1# 2# PHY 3# 4 5menu "PHY Subsystem" 6 7config GENERIC_PHY 8 bool "PHY Core" 9 help 10 Generic PHY support. 11 12 This framework is designed to provide a generic interface for PHY 13 devices present in the kernel. This layer will have the generic 14 API by which phy drivers can create PHY using the phy framework and 15 phy users can obtain reference to the PHY. All the users of this 16 framework should select this config. 17 18config PHY_BERLIN_SATA 19 tristate "Marvell Berlin SATA PHY driver" 20 depends on ARCH_BERLIN && HAS_IOMEM && OF 21 select GENERIC_PHY 22 help 23 Enable this to support the SATA PHY on Marvell Berlin SoCs. 24 25config PHY_EXYNOS_MIPI_VIDEO 26 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" 27 depends on HAS_IOMEM 28 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 29 select GENERIC_PHY 30 default y if ARCH_S5PV210 || ARCH_EXYNOS 31 help 32 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P 33 and EXYNOS SoCs. 34 35config PHY_MVEBU_SATA 36 def_bool y 37 depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD 38 depends on OF 39 select GENERIC_PHY 40 41config PHY_MIPHY365X 42 tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" 43 depends on ARCH_STI 44 depends on HAS_IOMEM 45 depends on OF 46 select GENERIC_PHY 47 help 48 Enable this to support the miphy transceiver (for SATA/PCIE) 49 that is part of STMicroelectronics STiH41x SoC series. 50 51config OMAP_CONTROL_PHY 52 tristate "OMAP CONTROL PHY Driver" 53 depends on ARCH_OMAP2PLUS || COMPILE_TEST 54 help 55 Enable this to add support for the PHY part present in the control 56 module. This driver has API to power on the USB2 PHY and to write to 57 the mailbox. The mailbox is present only in omap4 and the register to 58 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an 59 additional register to power on USB3 PHY/SATA PHY/PCIE PHY 60 (PIPE3 PHY). 61 62config OMAP_USB2 63 tristate "OMAP USB2 PHY Driver" 64 depends on ARCH_OMAP2PLUS 65 depends on USB_PHY 66 select GENERIC_PHY 67 select OMAP_CONTROL_PHY 68 depends on OMAP_OCP2SCP 69 help 70 Enable this to support the transceiver that is part of SOC. This 71 driver takes care of all the PHY functionality apart from comparator. 72 The USB OTG controller communicates with the comparator using this 73 driver. 74 75config TI_PIPE3 76 tristate "TI PIPE3 PHY Driver" 77 depends on ARCH_OMAP2PLUS || COMPILE_TEST 78 select GENERIC_PHY 79 select OMAP_CONTROL_PHY 80 depends on OMAP_OCP2SCP 81 help 82 Enable this to support the PIPE3 PHY that is part of TI SOCs. This 83 driver takes care of all the PHY functionality apart from comparator. 84 This driver interacts with the "OMAP Control PHY Driver" to power 85 on/off the PHY. 86 87config TWL4030_USB 88 tristate "TWL4030 USB Transceiver Driver" 89 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS 90 depends on USB_PHY 91 select GENERIC_PHY 92 help 93 Enable this to support the USB OTG transceiver on TWL4030 94 family chips (including the TWL5030 and TPS659x0 devices). 95 This transceiver supports high and full speed devices plus, 96 in host mode, low speed. 97 98config PHY_EXYNOS_DP_VIDEO 99 tristate "EXYNOS SoC series Display Port PHY driver" 100 depends on OF 101 depends on ARCH_EXYNOS || COMPILE_TEST 102 default ARCH_EXYNOS 103 select GENERIC_PHY 104 help 105 Support for Display Port PHY found on Samsung EXYNOS SoCs. 106 107config BCM_KONA_USB2_PHY 108 tristate "Broadcom Kona USB2 PHY Driver" 109 depends on HAS_IOMEM 110 select GENERIC_PHY 111 help 112 Enable this to support the Broadcom Kona USB 2.0 PHY. 113 114config PHY_EXYNOS5250_SATA 115 tristate "Exynos5250 Sata SerDes/PHY driver" 116 depends on SOC_EXYNOS5250 117 depends on HAS_IOMEM 118 depends on OF 119 select GENERIC_PHY 120 select I2C 121 select I2C_S3C2410 122 select MFD_SYSCON 123 help 124 Enable this to support SATA SerDes/Phy found on Samsung's 125 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, 126 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host 127 port to accept one SATA device. 128 129config PHY_HIX5HD2_SATA 130 tristate "HIX5HD2 SATA PHY Driver" 131 depends on ARCH_HIX5HD2 && OF && HAS_IOMEM 132 select GENERIC_PHY 133 select MFD_SYSCON 134 help 135 Support for SATA PHY on Hisilicon hix5hd2 Soc. 136 137config PHY_SUN4I_USB 138 tristate "Allwinner sunxi SoC USB PHY driver" 139 depends on ARCH_SUNXI && HAS_IOMEM && OF 140 depends on RESET_CONTROLLER 141 select GENERIC_PHY 142 help 143 Enable this to support the transceiver that is part of Allwinner 144 sunxi SoCs. 145 146 This driver controls the entire USB PHY block, both the USB OTG 147 parts, as well as the 2 regular USB 2 host PHYs. 148 149config PHY_SAMSUNG_USB2 150 tristate "Samsung USB 2.0 PHY driver" 151 depends on HAS_IOMEM 152 depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 153 select GENERIC_PHY 154 select MFD_SYSCON 155 default ARCH_EXYNOS 156 help 157 Enable this to support the Samsung USB 2.0 PHY driver for Samsung 158 SoCs. This driver provides the interface for USB 2.0 PHY. Support 159 for particular PHYs will be enabled based on the SoC type in addition 160 to this driver. 161 162config PHY_S5PV210_USB2 163 bool "Support for S5PV210" 164 depends on PHY_SAMSUNG_USB2 165 depends on ARCH_S5PV210 166 help 167 Enable USB PHY support for S5PV210. This option requires that Samsung 168 USB 2.0 PHY driver is enabled and means that support for this 169 particular SoC is compiled in the driver. In case of S5PV210 two phys 170 are available - device and host. 171 172config PHY_EXYNOS4210_USB2 173 bool 174 depends on PHY_SAMSUNG_USB2 175 default CPU_EXYNOS4210 176 177config PHY_EXYNOS4X12_USB2 178 bool 179 depends on PHY_SAMSUNG_USB2 180 default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 181 182config PHY_EXYNOS5250_USB2 183 bool 184 depends on PHY_SAMSUNG_USB2 185 default SOC_EXYNOS5250 || SOC_EXYNOS5420 186 187config PHY_EXYNOS5_USBDRD 188 tristate "Exynos5 SoC series USB DRD PHY driver" 189 depends on ARCH_EXYNOS5 && OF 190 depends on HAS_IOMEM 191 depends on USB_DWC3_EXYNOS 192 select GENERIC_PHY 193 select MFD_SYSCON 194 default y 195 help 196 Enable USB DRD PHY support for Exynos 5 SoC series. 197 This driver provides PHY interface for USB 3.0 DRD controller 198 present on Exynos5 SoC series. 199 200config PHY_QCOM_APQ8064_SATA 201 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" 202 depends on ARCH_QCOM 203 depends on HAS_IOMEM 204 depends on OF 205 select GENERIC_PHY 206 207config PHY_QCOM_IPQ806X_SATA 208 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" 209 depends on ARCH_QCOM 210 depends on HAS_IOMEM 211 depends on OF 212 select GENERIC_PHY 213 214config PHY_ST_SPEAR1310_MIPHY 215 tristate "ST SPEAR1310-MIPHY driver" 216 select GENERIC_PHY 217 help 218 Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. 219 220config PHY_ST_SPEAR1340_MIPHY 221 tristate "ST SPEAR1340-MIPHY driver" 222 select GENERIC_PHY 223 help 224 Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. 225 226config PHY_XGENE 227 tristate "APM X-Gene 15Gbps PHY support" 228 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) 229 select GENERIC_PHY 230 help 231 This option enables support for APM X-Gene SoC multi-purpose PHY. 232 233endmenu 234