1# 2# PHY 3# 4 5menu "PHY Subsystem" 6 7config GENERIC_PHY 8 bool "PHY Core" 9 help 10 Generic PHY support. 11 12 This framework is designed to provide a generic interface for PHY 13 devices present in the kernel. This layer will have the generic 14 API by which phy drivers can create PHY using the phy framework and 15 phy users can obtain reference to the PHY. All the users of this 16 framework should select this config. 17 18config PHY_BCM_NS_USB2 19 tristate "Broadcom Northstar USB 2.0 PHY Driver" 20 depends on ARCH_BCM_IPROC || COMPILE_TEST 21 depends on HAS_IOMEM && OF 22 select GENERIC_PHY 23 help 24 Enable this to support Broadcom USB 2.0 PHY connected to the USB 25 controller on Northstar family. 26 27config PHY_BCM_NS_USB3 28 tristate "Broadcom Northstar USB 3.0 PHY Driver" 29 depends on ARCH_BCM_IPROC || COMPILE_TEST 30 depends on HAS_IOMEM && OF 31 select GENERIC_PHY 32 help 33 Enable this to support Broadcom USB 3.0 PHY connected to the USB 34 controller on Northstar family. 35 36config PHY_BERLIN_USB 37 tristate "Marvell Berlin USB PHY Driver" 38 depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF 39 select GENERIC_PHY 40 help 41 Enable this to support the USB PHY on Marvell Berlin SoCs. 42 43config PHY_BERLIN_SATA 44 tristate "Marvell Berlin SATA PHY driver" 45 depends on ARCH_BERLIN && HAS_IOMEM && OF 46 select GENERIC_PHY 47 help 48 Enable this to support the SATA PHY on Marvell Berlin SoCs. 49 50config ARMADA375_USBCLUSTER_PHY 51 def_bool y 52 depends on MACH_ARMADA_375 || COMPILE_TEST 53 depends on OF && HAS_IOMEM 54 select GENERIC_PHY 55 56config PHY_DA8XX_USB 57 tristate "TI DA8xx USB PHY Driver" 58 depends on ARCH_DAVINCI_DA8XX 59 select GENERIC_PHY 60 select MFD_SYSCON 61 help 62 Enable this to support the USB PHY on DA8xx SoCs. 63 64 This driver controls both the USB 1.1 PHY and the USB 2.0 PHY. 65 66config PHY_DM816X_USB 67 tristate "TI dm816x USB PHY driver" 68 depends on ARCH_OMAP2PLUS 69 depends on USB_SUPPORT 70 select GENERIC_PHY 71 select USB_PHY 72 help 73 Enable this for dm816x USB to work. 74 75config PHY_EXYNOS_MIPI_VIDEO 76 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" 77 depends on HAS_IOMEM 78 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 79 select GENERIC_PHY 80 default y if ARCH_S5PV210 || ARCH_EXYNOS 81 help 82 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P 83 and EXYNOS SoCs. 84 85config PHY_LPC18XX_USB_OTG 86 tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" 87 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 88 depends on MFD_SYSCON 89 select GENERIC_PHY 90 help 91 Enable this to support NXP LPC18xx/43xx internal USB OTG PHY. 92 93 This driver is need for USB0 support on LPC18xx/43xx and takes 94 care of enabling and clock setup. 95 96config PHY_PXA_28NM_HSIC 97 tristate "Marvell USB HSIC 28nm PHY Driver" 98 depends on HAS_IOMEM 99 select GENERIC_PHY 100 help 101 Enable this to support Marvell USB HSIC PHY driver for Marvell 102 SoC. This driver will do the PHY initialization and shutdown. 103 The PHY driver will be used by Marvell ehci driver. 104 105 To compile this driver as a module, choose M here. 106 107config PHY_PXA_28NM_USB2 108 tristate "Marvell USB 2.0 28nm PHY Driver" 109 depends on HAS_IOMEM 110 select GENERIC_PHY 111 help 112 Enable this to support Marvell USB 2.0 PHY driver for Marvell 113 SoC. This driver will do the PHY initialization and shutdown. 114 The PHY driver will be used by Marvell udc/ehci/otg driver. 115 116 To compile this driver as a module, choose M here. 117 118config PHY_MVEBU_SATA 119 def_bool y 120 depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD 121 depends on OF 122 select GENERIC_PHY 123 124config PHY_MIPHY28LP 125 tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" 126 depends on ARCH_STI 127 select GENERIC_PHY 128 help 129 Enable this to support the miphy transceiver (for SATA/PCIE/USB3) 130 that is part of STMicroelectronics STiH407 SoC. 131 132config PHY_RCAR_GEN2 133 tristate "Renesas R-Car generation 2 USB PHY driver" 134 depends on ARCH_RENESAS 135 depends on GENERIC_PHY 136 help 137 Support for USB PHY found on Renesas R-Car generation 2 SoCs. 138 139config PHY_RCAR_GEN3_USB2 140 tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" 141 depends on ARCH_RENESAS 142 depends on EXTCON 143 select GENERIC_PHY 144 help 145 Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. 146 147config OMAP_CONTROL_PHY 148 tristate "OMAP CONTROL PHY Driver" 149 depends on ARCH_OMAP2PLUS || COMPILE_TEST 150 help 151 Enable this to add support for the PHY part present in the control 152 module. This driver has API to power on the USB2 PHY and to write to 153 the mailbox. The mailbox is present only in omap4 and the register to 154 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an 155 additional register to power on USB3 PHY/SATA PHY/PCIE PHY 156 (PIPE3 PHY). 157 158config OMAP_USB2 159 tristate "OMAP USB2 PHY Driver" 160 depends on ARCH_OMAP2PLUS 161 depends on USB_SUPPORT 162 select GENERIC_PHY 163 select USB_PHY 164 select OMAP_CONTROL_PHY 165 depends on OMAP_OCP2SCP 166 help 167 Enable this to support the transceiver that is part of SOC. This 168 driver takes care of all the PHY functionality apart from comparator. 169 The USB OTG controller communicates with the comparator using this 170 driver. 171 172config TI_PIPE3 173 tristate "TI PIPE3 PHY Driver" 174 depends on ARCH_OMAP2PLUS || COMPILE_TEST 175 select GENERIC_PHY 176 select OMAP_CONTROL_PHY 177 depends on OMAP_OCP2SCP 178 help 179 Enable this to support the PIPE3 PHY that is part of TI SOCs. This 180 driver takes care of all the PHY functionality apart from comparator. 181 This driver interacts with the "OMAP Control PHY Driver" to power 182 on/off the PHY. 183 184config TWL4030_USB 185 tristate "TWL4030 USB Transceiver Driver" 186 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS 187 depends on USB_SUPPORT 188 depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y' 189 select GENERIC_PHY 190 select USB_PHY 191 help 192 Enable this to support the USB OTG transceiver on TWL4030 193 family chips (including the TWL5030 and TPS659x0 devices). 194 This transceiver supports high and full speed devices plus, 195 in host mode, low speed. 196 197config PHY_EXYNOS_DP_VIDEO 198 tristate "EXYNOS SoC series Display Port PHY driver" 199 depends on OF 200 depends on ARCH_EXYNOS || COMPILE_TEST 201 default ARCH_EXYNOS 202 select GENERIC_PHY 203 help 204 Support for Display Port PHY found on Samsung EXYNOS SoCs. 205 206config BCM_KONA_USB2_PHY 207 tristate "Broadcom Kona USB2 PHY Driver" 208 depends on HAS_IOMEM 209 select GENERIC_PHY 210 help 211 Enable this to support the Broadcom Kona USB 2.0 PHY. 212 213config PHY_EXYNOS5250_SATA 214 tristate "Exynos5250 Sata SerDes/PHY driver" 215 depends on SOC_EXYNOS5250 216 depends on HAS_IOMEM 217 depends on OF 218 select GENERIC_PHY 219 select I2C 220 select I2C_S3C2410 221 select MFD_SYSCON 222 help 223 Enable this to support SATA SerDes/Phy found on Samsung's 224 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, 225 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host 226 port to accept one SATA device. 227 228config PHY_HIX5HD2_SATA 229 tristate "HIX5HD2 SATA PHY Driver" 230 depends on ARCH_HIX5HD2 && OF && HAS_IOMEM 231 select GENERIC_PHY 232 select MFD_SYSCON 233 help 234 Support for SATA PHY on Hisilicon hix5hd2 Soc. 235 236config PHY_MT65XX_USB3 237 tristate "Mediatek USB3.0 PHY Driver" 238 depends on ARCH_MEDIATEK && OF 239 select GENERIC_PHY 240 help 241 Say 'Y' here to add support for Mediatek USB3.0 PHY driver, 242 it supports multiple usb2.0 and usb3.0 ports. 243 244config PHY_HI6220_USB 245 tristate "hi6220 USB PHY support" 246 depends on (ARCH_HISI && ARM64) || COMPILE_TEST 247 select GENERIC_PHY 248 select MFD_SYSCON 249 help 250 Enable this to support the HISILICON HI6220 USB PHY. 251 252 To compile this driver as a module, choose M here. 253 254config PHY_SUN4I_USB 255 tristate "Allwinner sunxi SoC USB PHY driver" 256 depends on ARCH_SUNXI && HAS_IOMEM && OF 257 depends on RESET_CONTROLLER 258 depends on EXTCON 259 depends on POWER_SUPPLY 260 depends on USB_SUPPORT 261 select GENERIC_PHY 262 select USB_COMMON 263 help 264 Enable this to support the transceiver that is part of Allwinner 265 sunxi SoCs. 266 267 This driver controls the entire USB PHY block, both the USB OTG 268 parts, as well as the 2 regular USB 2 host PHYs. 269 270config PHY_SUN9I_USB 271 tristate "Allwinner sun9i SoC USB PHY driver" 272 depends on ARCH_SUNXI && HAS_IOMEM && OF 273 depends on RESET_CONTROLLER 274 depends on USB_SUPPORT 275 select USB_COMMON 276 select GENERIC_PHY 277 help 278 Enable this to support the transceiver that is part of Allwinner 279 sun9i SoCs. 280 281 This driver controls each individual USB 2 host PHY. 282 283config PHY_SAMSUNG_USB2 284 tristate "Samsung USB 2.0 PHY driver" 285 depends on HAS_IOMEM 286 depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 287 select GENERIC_PHY 288 select MFD_SYSCON 289 default ARCH_EXYNOS 290 help 291 Enable this to support the Samsung USB 2.0 PHY driver for Samsung 292 SoCs. This driver provides the interface for USB 2.0 PHY. Support 293 for particular PHYs will be enabled based on the SoC type in addition 294 to this driver. 295 296config PHY_S5PV210_USB2 297 bool "Support for S5PV210" 298 depends on PHY_SAMSUNG_USB2 299 depends on ARCH_S5PV210 300 help 301 Enable USB PHY support for S5PV210. This option requires that Samsung 302 USB 2.0 PHY driver is enabled and means that support for this 303 particular SoC is compiled in the driver. In case of S5PV210 two phys 304 are available - device and host. 305 306config PHY_EXYNOS4210_USB2 307 bool 308 depends on PHY_SAMSUNG_USB2 309 default CPU_EXYNOS4210 310 311config PHY_EXYNOS4X12_USB2 312 bool 313 depends on PHY_SAMSUNG_USB2 314 default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 315 316config PHY_EXYNOS5250_USB2 317 bool 318 depends on PHY_SAMSUNG_USB2 319 default SOC_EXYNOS5250 || SOC_EXYNOS5420 320 321config PHY_EXYNOS5_USBDRD 322 tristate "Exynos5 SoC series USB DRD PHY driver" 323 depends on ARCH_EXYNOS && OF 324 depends on HAS_IOMEM 325 depends on USB_DWC3_EXYNOS 326 select GENERIC_PHY 327 select MFD_SYSCON 328 default y 329 help 330 Enable USB DRD PHY support for Exynos 5 SoC series. 331 This driver provides PHY interface for USB 3.0 DRD controller 332 present on Exynos5 SoC series. 333 334config PHY_EXYNOS_PCIE 335 bool "Exynos PCIe PHY driver" 336 depends on OF && (ARCH_EXYNOS || COMPILE_TEST) 337 select GENERIC_PHY 338 help 339 Enable PCIe PHY support for Exynos SoC series. 340 This driver provides PHY interface for Exynos PCIe controller. 341 342config PHY_PISTACHIO_USB 343 tristate "IMG Pistachio USB2.0 PHY driver" 344 depends on MACH_PISTACHIO 345 select GENERIC_PHY 346 help 347 Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. 348 349config PHY_QCOM_APQ8064_SATA 350 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" 351 depends on ARCH_QCOM 352 depends on HAS_IOMEM 353 depends on OF 354 select GENERIC_PHY 355 356config PHY_QCOM_IPQ806X_SATA 357 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" 358 depends on ARCH_QCOM 359 depends on HAS_IOMEM 360 depends on OF 361 select GENERIC_PHY 362 363config PHY_ROCKCHIP_USB 364 tristate "Rockchip USB2 PHY Driver" 365 depends on ARCH_ROCKCHIP && OF 366 select GENERIC_PHY 367 help 368 Enable this to support the Rockchip USB 2.0 PHY. 369 370config PHY_ROCKCHIP_INNO_USB2 371 tristate "Rockchip INNO USB2PHY Driver" 372 depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF 373 depends on COMMON_CLK 374 depends on EXTCON 375 depends on USB_SUPPORT 376 select GENERIC_PHY 377 select USB_COMMON 378 help 379 Support for Rockchip USB2.0 PHY with Innosilicon IP block. 380 381config PHY_ROCKCHIP_EMMC 382 tristate "Rockchip EMMC PHY Driver" 383 depends on ARCH_ROCKCHIP && OF 384 select GENERIC_PHY 385 help 386 Enable this to support the Rockchip EMMC PHY. 387 388config PHY_ROCKCHIP_DP 389 tristate "Rockchip Display Port PHY Driver" 390 depends on ARCH_ROCKCHIP && OF 391 select GENERIC_PHY 392 help 393 Enable this to support the Rockchip Display Port PHY. 394 395config PHY_ROCKCHIP_PCIE 396 tristate "Rockchip PCIe PHY Driver" 397 depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST 398 select GENERIC_PHY 399 select MFD_SYSCON 400 help 401 Enable this to support the Rockchip PCIe PHY. 402 403config PHY_ROCKCHIP_TYPEC 404 tristate "Rockchip TYPEC PHY Driver" 405 depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) 406 select EXTCON 407 select GENERIC_PHY 408 select RESET_CONTROLLER 409 help 410 Enable this to support the Rockchip USB TYPEC PHY. 411 412config PHY_ST_SPEAR1310_MIPHY 413 tristate "ST SPEAR1310-MIPHY driver" 414 select GENERIC_PHY 415 depends on MACH_SPEAR1310 || COMPILE_TEST 416 help 417 Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. 418 419config PHY_ST_SPEAR1340_MIPHY 420 tristate "ST SPEAR1340-MIPHY driver" 421 select GENERIC_PHY 422 depends on MACH_SPEAR1340 || COMPILE_TEST 423 help 424 Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. 425 426config PHY_XGENE 427 tristate "APM X-Gene 15Gbps PHY support" 428 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) 429 select GENERIC_PHY 430 help 431 This option enables support for APM X-Gene SoC multi-purpose PHY. 432 433config PHY_STIH407_USB 434 tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" 435 depends on RESET_CONTROLLER 436 depends on ARCH_STI || COMPILE_TEST 437 select GENERIC_PHY 438 help 439 Enable this support to enable the picoPHY device used by USB2 440 and USB3 controllers on STMicroelectronics STiH407 SoC families. 441 442config PHY_QCOM_UFS 443 tristate "Qualcomm UFS PHY driver" 444 depends on OF && ARCH_QCOM 445 select GENERIC_PHY 446 help 447 Support for UFS PHY on QCOM chipsets. 448 449config PHY_QCOM_USB_HS 450 tristate "Qualcomm USB HS PHY module" 451 depends on USB_ULPI_BUS 452 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 453 select GENERIC_PHY 454 help 455 Support for the USB high-speed ULPI compliant phy on Qualcomm 456 chipsets. 457 458config PHY_QCOM_USB_HSIC 459 tristate "Qualcomm USB HSIC ULPI PHY module" 460 depends on USB_ULPI_BUS 461 select GENERIC_PHY 462 help 463 Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. 464 465config PHY_TUSB1210 466 tristate "TI TUSB1210 ULPI PHY module" 467 depends on USB_ULPI_BUS 468 select GENERIC_PHY 469 help 470 Support for TI TUSB1210 USB ULPI PHY. 471 472config PHY_BRCM_SATA 473 tristate "Broadcom SATA PHY driver" 474 depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST 475 depends on OF 476 select GENERIC_PHY 477 default ARCH_BCM_IPROC 478 help 479 Enable this to support the Broadcom SATA PHY. 480 If unsure, say N. 481 482config PHY_CYGNUS_PCIE 483 tristate "Broadcom Cygnus PCIe PHY driver" 484 depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) 485 select GENERIC_PHY 486 default ARCH_BCM_CYGNUS 487 help 488 Enable this to support the Broadcom Cygnus PCIe PHY. 489 If unsure, say N. 490 491source "drivers/phy/tegra/Kconfig" 492 493config PHY_NS2_PCIE 494 tristate "Broadcom Northstar2 PCIe PHY driver" 495 depends on OF && MDIO_BUS_MUX_BCM_IPROC 496 select GENERIC_PHY 497 default ARCH_BCM_IPROC 498 help 499 Enable this to support the Broadcom Northstar2 PCIe PHY. 500 If unsure, say N. 501 502config PHY_MESON8B_USB2 503 tristate "Meson8b and GXBB USB2 PHY driver" 504 default ARCH_MESON 505 depends on OF && (ARCH_MESON || COMPILE_TEST) 506 depends on USB_SUPPORT 507 select USB_COMMON 508 select GENERIC_PHY 509 help 510 Enable this to support the Meson USB2 PHYs found in Meson8b 511 and GXBB SoCs. 512 If unsure, say N. 513 514endmenu 515