1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Phy drivers for Qualcomm and Atheros platforms 4# 5config PHY_ATH79_USB 6 tristate "Atheros AR71XX/9XXX USB PHY driver" 7 depends on OF && (ATH79 || COMPILE_TEST) 8 default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM 9 select RESET_CONTROLLER 10 select GENERIC_PHY 11 help 12 Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs. 13 14config PHY_QCOM_APQ8064_SATA 15 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" 16 depends on ARCH_QCOM 17 depends on HAS_IOMEM 18 depends on OF 19 select GENERIC_PHY 20 21config PHY_QCOM_IPQ4019_USB 22 tristate "Qualcomm IPQ4019 USB PHY driver" 23 depends on OF && (ARCH_QCOM || COMPILE_TEST) 24 select GENERIC_PHY 25 help 26 Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. 27 28config PHY_QCOM_IPQ806X_SATA 29 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" 30 depends on ARCH_QCOM 31 depends on HAS_IOMEM 32 depends on OF 33 select GENERIC_PHY 34 35config PHY_QCOM_PCIE2 36 tristate "Qualcomm PCIe Gen2 PHY Driver" 37 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) 38 select GENERIC_PHY 39 help 40 Enable this to support the Qualcomm PCIe PHY, used with the Synopsys 41 based PCIe controller. 42 43config PHY_QCOM_QMP 44 tristate "Qualcomm QMP PHY Driver" 45 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) 46 select GENERIC_PHY 47 help 48 Enable this to support the QMP PHY transceiver that is used 49 with controllers such as PCIe, UFS, and USB on Qualcomm chips. 50 51config PHY_QCOM_QUSB2 52 tristate "Qualcomm QUSB2 PHY Driver" 53 depends on OF && (ARCH_QCOM || COMPILE_TEST) 54 depends on NVMEM || !NVMEM 55 select GENERIC_PHY 56 help 57 Enable this to support the HighSpeed QUSB2 PHY transceiver for USB 58 controllers on Qualcomm chips. This driver supports the high-speed 59 PHY which is usually paired with either the ChipIdea or Synopsys DWC3 60 USB IPs on MSM SOCs. 61 62config PHY_QCOM_USB_HS 63 tristate "Qualcomm USB HS PHY module" 64 depends on USB_ULPI_BUS 65 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 66 select GENERIC_PHY 67 help 68 Support for the USB high-speed ULPI compliant phy on Qualcomm 69 chipsets. 70 71config PHY_QCOM_USB_SNPS_FEMTO_V2 72 tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" 73 depends on OF && (ARCH_QCOM || COMPILE_TEST) 74 select GENERIC_PHY 75 help 76 Enable support for the USB high-speed SNPS Femto phy on Qualcomm 77 chipsets. This PHY has differences in the register map compared 78 to the V1 variants. The PHY is paired with a Synopsys DWC3 USB 79 controller on Qualcomm SOCs. 80 81config PHY_QCOM_USB_HSIC 82 tristate "Qualcomm USB HSIC ULPI PHY module" 83 depends on USB_ULPI_BUS 84 select GENERIC_PHY 85 help 86 Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. 87 88config PHY_QCOM_USB_HS_28NM 89 tristate "Qualcomm 28nm High-Speed PHY" 90 depends on ARCH_QCOM || COMPILE_TEST 91 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 92 select GENERIC_PHY 93 help 94 Enable this to support the Qualcomm Synopsys DesignWare Core 28nm 95 High-Speed PHY driver. This driver supports the Hi-Speed PHY which 96 is usually paired with either the ChipIdea or Synopsys DWC3 USB 97 IPs on MSM SOCs. 98 99config PHY_QCOM_USB_SS 100 tristate "Qualcomm USB Super-Speed PHY driver" 101 depends on ARCH_QCOM || COMPILE_TEST 102 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 103 select GENERIC_PHY 104 help 105 Enable this to support the Super-Speed USB transceiver on various 106 Qualcomm chipsets. 107 108config PHY_QCOM_IPQ806X_USB 109 tristate "Qualcomm IPQ806x DWC3 USB PHY driver" 110 depends on HAS_IOMEM 111 depends on OF && (ARCH_QCOM || COMPILE_TEST) 112 select GENERIC_PHY 113 help 114 This option enables support for the Synopsis PHYs present inside the 115 Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports 116 both HS and SS PHY controllers. 117