xref: /openbmc/linux/drivers/phy/Kconfig (revision a8a28aff) 
1#
2# PHY
3#
4
5menu "PHY Subsystem"
6
7config GENERIC_PHY
8	bool "PHY Core"
9	help
10	  Generic PHY support.
11
12	  This framework is designed to provide a generic interface for PHY
13	  devices present in the kernel. This layer will have the generic
14	  API by which phy drivers can create PHY using the phy framework and
15	  phy users can obtain reference to the PHY. All the users of this
16	  framework should select this config.
17
18config PHY_EXYNOS_MIPI_VIDEO
19	tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
20	depends on HAS_IOMEM
21	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
22	select GENERIC_PHY
23	default y if ARCH_S5PV210 || ARCH_EXYNOS
24	help
25	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
26	  and EXYNOS SoCs.
27
28config PHY_MVEBU_SATA
29	def_bool y
30	depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
31	depends on OF
32	select GENERIC_PHY
33
34config OMAP_CONTROL_PHY
35	tristate "OMAP CONTROL PHY Driver"
36	depends on ARCH_OMAP2PLUS || COMPILE_TEST
37	help
38	  Enable this to add support for the PHY part present in the control
39	  module. This driver has API to power on the USB2 PHY and to write to
40	  the mailbox. The mailbox is present only in omap4 and the register to
41	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
42	  additional register to power on USB3 PHY/SATA PHY/PCIE PHY
43	  (PIPE3 PHY).
44
45config OMAP_USB2
46	tristate "OMAP USB2 PHY Driver"
47	depends on ARCH_OMAP2PLUS
48	depends on USB_PHY
49	select GENERIC_PHY
50	select OMAP_CONTROL_PHY
51	depends on OMAP_OCP2SCP
52	help
53	  Enable this to support the transceiver that is part of SOC. This
54	  driver takes care of all the PHY functionality apart from comparator.
55	  The USB OTG controller communicates with the comparator using this
56	  driver.
57
58config TI_PIPE3
59	tristate "TI PIPE3 PHY Driver"
60	depends on ARCH_OMAP2PLUS || COMPILE_TEST
61	select GENERIC_PHY
62	select OMAP_CONTROL_PHY
63	depends on OMAP_OCP2SCP
64	help
65	  Enable this to support the PIPE3 PHY that is part of TI SOCs. This
66	  driver takes care of all the PHY functionality apart from comparator.
67	  This driver interacts with the "OMAP Control PHY Driver" to power
68	  on/off the PHY.
69
70config TWL4030_USB
71	tristate "TWL4030 USB Transceiver Driver"
72	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
73	depends on USB_PHY
74	select GENERIC_PHY
75	help
76	  Enable this to support the USB OTG transceiver on TWL4030
77	  family chips (including the TWL5030 and TPS659x0 devices).
78	  This transceiver supports high and full speed devices plus,
79	  in host mode, low speed.
80
81config PHY_EXYNOS_DP_VIDEO
82	tristate "EXYNOS SoC series Display Port PHY driver"
83	depends on OF
84	depends on ARCH_EXYNOS || COMPILE_TEST
85	default ARCH_EXYNOS
86	select GENERIC_PHY
87	help
88	  Support for Display Port PHY found on Samsung EXYNOS SoCs.
89
90config BCM_KONA_USB2_PHY
91	tristate "Broadcom Kona USB2 PHY Driver"
92	depends on HAS_IOMEM
93	select GENERIC_PHY
94	help
95	  Enable this to support the Broadcom Kona USB 2.0 PHY.
96
97config PHY_EXYNOS5250_SATA
98	tristate "Exynos5250 Sata SerDes/PHY driver"
99	depends on SOC_EXYNOS5250
100	depends on HAS_IOMEM
101	depends on OF
102	select GENERIC_PHY
103	select I2C
104	select I2C_S3C2410
105	select MFD_SYSCON
106	help
107	  Enable this to support SATA SerDes/Phy found on Samsung's
108	  Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
109	  SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
110	  port to accept one SATA device.
111
112config PHY_SUN4I_USB
113	tristate "Allwinner sunxi SoC USB PHY driver"
114	depends on ARCH_SUNXI && HAS_IOMEM && OF
115	select GENERIC_PHY
116	help
117	  Enable this to support the transceiver that is part of Allwinner
118	  sunxi SoCs.
119
120	  This driver controls the entire USB PHY block, both the USB OTG
121	  parts, as well as the 2 regular USB 2 host PHYs.
122
123config PHY_SAMSUNG_USB2
124	tristate "Samsung USB 2.0 PHY driver"
125	select GENERIC_PHY
126	select MFD_SYSCON
127	help
128	  Enable this to support the Samsung USB 2.0 PHY driver for Samsung
129	  SoCs. This driver provides the interface for USB 2.0 PHY. Support for
130	  particular SoCs has to be enabled in addition to this driver. Number
131	  and type of supported phys depends on the SoC.
132
133config PHY_EXYNOS4210_USB2
134	bool "Support for Exynos 4210"
135	depends on PHY_SAMSUNG_USB2
136	depends on CPU_EXYNOS4210
137	help
138	  Enable USB PHY support for Exynos 4210. This option requires that
139	  Samsung USB 2.0 PHY driver is enabled and means that support for this
140	  particular SoC is compiled in the driver. In case of Exynos 4210 four
141	  phys are available - device, host, HSIC0 and HSIC1.
142
143config PHY_EXYNOS4X12_USB2
144	bool "Support for Exynos 4x12"
145	depends on PHY_SAMSUNG_USB2
146	depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
147	help
148	  Enable USB PHY support for Exynos 4x12. This option requires that
149	  Samsung USB 2.0 PHY driver is enabled and means that support for this
150	  particular SoC is compiled in the driver. In case of Exynos 4x12 four
151	  phys are available - device, host, HSIC0 and HSIC1.
152
153config PHY_EXYNOS5250_USB2
154	bool "Support for Exynos 5250"
155	depends on PHY_SAMSUNG_USB2
156	depends on SOC_EXYNOS5250
157	help
158	  Enable USB PHY support for Exynos 5250. This option requires that
159	  Samsung USB 2.0 PHY driver is enabled and means that support for this
160	  particular SoC is compiled in the driver. In case of Exynos 5250 four
161	  phys are available - device, host, HSIC0 and HSIC.
162
163config PHY_EXYNOS5_USBDRD
164	tristate "Exynos5 SoC series USB DRD PHY driver"
165	depends on ARCH_EXYNOS5 && OF
166	depends on HAS_IOMEM
167	select GENERIC_PHY
168	select MFD_SYSCON
169	help
170	  Enable USB DRD PHY support for Exynos 5 SoC series.
171	  This driver provides PHY interface for USB 3.0 DRD controller
172	  present on Exynos5 SoC series.
173
174config PHY_XGENE
175	tristate "APM X-Gene 15Gbps PHY support"
176	depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
177	select GENERIC_PHY
178	help
179	  This option enables support for APM X-Gene SoC multi-purpose PHY.
180
181endmenu
182