1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Phy drivers for Qualcomm and Atheros platforms 4# 5config PHY_ATH79_USB 6 tristate "Atheros AR71XX/9XXX USB PHY driver" 7 depends on OF && (ATH79 || COMPILE_TEST) 8 default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM 9 select RESET_CONTROLLER 10 select GENERIC_PHY 11 help 12 Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs. 13 14config PHY_QCOM_APQ8064_SATA 15 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" 16 depends on ARCH_QCOM 17 depends on HAS_IOMEM 18 depends on OF 19 select GENERIC_PHY 20 21config PHY_QCOM_EDP 22 tristate "Qualcomm eDP PHY driver" 23 depends on ARCH_QCOM || COMPILE_TEST 24 depends on OF 25 depends on COMMON_CLK 26 select GENERIC_PHY 27 help 28 Enable this driver to support the Qualcomm eDP PHY found in various 29 Qualcomm chipsets. 30 31config PHY_QCOM_IPQ4019_USB 32 tristate "Qualcomm IPQ4019 USB PHY driver" 33 depends on OF && (ARCH_QCOM || COMPILE_TEST) 34 select GENERIC_PHY 35 help 36 Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. 37 38config PHY_QCOM_IPQ806X_SATA 39 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" 40 depends on ARCH_QCOM 41 depends on HAS_IOMEM 42 depends on OF 43 select GENERIC_PHY 44 45config PHY_QCOM_PCIE2 46 tristate "Qualcomm PCIe Gen2 PHY Driver" 47 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) 48 select GENERIC_PHY 49 help 50 Enable this to support the Qualcomm PCIe PHY, used with the Synopsys 51 based PCIe controller. 52 53menuconfig PHY_QCOM_QMP 54 tristate "Qualcomm QMP PHY Drivers" 55 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) 56 57if PHY_QCOM_QMP 58 59config PHY_QCOM_QMP_COMBO 60 tristate "Qualcomm QMP Combo PHY Driver" 61 default PHY_QCOM_QMP 62 depends on TYPEC || TYPEC=n 63 depends on DRM || DRM=n 64 select GENERIC_PHY 65 select MFD_SYSCON 66 select DRM_PANEL_BRIDGE if DRM 67 help 68 Enable this to support the QMP Combo PHY transceiver that is used 69 with USB3 and DisplayPort controllers on Qualcomm chips. 70 71config PHY_QCOM_QMP_PCIE 72 tristate "Qualcomm QMP PCIe PHY Driver" 73 depends on PCI || COMPILE_TEST 74 select GENERIC_PHY 75 default PHY_QCOM_QMP 76 help 77 Enable this to support the QMP PCIe PHY transceiver that is used 78 with PCIe controllers on Qualcomm chips. 79 80config PHY_QCOM_QMP_PCIE_8996 81 tristate "Qualcomm QMP PCIe 8996 PHY Driver" 82 depends on PCI || COMPILE_TEST 83 select GENERIC_PHY 84 default PHY_QCOM_QMP 85 help 86 Enable this to support the QMP PCIe PHY transceiver that is used 87 with PCIe controllers on Qualcomm msm8996 chips. 88 89config PHY_QCOM_QMP_UFS 90 tristate "Qualcomm QMP UFS PHY Driver" 91 select GENERIC_PHY 92 default PHY_QCOM_QMP 93 help 94 Enable this to support the QMP UFS PHY transceiver that is used 95 with UFS controllers on Qualcomm chips. 96 97config PHY_QCOM_QMP_USB 98 tristate "Qualcomm QMP USB PHY Driver" 99 select GENERIC_PHY 100 default PHY_QCOM_QMP 101 help 102 Enable this to support the QMP USB PHY transceiver that is used 103 with USB3 controllers on Qualcomm chips. 104 105endif # PHY_QCOM_QMP 106 107config PHY_QCOM_QUSB2 108 tristate "Qualcomm QUSB2 PHY Driver" 109 depends on OF && (ARCH_QCOM || COMPILE_TEST) 110 depends on NVMEM || !NVMEM 111 select GENERIC_PHY 112 help 113 Enable this to support the HighSpeed QUSB2 PHY transceiver for USB 114 controllers on Qualcomm chips. This driver supports the high-speed 115 PHY which is usually paired with either the ChipIdea or Synopsys DWC3 116 USB IPs on MSM SOCs. 117 118config PHY_QCOM_SNPS_EUSB2 119 tristate "Qualcomm SNPS eUSB2 PHY Driver" 120 depends on OF && (ARCH_QCOM || COMPILE_TEST) 121 select GENERIC_PHY 122 help 123 Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm 124 chipsets. The PHY is paired with a Synopsys DWC3 USB controller 125 on Qualcomm SOCs. 126 127config PHY_QCOM_EUSB2_REPEATER 128 tristate "Qualcomm SNPS eUSB2 Repeater Driver" 129 depends on OF && (ARCH_QCOM || COMPILE_TEST) 130 select GENERIC_PHY 131 help 132 Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm 133 PMICs. The repeater is paired with a Synopsys eUSB2 Phy 134 on Qualcomm SOCs. 135 136config PHY_QCOM_USB_HS 137 tristate "Qualcomm USB HS PHY module" 138 depends on USB_ULPI_BUS 139 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 140 select GENERIC_PHY 141 help 142 Support for the USB high-speed ULPI compliant phy on Qualcomm 143 chipsets. 144 145config PHY_QCOM_USB_SNPS_FEMTO_V2 146 tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" 147 depends on OF && (ARCH_QCOM || COMPILE_TEST) 148 select GENERIC_PHY 149 help 150 Enable support for the USB high-speed SNPS Femto phy on Qualcomm 151 chipsets. This PHY has differences in the register map compared 152 to the V1 variants. The PHY is paired with a Synopsys DWC3 USB 153 controller on Qualcomm SOCs. 154 155config PHY_QCOM_USB_HSIC 156 tristate "Qualcomm USB HSIC ULPI PHY module" 157 depends on USB_ULPI_BUS 158 select GENERIC_PHY 159 help 160 Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. 161 162config PHY_QCOM_USB_HS_28NM 163 tristate "Qualcomm 28nm High-Speed PHY" 164 depends on OF && (ARCH_QCOM || COMPILE_TEST) 165 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 166 select GENERIC_PHY 167 help 168 Enable this to support the Qualcomm Synopsys DesignWare Core 28nm 169 High-Speed PHY driver. This driver supports the Hi-Speed PHY which 170 is usually paired with either the ChipIdea or Synopsys DWC3 USB 171 IPs on MSM SOCs. 172 173config PHY_QCOM_USB_SS 174 tristate "Qualcomm USB Super-Speed PHY driver" 175 depends on OF && (ARCH_QCOM || COMPILE_TEST) 176 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 177 select GENERIC_PHY 178 help 179 Enable this to support the Super-Speed USB transceiver on various 180 Qualcomm chipsets. 181 182config PHY_QCOM_IPQ806X_USB 183 tristate "Qualcomm IPQ806x DWC3 USB PHY driver" 184 depends on HAS_IOMEM 185 depends on OF && (ARCH_QCOM || COMPILE_TEST) 186 select GENERIC_PHY 187 help 188 This option enables support for the Synopsis PHYs present inside the 189 Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports 190 both HS and SS PHY controllers. 191 192config PHY_QCOM_SGMII_ETH 193 tristate "Qualcomm DWMAC SGMII SerDes/PHY driver" 194 depends on OF && (ARCH_QCOM || COMPILE_TEST) 195 depends on HAS_IOMEM 196 select GENERIC_PHY 197 help 198 Enable this to support the internal SerDes/SGMII PHY on various 199 Qualcomm chipsets. 200