1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * HiSilicon INNO USB2 PHY Driver. 4 * 5 * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/delay.h> 10 #include <linux/io.h> 11 #include <linux/module.h> 12 #include <linux/platform_device.h> 13 #include <linux/phy/phy.h> 14 #include <linux/reset.h> 15 16 #define INNO_PHY_PORT_NUM 2 17 #define REF_CLK_STABLE_TIME 100 /* unit:us */ 18 #define UTMI_CLK_STABLE_TIME 200 /* unit:us */ 19 #define TEST_CLK_STABLE_TIME 2 /* unit:ms */ 20 #define PHY_CLK_STABLE_TIME 2 /* unit:ms */ 21 #define UTMI_RST_COMPLETE_TIME 2 /* unit:ms */ 22 #define POR_RST_COMPLETE_TIME 300 /* unit:us */ 23 #define PHY_TEST_DATA GENMASK(7, 0) 24 #define PHY_TEST_ADDR GENMASK(15, 8) 25 #define PHY_TEST_PORT GENMASK(18, 16) 26 #define PHY_TEST_WREN BIT(21) 27 #define PHY_TEST_CLK BIT(22) /* rising edge active */ 28 #define PHY_TEST_RST BIT(23) /* low active */ 29 #define PHY_CLK_ENABLE BIT(2) 30 31 struct hisi_inno_phy_port { 32 struct reset_control *utmi_rst; 33 struct hisi_inno_phy_priv *priv; 34 }; 35 36 struct hisi_inno_phy_priv { 37 void __iomem *mmio; 38 struct clk *ref_clk; 39 struct reset_control *por_rst; 40 struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM]; 41 }; 42 43 static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv, 44 u8 port, u32 addr, u32 data) 45 { 46 void __iomem *reg = priv->mmio; 47 u32 val; 48 49 val = (data & PHY_TEST_DATA) | 50 ((addr << 8) & PHY_TEST_ADDR) | 51 ((port << 16) & PHY_TEST_PORT) | 52 PHY_TEST_WREN | PHY_TEST_RST; 53 writel(val, reg); 54 55 val |= PHY_TEST_CLK; 56 writel(val, reg); 57 58 val &= ~PHY_TEST_CLK; 59 writel(val, reg); 60 } 61 62 static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv) 63 { 64 /* The phy clk is controlled by the port0 register 0x06. */ 65 hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE); 66 msleep(PHY_CLK_STABLE_TIME); 67 } 68 69 static int hisi_inno_phy_init(struct phy *phy) 70 { 71 struct hisi_inno_phy_port *port = phy_get_drvdata(phy); 72 struct hisi_inno_phy_priv *priv = port->priv; 73 int ret; 74 75 ret = clk_prepare_enable(priv->ref_clk); 76 if (ret) 77 return ret; 78 udelay(REF_CLK_STABLE_TIME); 79 80 reset_control_deassert(priv->por_rst); 81 udelay(POR_RST_COMPLETE_TIME); 82 83 /* Set up phy registers */ 84 hisi_inno_phy_setup(priv); 85 86 reset_control_deassert(port->utmi_rst); 87 udelay(UTMI_RST_COMPLETE_TIME); 88 89 return 0; 90 } 91 92 static int hisi_inno_phy_exit(struct phy *phy) 93 { 94 struct hisi_inno_phy_port *port = phy_get_drvdata(phy); 95 struct hisi_inno_phy_priv *priv = port->priv; 96 97 reset_control_assert(port->utmi_rst); 98 reset_control_assert(priv->por_rst); 99 clk_disable_unprepare(priv->ref_clk); 100 101 return 0; 102 } 103 104 static const struct phy_ops hisi_inno_phy_ops = { 105 .init = hisi_inno_phy_init, 106 .exit = hisi_inno_phy_exit, 107 .owner = THIS_MODULE, 108 }; 109 110 static int hisi_inno_phy_probe(struct platform_device *pdev) 111 { 112 struct device *dev = &pdev->dev; 113 struct device_node *np = dev->of_node; 114 struct hisi_inno_phy_priv *priv; 115 struct phy_provider *provider; 116 struct device_node *child; 117 struct resource *res; 118 int i = 0; 119 int ret; 120 121 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 122 if (!priv) 123 return -ENOMEM; 124 125 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 126 priv->mmio = devm_ioremap_resource(dev, res); 127 if (IS_ERR(priv->mmio)) { 128 ret = PTR_ERR(priv->mmio); 129 return ret; 130 } 131 132 priv->ref_clk = devm_clk_get(dev, NULL); 133 if (IS_ERR(priv->ref_clk)) 134 return PTR_ERR(priv->ref_clk); 135 136 priv->por_rst = devm_reset_control_get_exclusive(dev, NULL); 137 if (IS_ERR(priv->por_rst)) 138 return PTR_ERR(priv->por_rst); 139 140 for_each_child_of_node(np, child) { 141 struct reset_control *rst; 142 struct phy *phy; 143 144 rst = of_reset_control_get_exclusive(child, NULL); 145 if (IS_ERR(rst)) 146 return PTR_ERR(rst); 147 priv->ports[i].utmi_rst = rst; 148 priv->ports[i].priv = priv; 149 150 phy = devm_phy_create(dev, child, &hisi_inno_phy_ops); 151 if (IS_ERR(phy)) 152 return PTR_ERR(phy); 153 154 phy_set_bus_width(phy, 8); 155 phy_set_drvdata(phy, &priv->ports[i]); 156 i++; 157 158 if (i > INNO_PHY_PORT_NUM) { 159 dev_warn(dev, "Support %d ports in maximum\n", i); 160 break; 161 } 162 } 163 164 provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); 165 return PTR_ERR_OR_ZERO(provider); 166 } 167 168 static const struct of_device_id hisi_inno_phy_of_match[] = { 169 { .compatible = "hisilicon,inno-usb2-phy", }, 170 { .compatible = "hisilicon,hi3798cv200-usb2-phy", }, 171 { }, 172 }; 173 MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match); 174 175 static struct platform_driver hisi_inno_phy_driver = { 176 .probe = hisi_inno_phy_probe, 177 .driver = { 178 .name = "hisi-inno-phy", 179 .of_match_table = hisi_inno_phy_of_match, 180 } 181 }; 182 module_platform_driver(hisi_inno_phy_driver); 183 184 MODULE_DESCRIPTION("HiSilicon INNO USB2 PHY Driver"); 185 MODULE_LICENSE("GPL v2"); 186