1# 2# PHY 3# 4 5menu "PHY Subsystem" 6 7config GENERIC_PHY 8 bool "PHY Core" 9 help 10 Generic PHY support. 11 12 This framework is designed to provide a generic interface for PHY 13 devices present in the kernel. This layer will have the generic 14 API by which phy drivers can create PHY using the phy framework and 15 phy users can obtain reference to the PHY. All the users of this 16 framework should select this config. 17 18config PHY_BCM_NS_USB2 19 tristate "Broadcom Northstar USB 2.0 PHY Driver" 20 depends on ARCH_BCM_IPROC || COMPILE_TEST 21 depends on HAS_IOMEM && OF 22 select GENERIC_PHY 23 help 24 Enable this to support Broadcom USB 2.0 PHY connected to the USB 25 controller on Northstar family. 26 27config PHY_BERLIN_USB 28 tristate "Marvell Berlin USB PHY Driver" 29 depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF 30 select GENERIC_PHY 31 help 32 Enable this to support the USB PHY on Marvell Berlin SoCs. 33 34config PHY_BERLIN_SATA 35 tristate "Marvell Berlin SATA PHY driver" 36 depends on ARCH_BERLIN && HAS_IOMEM && OF 37 select GENERIC_PHY 38 help 39 Enable this to support the SATA PHY on Marvell Berlin SoCs. 40 41config ARMADA375_USBCLUSTER_PHY 42 def_bool y 43 depends on MACH_ARMADA_375 || COMPILE_TEST 44 depends on OF && HAS_IOMEM 45 select GENERIC_PHY 46 47config PHY_DA8XX_USB 48 tristate "TI DA8xx USB PHY Driver" 49 depends on ARCH_DAVINCI_DA8XX 50 select GENERIC_PHY 51 select MFD_SYSCON 52 help 53 Enable this to support the USB PHY on DA8xx SoCs. 54 55 This driver controls both the USB 1.1 PHY and the USB 2.0 PHY. 56 57config PHY_DM816X_USB 58 tristate "TI dm816x USB PHY driver" 59 depends on ARCH_OMAP2PLUS 60 depends on USB_SUPPORT 61 select GENERIC_PHY 62 select USB_PHY 63 help 64 Enable this for dm816x USB to work. 65 66config PHY_EXYNOS_MIPI_VIDEO 67 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" 68 depends on HAS_IOMEM 69 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 70 select GENERIC_PHY 71 default y if ARCH_S5PV210 || ARCH_EXYNOS 72 help 73 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P 74 and EXYNOS SoCs. 75 76config PHY_LPC18XX_USB_OTG 77 tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" 78 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 79 depends on MFD_SYSCON 80 select GENERIC_PHY 81 help 82 Enable this to support NXP LPC18xx/43xx internal USB OTG PHY. 83 84 This driver is need for USB0 support on LPC18xx/43xx and takes 85 care of enabling and clock setup. 86 87config PHY_PXA_28NM_HSIC 88 tristate "Marvell USB HSIC 28nm PHY Driver" 89 depends on HAS_IOMEM 90 select GENERIC_PHY 91 help 92 Enable this to support Marvell USB HSIC PHY driver for Marvell 93 SoC. This driver will do the PHY initialization and shutdown. 94 The PHY driver will be used by Marvell ehci driver. 95 96 To compile this driver as a module, choose M here. 97 98config PHY_PXA_28NM_USB2 99 tristate "Marvell USB 2.0 28nm PHY Driver" 100 depends on HAS_IOMEM 101 select GENERIC_PHY 102 help 103 Enable this to support Marvell USB 2.0 PHY driver for Marvell 104 SoC. This driver will do the PHY initialization and shutdown. 105 The PHY driver will be used by Marvell udc/ehci/otg driver. 106 107 To compile this driver as a module, choose M here. 108 109config PHY_MVEBU_SATA 110 def_bool y 111 depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD 112 depends on OF 113 select GENERIC_PHY 114 115config PHY_MIPHY28LP 116 tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" 117 depends on ARCH_STI 118 select GENERIC_PHY 119 help 120 Enable this to support the miphy transceiver (for SATA/PCIE/USB3) 121 that is part of STMicroelectronics STiH407 SoC. 122 123config PHY_MIPHY365X 124 tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" 125 depends on ARCH_STI 126 depends on HAS_IOMEM 127 depends on OF 128 select GENERIC_PHY 129 help 130 Enable this to support the miphy transceiver (for SATA/PCIE) 131 that is part of STMicroelectronics STiH41x SoC series. 132 133config PHY_RCAR_GEN2 134 tristate "Renesas R-Car generation 2 USB PHY driver" 135 depends on ARCH_RENESAS 136 depends on GENERIC_PHY 137 help 138 Support for USB PHY found on Renesas R-Car generation 2 SoCs. 139 140config PHY_RCAR_GEN3_USB2 141 tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" 142 depends on ARCH_RENESAS 143 depends on EXTCON 144 select GENERIC_PHY 145 help 146 Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. 147 148config OMAP_CONTROL_PHY 149 tristate "OMAP CONTROL PHY Driver" 150 depends on ARCH_OMAP2PLUS || COMPILE_TEST 151 help 152 Enable this to add support for the PHY part present in the control 153 module. This driver has API to power on the USB2 PHY and to write to 154 the mailbox. The mailbox is present only in omap4 and the register to 155 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an 156 additional register to power on USB3 PHY/SATA PHY/PCIE PHY 157 (PIPE3 PHY). 158 159config OMAP_USB2 160 tristate "OMAP USB2 PHY Driver" 161 depends on ARCH_OMAP2PLUS 162 depends on USB_SUPPORT 163 select GENERIC_PHY 164 select USB_PHY 165 select OMAP_CONTROL_PHY 166 depends on OMAP_OCP2SCP 167 help 168 Enable this to support the transceiver that is part of SOC. This 169 driver takes care of all the PHY functionality apart from comparator. 170 The USB OTG controller communicates with the comparator using this 171 driver. 172 173config TI_PIPE3 174 tristate "TI PIPE3 PHY Driver" 175 depends on ARCH_OMAP2PLUS || COMPILE_TEST 176 select GENERIC_PHY 177 select OMAP_CONTROL_PHY 178 depends on OMAP_OCP2SCP 179 help 180 Enable this to support the PIPE3 PHY that is part of TI SOCs. This 181 driver takes care of all the PHY functionality apart from comparator. 182 This driver interacts with the "OMAP Control PHY Driver" to power 183 on/off the PHY. 184 185config TWL4030_USB 186 tristate "TWL4030 USB Transceiver Driver" 187 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS 188 depends on USB_SUPPORT 189 depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y' 190 select GENERIC_PHY 191 select USB_PHY 192 help 193 Enable this to support the USB OTG transceiver on TWL4030 194 family chips (including the TWL5030 and TPS659x0 devices). 195 This transceiver supports high and full speed devices plus, 196 in host mode, low speed. 197 198config PHY_EXYNOS_DP_VIDEO 199 tristate "EXYNOS SoC series Display Port PHY driver" 200 depends on OF 201 depends on ARCH_EXYNOS || COMPILE_TEST 202 default ARCH_EXYNOS 203 select GENERIC_PHY 204 help 205 Support for Display Port PHY found on Samsung EXYNOS SoCs. 206 207config BCM_KONA_USB2_PHY 208 tristate "Broadcom Kona USB2 PHY Driver" 209 depends on HAS_IOMEM 210 select GENERIC_PHY 211 help 212 Enable this to support the Broadcom Kona USB 2.0 PHY. 213 214config PHY_EXYNOS5250_SATA 215 tristate "Exynos5250 Sata SerDes/PHY driver" 216 depends on SOC_EXYNOS5250 217 depends on HAS_IOMEM 218 depends on OF 219 select GENERIC_PHY 220 select I2C 221 select I2C_S3C2410 222 select MFD_SYSCON 223 help 224 Enable this to support SATA SerDes/Phy found on Samsung's 225 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, 226 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host 227 port to accept one SATA device. 228 229config PHY_HIX5HD2_SATA 230 tristate "HIX5HD2 SATA PHY Driver" 231 depends on ARCH_HIX5HD2 && OF && HAS_IOMEM 232 select GENERIC_PHY 233 select MFD_SYSCON 234 help 235 Support for SATA PHY on Hisilicon hix5hd2 Soc. 236 237config PHY_MT65XX_USB3 238 tristate "Mediatek USB3.0 PHY Driver" 239 depends on ARCH_MEDIATEK && OF 240 select GENERIC_PHY 241 help 242 Say 'Y' here to add support for Mediatek USB3.0 PHY driver, 243 it supports multiple usb2.0 and usb3.0 ports. 244 245config PHY_HI6220_USB 246 tristate "hi6220 USB PHY support" 247 depends on (ARCH_HISI && ARM64) || COMPILE_TEST 248 select GENERIC_PHY 249 select MFD_SYSCON 250 help 251 Enable this to support the HISILICON HI6220 USB PHY. 252 253 To compile this driver as a module, choose M here. 254 255config PHY_SUN4I_USB 256 tristate "Allwinner sunxi SoC USB PHY driver" 257 depends on ARCH_SUNXI && HAS_IOMEM && OF 258 depends on RESET_CONTROLLER 259 depends on EXTCON 260 depends on POWER_SUPPLY 261 select GENERIC_PHY 262 help 263 Enable this to support the transceiver that is part of Allwinner 264 sunxi SoCs. 265 266 This driver controls the entire USB PHY block, both the USB OTG 267 parts, as well as the 2 regular USB 2 host PHYs. 268 269config PHY_SUN9I_USB 270 tristate "Allwinner sun9i SoC USB PHY driver" 271 depends on ARCH_SUNXI && HAS_IOMEM && OF 272 depends on RESET_CONTROLLER 273 depends on USB_SUPPORT 274 select USB_COMMON 275 select GENERIC_PHY 276 help 277 Enable this to support the transceiver that is part of Allwinner 278 sun9i SoCs. 279 280 This driver controls each individual USB 2 host PHY. 281 282config PHY_SAMSUNG_USB2 283 tristate "Samsung USB 2.0 PHY driver" 284 depends on HAS_IOMEM 285 depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 286 select GENERIC_PHY 287 select MFD_SYSCON 288 default ARCH_EXYNOS 289 help 290 Enable this to support the Samsung USB 2.0 PHY driver for Samsung 291 SoCs. This driver provides the interface for USB 2.0 PHY. Support 292 for particular PHYs will be enabled based on the SoC type in addition 293 to this driver. 294 295config PHY_S5PV210_USB2 296 bool "Support for S5PV210" 297 depends on PHY_SAMSUNG_USB2 298 depends on ARCH_S5PV210 299 help 300 Enable USB PHY support for S5PV210. This option requires that Samsung 301 USB 2.0 PHY driver is enabled and means that support for this 302 particular SoC is compiled in the driver. In case of S5PV210 two phys 303 are available - device and host. 304 305config PHY_EXYNOS4210_USB2 306 bool 307 depends on PHY_SAMSUNG_USB2 308 default CPU_EXYNOS4210 309 310config PHY_EXYNOS4X12_USB2 311 bool 312 depends on PHY_SAMSUNG_USB2 313 default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 314 315config PHY_EXYNOS5250_USB2 316 bool 317 depends on PHY_SAMSUNG_USB2 318 default SOC_EXYNOS5250 || SOC_EXYNOS5420 319 320config PHY_EXYNOS5_USBDRD 321 tristate "Exynos5 SoC series USB DRD PHY driver" 322 depends on ARCH_EXYNOS && OF 323 depends on HAS_IOMEM 324 depends on USB_DWC3_EXYNOS 325 select GENERIC_PHY 326 select MFD_SYSCON 327 default y 328 help 329 Enable USB DRD PHY support for Exynos 5 SoC series. 330 This driver provides PHY interface for USB 3.0 DRD controller 331 present on Exynos5 SoC series. 332 333config PHY_PISTACHIO_USB 334 tristate "IMG Pistachio USB2.0 PHY driver" 335 depends on MACH_PISTACHIO 336 select GENERIC_PHY 337 help 338 Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. 339 340config PHY_QCOM_APQ8064_SATA 341 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" 342 depends on ARCH_QCOM 343 depends on HAS_IOMEM 344 depends on OF 345 select GENERIC_PHY 346 347config PHY_QCOM_IPQ806X_SATA 348 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" 349 depends on ARCH_QCOM 350 depends on HAS_IOMEM 351 depends on OF 352 select GENERIC_PHY 353 354config PHY_ROCKCHIP_USB 355 tristate "Rockchip USB2 PHY Driver" 356 depends on ARCH_ROCKCHIP && OF 357 select GENERIC_PHY 358 help 359 Enable this to support the Rockchip USB 2.0 PHY. 360 361config PHY_ROCKCHIP_EMMC 362 tristate "Rockchip EMMC PHY Driver" 363 depends on ARCH_ROCKCHIP && OF 364 select GENERIC_PHY 365 help 366 Enable this to support the Rockchip EMMC PHY. 367 368config PHY_ROCKCHIP_DP 369 tristate "Rockchip Display Port PHY Driver" 370 depends on ARCH_ROCKCHIP && OF 371 select GENERIC_PHY 372 help 373 Enable this to support the Rockchip Display Port PHY. 374 375config PHY_ST_SPEAR1310_MIPHY 376 tristate "ST SPEAR1310-MIPHY driver" 377 select GENERIC_PHY 378 depends on MACH_SPEAR1310 || COMPILE_TEST 379 help 380 Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. 381 382config PHY_ST_SPEAR1340_MIPHY 383 tristate "ST SPEAR1340-MIPHY driver" 384 select GENERIC_PHY 385 depends on MACH_SPEAR1340 || COMPILE_TEST 386 help 387 Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. 388 389config PHY_XGENE 390 tristate "APM X-Gene 15Gbps PHY support" 391 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) 392 select GENERIC_PHY 393 help 394 This option enables support for APM X-Gene SoC multi-purpose PHY. 395 396config PHY_STIH407_USB 397 tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" 398 depends on RESET_CONTROLLER 399 depends on ARCH_STI || COMPILE_TEST 400 select GENERIC_PHY 401 help 402 Enable this support to enable the picoPHY device used by USB2 403 and USB3 controllers on STMicroelectronics STiH407 SoC families. 404 405config PHY_STIH41X_USB 406 tristate "STMicroelectronics USB2 PHY driver for STiH41x series" 407 depends on ARCH_STI 408 select GENERIC_PHY 409 help 410 Enable this to support the USB transceiver that is part of 411 STMicroelectronics STiH41x SoC series. 412 413config PHY_QCOM_UFS 414 tristate "Qualcomm UFS PHY driver" 415 depends on OF && ARCH_QCOM 416 select GENERIC_PHY 417 help 418 Support for UFS PHY on QCOM chipsets. 419 420config PHY_TUSB1210 421 tristate "TI TUSB1210 ULPI PHY module" 422 depends on USB_ULPI_BUS 423 select GENERIC_PHY 424 help 425 Support for TI TUSB1210 USB ULPI PHY. 426 427config PHY_BRCM_SATA 428 tristate "Broadcom SATA PHY driver" 429 depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST 430 depends on OF 431 select GENERIC_PHY 432 default ARCH_BCM_IPROC 433 help 434 Enable this to support the Broadcom SATA PHY. 435 If unsure, say N. 436 437config PHY_CYGNUS_PCIE 438 tristate "Broadcom Cygnus PCIe PHY driver" 439 depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) 440 select GENERIC_PHY 441 default ARCH_BCM_CYGNUS 442 help 443 Enable this to support the Broadcom Cygnus PCIe PHY. 444 If unsure, say N. 445 446source "drivers/phy/tegra/Kconfig" 447 448config PHY_NS2_PCIE 449 tristate "Broadcom Northstar2 PCIe PHY driver" 450 depends on OF && MDIO_BUS_MUX_BCM_IPROC 451 select GENERIC_PHY 452 default ARCH_BCM_IPROC 453 help 454 Enable this to support the Broadcom Northstar2 PCIe PHY. 455 If unsure, say N. 456endmenu 457