG0);
114 	writel_relaxed(0x0D, base + UNIPHY_PLL_SDM_CFG1);
115 	writel_relaxed(0xA3, base + UNIPHY_PLL_SDM_CFG2);
116 	writel_relaxed(0xF0, base + UNIPHY_PLL_SDM_CFG3);
117 	writel_relaxed(0x00, base + UNIPHY_PLL_SDM_CFG4);
118 
119 	writel_relaxed(0x19, base + UNIPHY_PLL_SSC_CFG0);
120 	writel_relaxed(0xE1, base + UNIPHY_PLL_SSC_CFG1);
121 	writel_relaxed(0x00, base + UNIPHY_PLL_SSC_CFG2);
122 	writel_relaxed(0x11, base + UNIPHY_PLL_SSC_CFG3);
123 
124 	writel_relaxed(0x04, base + UNIPHY_PLL_LKDET_CFG0);
125 	writel_relaxed(0xFF, base + UNIPHY_PLL_LKDET_CFG1);
126 
127 	writel_relaxed(0x02, base + UNIPHY_PLL_GLB_CFG);
128 	/* make sure global config LDO power down happens before power up */
129 	mb();
130 
131 	writel_relaxed(0x03, base + UNIPHY_PLL_GLB_CFG);
132 	writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2);
133 
134 	/* PLL Lock wait */
135 	ret = poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
136 	if (ret) {
137 		dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n");
138 		return ret;
139 	}
140 
141 	/* TX Calibration */
142 	ret = poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
143 	if (ret) {
144 		dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n");
145 		return ret;
146 	}
147 
148 	/* RX Calibration */
149 	ret = poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
150 	if (ret) {
151 		dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n");
152 		return ret;
153 	}
154 
155 	/* SATA phy calibrated successfully, power up to functional mode */
156 	writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
157 	writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
158 	writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
159 
160 	writel_relaxed(0x00, base + SATA_PHY_POW_DWN_CTRL1);
161 	writel_relaxed(0x59, base + SATA_PHY_CDR_CTRL0);
162 	writel_relaxed(0x04, base + SATA_PHY_CDR_CTRL1);
163 	writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL2);
164 	writel_relaxed(0x00, base + SATA_PHY_PI_CTRL0);
165 	writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL3);
166 	writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
167 
168 	writel_relaxed(0x11, base + SATA_PHY_TX_DATA_CTRL);
169 	writel_relaxed(0x43, base + SATA_PHY_ALIGNP);
170 	writel_relaxed(0x04, base + SATA_PHY_OOB_TERM);
171 
172 	writel_relaxed(0x01, base + SATA_PHY_EQUAL);
173 	writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL0);
174 	writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL1);
175 
176 	return 0;
177 }
178 
179 static int qcom_apq8064_sata_phy_exit(struct phy *generic_phy)
180 {
181 	struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
182 	void __iomem *base = phy->mmio;
183 
184 	/* Power down PHY */
185 	writel_relaxed(0xF8, base + SATA_PHY_POW_DWN_CTRL0);
186 	writel_relaxed(0xFE, base + SATA_PHY_POW_DWN_CTRL1);
187 
188 	/* Power down PLL block */
189 	writel_relaxed(0x00, base + UNIPHY_PLL_GLB_CFG);
190 
191 	return 0;
192 }
193 
194 static const struct phy_ops qcom_apq8064_sata_phy_ops = {
195 	.init		= qcom_apq8064_sata_phy_init,
196 	.exit		= qcom_apq8064_sata_phy_exit,
197 	.owner		= THIS_MODULE,
198 };
199 
200 static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
201 {
202 	struct qcom_apq8064_sata_phy *phy;
203 	struct device *dev = &pdev->dev;
204 	struct phy_provider *phy_provider;
205 	struct phy *generic_phy;
206 	int ret;
207 
208 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
209 	if (!phy)
210 		return -ENOMEM;
211 
212 	phy->mmio = devm_platform_ioremap_resource(pdev, 0);
213 	if (IS_ERR(phy->mmio))
214 		return PTR_ERR(phy->mmio);
215 
216 	generic_phy = devm_phy_create(dev, NULL, &qcom_apq8064_sata_phy_ops);
217 	if (IS_ERR(generic_phy)) {
218 		dev_err(dev, "%s: failed to create phy\n", __func__);
219 		return PTR_ERR(generic_phy);
220 	}
221 
222 	phy->dev = dev;
223 	phy_set_drvdata(generic_phy, phy);
224 	platform_set_drvdata(pdev, phy);
225 
226 	phy->cfg_clk = devm_clk_get(dev, "cfg");
227 	if (IS_ERR(phy->cfg_clk)) {
228 		dev_err(dev, "Failed to get sata cfg clock\n");
229 		return PTR_ERR(phy->cfg_clk);
230 	}
231 
232 	ret = clk_prepare_enable(phy->cfg_clk);
233 	if (ret)
234 		return ret;
235 
236 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
237 	if (IS_ERR(phy_provider)) {
238 		clk_disable_unprepare(phy->cfg_clk);
239 		dev_err(dev, "%s: failed to register phy\n", __func__);
240 		return PTR_ERR(phy_provider);
241 	}
242 
243 	return 0;
244 }
245 
246 static void qcom_apq8064_sata_phy_remove(struct platform_device *pdev)
247 {
248 	struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev);
249 
250 	clk_disable_unprepare(phy->cfg_clk);
251 }
252 
253 static const struct of_device_id qcom_apq8064_sata_phy_of_match[] = {
254 	{ .compatible = "qcom,apq8064-sata-phy" },
255 	{ },
256 };
257 MODULE_DEVICE_TABLE(of, qcom_apq8064_sata_phy_of_match);
258 
259 static struct platform_driver qcom_apq8064_sata_phy_driver = {
260 	.probe	= qcom_apq8064_sata_phy_probe,
261 	.remove_new = qcom_apq8064_sata_phy_remove,
262 	.driver = {
263 		.name	= "qcom-apq8064-sata-phy",
264 		.of_match_table	= qcom_apq8064_sata_phy_of_match,
265 	}
266 };
267 module_platform_driver(qcom_apq8064_sata_phy_driver);
268 
269 MODULE_DESCRIPTION("QCOM apq8064 SATA PHY driver");
270 MODULE_LICENSE("GPL v2");
271