1 /* 2 * Copyright (C) 2017 Broadcom 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation version 2. 7 * 8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 9 * kind, whether express or implied; without even the implied warranty 10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 */ 13 14 #include <linux/delay.h> 15 #include <linux/extcon-provider.h> 16 #include <linux/gpio.h> 17 #include <linux/gpio/consumer.h> 18 #include <linux/init.h> 19 #include <linux/interrupt.h> 20 #include <linux/io.h> 21 #include <linux/irq.h> 22 #include <linux/mfd/syscon.h> 23 #include <linux/module.h> 24 #include <linux/of.h> 25 #include <linux/of_address.h> 26 #include <linux/phy/phy.h> 27 #include <linux/platform_device.h> 28 #include <linux/regmap.h> 29 #include <linux/slab.h> 30 #include <linux/workqueue.h> 31 32 #define ICFG_DRD_AFE 0x0 33 #define ICFG_MISC_STAT 0x18 34 #define ICFG_DRD_P0CTL 0x1C 35 #define ICFG_STRAP_CTRL 0x20 36 #define ICFG_FSM_CTRL 0x24 37 38 #define ICFG_DEV_BIT BIT(2) 39 #define IDM_RST_BIT BIT(0) 40 #define AFE_CORERDY_VDDC BIT(18) 41 #define PHY_PLL_RESETB BIT(15) 42 #define PHY_RESETB BIT(14) 43 #define PHY_PLL_LOCK BIT(0) 44 45 #define DRD_DEV_MODE BIT(20) 46 #define OHCI_OVRCUR_POL BIT(11) 47 #define ICFG_OFF_MODE BIT(6) 48 #define PLL_LOCK_RETRY 1000 49 50 #define EVT_DEVICE 0 51 #define EVT_HOST 1 52 53 #define DRD_HOST_MODE (BIT(2) | BIT(3)) 54 #define DRD_DEVICE_MODE (BIT(4) | BIT(5)) 55 #define DRD_HOST_VAL 0x803 56 #define DRD_DEV_VAL 0x807 57 #define GPIO_DELAY 20 58 59 struct ns2_phy_data; 60 struct ns2_phy_driver { 61 void __iomem *icfgdrd_regs; 62 void __iomem *idmdrd_rst_ctrl; 63 void __iomem *crmu_usb2_ctrl; 64 void __iomem *usb2h_strap_reg; 65 struct ns2_phy_data *data; 66 struct extcon_dev *edev; 67 struct gpio_desc *vbus_gpiod; 68 struct gpio_desc *id_gpiod; 69 int id_irq; 70 int vbus_irq; 71 unsigned long debounce_jiffies; 72 struct delayed_work wq_extcon; 73 }; 74 75 struct ns2_phy_data { 76 struct ns2_phy_driver *driver; 77 struct phy *phy; 78 int new_state; 79 }; 80 81 static const unsigned int usb_extcon_cable[] = { 82 EXTCON_USB, 83 EXTCON_USB_HOST, 84 EXTCON_NONE, 85 }; 86 87 static inline int pll_lock_stat(u32 usb_reg, int reg_mask, 88 struct ns2_phy_driver *driver) 89 { 90 int retry = PLL_LOCK_RETRY; 91 u32 val; 92 93 do { 94 udelay(1); 95 val = readl(driver->icfgdrd_regs + usb_reg); 96 if (val & reg_mask) 97 return 0; 98 } while (--retry > 0); 99 100 return -EBUSY; 101 } 102 103 static int ns2_drd_phy_init(struct phy *phy) 104 { 105 struct ns2_phy_data *data = phy_get_drvdata(phy); 106 struct ns2_phy_driver *driver = data->driver; 107 u32 val; 108 109 val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL); 110 111 if (data->new_state == EVT_HOST) { 112 val &= ~DRD_DEVICE_MODE; 113 val |= DRD_HOST_MODE; 114 } else { 115 val &= ~DRD_HOST_MODE; 116 val |= DRD_DEVICE_MODE; 117 } 118 writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); 119 120 return 0; 121 } 122 123 static int ns2_drd_phy_poweroff(struct phy *phy) 124 { 125 struct ns2_phy_data *data = phy_get_drvdata(phy); 126 struct ns2_phy_driver *driver = data->driver; 127 u32 val; 128 129 val = readl(driver->crmu_usb2_ctrl); 130 val &= ~AFE_CORERDY_VDDC; 131 writel(val, driver->crmu_usb2_ctrl); 132 133 val = readl(driver->crmu_usb2_ctrl); 134 val &= ~DRD_DEV_MODE; 135 writel(val, driver->crmu_usb2_ctrl); 136 137 /* Disable Host and Device Mode */ 138 val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL); 139 val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE | ICFG_OFF_MODE); 140 writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); 141 142 return 0; 143 } 144 145 static int ns2_drd_phy_poweron(struct phy *phy) 146 { 147 struct ns2_phy_data *data = phy_get_drvdata(phy); 148 struct ns2_phy_driver *driver = data->driver; 149 u32 extcon_event = data->new_state; 150 int ret; 151 u32 val; 152 153 if (extcon_event == EVT_DEVICE) { 154 writel(DRD_DEV_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL); 155 156 val = readl(driver->idmdrd_rst_ctrl); 157 val &= ~IDM_RST_BIT; 158 writel(val, driver->idmdrd_rst_ctrl); 159 160 val = readl(driver->crmu_usb2_ctrl); 161 val |= (AFE_CORERDY_VDDC | DRD_DEV_MODE); 162 writel(val, driver->crmu_usb2_ctrl); 163 164 /* Bring PHY and PHY_PLL out of Reset */ 165 val = readl(driver->crmu_usb2_ctrl); 166 val |= (PHY_PLL_RESETB | PHY_RESETB); 167 writel(val, driver->crmu_usb2_ctrl); 168 169 ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver); 170 if (ret < 0) { 171 dev_err(&phy->dev, "Phy PLL lock failed\n"); 172 return ret; 173 } 174 } else { 175 writel(DRD_HOST_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL); 176 177 val = readl(driver->crmu_usb2_ctrl); 178 val |= AFE_CORERDY_VDDC; 179 writel(val, driver->crmu_usb2_ctrl); 180 181 ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver); 182 if (ret < 0) { 183 dev_err(&phy->dev, "Phy PLL lock failed\n"); 184 return ret; 185 } 186 187 val = readl(driver->idmdrd_rst_ctrl); 188 val &= ~IDM_RST_BIT; 189 writel(val, driver->idmdrd_rst_ctrl); 190 191 /* port over current Polarity */ 192 val = readl(driver->usb2h_strap_reg); 193 val |= OHCI_OVRCUR_POL; 194 writel(val, driver->usb2h_strap_reg); 195 } 196 197 return 0; 198 } 199 200 static void connect_change(struct ns2_phy_driver *driver) 201 { 202 u32 extcon_event; 203 u32 val; 204 205 extcon_event = driver->data->new_state; 206 val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL); 207 208 switch (extcon_event) { 209 case EVT_DEVICE: 210 val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE); 211 writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); 212 213 val = (val & ~DRD_HOST_MODE) | DRD_DEVICE_MODE; 214 writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); 215 216 val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL); 217 val |= ICFG_DEV_BIT; 218 writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL); 219 break; 220 221 case EVT_HOST: 222 val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE); 223 writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); 224 225 val = (val & ~DRD_DEVICE_MODE) | DRD_HOST_MODE; 226 writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); 227 228 val = readl(driver->usb2h_strap_reg); 229 val |= OHCI_OVRCUR_POL; 230 writel(val, driver->usb2h_strap_reg); 231 232 val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL); 233 val &= ~ICFG_DEV_BIT; 234 writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL); 235 break; 236 237 default: 238 pr_err("Invalid extcon event\n"); 239 break; 240 } 241 } 242 243 static void extcon_work(struct work_struct *work) 244 { 245 struct ns2_phy_driver *driver; 246 int vbus; 247 int id; 248 249 driver = container_of(to_delayed_work(work), 250 struct ns2_phy_driver, wq_extcon); 251 252 id = gpiod_get_value_cansleep(driver->id_gpiod); 253 vbus = gpiod_get_value_cansleep(driver->vbus_gpiod); 254 255 if (!id && vbus) { /* Host connected */ 256 extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, true); 257 pr_debug("Host cable connected\n"); 258 driver->data->new_state = EVT_HOST; 259 connect_change(driver); 260 } else if (id && !vbus) { /* Disconnected */ 261 extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, false); 262 extcon_set_state_sync(driver->edev, EXTCON_USB, false); 263 pr_debug("Cable disconnected\n"); 264 } else if (id && vbus) { /* Device connected */ 265 extcon_set_state_sync(driver->edev, EXTCON_USB, true); 266 pr_debug("Device cable connected\n"); 267 driver->data->new_state = EVT_DEVICE; 268 connect_change(driver); 269 } 270 } 271 272 static irqreturn_t gpio_irq_handler(int irq, void *dev_id) 273 { 274 struct ns2_phy_driver *driver = dev_id; 275 276 queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon, 277 driver->debounce_jiffies); 278 279 return IRQ_HANDLED; 280 } 281 282 static struct phy_ops ops = { 283 .init = ns2_drd_phy_init, 284 .power_on = ns2_drd_phy_poweron, 285 .power_off = ns2_drd_phy_poweroff, 286 .owner = THIS_MODULE, 287 }; 288 289 static const struct of_device_id ns2_drd_phy_dt_ids[] = { 290 { .compatible = "brcm,ns2-drd-phy", }, 291 { } 292 }; 293 MODULE_DEVICE_TABLE(of, ns2_drd_phy_dt_ids); 294 295 static int ns2_drd_phy_probe(struct platform_device *pdev) 296 { 297 struct phy_provider *phy_provider; 298 struct device *dev = &pdev->dev; 299 struct ns2_phy_driver *driver; 300 struct ns2_phy_data *data; 301 struct resource *res; 302 int ret; 303 u32 val; 304 305 driver = devm_kzalloc(dev, sizeof(struct ns2_phy_driver), 306 GFP_KERNEL); 307 if (!driver) 308 return -ENOMEM; 309 310 driver->data = devm_kzalloc(dev, sizeof(struct ns2_phy_data), 311 GFP_KERNEL); 312 if (!driver->data) 313 return -ENOMEM; 314 315 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "icfg"); 316 driver->icfgdrd_regs = devm_ioremap_resource(dev, res); 317 if (IS_ERR(driver->icfgdrd_regs)) 318 return PTR_ERR(driver->icfgdrd_regs); 319 320 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rst-ctrl"); 321 driver->idmdrd_rst_ctrl = devm_ioremap_resource(dev, res); 322 if (IS_ERR(driver->idmdrd_rst_ctrl)) 323 return PTR_ERR(driver->idmdrd_rst_ctrl); 324 325 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crmu-ctrl"); 326 driver->crmu_usb2_ctrl = devm_ioremap_resource(dev, res); 327 if (IS_ERR(driver->crmu_usb2_ctrl)) 328 return PTR_ERR(driver->crmu_usb2_ctrl); 329 330 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2-strap"); 331 driver->usb2h_strap_reg = devm_ioremap_resource(dev, res); 332 if (IS_ERR(driver->usb2h_strap_reg)) 333 return PTR_ERR(driver->usb2h_strap_reg); 334 335 /* create extcon */ 336 driver->id_gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN); 337 if (IS_ERR(driver->id_gpiod)) { 338 dev_err(dev, "failed to get ID GPIO\n"); 339 return PTR_ERR(driver->id_gpiod); 340 } 341 driver->vbus_gpiod = devm_gpiod_get(&pdev->dev, "vbus", GPIOD_IN); 342 if (IS_ERR(driver->vbus_gpiod)) { 343 dev_err(dev, "failed to get VBUS GPIO\n"); 344 return PTR_ERR(driver->vbus_gpiod); 345 } 346 347 driver->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable); 348 if (IS_ERR(driver->edev)) { 349 dev_err(dev, "failed to allocate extcon device\n"); 350 return -ENOMEM; 351 } 352 353 ret = devm_extcon_dev_register(dev, driver->edev); 354 if (ret < 0) { 355 dev_err(dev, "failed to register extcon device\n"); 356 return ret; 357 } 358 359 ret = gpiod_set_debounce(driver->id_gpiod, GPIO_DELAY * 1000); 360 if (ret < 0) 361 driver->debounce_jiffies = msecs_to_jiffies(GPIO_DELAY); 362 363 INIT_DELAYED_WORK(&driver->wq_extcon, extcon_work); 364 365 driver->id_irq = gpiod_to_irq(driver->id_gpiod); 366 if (driver->id_irq < 0) { 367 dev_err(dev, "failed to get ID IRQ\n"); 368 return driver->id_irq; 369 } 370 371 driver->vbus_irq = gpiod_to_irq(driver->vbus_gpiod); 372 if (driver->vbus_irq < 0) { 373 dev_err(dev, "failed to get ID IRQ\n"); 374 return driver->vbus_irq; 375 } 376 377 ret = devm_request_irq(dev, driver->id_irq, gpio_irq_handler, 378 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, 379 "usb_id", driver); 380 if (ret < 0) { 381 dev_err(dev, "failed to request handler for ID IRQ\n"); 382 return ret; 383 } 384 385 ret = devm_request_irq(dev, driver->vbus_irq, gpio_irq_handler, 386 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, 387 "usb_vbus", driver); 388 if (ret < 0) { 389 dev_err(dev, "failed to request handler for VBUS IRQ\n"); 390 return ret; 391 } 392 393 dev_set_drvdata(dev, driver); 394 395 /* Shutdown all ports. They can be powered up as required */ 396 val = readl(driver->crmu_usb2_ctrl); 397 val &= ~(AFE_CORERDY_VDDC | PHY_RESETB); 398 writel(val, driver->crmu_usb2_ctrl); 399 400 data = driver->data; 401 data->phy = devm_phy_create(dev, dev->of_node, &ops); 402 if (IS_ERR(data->phy)) { 403 dev_err(dev, "Failed to create usb drd phy\n"); 404 return PTR_ERR(data->phy); 405 } 406 407 data->driver = driver; 408 phy_set_drvdata(data->phy, data); 409 410 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); 411 if (IS_ERR(phy_provider)) { 412 dev_err(dev, "Failed to register as phy provider\n"); 413 return PTR_ERR(phy_provider); 414 } 415 416 platform_set_drvdata(pdev, driver); 417 418 dev_info(dev, "Registered NS2 DRD Phy device\n"); 419 queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon, 420 driver->debounce_jiffies); 421 422 return 0; 423 } 424 425 static struct platform_driver ns2_drd_phy_driver = { 426 .probe = ns2_drd_phy_probe, 427 .driver = { 428 .name = "bcm-ns2-usbphy", 429 .of_match_table = of_match_ptr(ns2_drd_phy_dt_ids), 430 }, 431 }; 432 module_platform_driver(ns2_drd_phy_driver); 433 434 MODULE_ALIAS("platform:bcm-ns2-drd-phy"); 435 MODULE_AUTHOR("Broadcom"); 436 MODULE_DESCRIPTION("Broadcom NS2 USB2 PHY driver"); 437 MODULE_LICENSE("GPL v2"); 438