1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (C) 2013 NVIDIA Corporation 4 * Copyright (C) 2018 Cadence Design Systems Inc. 5 */ 6 7 #include <linux/errno.h> 8 #include <linux/export.h> 9 #include <linux/kernel.h> 10 #include <linux/time64.h> 11 12 #include <linux/phy/phy.h> 13 #include <linux/phy/phy-mipi-dphy.h> 14 15 /* 16 * Minimum D-PHY timings based on MIPI D-PHY specification. Derived 17 * from the valid ranges specified in Section 6.9, Table 14, Page 41 18 * of the D-PHY specification (v2.1). 19 */ 20 int phy_mipi_dphy_get_default_config(unsigned long pixel_clock, 21 unsigned int bpp, 22 unsigned int lanes, 23 struct phy_configure_opts_mipi_dphy *cfg) 24 { 25 unsigned long long hs_clk_rate; 26 unsigned long long ui; 27 28 if (!cfg) 29 return -EINVAL; 30 31 hs_clk_rate = pixel_clock * bpp; 32 do_div(hs_clk_rate, lanes); 33 34 ui = ALIGN(PSEC_PER_SEC, hs_clk_rate); 35 do_div(ui, hs_clk_rate); 36 37 cfg->clk_miss = 0; 38 cfg->clk_post = 60000 + 52 * ui; 39 cfg->clk_pre = 8000; 40 cfg->clk_prepare = 38000; 41 cfg->clk_settle = 95000; 42 cfg->clk_term_en = 0; 43 cfg->clk_trail = 60000; 44 cfg->clk_zero = 262000; 45 cfg->d_term_en = 0; 46 cfg->eot = 0; 47 cfg->hs_exit = 100000; 48 cfg->hs_prepare = 40000 + 4 * ui; 49 cfg->hs_zero = 105000 + 6 * ui; 50 cfg->hs_settle = 85000 + 6 * ui; 51 cfg->hs_skip = 40000; 52 53 /* 54 * The MIPI D-PHY specification (Section 6.9, v1.2, Table 14, Page 40) 55 * contains this formula as: 56 * 57 * T_HS-TRAIL = max(n * 8 * ui, 60 + n * 4 * ui) 58 * 59 * where n = 1 for forward-direction HS mode and n = 4 for reverse- 60 * direction HS mode. There's only one setting and this function does 61 * not parameterize on anything other that ui, so this code will 62 * assumes that reverse-direction HS mode is supported and uses n = 4. 63 */ 64 cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui); 65 66 cfg->init = 100; 67 cfg->lpx = 60000; 68 cfg->ta_get = 5 * cfg->lpx; 69 cfg->ta_go = 4 * cfg->lpx; 70 cfg->ta_sure = 2 * cfg->lpx; 71 cfg->wakeup = 1000; 72 73 cfg->hs_clk_rate = hs_clk_rate; 74 cfg->lanes = lanes; 75 76 return 0; 77 } 78 EXPORT_SYMBOL(phy_mipi_dphy_get_default_config); 79 80 /* 81 * Validate D-PHY configuration according to MIPI D-PHY specification 82 * (v1.2, Section Section 6.9 "Global Operation Timing Parameters"). 83 */ 84 int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg) 85 { 86 unsigned long long ui; 87 88 if (!cfg) 89 return -EINVAL; 90 91 ui = ALIGN(PSEC_PER_SEC, cfg->hs_clk_rate); 92 do_div(ui, cfg->hs_clk_rate); 93 94 if (cfg->clk_miss > 60000) 95 return -EINVAL; 96 97 if (cfg->clk_post < (60000 + 52 * ui)) 98 return -EINVAL; 99 100 if (cfg->clk_pre < 8000) 101 return -EINVAL; 102 103 if (cfg->clk_prepare < 38000 || cfg->clk_prepare > 95000) 104 return -EINVAL; 105 106 if (cfg->clk_settle < 95000 || cfg->clk_settle > 300000) 107 return -EINVAL; 108 109 if (cfg->clk_term_en > 38000) 110 return -EINVAL; 111 112 if (cfg->clk_trail < 60000) 113 return -EINVAL; 114 115 if ((cfg->clk_prepare + cfg->clk_zero) < 300000) 116 return -EINVAL; 117 118 if (cfg->d_term_en > (35000 + 4 * ui)) 119 return -EINVAL; 120 121 if (cfg->eot > (105000 + 12 * ui)) 122 return -EINVAL; 123 124 if (cfg->hs_exit < 100000) 125 return -EINVAL; 126 127 if (cfg->hs_prepare < (40000 + 4 * ui) || 128 cfg->hs_prepare > (85000 + 6 * ui)) 129 return -EINVAL; 130 131 if ((cfg->hs_prepare + cfg->hs_zero) < (145000 + 10 * ui)) 132 return -EINVAL; 133 134 if ((cfg->hs_settle < (85000 + 6 * ui)) || 135 (cfg->hs_settle > (145000 + 10 * ui))) 136 return -EINVAL; 137 138 if (cfg->hs_skip < 40000 || cfg->hs_skip > (55000 + 4 * ui)) 139 return -EINVAL; 140 141 if (cfg->hs_trail < max(8 * ui, 60000 + 4 * ui)) 142 return -EINVAL; 143 144 if (cfg->init < 100) 145 return -EINVAL; 146 147 if (cfg->lpx < 50000) 148 return -EINVAL; 149 150 if (cfg->ta_get != (5 * cfg->lpx)) 151 return -EINVAL; 152 153 if (cfg->ta_go != (4 * cfg->lpx)) 154 return -EINVAL; 155 156 if (cfg->ta_sure < cfg->lpx || cfg->ta_sure > (2 * cfg->lpx)) 157 return -EINVAL; 158 159 if (cfg->wakeup < 1000) 160 return -EINVAL; 161 162 return 0; 163 } 164 EXPORT_SYMBOL(phy_mipi_dphy_config_validate); 165