xref: /openbmc/linux/drivers/phy/broadcom/Kconfig (revision f9834f18)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Phy drivers for Broadcom platforms
4#
5config PHY_CYGNUS_PCIE
6	tristate "Broadcom Cygnus PCIe PHY driver"
7	depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
8	select GENERIC_PHY
9	default ARCH_BCM_CYGNUS
10	help
11	  Enable this to support the Broadcom Cygnus PCIe PHY.
12	  If unsure, say N.
13
14config PHY_BCM_SR_USB
15	tristate "Broadcom Stingray USB PHY driver"
16	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
17	select GENERIC_PHY
18	default ARCH_BCM_IPROC
19	help
20	  Enable this to support the Broadcom Stingray USB PHY
21	  driver. It supports all versions of Superspeed and
22	  Highspeed PHYs.
23	  If unsure, say N.
24
25config BCM_KONA_USB2_PHY
26	tristate "Broadcom Kona USB2 PHY Driver"
27	depends on HAS_IOMEM
28	select GENERIC_PHY
29	help
30	  Enable this to support the Broadcom Kona USB 2.0 PHY.
31
32config PHY_BCM_NS_USB2
33	tristate "Broadcom Northstar USB 2.0 PHY Driver"
34	depends on ARCH_BCM_IPROC || COMPILE_TEST
35	depends on HAS_IOMEM && OF
36	select GENERIC_PHY
37	help
38	  Enable this to support Broadcom USB 2.0 PHY connected to the USB
39	  controller on Northstar family.
40
41config PHY_BCM_NS_USB3
42	tristate "Broadcom Northstar USB 3.0 PHY Driver"
43	depends on ARCH_BCM_IPROC || COMPILE_TEST
44	depends on HAS_IOMEM && OF
45	depends on MDIO_BUS
46	select GENERIC_PHY
47	help
48	  Enable this to support Broadcom USB 3.0 PHY connected to the USB
49	  controller on Northstar family.
50
51config PHY_NS2_PCIE
52	tristate "Broadcom Northstar2 PCIe PHY driver"
53	depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS)
54	select GENERIC_PHY
55	default ARCH_BCM_IPROC
56	help
57	  Enable this to support the Broadcom Northstar2 PCIe PHY.
58	  If unsure, say N.
59
60config PHY_NS2_USB_DRD
61	tristate "Broadcom Northstar2 USB DRD PHY support"
62	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
63	select GENERIC_PHY
64	select EXTCON
65	default ARCH_BCM_IPROC
66	help
67	  Enable this to support the Broadcom Northstar2 USB DRD PHY.
68	  This driver initializes the PHY in either HOST or DEVICE mode.
69	  The host or device configuration is read from device tree.
70
71	  If unsure, say N.
72
73config PHY_BRCM_SATA
74	tristate "Broadcom SATA PHY driver"
75	depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
76		   ARCH_BCM_63XX || COMPILE_TEST
77	depends on OF
78	select GENERIC_PHY
79	default ARCH_BCM_IPROC
80	help
81	  Enable this to support the Broadcom SATA PHY.
82	  If unsure, say N.
83
84config PHY_BRCM_USB
85	tristate "Broadcom STB USB PHY driver"
86	depends on ARCH_BRCMSTB || COMPILE_TEST
87	depends on OF
88	select GENERIC_PHY
89	select SOC_BRCMSTB
90	default ARCH_BRCMSTB
91	help
92	  Enable this to support the Broadcom STB USB PHY.
93	  This driver is required by the USB XHCI, EHCI and OHCI
94	  drivers.
95	  If unsure, say N.
96
97config PHY_BCM_SR_PCIE
98	tristate "Broadcom Stingray PCIe PHY driver"
99	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
100	select GENERIC_PHY
101	select MFD_SYSCON
102	default ARCH_BCM_IPROC
103	help
104	  Enable this to support the Broadcom Stingray PCIe PHY
105	  If unsure, say N.
106