1# 2# PHY 3# 4 5menu "PHY Subsystem" 6 7config GENERIC_PHY 8 bool "PHY Core" 9 help 10 Generic PHY support. 11 12 This framework is designed to provide a generic interface for PHY 13 devices present in the kernel. This layer will have the generic 14 API by which phy drivers can create PHY using the phy framework and 15 phy users can obtain reference to the PHY. All the users of this 16 framework should select this config. 17 18config PHY_EXYNOS_MIPI_VIDEO 19 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" 20 depends on HAS_IOMEM 21 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 22 select GENERIC_PHY 23 default y if ARCH_S5PV210 || ARCH_EXYNOS 24 help 25 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P 26 and EXYNOS SoCs. 27 28config PHY_MVEBU_SATA 29 def_bool y 30 depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD 31 depends on OF 32 select GENERIC_PHY 33 34config OMAP_CONTROL_PHY 35 tristate "OMAP CONTROL PHY Driver" 36 help 37 Enable this to add support for the PHY part present in the control 38 module. This driver has API to power on the USB2 PHY and to write to 39 the mailbox. The mailbox is present only in omap4 and the register to 40 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an 41 additional register to power on USB3 PHY/SATA PHY/PCIE PHY 42 (PIPE3 PHY). 43 44config OMAP_USB2 45 tristate "OMAP USB2 PHY Driver" 46 depends on ARCH_OMAP2PLUS 47 depends on USB_PHY 48 select GENERIC_PHY 49 select OMAP_CONTROL_PHY 50 depends on OMAP_OCP2SCP 51 help 52 Enable this to support the transceiver that is part of SOC. This 53 driver takes care of all the PHY functionality apart from comparator. 54 The USB OTG controller communicates with the comparator using this 55 driver. 56 57config TI_PIPE3 58 tristate "TI PIPE3 PHY Driver" 59 depends on ARCH_OMAP2PLUS || COMPILE_TEST 60 select GENERIC_PHY 61 select OMAP_CONTROL_PHY 62 depends on OMAP_OCP2SCP 63 help 64 Enable this to support the PIPE3 PHY that is part of TI SOCs. This 65 driver takes care of all the PHY functionality apart from comparator. 66 This driver interacts with the "OMAP Control PHY Driver" to power 67 on/off the PHY. 68 69config TWL4030_USB 70 tristate "TWL4030 USB Transceiver Driver" 71 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS 72 depends on USB_PHY 73 select GENERIC_PHY 74 help 75 Enable this to support the USB OTG transceiver on TWL4030 76 family chips (including the TWL5030 and TPS659x0 devices). 77 This transceiver supports high and full speed devices plus, 78 in host mode, low speed. 79 80config PHY_EXYNOS_DP_VIDEO 81 tristate "EXYNOS SoC series Display Port PHY driver" 82 depends on OF 83 depends on ARCH_EXYNOS || COMPILE_TEST 84 default ARCH_EXYNOS 85 select GENERIC_PHY 86 help 87 Support for Display Port PHY found on Samsung EXYNOS SoCs. 88 89config BCM_KONA_USB2_PHY 90 tristate "Broadcom Kona USB2 PHY Driver" 91 depends on GENERIC_PHY 92 depends on HAS_IOMEM 93 help 94 Enable this to support the Broadcom Kona USB 2.0 PHY. 95 96config PHY_EXYNOS5250_SATA 97 tristate "Exynos5250 Sata SerDes/PHY driver" 98 depends on SOC_EXYNOS5250 99 depends on HAS_IOMEM 100 depends on OF 101 select GENERIC_PHY 102 select I2C 103 select I2C_S3C2410 104 select MFD_SYSCON 105 help 106 Enable this to support SATA SerDes/Phy found on Samsung's 107 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, 108 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host 109 port to accept one SATA device. 110 111config PHY_SUN4I_USB 112 tristate "Allwinner sunxi SoC USB PHY driver" 113 depends on ARCH_SUNXI && HAS_IOMEM && OF 114 select GENERIC_PHY 115 help 116 Enable this to support the transceiver that is part of Allwinner 117 sunxi SoCs. 118 119 This driver controls the entire USB PHY block, both the USB OTG 120 parts, as well as the 2 regular USB 2 host PHYs. 121 122config PHY_SAMSUNG_USB2 123 tristate "Samsung USB 2.0 PHY driver" 124 select GENERIC_PHY 125 select MFD_SYSCON 126 help 127 Enable this to support the Samsung USB 2.0 PHY driver for Samsung 128 SoCs. This driver provides the interface for USB 2.0 PHY. Support for 129 particular SoCs has to be enabled in addition to this driver. Number 130 and type of supported phys depends on the SoC. 131 132config PHY_EXYNOS4210_USB2 133 bool "Support for Exynos 4210" 134 depends on PHY_SAMSUNG_USB2 135 depends on CPU_EXYNOS4210 136 help 137 Enable USB PHY support for Exynos 4210. This option requires that 138 Samsung USB 2.0 PHY driver is enabled and means that support for this 139 particular SoC is compiled in the driver. In case of Exynos 4210 four 140 phys are available - device, host, HSIC0 and HSIC1. 141 142config PHY_EXYNOS4X12_USB2 143 bool "Support for Exynos 4x12" 144 depends on PHY_SAMSUNG_USB2 145 depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) 146 help 147 Enable USB PHY support for Exynos 4x12. This option requires that 148 Samsung USB 2.0 PHY driver is enabled and means that support for this 149 particular SoC is compiled in the driver. In case of Exynos 4x12 four 150 phys are available - device, host, HSIC0 and HSIC1. 151 152config PHY_EXYNOS5250_USB2 153 bool "Support for Exynos 5250" 154 depends on PHY_SAMSUNG_USB2 155 depends on SOC_EXYNOS5250 156 help 157 Enable USB PHY support for Exynos 5250. This option requires that 158 Samsung USB 2.0 PHY driver is enabled and means that support for this 159 particular SoC is compiled in the driver. In case of Exynos 5250 four 160 phys are available - device, host, HSIC0 and HSIC. 161 162config PHY_XGENE 163 tristate "APM X-Gene 15Gbps PHY support" 164 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) 165 select GENERIC_PHY 166 help 167 This option enables support for APM X-Gene SoC multi-purpose PHY. 168 169endmenu 170