1# 2# PHY 3# 4 5menu "PHY Subsystem" 6 7config GENERIC_PHY 8 bool "PHY Core" 9 help 10 Generic PHY support. 11 12 This framework is designed to provide a generic interface for PHY 13 devices present in the kernel. This layer will have the generic 14 API by which phy drivers can create PHY using the phy framework and 15 phy users can obtain reference to the PHY. All the users of this 16 framework should select this config. 17 18config PHY_BERLIN_USB 19 tristate "Marvell Berlin USB PHY Driver" 20 depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF 21 select GENERIC_PHY 22 help 23 Enable this to support the USB PHY on Marvell Berlin SoCs. 24 25config PHY_BERLIN_SATA 26 tristate "Marvell Berlin SATA PHY driver" 27 depends on ARCH_BERLIN && HAS_IOMEM && OF 28 select GENERIC_PHY 29 help 30 Enable this to support the SATA PHY on Marvell Berlin SoCs. 31 32config ARMADA375_USBCLUSTER_PHY 33 def_bool y 34 depends on MACH_ARMADA_375 || COMPILE_TEST 35 depends on OF 36 select GENERIC_PHY 37 38config PHY_DM816X_USB 39 tristate "TI dm816x USB PHY driver" 40 depends on ARCH_OMAP2PLUS 41 depends on USB_SUPPORT 42 select GENERIC_PHY 43 select USB_PHY 44 help 45 Enable this for dm816x USB to work. 46 47config PHY_EXYNOS_MIPI_VIDEO 48 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" 49 depends on HAS_IOMEM 50 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 51 select GENERIC_PHY 52 default y if ARCH_S5PV210 || ARCH_EXYNOS 53 help 54 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P 55 and EXYNOS SoCs. 56 57config PHY_LPC18XX_USB_OTG 58 tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" 59 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 60 depends on MFD_SYSCON 61 select GENERIC_PHY 62 help 63 Enable this to support NXP LPC18xx/43xx internal USB OTG PHY. 64 65 This driver is need for USB0 support on LPC18xx/43xx and takes 66 care of enabling and clock setup. 67 68config PHY_PXA_28NM_HSIC 69 tristate "Marvell USB HSIC 28nm PHY Driver" 70 depends on HAS_IOMEM 71 select GENERIC_PHY 72 help 73 Enable this to support Marvell USB HSIC PHY driver for Marvell 74 SoC. This driver will do the PHY initialization and shutdown. 75 The PHY driver will be used by Marvell ehci driver. 76 77 To compile this driver as a module, choose M here. 78 79config PHY_PXA_28NM_USB2 80 tristate "Marvell USB 2.0 28nm PHY Driver" 81 depends on HAS_IOMEM 82 select GENERIC_PHY 83 help 84 Enable this to support Marvell USB 2.0 PHY driver for Marvell 85 SoC. This driver will do the PHY initialization and shutdown. 86 The PHY driver will be used by Marvell udc/ehci/otg driver. 87 88 To compile this driver as a module, choose M here. 89 90config PHY_MVEBU_SATA 91 def_bool y 92 depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD 93 depends on OF 94 select GENERIC_PHY 95 96config PHY_MIPHY28LP 97 tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" 98 depends on ARCH_STI 99 select GENERIC_PHY 100 help 101 Enable this to support the miphy transceiver (for SATA/PCIE/USB3) 102 that is part of STMicroelectronics STiH407 SoC. 103 104config PHY_MIPHY365X 105 tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" 106 depends on ARCH_STI 107 depends on HAS_IOMEM 108 depends on OF 109 select GENERIC_PHY 110 help 111 Enable this to support the miphy transceiver (for SATA/PCIE) 112 that is part of STMicroelectronics STiH41x SoC series. 113 114config PHY_RCAR_GEN2 115 tristate "Renesas R-Car generation 2 USB PHY driver" 116 depends on ARCH_SHMOBILE 117 depends on GENERIC_PHY 118 help 119 Support for USB PHY found on Renesas R-Car generation 2 SoCs. 120 121config PHY_RCAR_GEN3_USB2 122 tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" 123 depends on OF && ARCH_SHMOBILE 124 select GENERIC_PHY 125 help 126 Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. 127 128config OMAP_CONTROL_PHY 129 tristate "OMAP CONTROL PHY Driver" 130 depends on ARCH_OMAP2PLUS || COMPILE_TEST 131 help 132 Enable this to add support for the PHY part present in the control 133 module. This driver has API to power on the USB2 PHY and to write to 134 the mailbox. The mailbox is present only in omap4 and the register to 135 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an 136 additional register to power on USB3 PHY/SATA PHY/PCIE PHY 137 (PIPE3 PHY). 138 139config OMAP_USB2 140 tristate "OMAP USB2 PHY Driver" 141 depends on ARCH_OMAP2PLUS 142 depends on USB_SUPPORT 143 select GENERIC_PHY 144 select USB_PHY 145 select OMAP_CONTROL_PHY 146 depends on OMAP_OCP2SCP 147 help 148 Enable this to support the transceiver that is part of SOC. This 149 driver takes care of all the PHY functionality apart from comparator. 150 The USB OTG controller communicates with the comparator using this 151 driver. 152 153config TI_PIPE3 154 tristate "TI PIPE3 PHY Driver" 155 depends on ARCH_OMAP2PLUS || COMPILE_TEST 156 select GENERIC_PHY 157 select OMAP_CONTROL_PHY 158 depends on OMAP_OCP2SCP 159 help 160 Enable this to support the PIPE3 PHY that is part of TI SOCs. This 161 driver takes care of all the PHY functionality apart from comparator. 162 This driver interacts with the "OMAP Control PHY Driver" to power 163 on/off the PHY. 164 165config TWL4030_USB 166 tristate "TWL4030 USB Transceiver Driver" 167 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS 168 depends on USB_SUPPORT 169 select GENERIC_PHY 170 select USB_PHY 171 help 172 Enable this to support the USB OTG transceiver on TWL4030 173 family chips (including the TWL5030 and TPS659x0 devices). 174 This transceiver supports high and full speed devices plus, 175 in host mode, low speed. 176 177config PHY_EXYNOS_DP_VIDEO 178 tristate "EXYNOS SoC series Display Port PHY driver" 179 depends on OF 180 depends on ARCH_EXYNOS || COMPILE_TEST 181 default ARCH_EXYNOS 182 select GENERIC_PHY 183 help 184 Support for Display Port PHY found on Samsung EXYNOS SoCs. 185 186config BCM_KONA_USB2_PHY 187 tristate "Broadcom Kona USB2 PHY Driver" 188 depends on HAS_IOMEM 189 select GENERIC_PHY 190 help 191 Enable this to support the Broadcom Kona USB 2.0 PHY. 192 193config PHY_EXYNOS5250_SATA 194 tristate "Exynos5250 Sata SerDes/PHY driver" 195 depends on SOC_EXYNOS5250 196 depends on HAS_IOMEM 197 depends on OF 198 select GENERIC_PHY 199 select I2C 200 select I2C_S3C2410 201 select MFD_SYSCON 202 help 203 Enable this to support SATA SerDes/Phy found on Samsung's 204 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, 205 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host 206 port to accept one SATA device. 207 208config PHY_HIX5HD2_SATA 209 tristate "HIX5HD2 SATA PHY Driver" 210 depends on ARCH_HIX5HD2 && OF && HAS_IOMEM 211 select GENERIC_PHY 212 select MFD_SYSCON 213 help 214 Support for SATA PHY on Hisilicon hix5hd2 Soc. 215 216config PHY_MT65XX_USB3 217 tristate "Mediatek USB3.0 PHY Driver" 218 depends on ARCH_MEDIATEK && OF 219 select GENERIC_PHY 220 help 221 Say 'Y' here to add support for Mediatek USB3.0 PHY driver 222 for mt65xx SoCs. it supports two usb2.0 ports and 223 one usb3.0 port. 224 225config PHY_HI6220_USB 226 tristate "hi6220 USB PHY support" 227 select GENERIC_PHY 228 select MFD_SYSCON 229 help 230 Enable this to support the HISILICON HI6220 USB PHY. 231 232 To compile this driver as a module, choose M here. 233 234config PHY_SUN4I_USB 235 tristate "Allwinner sunxi SoC USB PHY driver" 236 depends on ARCH_SUNXI && HAS_IOMEM && OF 237 depends on RESET_CONTROLLER 238 depends on EXTCON 239 depends on POWER_SUPPLY 240 select GENERIC_PHY 241 help 242 Enable this to support the transceiver that is part of Allwinner 243 sunxi SoCs. 244 245 This driver controls the entire USB PHY block, both the USB OTG 246 parts, as well as the 2 regular USB 2 host PHYs. 247 248config PHY_SUN9I_USB 249 tristate "Allwinner sun9i SoC USB PHY driver" 250 depends on ARCH_SUNXI && HAS_IOMEM && OF 251 depends on RESET_CONTROLLER 252 depends on USB_COMMON 253 select GENERIC_PHY 254 help 255 Enable this to support the transceiver that is part of Allwinner 256 sun9i SoCs. 257 258 This driver controls each individual USB 2 host PHY. 259 260config PHY_SAMSUNG_USB2 261 tristate "Samsung USB 2.0 PHY driver" 262 depends on HAS_IOMEM 263 depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 264 select GENERIC_PHY 265 select MFD_SYSCON 266 default ARCH_EXYNOS 267 help 268 Enable this to support the Samsung USB 2.0 PHY driver for Samsung 269 SoCs. This driver provides the interface for USB 2.0 PHY. Support 270 for particular PHYs will be enabled based on the SoC type in addition 271 to this driver. 272 273config PHY_S5PV210_USB2 274 bool "Support for S5PV210" 275 depends on PHY_SAMSUNG_USB2 276 depends on ARCH_S5PV210 277 help 278 Enable USB PHY support for S5PV210. This option requires that Samsung 279 USB 2.0 PHY driver is enabled and means that support for this 280 particular SoC is compiled in the driver. In case of S5PV210 two phys 281 are available - device and host. 282 283config PHY_EXYNOS4210_USB2 284 bool 285 depends on PHY_SAMSUNG_USB2 286 default CPU_EXYNOS4210 287 288config PHY_EXYNOS4X12_USB2 289 bool 290 depends on PHY_SAMSUNG_USB2 291 default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 292 293config PHY_EXYNOS5250_USB2 294 bool 295 depends on PHY_SAMSUNG_USB2 296 default SOC_EXYNOS5250 || SOC_EXYNOS5420 297 298config PHY_EXYNOS5_USBDRD 299 tristate "Exynos5 SoC series USB DRD PHY driver" 300 depends on ARCH_EXYNOS && OF 301 depends on HAS_IOMEM 302 depends on USB_DWC3_EXYNOS 303 select GENERIC_PHY 304 select MFD_SYSCON 305 default y 306 help 307 Enable USB DRD PHY support for Exynos 5 SoC series. 308 This driver provides PHY interface for USB 3.0 DRD controller 309 present on Exynos5 SoC series. 310 311config PHY_PISTACHIO_USB 312 tristate "IMG Pistachio USB2.0 PHY driver" 313 depends on MACH_PISTACHIO 314 select GENERIC_PHY 315 help 316 Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. 317 318config PHY_QCOM_APQ8064_SATA 319 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" 320 depends on ARCH_QCOM 321 depends on HAS_IOMEM 322 depends on OF 323 select GENERIC_PHY 324 325config PHY_QCOM_IPQ806X_SATA 326 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" 327 depends on ARCH_QCOM 328 depends on HAS_IOMEM 329 depends on OF 330 select GENERIC_PHY 331 332config PHY_ROCKCHIP_USB 333 tristate "Rockchip USB2 PHY Driver" 334 depends on ARCH_ROCKCHIP && OF 335 select GENERIC_PHY 336 help 337 Enable this to support the Rockchip USB 2.0 PHY. 338 339config PHY_ST_SPEAR1310_MIPHY 340 tristate "ST SPEAR1310-MIPHY driver" 341 select GENERIC_PHY 342 depends on MACH_SPEAR1310 || COMPILE_TEST 343 help 344 Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. 345 346config PHY_ST_SPEAR1340_MIPHY 347 tristate "ST SPEAR1340-MIPHY driver" 348 select GENERIC_PHY 349 depends on MACH_SPEAR1340 || COMPILE_TEST 350 help 351 Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. 352 353config PHY_XGENE 354 tristate "APM X-Gene 15Gbps PHY support" 355 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) 356 select GENERIC_PHY 357 help 358 This option enables support for APM X-Gene SoC multi-purpose PHY. 359 360config PHY_STIH407_USB 361 tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" 362 depends on RESET_CONTROLLER 363 depends on ARCH_STI || COMPILE_TEST 364 select GENERIC_PHY 365 help 366 Enable this support to enable the picoPHY device used by USB2 367 and USB3 controllers on STMicroelectronics STiH407 SoC families. 368 369config PHY_STIH41X_USB 370 tristate "STMicroelectronics USB2 PHY driver for STiH41x series" 371 depends on ARCH_STI 372 select GENERIC_PHY 373 help 374 Enable this to support the USB transceiver that is part of 375 STMicroelectronics STiH41x SoC series. 376 377config PHY_QCOM_UFS 378 tristate "Qualcomm UFS PHY driver" 379 depends on OF && ARCH_QCOM 380 select GENERIC_PHY 381 help 382 Support for UFS PHY on QCOM chipsets. 383 384config PHY_TUSB1210 385 tristate "TI TUSB1210 ULPI PHY module" 386 depends on USB_ULPI_BUS 387 select GENERIC_PHY 388 help 389 Support for TI TUSB1210 USB ULPI PHY. 390 391config PHY_BRCMSTB_SATA 392 tristate "Broadcom STB SATA PHY driver" 393 depends on ARCH_BRCMSTB || BMIPS_GENERIC 394 depends on OF 395 select GENERIC_PHY 396 help 397 Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs. 398 Likely useful only with CONFIG_SATA_BRCMSTB enabled. 399 400config PHY_CYGNUS_PCIE 401 tristate "Broadcom Cygnus PCIe PHY driver" 402 depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) 403 select GENERIC_PHY 404 default ARCH_BCM_CYGNUS 405 help 406 Enable this to support the Broadcom Cygnus PCIe PHY. 407 If unsure, say N. 408 409endmenu 410