1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2011 Marvell International Ltd. All rights reserved. 4 * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk> 5 */ 6 7 #include <linux/delay.h> 8 #include <linux/io.h> 9 #include <linux/module.h> 10 #include <linux/phy/phy.h> 11 #include <linux/platform_device.h> 12 #include <linux/soc/mmp/cputype.h> 13 14 #define USB2_PLL_REG0 0x4 15 #define USB2_PLL_REG1 0x8 16 #define USB2_TX_REG0 0x10 17 #define USB2_TX_REG1 0x14 18 #define USB2_TX_REG2 0x18 19 #define USB2_RX_REG0 0x20 20 #define USB2_RX_REG1 0x24 21 #define USB2_RX_REG2 0x28 22 #define USB2_ANA_REG0 0x30 23 #define USB2_ANA_REG1 0x34 24 #define USB2_ANA_REG2 0x38 25 #define USB2_DIG_REG0 0x3C 26 #define USB2_DIG_REG1 0x40 27 #define USB2_DIG_REG2 0x44 28 #define USB2_DIG_REG3 0x48 29 #define USB2_TEST_REG0 0x4C 30 #define USB2_TEST_REG1 0x50 31 #define USB2_TEST_REG2 0x54 32 #define USB2_CHARGER_REG0 0x58 33 #define USB2_OTG_REG0 0x5C 34 #define USB2_PHY_MON0 0x60 35 #define USB2_RESETVE_REG0 0x64 36 #define USB2_ICID_REG0 0x78 37 #define USB2_ICID_REG1 0x7C 38 39 /* USB2_PLL_REG0 */ 40 41 /* This is for Ax stepping */ 42 #define USB2_PLL_FBDIV_SHIFT_MMP3 0 43 #define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0) 44 45 #define USB2_PLL_REFDIV_SHIFT_MMP3 8 46 #define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8) 47 48 #define USB2_PLL_VDD12_SHIFT_MMP3 12 49 #define USB2_PLL_VDD18_SHIFT_MMP3 14 50 51 /* This is for B0 stepping */ 52 #define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0 53 #define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9 54 #define USB2_PLL_VDD18_SHIFT_MMP3_B0 14 55 #define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF 56 #define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00 57 58 #define USB2_PLL_CAL12_SHIFT_MMP3 0 59 #define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0) 60 61 #define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2 62 63 #define USB2_PLL_KVCO_SHIFT_MMP3 4 64 #define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4) 65 66 #define USB2_PLL_ICP_SHIFT_MMP3 8 67 #define USB2_PLL_ICP_MASK_MMP3 (0x7<<8) 68 69 #define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12 70 71 #define USB2_PLL_PU_PLL_SHIFT_MMP3 13 72 #define USB2_PLL_PU_PLL_MASK (0x1 << 13) 73 74 #define USB2_PLL_READY_MASK_MMP3 (0x1 << 15) 75 76 /* USB2_TX_REG0 */ 77 #define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8 78 #define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8) 79 80 #define USB2_TX_RCAL_START_SHIFT_MMP3 13 81 82 /* USB2_TX_REG1 */ 83 #define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0 84 #define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0) 85 86 #define USB2_TX_AMP_SHIFT_MMP3 4 87 #define USB2_TX_AMP_MASK_MMP3 (0x7 << 4) 88 89 #define USB2_TX_VDD12_SHIFT_MMP3 8 90 #define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8) 91 92 /* USB2_TX_REG2 */ 93 #define USB2_TX_DRV_SLEWRATE_SHIFT 10 94 95 /* USB2_RX_REG0 */ 96 #define USB2_RX_SQ_THRESH_SHIFT_MMP3 4 97 #define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4) 98 99 #define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10 100 #define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10) 101 102 /* USB2_ANA_REG1*/ 103 #define USB2_ANA_PU_ANA_SHIFT_MMP3 14 104 105 /* USB2_OTG_REG0 */ 106 #define USB2_OTG_PU_OTG_SHIFT_MMP3 3 107 108 struct mmp3_usb_phy { 109 struct phy *phy; 110 void __iomem *base; 111 }; 112 113 static unsigned int u2o_get(void __iomem *base, unsigned int offset) 114 { 115 return readl_relaxed(base + offset); 116 } 117 118 static void u2o_set(void __iomem *base, unsigned int offset, 119 unsigned int value) 120 { 121 u32 reg; 122 123 reg = readl_relaxed(base + offset); 124 reg |= value; 125 writel_relaxed(reg, base + offset); 126 readl_relaxed(base + offset); 127 } 128 129 static void u2o_clear(void __iomem *base, unsigned int offset, 130 unsigned int value) 131 { 132 u32 reg; 133 134 reg = readl_relaxed(base + offset); 135 reg &= ~value; 136 writel_relaxed(reg, base + offset); 137 readl_relaxed(base + offset); 138 } 139 140 static int mmp3_usb_phy_init(struct phy *phy) 141 { 142 struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy); 143 void __iomem *base = mmp3_usb_phy->base; 144 145 if (cpu_is_mmp3_a0()) { 146 u2o_clear(base, USB2_PLL_REG0, (USB2_PLL_FBDIV_MASK_MMP3 147 | USB2_PLL_REFDIV_MASK_MMP3)); 148 u2o_set(base, USB2_PLL_REG0, 149 0xd << USB2_PLL_REFDIV_SHIFT_MMP3 150 | 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3); 151 } else if (cpu_is_mmp3_b0()) { 152 u2o_clear(base, USB2_PLL_REG0, USB2_PLL_REFDIV_MASK_MMP3_B0 153 | USB2_PLL_FBDIV_MASK_MMP3_B0); 154 u2o_set(base, USB2_PLL_REG0, 155 0xd << USB2_PLL_REFDIV_SHIFT_MMP3_B0 156 | 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3_B0); 157 } else { 158 dev_err(&phy->dev, "unsupported silicon revision\n"); 159 return -ENODEV; 160 } 161 162 u2o_clear(base, USB2_PLL_REG1, USB2_PLL_PU_PLL_MASK 163 | USB2_PLL_ICP_MASK_MMP3 164 | USB2_PLL_KVCO_MASK_MMP3 165 | USB2_PLL_CALI12_MASK_MMP3); 166 u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_PU_PLL_SHIFT_MMP3 167 | 1 << USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 168 | 3 << USB2_PLL_ICP_SHIFT_MMP3 169 | 3 << USB2_PLL_KVCO_SHIFT_MMP3 170 | 3 << USB2_PLL_CAL12_SHIFT_MMP3); 171 172 u2o_clear(base, USB2_TX_REG0, USB2_TX_IMPCAL_VTH_MASK_MMP3); 173 u2o_set(base, USB2_TX_REG0, 2 << USB2_TX_IMPCAL_VTH_SHIFT_MMP3); 174 175 u2o_clear(base, USB2_TX_REG1, USB2_TX_VDD12_MASK_MMP3 176 | USB2_TX_AMP_MASK_MMP3 177 | USB2_TX_CK60_PHSEL_MASK_MMP3); 178 u2o_set(base, USB2_TX_REG1, 3 << USB2_TX_VDD12_SHIFT_MMP3 179 | 4 << USB2_TX_AMP_SHIFT_MMP3 180 | 4 << USB2_TX_CK60_PHSEL_SHIFT_MMP3); 181 182 u2o_clear(base, USB2_TX_REG2, 3 << USB2_TX_DRV_SLEWRATE_SHIFT); 183 u2o_set(base, USB2_TX_REG2, 2 << USB2_TX_DRV_SLEWRATE_SHIFT); 184 185 u2o_clear(base, USB2_RX_REG0, USB2_RX_SQ_THRESH_MASK_MMP3); 186 u2o_set(base, USB2_RX_REG0, 0xa << USB2_RX_SQ_THRESH_SHIFT_MMP3); 187 188 u2o_set(base, USB2_ANA_REG1, 0x1 << USB2_ANA_PU_ANA_SHIFT_MMP3); 189 190 u2o_set(base, USB2_OTG_REG0, 0x1 << USB2_OTG_PU_OTG_SHIFT_MMP3); 191 192 return 0; 193 } 194 195 static int mmp3_usb_phy_calibrate(struct phy *phy) 196 { 197 struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy); 198 void __iomem *base = mmp3_usb_phy->base; 199 int loops; 200 201 /* 202 * PLL VCO and TX Impedance Calibration Timing: 203 * 204 * _____________________________________ 205 * PU __________| 206 * _____________________________ 207 * VCOCAL START _________| 208 * ___ 209 * REG_RCAL_START ________________| |________|_______ 210 * | 200us | 400us | 40| 400us | USB PHY READY 211 */ 212 213 udelay(200); 214 u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_VCOCAL_START_SHIFT_MMP3); 215 udelay(400); 216 u2o_set(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3); 217 udelay(40); 218 u2o_clear(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3); 219 udelay(400); 220 221 loops = 0; 222 while ((u2o_get(base, USB2_PLL_REG1) & USB2_PLL_READY_MASK_MMP3) == 0) { 223 mdelay(1); 224 loops++; 225 if (loops > 100) { 226 dev_err(&phy->dev, "PLL_READY not set after 100mS.\n"); 227 return -ETIMEDOUT; 228 } 229 } 230 231 return 0; 232 } 233 234 static const struct phy_ops mmp3_usb_phy_ops = { 235 .init = mmp3_usb_phy_init, 236 .calibrate = mmp3_usb_phy_calibrate, 237 .owner = THIS_MODULE, 238 }; 239 240 static const struct of_device_id mmp3_usb_phy_of_match[] = { 241 { .compatible = "marvell,mmp3-usb-phy", }, 242 { }, 243 }; 244 MODULE_DEVICE_TABLE(of, mmp3_usb_phy_of_match); 245 246 static int mmp3_usb_phy_probe(struct platform_device *pdev) 247 { 248 struct device *dev = &pdev->dev; 249 struct mmp3_usb_phy *mmp3_usb_phy; 250 struct phy_provider *provider; 251 252 mmp3_usb_phy = devm_kzalloc(dev, sizeof(*mmp3_usb_phy), GFP_KERNEL); 253 if (!mmp3_usb_phy) 254 return -ENOMEM; 255 256 mmp3_usb_phy->base = devm_platform_ioremap_resource(pdev, 0); 257 if (IS_ERR(mmp3_usb_phy->base)) { 258 dev_err(dev, "failed to remap PHY regs\n"); 259 return PTR_ERR(mmp3_usb_phy->base); 260 } 261 262 mmp3_usb_phy->phy = devm_phy_create(dev, NULL, &mmp3_usb_phy_ops); 263 if (IS_ERR(mmp3_usb_phy->phy)) { 264 dev_err(dev, "failed to create PHY\n"); 265 return PTR_ERR(mmp3_usb_phy->phy); 266 } 267 268 phy_set_drvdata(mmp3_usb_phy->phy, mmp3_usb_phy); 269 provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); 270 if (IS_ERR(provider)) { 271 dev_err(dev, "failed to register PHY provider\n"); 272 return PTR_ERR(provider); 273 } 274 275 return 0; 276 } 277 278 static struct platform_driver mmp3_usb_phy_driver = { 279 .probe = mmp3_usb_phy_probe, 280 .driver = { 281 .name = "mmp3-usb-phy", 282 .of_match_table = mmp3_usb_phy_of_match, 283 }, 284 }; 285 module_platform_driver(mmp3_usb_phy_driver); 286 287 MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); 288 MODULE_DESCRIPTION("Marvell MMP3 USB PHY Driver"); 289 MODULE_LICENSE("GPL v2"); 290