1# 2# PHY 3# 4 5menu "PHY Subsystem" 6 7config GENERIC_PHY 8 bool "PHY Core" 9 help 10 Generic PHY support. 11 12 This framework is designed to provide a generic interface for PHY 13 devices present in the kernel. This layer will have the generic 14 API by which phy drivers can create PHY using the phy framework and 15 phy users can obtain reference to the PHY. All the users of this 16 framework should select this config. 17 18config PHY_BERLIN_USB 19 tristate "Marvell Berlin USB PHY Driver" 20 depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF 21 select GENERIC_PHY 22 help 23 Enable this to support the USB PHY on Marvell Berlin SoCs. 24 25config PHY_BERLIN_SATA 26 tristate "Marvell Berlin SATA PHY driver" 27 depends on ARCH_BERLIN && HAS_IOMEM && OF 28 select GENERIC_PHY 29 help 30 Enable this to support the SATA PHY on Marvell Berlin SoCs. 31 32config ARMADA375_USBCLUSTER_PHY 33 def_bool y 34 depends on MACH_ARMADA_375 || COMPILE_TEST 35 depends on OF 36 select GENERIC_PHY 37 38config PHY_EXYNOS_MIPI_VIDEO 39 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" 40 depends on HAS_IOMEM 41 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 42 select GENERIC_PHY 43 default y if ARCH_S5PV210 || ARCH_EXYNOS 44 help 45 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P 46 and EXYNOS SoCs. 47 48config PHY_MVEBU_SATA 49 def_bool y 50 depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD 51 depends on OF 52 select GENERIC_PHY 53 54config PHY_MIPHY28LP 55 tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" 56 depends on ARCH_STI 57 select GENERIC_PHY 58 help 59 Enable this to support the miphy transceiver (for SATA/PCIE/USB3) 60 that is part of STMicroelectronics STiH407 SoC. 61 62config PHY_MIPHY365X 63 tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" 64 depends on ARCH_STI 65 depends on HAS_IOMEM 66 depends on OF 67 select GENERIC_PHY 68 help 69 Enable this to support the miphy transceiver (for SATA/PCIE) 70 that is part of STMicroelectronics STiH41x SoC series. 71 72config PHY_RCAR_GEN2 73 tristate "Renesas R-Car generation 2 USB PHY driver" 74 depends on ARCH_SHMOBILE 75 depends on GENERIC_PHY 76 help 77 Support for USB PHY found on Renesas R-Car generation 2 SoCs. 78 79config OMAP_CONTROL_PHY 80 tristate "OMAP CONTROL PHY Driver" 81 depends on ARCH_OMAP2PLUS || COMPILE_TEST 82 help 83 Enable this to add support for the PHY part present in the control 84 module. This driver has API to power on the USB2 PHY and to write to 85 the mailbox. The mailbox is present only in omap4 and the register to 86 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an 87 additional register to power on USB3 PHY/SATA PHY/PCIE PHY 88 (PIPE3 PHY). 89 90config OMAP_USB2 91 tristate "OMAP USB2 PHY Driver" 92 depends on ARCH_OMAP2PLUS 93 depends on USB_PHY 94 select GENERIC_PHY 95 select OMAP_CONTROL_PHY 96 depends on OMAP_OCP2SCP 97 help 98 Enable this to support the transceiver that is part of SOC. This 99 driver takes care of all the PHY functionality apart from comparator. 100 The USB OTG controller communicates with the comparator using this 101 driver. 102 103config TI_PIPE3 104 tristate "TI PIPE3 PHY Driver" 105 depends on ARCH_OMAP2PLUS || COMPILE_TEST 106 select GENERIC_PHY 107 select OMAP_CONTROL_PHY 108 depends on OMAP_OCP2SCP 109 help 110 Enable this to support the PIPE3 PHY that is part of TI SOCs. This 111 driver takes care of all the PHY functionality apart from comparator. 112 This driver interacts with the "OMAP Control PHY Driver" to power 113 on/off the PHY. 114 115config TWL4030_USB 116 tristate "TWL4030 USB Transceiver Driver" 117 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS 118 depends on USB_PHY 119 select GENERIC_PHY 120 help 121 Enable this to support the USB OTG transceiver on TWL4030 122 family chips (including the TWL5030 and TPS659x0 devices). 123 This transceiver supports high and full speed devices plus, 124 in host mode, low speed. 125 126config PHY_EXYNOS_DP_VIDEO 127 tristate "EXYNOS SoC series Display Port PHY driver" 128 depends on OF 129 depends on ARCH_EXYNOS || COMPILE_TEST 130 default ARCH_EXYNOS 131 select GENERIC_PHY 132 help 133 Support for Display Port PHY found on Samsung EXYNOS SoCs. 134 135config BCM_KONA_USB2_PHY 136 tristate "Broadcom Kona USB2 PHY Driver" 137 depends on HAS_IOMEM 138 select GENERIC_PHY 139 help 140 Enable this to support the Broadcom Kona USB 2.0 PHY. 141 142config PHY_EXYNOS5250_SATA 143 tristate "Exynos5250 Sata SerDes/PHY driver" 144 depends on SOC_EXYNOS5250 145 depends on HAS_IOMEM 146 depends on OF 147 select GENERIC_PHY 148 select I2C 149 select I2C_S3C2410 150 select MFD_SYSCON 151 help 152 Enable this to support SATA SerDes/Phy found on Samsung's 153 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, 154 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host 155 port to accept one SATA device. 156 157config PHY_HIX5HD2_SATA 158 tristate "HIX5HD2 SATA PHY Driver" 159 depends on ARCH_HIX5HD2 && OF && HAS_IOMEM 160 select GENERIC_PHY 161 select MFD_SYSCON 162 help 163 Support for SATA PHY on Hisilicon hix5hd2 Soc. 164 165config PHY_SUN4I_USB 166 tristate "Allwinner sunxi SoC USB PHY driver" 167 depends on ARCH_SUNXI && HAS_IOMEM && OF 168 depends on RESET_CONTROLLER 169 select GENERIC_PHY 170 help 171 Enable this to support the transceiver that is part of Allwinner 172 sunxi SoCs. 173 174 This driver controls the entire USB PHY block, both the USB OTG 175 parts, as well as the 2 regular USB 2 host PHYs. 176 177config PHY_SAMSUNG_USB2 178 tristate "Samsung USB 2.0 PHY driver" 179 depends on HAS_IOMEM 180 depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 181 select GENERIC_PHY 182 select MFD_SYSCON 183 default ARCH_EXYNOS 184 help 185 Enable this to support the Samsung USB 2.0 PHY driver for Samsung 186 SoCs. This driver provides the interface for USB 2.0 PHY. Support 187 for particular PHYs will be enabled based on the SoC type in addition 188 to this driver. 189 190config PHY_S5PV210_USB2 191 bool "Support for S5PV210" 192 depends on PHY_SAMSUNG_USB2 193 depends on ARCH_S5PV210 194 help 195 Enable USB PHY support for S5PV210. This option requires that Samsung 196 USB 2.0 PHY driver is enabled and means that support for this 197 particular SoC is compiled in the driver. In case of S5PV210 two phys 198 are available - device and host. 199 200config PHY_EXYNOS4210_USB2 201 bool 202 depends on PHY_SAMSUNG_USB2 203 default CPU_EXYNOS4210 204 205config PHY_EXYNOS4X12_USB2 206 bool 207 depends on PHY_SAMSUNG_USB2 208 default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 209 210config PHY_EXYNOS5250_USB2 211 bool 212 depends on PHY_SAMSUNG_USB2 213 default SOC_EXYNOS5250 || SOC_EXYNOS5420 214 215config PHY_EXYNOS5_USBDRD 216 tristate "Exynos5 SoC series USB DRD PHY driver" 217 depends on ARCH_EXYNOS && OF 218 depends on HAS_IOMEM 219 depends on USB_DWC3_EXYNOS 220 select GENERIC_PHY 221 select MFD_SYSCON 222 default y 223 help 224 Enable USB DRD PHY support for Exynos 5 SoC series. 225 This driver provides PHY interface for USB 3.0 DRD controller 226 present on Exynos5 SoC series. 227 228config PHY_QCOM_APQ8064_SATA 229 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" 230 depends on ARCH_QCOM 231 depends on HAS_IOMEM 232 depends on OF 233 select GENERIC_PHY 234 235config PHY_QCOM_IPQ806X_SATA 236 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" 237 depends on ARCH_QCOM 238 depends on HAS_IOMEM 239 depends on OF 240 select GENERIC_PHY 241 242config PHY_ST_SPEAR1310_MIPHY 243 tristate "ST SPEAR1310-MIPHY driver" 244 select GENERIC_PHY 245 depends on MACH_SPEAR1310 || COMPILE_TEST 246 help 247 Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. 248 249config PHY_ST_SPEAR1340_MIPHY 250 tristate "ST SPEAR1340-MIPHY driver" 251 select GENERIC_PHY 252 depends on MACH_SPEAR1340 || COMPILE_TEST 253 help 254 Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. 255 256config PHY_XGENE 257 tristate "APM X-Gene 15Gbps PHY support" 258 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) 259 select GENERIC_PHY 260 help 261 This option enables support for APM X-Gene SoC multi-purpose PHY. 262 263config PHY_STIH407_USB 264 tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" 265 depends on RESET_CONTROLLER 266 depends on ARCH_STI || COMPILE_TEST 267 select GENERIC_PHY 268 help 269 Enable this support to enable the picoPHY device used by USB2 270 and USB3 controllers on STMicroelectronics STiH407 SoC families. 271 272config PHY_STIH41X_USB 273 tristate "STMicroelectronics USB2 PHY driver for STiH41x series" 274 depends on ARCH_STI 275 select GENERIC_PHY 276 help 277 Enable this to support the USB transceiver that is part of 278 STMicroelectronics STiH41x SoC series. 279 280endmenu 281