xref: /openbmc/linux/drivers/pcmcia/yenta_socket.c (revision e5242c5f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Regular cardbus driver ("yenta_socket")
4  *
5  * (C) Copyright 1999, 2000 Linus Torvalds
6  *
7  * Changelog:
8  * Aug 2002: Manfred Spraul <manfred@colorfullife.com>
9  * 	Dynamically adjust the size of the bridge resource
10  *
11  * May 2003: Dominik Brodowski <linux@brodo.de>
12  * 	Merge pci_socket.c and yenta.c into one file
13  */
14 #include <linux/init.h>
15 #include <linux/pci.h>
16 #include <linux/workqueue.h>
17 #include <linux/interrupt.h>
18 #include <linux/delay.h>
19 #include <linux/module.h>
20 #include <linux/io.h>
21 #include <linux/slab.h>
22 
23 #include <pcmcia/ss.h>
24 
25 #include "yenta_socket.h"
26 #include "i82365.h"
27 
28 static bool disable_clkrun;
29 module_param(disable_clkrun, bool, 0444);
30 MODULE_PARM_DESC(disable_clkrun,
31 		 "If PC card doesn't function properly, please try this option (TI and Ricoh bridges only)");
32 
33 static bool isa_probe = 1;
34 module_param(isa_probe, bool, 0444);
35 MODULE_PARM_DESC(isa_probe, "If set ISA interrupts are probed (default). Set to N to disable probing");
36 
37 static bool pwr_irqs_off;
38 module_param(pwr_irqs_off, bool, 0644);
39 MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!");
40 
41 static char o2_speedup[] = "default";
42 module_param_string(o2_speedup, o2_speedup, sizeof(o2_speedup), 0444);
43 MODULE_PARM_DESC(o2_speedup, "Use prefetch/burst for O2-bridges: 'on', 'off' "
44 	"or 'default' (uses recommended behaviour for the detected bridge)");
45 
46 /*
47  * Only probe "regular" interrupts, don't
48  * touch dangerous spots like the mouse irq,
49  * because there are mice that apparently
50  * get really confused if they get fondled
51  * too intimately.
52  *
53  * Default to 11, 10, 9, 7, 6, 5, 4, 3.
54  */
55 static u32 isa_interrupts = 0x0ef8;
56 
57 
58 #define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args)
59 
60 /* Don't ask.. */
61 #define to_cycles(ns)	((ns)/120)
62 #define to_ns(cycles)	((cycles)*120)
63 
64 /*
65  * yenta PCI irq probing.
66  * currently only used in the TI/EnE initialization code
67  */
68 #ifdef CONFIG_YENTA_TI
69 static int yenta_probe_cb_irq(struct yenta_socket *socket);
70 static unsigned int yenta_probe_irq(struct yenta_socket *socket,
71 				u32 isa_irq_mask);
72 #endif
73 
74 
75 static unsigned int override_bios;
76 module_param(override_bios, uint, 0000);
77 MODULE_PARM_DESC(override_bios, "yenta ignore bios resource allocation");
78 
79 /*
80  * Generate easy-to-use ways of reading a cardbus sockets
81  * regular memory space ("cb_xxx"), configuration space
82  * ("config_xxx") and compatibility space ("exca_xxxx")
83  */
84 static inline u32 cb_readl(struct yenta_socket *socket, unsigned reg)
85 {
86 	u32 val = readl(socket->base + reg);
87 	debug("%04x %08x\n", socket, reg, val);
88 	return val;
89 }
90 
91 static inline void cb_writel(struct yenta_socket *socket, unsigned reg, u32 val)
92 {
93 	debug("%04x %08x\n", socket, reg, val);
94 	writel(val, socket->base + reg);
95 	readl(socket->base + reg); /* avoid problems with PCI write posting */
96 }
97 
98 static inline u8 config_readb(struct yenta_socket *socket, unsigned offset)
99 {
100 	u8 val;
101 	pci_read_config_byte(socket->dev, offset, &val);
102 	debug("%04x %02x\n", socket, offset, val);
103 	return val;
104 }
105 
106 static inline u16 config_readw(struct yenta_socket *socket, unsigned offset)
107 {
108 	u16 val;
109 	pci_read_config_word(socket->dev, offset, &val);
110 	debug("%04x %04x\n", socket, offset, val);
111 	return val;
112 }
113 
114 static inline u32 config_readl(struct yenta_socket *socket, unsigned offset)
115 {
116 	u32 val;
117 	pci_read_config_dword(socket->dev, offset, &val);
118 	debug("%04x %08x\n", socket, offset, val);
119 	return val;
120 }
121 
122 static inline void config_writeb(struct yenta_socket *socket, unsigned offset, u8 val)
123 {
124 	debug("%04x %02x\n", socket, offset, val);
125 	pci_write_config_byte(socket->dev, offset, val);
126 }
127 
128 static inline void config_writew(struct yenta_socket *socket, unsigned offset, u16 val)
129 {
130 	debug("%04x %04x\n", socket, offset, val);
131 	pci_write_config_word(socket->dev, offset, val);
132 }
133 
134 static inline void config_writel(struct yenta_socket *socket, unsigned offset, u32 val)
135 {
136 	debug("%04x %08x\n", socket, offset, val);
137 	pci_write_config_dword(socket->dev, offset, val);
138 }
139 
140 static inline u8 exca_readb(struct yenta_socket *socket, unsigned reg)
141 {
142 	u8 val = readb(socket->base + 0x800 + reg);
143 	debug("%04x %02x\n", socket, reg, val);
144 	return val;
145 }
146 
147 /*
148 static inline u8 exca_readw(struct yenta_socket *socket, unsigned reg)
149 {
150 	u16 val;
151 	val = readb(socket->base + 0x800 + reg);
152 	val |= readb(socket->base + 0x800 + reg + 1) << 8;
153 	debug("%04x %04x\n", socket, reg, val);
154 	return val;
155 }
156 */
157 
158 static inline void exca_writeb(struct yenta_socket *socket, unsigned reg, u8 val)
159 {
160 	debug("%04x %02x\n", socket, reg, val);
161 	writeb(val, socket->base + 0x800 + reg);
162 	readb(socket->base + 0x800 + reg); /* PCI write posting... */
163 }
164 
165 static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val)
166 {
167 	debug("%04x %04x\n", socket, reg, val);
168 	writeb(val, socket->base + 0x800 + reg);
169 	writeb(val >> 8, socket->base + 0x800 + reg + 1);
170 
171 	/* PCI write posting... */
172 	readb(socket->base + 0x800 + reg);
173 	readb(socket->base + 0x800 + reg + 1);
174 }
175 
176 static ssize_t show_yenta_registers(struct device *yentadev, struct device_attribute *attr, char *buf)
177 {
178 	struct yenta_socket *socket = dev_get_drvdata(yentadev);
179 	int offset = 0, i;
180 
181 	offset = sysfs_emit(buf, "CB registers:");
182 	for (i = 0; i < 0x24; i += 4) {
183 		unsigned val;
184 		if (!(i & 15))
185 			offset += sysfs_emit_at(buf, offset, "\n%02x:", i);
186 		val = cb_readl(socket, i);
187 		offset += sysfs_emit_at(buf, offset, " %08x", val);
188 	}
189 
190 	offset += sysfs_emit_at(buf, offset, "\n\nExCA registers:");
191 	for (i = 0; i < 0x45; i++) {
192 		unsigned char val;
193 		if (!(i & 7)) {
194 			if (i & 8) {
195 				memcpy(buf + offset, " -", 2);
196 				offset += 2;
197 			} else
198 				offset += sysfs_emit_at(buf, offset, "\n%02x:", i);
199 		}
200 		val = exca_readb(socket, i);
201 		offset += sysfs_emit_at(buf, offset, " %02x", val);
202 	}
203 	sysfs_emit_at(buf, offset, "\n");
204 	return offset;
205 }
206 
207 static DEVICE_ATTR(yenta_registers, S_IRUSR, show_yenta_registers, NULL);
208 
209 /*
210  * Ugh, mixed-mode cardbus and 16-bit pccard state: things depend
211  * on what kind of card is inserted..
212  */
213 static int yenta_get_status(struct pcmcia_socket *sock, unsigned int *value)
214 {
215 	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
216 	unsigned int val;
217 	u32 state = cb_readl(socket, CB_SOCKET_STATE);
218 
219 	val  = (state & CB_3VCARD) ? SS_3VCARD : 0;
220 	val |= (state & CB_XVCARD) ? SS_XVCARD : 0;
221 	val |= (state & (CB_5VCARD | CB_3VCARD | CB_XVCARD | CB_YVCARD)) ? 0 : SS_PENDING;
222 	val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? SS_PENDING : 0;
223 
224 
225 	if (state & CB_CBCARD) {
226 		val |= SS_CARDBUS;
227 		val |= (state & CB_CARDSTS) ? SS_STSCHG : 0;
228 		val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT;
229 		val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0;
230 	} else if (state & CB_16BITCARD) {
231 		u8 status = exca_readb(socket, I365_STATUS);
232 		val |= ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
233 		if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) {
234 			val |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG;
235 		} else {
236 			val |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD;
237 			val |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN;
238 		}
239 		val |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0;
240 		val |= (status & I365_CS_READY) ? SS_READY : 0;
241 		val |= (status & I365_CS_POWERON) ? SS_POWERON : 0;
242 	}
243 
244 	*value = val;
245 	return 0;
246 }
247 
248 static void yenta_set_power(struct yenta_socket *socket, socket_state_t *state)
249 {
250 	/* some birdges require to use the ExCA registers to power 16bit cards */
251 	if (!(cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) &&
252 	    (socket->flags & YENTA_16BIT_POWER_EXCA)) {
253 		u8 reg, old;
254 		reg = old = exca_readb(socket, I365_POWER);
255 		reg &= ~(I365_VCC_MASK | I365_VPP1_MASK | I365_VPP2_MASK);
256 
257 		/* i82365SL-DF style */
258 		if (socket->flags & YENTA_16BIT_POWER_DF) {
259 			switch (state->Vcc) {
260 			case 33:
261 				reg |= I365_VCC_3V;
262 				break;
263 			case 50:
264 				reg |= I365_VCC_5V;
265 				break;
266 			default:
267 				reg = 0;
268 				break;
269 			}
270 			switch (state->Vpp) {
271 			case 33:
272 			case 50:
273 				reg |= I365_VPP1_5V;
274 				break;
275 			case 120:
276 				reg |= I365_VPP1_12V;
277 				break;
278 			}
279 		} else {
280 			/* i82365SL-B style */
281 			switch (state->Vcc) {
282 			case 50:
283 				reg |= I365_VCC_5V;
284 				break;
285 			default:
286 				reg = 0;
287 				break;
288 			}
289 			switch (state->Vpp) {
290 			case 50:
291 				reg |= I365_VPP1_5V | I365_VPP2_5V;
292 				break;
293 			case 120:
294 				reg |= I365_VPP1_12V | I365_VPP2_12V;
295 				break;
296 			}
297 		}
298 
299 		if (reg != old)
300 			exca_writeb(socket, I365_POWER, reg);
301 	} else {
302 		u32 reg = 0;	/* CB_SC_STPCLK? */
303 		switch (state->Vcc) {
304 		case 33:
305 			reg = CB_SC_VCC_3V;
306 			break;
307 		case 50:
308 			reg = CB_SC_VCC_5V;
309 			break;
310 		default:
311 			reg = 0;
312 			break;
313 		}
314 		switch (state->Vpp) {
315 		case 33:
316 			reg |= CB_SC_VPP_3V;
317 			break;
318 		case 50:
319 			reg |= CB_SC_VPP_5V;
320 			break;
321 		case 120:
322 			reg |= CB_SC_VPP_12V;
323 			break;
324 		}
325 		if (reg != cb_readl(socket, CB_SOCKET_CONTROL))
326 			cb_writel(socket, CB_SOCKET_CONTROL, reg);
327 	}
328 }
329 
330 static int yenta_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
331 {
332 	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
333 	u16 bridge;
334 
335 	/* if powering down: do it immediately */
336 	if (state->Vcc == 0)
337 		yenta_set_power(socket, state);
338 
339 	socket->io_irq = state->io_irq;
340 	bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~(CB_BRIDGE_CRST | CB_BRIDGE_INTR);
341 	if (cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) {
342 		u8 intr;
343 		bridge |= (state->flags & SS_RESET) ? CB_BRIDGE_CRST : 0;
344 
345 		/* ISA interrupt control? */
346 		intr = exca_readb(socket, I365_INTCTL);
347 		intr = (intr & ~0xf);
348 		if (!socket->dev->irq) {
349 			intr |= socket->cb_irq ? socket->cb_irq : state->io_irq;
350 			bridge |= CB_BRIDGE_INTR;
351 		}
352 		exca_writeb(socket, I365_INTCTL, intr);
353 	}  else {
354 		u8 reg;
355 
356 		reg = exca_readb(socket, I365_INTCTL) & (I365_RING_ENA | I365_INTR_ENA);
357 		reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET;
358 		reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
359 		if (state->io_irq != socket->dev->irq) {
360 			reg |= state->io_irq;
361 			bridge |= CB_BRIDGE_INTR;
362 		}
363 		exca_writeb(socket, I365_INTCTL, reg);
364 
365 		reg = exca_readb(socket, I365_POWER) & (I365_VCC_MASK|I365_VPP1_MASK);
366 		reg |= I365_PWR_NORESET;
367 		if (state->flags & SS_PWR_AUTO)
368 			reg |= I365_PWR_AUTO;
369 		if (state->flags & SS_OUTPUT_ENA)
370 			reg |= I365_PWR_OUT;
371 		if (exca_readb(socket, I365_POWER) != reg)
372 			exca_writeb(socket, I365_POWER, reg);
373 
374 		/* CSC interrupt: no ISA irq for CSC */
375 		reg = exca_readb(socket, I365_CSCINT);
376 		reg &= I365_CSC_IRQ_MASK;
377 		reg |= I365_CSC_DETECT;
378 		if (state->flags & SS_IOCARD) {
379 			if (state->csc_mask & SS_STSCHG)
380 				reg |= I365_CSC_STSCHG;
381 		} else {
382 			if (state->csc_mask & SS_BATDEAD)
383 				reg |= I365_CSC_BVD1;
384 			if (state->csc_mask & SS_BATWARN)
385 				reg |= I365_CSC_BVD2;
386 			if (state->csc_mask & SS_READY)
387 				reg |= I365_CSC_READY;
388 		}
389 		exca_writeb(socket, I365_CSCINT, reg);
390 		exca_readb(socket, I365_CSC);
391 		if (sock->zoom_video)
392 			sock->zoom_video(sock, state->flags & SS_ZVCARD);
393 	}
394 	config_writew(socket, CB_BRIDGE_CONTROL, bridge);
395 	/* Socket event mask: get card insert/remove events.. */
396 	cb_writel(socket, CB_SOCKET_EVENT, -1);
397 	cb_writel(socket, CB_SOCKET_MASK, CB_CDMASK);
398 
399 	/* if powering up: do it as the last step when the socket is configured */
400 	if (state->Vcc != 0)
401 		yenta_set_power(socket, state);
402 	return 0;
403 }
404 
405 static int yenta_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
406 {
407 	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
408 	int map;
409 	unsigned char ioctl, addr, enable;
410 
411 	map = io->map;
412 
413 	if (map > 1)
414 		return -EINVAL;
415 
416 	enable = I365_ENA_IO(map);
417 	addr = exca_readb(socket, I365_ADDRWIN);
418 
419 	/* Disable the window before changing it.. */
420 	if (addr & enable) {
421 		addr &= ~enable;
422 		exca_writeb(socket, I365_ADDRWIN, addr);
423 	}
424 
425 	exca_writew(socket, I365_IO(map)+I365_W_START, io->start);
426 	exca_writew(socket, I365_IO(map)+I365_W_STOP, io->stop);
427 
428 	ioctl = exca_readb(socket, I365_IOCTL) & ~I365_IOCTL_MASK(map);
429 	if (io->flags & MAP_0WS)
430 		ioctl |= I365_IOCTL_0WS(map);
431 	if (io->flags & MAP_16BIT)
432 		ioctl |= I365_IOCTL_16BIT(map);
433 	if (io->flags & MAP_AUTOSZ)
434 		ioctl |= I365_IOCTL_IOCS16(map);
435 	exca_writeb(socket, I365_IOCTL, ioctl);
436 
437 	if (io->flags & MAP_ACTIVE)
438 		exca_writeb(socket, I365_ADDRWIN, addr | enable);
439 	return 0;
440 }
441 
442 static int yenta_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *mem)
443 {
444 	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
445 	struct pci_bus_region region;
446 	int map;
447 	unsigned char addr, enable;
448 	unsigned int start, stop, card_start;
449 	unsigned short word;
450 
451 	pcibios_resource_to_bus(socket->dev->bus, &region, mem->res);
452 
453 	map = mem->map;
454 	start = region.start;
455 	stop = region.end;
456 	card_start = mem->card_start;
457 
458 	if (map > 4 || start > stop || ((start ^ stop) >> 24) ||
459 	    (card_start >> 26) || mem->speed > 1000)
460 		return -EINVAL;
461 
462 	enable = I365_ENA_MEM(map);
463 	addr = exca_readb(socket, I365_ADDRWIN);
464 	if (addr & enable) {
465 		addr &= ~enable;
466 		exca_writeb(socket, I365_ADDRWIN, addr);
467 	}
468 
469 	exca_writeb(socket, CB_MEM_PAGE(map), start >> 24);
470 
471 	word = (start >> 12) & 0x0fff;
472 	if (mem->flags & MAP_16BIT)
473 		word |= I365_MEM_16BIT;
474 	if (mem->flags & MAP_0WS)
475 		word |= I365_MEM_0WS;
476 	exca_writew(socket, I365_MEM(map) + I365_W_START, word);
477 
478 	word = (stop >> 12) & 0x0fff;
479 	switch (to_cycles(mem->speed)) {
480 	case 0:
481 		break;
482 	case 1:
483 		word |= I365_MEM_WS0;
484 		break;
485 	case 2:
486 		word |= I365_MEM_WS1;
487 		break;
488 	default:
489 		word |= I365_MEM_WS1 | I365_MEM_WS0;
490 		break;
491 	}
492 	exca_writew(socket, I365_MEM(map) + I365_W_STOP, word);
493 
494 	word = ((card_start - start) >> 12) & 0x3fff;
495 	if (mem->flags & MAP_WRPROT)
496 		word |= I365_MEM_WRPROT;
497 	if (mem->flags & MAP_ATTRIB)
498 		word |= I365_MEM_REG;
499 	exca_writew(socket, I365_MEM(map) + I365_W_OFF, word);
500 
501 	if (mem->flags & MAP_ACTIVE)
502 		exca_writeb(socket, I365_ADDRWIN, addr | enable);
503 	return 0;
504 }
505 
506 
507 
508 static irqreturn_t yenta_interrupt(int irq, void *dev_id)
509 {
510 	unsigned int events;
511 	struct yenta_socket *socket = (struct yenta_socket *) dev_id;
512 	u8 csc;
513 	u32 cb_event;
514 
515 	/* Clear interrupt status for the event */
516 	cb_event = cb_readl(socket, CB_SOCKET_EVENT);
517 	cb_writel(socket, CB_SOCKET_EVENT, cb_event);
518 
519 	csc = exca_readb(socket, I365_CSC);
520 
521 	if (!(cb_event || csc))
522 		return IRQ_NONE;
523 
524 	events = (cb_event & (CB_CD1EVENT | CB_CD2EVENT)) ? SS_DETECT : 0 ;
525 	events |= (csc & I365_CSC_DETECT) ? SS_DETECT : 0;
526 	if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) {
527 		events |= (csc & I365_CSC_STSCHG) ? SS_STSCHG : 0;
528 	} else {
529 		events |= (csc & I365_CSC_BVD1) ? SS_BATDEAD : 0;
530 		events |= (csc & I365_CSC_BVD2) ? SS_BATWARN : 0;
531 		events |= (csc & I365_CSC_READY) ? SS_READY : 0;
532 	}
533 
534 	if (events)
535 		pcmcia_parse_events(&socket->socket, events);
536 
537 	return IRQ_HANDLED;
538 }
539 
540 static void yenta_interrupt_wrapper(struct timer_list *t)
541 {
542 	struct yenta_socket *socket = from_timer(socket, t, poll_timer);
543 
544 	yenta_interrupt(0, (void *)socket);
545 	socket->poll_timer.expires = jiffies + HZ;
546 	add_timer(&socket->poll_timer);
547 }
548 
549 static void yenta_clear_maps(struct yenta_socket *socket)
550 {
551 	int i;
552 	struct resource res = { .start = 0, .end = 0x0fff };
553 	pccard_io_map io = { 0, 0, 0, 0, 1 };
554 	pccard_mem_map mem = { .res = &res, };
555 
556 	yenta_set_socket(&socket->socket, &dead_socket);
557 	for (i = 0; i < 2; i++) {
558 		io.map = i;
559 		yenta_set_io_map(&socket->socket, &io);
560 	}
561 	for (i = 0; i < 5; i++) {
562 		mem.map = i;
563 		yenta_set_mem_map(&socket->socket, &mem);
564 	}
565 }
566 
567 /* redoes voltage interrogation if required */
568 static void yenta_interrogate(struct yenta_socket *socket)
569 {
570 	u32 state;
571 
572 	state = cb_readl(socket, CB_SOCKET_STATE);
573 	if (!(state & (CB_5VCARD | CB_3VCARD | CB_XVCARD | CB_YVCARD)) ||
574 	    (state & (CB_CDETECT1 | CB_CDETECT2 | CB_NOTACARD | CB_BADVCCREQ)) ||
575 	    ((state & (CB_16BITCARD | CB_CBCARD)) == (CB_16BITCARD | CB_CBCARD)))
576 		cb_writel(socket, CB_SOCKET_FORCE, CB_CVSTEST);
577 }
578 
579 /* Called at resume and initialization events */
580 static int yenta_sock_init(struct pcmcia_socket *sock)
581 {
582 	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
583 
584 	exca_writeb(socket, I365_GBLCTL, 0x00);
585 	exca_writeb(socket, I365_GENCTL, 0x00);
586 
587 	/* Redo card voltage interrogation */
588 	yenta_interrogate(socket);
589 
590 	yenta_clear_maps(socket);
591 
592 	if (socket->type && socket->type->sock_init)
593 		socket->type->sock_init(socket);
594 
595 	/* Re-enable CSC interrupts */
596 	cb_writel(socket, CB_SOCKET_MASK, CB_CDMASK);
597 
598 	return 0;
599 }
600 
601 static int yenta_sock_suspend(struct pcmcia_socket *sock)
602 {
603 	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
604 
605 	/* Disable CSC interrupts */
606 	cb_writel(socket, CB_SOCKET_MASK, 0x0);
607 
608 	return 0;
609 }
610 
611 /*
612  * Use an adaptive allocation for the memory resource,
613  * sometimes the memory behind pci bridges is limited:
614  * 1/8 of the size of the io window of the parent.
615  * max 4 MB, min 16 kB. We try very hard to not get below
616  * the "ACC" values, though.
617  */
618 #define BRIDGE_MEM_MAX (4*1024*1024)
619 #define BRIDGE_MEM_ACC (128*1024)
620 #define BRIDGE_MEM_MIN (16*1024)
621 
622 #define BRIDGE_IO_MAX 512
623 #define BRIDGE_IO_ACC 256
624 #define BRIDGE_IO_MIN 32
625 
626 #ifndef PCIBIOS_MIN_CARDBUS_IO
627 #define PCIBIOS_MIN_CARDBUS_IO PCIBIOS_MIN_IO
628 #endif
629 
630 static int yenta_search_one_res(struct resource *root, struct resource *res,
631 				u32 min)
632 {
633 	u32 align, size, start, end;
634 
635 	if (res->flags & IORESOURCE_IO) {
636 		align = 1024;
637 		size = BRIDGE_IO_MAX;
638 		start = PCIBIOS_MIN_CARDBUS_IO;
639 		end = ~0U;
640 	} else {
641 		unsigned long avail = resource_size(root);
642 		int i;
643 		size = BRIDGE_MEM_MAX;
644 		if (size > (avail - 1) / 8) {
645 			size = avail / 8;
646 			/* round size down to next power of 2 */
647 			i = 0;
648 			while ((size /= 2) != 0)
649 				i++;
650 			size = 1 << i;
651 		}
652 		if (size < min)
653 			size = min;
654 		align = size;
655 		start = PCIBIOS_MIN_MEM;
656 		end = ~0U;
657 	}
658 
659 	do {
660 		if (allocate_resource(root, res, size, start, end, align,
661 				      NULL, NULL) == 0) {
662 			return 1;
663 		}
664 		size = size/2;
665 		align = size;
666 	} while (size >= min);
667 
668 	return 0;
669 }
670 
671 
672 static int yenta_search_res(struct yenta_socket *socket, struct resource *res,
673 			    u32 min)
674 {
675 	struct resource *root;
676 	int i;
677 
678 	pci_bus_for_each_resource(socket->dev->bus, root, i) {
679 		if (!root)
680 			continue;
681 
682 		if ((res->flags ^ root->flags) &
683 		    (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH))
684 			continue; /* Wrong type */
685 
686 		if (yenta_search_one_res(root, res, min))
687 			return 1;
688 	}
689 	return 0;
690 }
691 
692 static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type, int addr_start, int addr_end)
693 {
694 	struct pci_dev *dev = socket->dev;
695 	struct resource *res;
696 	struct pci_bus_region region;
697 	unsigned mask;
698 
699 	res = &dev->resource[nr];
700 	/* Already allocated? */
701 	if (res->parent)
702 		return 0;
703 
704 	/* The granularity of the memory limit is 4kB, on IO it's 4 bytes */
705 	mask = ~0xfff;
706 	if (type & IORESOURCE_IO)
707 		mask = ~3;
708 
709 	res->name = dev->subordinate->name;
710 	res->flags = type;
711 
712 	region.start = config_readl(socket, addr_start) & mask;
713 	region.end = config_readl(socket, addr_end) | ~mask;
714 	if (region.start && region.end > region.start && !override_bios) {
715 		pcibios_bus_to_resource(dev->bus, res, &region);
716 		if (pci_claim_resource(dev, nr) == 0)
717 			return 0;
718 		dev_info(&dev->dev,
719 			 "Preassigned resource %d busy or not available, reconfiguring...\n",
720 			 nr);
721 	}
722 
723 	if (type & IORESOURCE_IO) {
724 		if ((yenta_search_res(socket, res, BRIDGE_IO_MAX)) ||
725 		    (yenta_search_res(socket, res, BRIDGE_IO_ACC)) ||
726 		    (yenta_search_res(socket, res, BRIDGE_IO_MIN)))
727 			return 1;
728 	} else {
729 		if (type & IORESOURCE_PREFETCH) {
730 			if ((yenta_search_res(socket, res, BRIDGE_MEM_MAX)) ||
731 			    (yenta_search_res(socket, res, BRIDGE_MEM_ACC)) ||
732 			    (yenta_search_res(socket, res, BRIDGE_MEM_MIN)))
733 				return 1;
734 			/* Approximating prefetchable by non-prefetchable */
735 			res->flags = IORESOURCE_MEM;
736 		}
737 		if ((yenta_search_res(socket, res, BRIDGE_MEM_MAX)) ||
738 		    (yenta_search_res(socket, res, BRIDGE_MEM_ACC)) ||
739 		    (yenta_search_res(socket, res, BRIDGE_MEM_MIN)))
740 			return 1;
741 	}
742 
743 	dev_info(&dev->dev,
744 		 "no resource of type %x available, trying to continue...\n",
745 		 type);
746 	res->start = res->end = res->flags = 0;
747 	return 0;
748 }
749 
750 static void yenta_free_res(struct yenta_socket *socket, int nr)
751 {
752 	struct pci_dev *dev = socket->dev;
753 	struct resource *res;
754 
755 	res = &dev->resource[nr];
756 	if (res->start != 0 && res->end != 0)
757 		release_resource(res);
758 
759 	res->start = res->end = res->flags = 0;
760 }
761 
762 /*
763  * Allocate the bridge mappings for the device..
764  */
765 static void yenta_allocate_resources(struct yenta_socket *socket)
766 {
767 	int program = 0;
768 	program += yenta_allocate_res(socket, PCI_CB_BRIDGE_IO_0_WINDOW,
769 			   IORESOURCE_IO,
770 			   PCI_CB_IO_BASE_0, PCI_CB_IO_LIMIT_0);
771 	program += yenta_allocate_res(socket, PCI_CB_BRIDGE_IO_1_WINDOW,
772 			   IORESOURCE_IO,
773 			   PCI_CB_IO_BASE_1, PCI_CB_IO_LIMIT_1);
774 	program += yenta_allocate_res(socket, PCI_CB_BRIDGE_MEM_0_WINDOW,
775 			   IORESOURCE_MEM | IORESOURCE_PREFETCH,
776 			   PCI_CB_MEMORY_BASE_0, PCI_CB_MEMORY_LIMIT_0);
777 	program += yenta_allocate_res(socket, PCI_CB_BRIDGE_MEM_1_WINDOW,
778 			   IORESOURCE_MEM,
779 			   PCI_CB_MEMORY_BASE_1, PCI_CB_MEMORY_LIMIT_1);
780 	if (program)
781 		pci_setup_cardbus(socket->dev->subordinate);
782 }
783 
784 
785 /*
786  * Free the bridge mappings for the device..
787  */
788 static void yenta_free_resources(struct yenta_socket *socket)
789 {
790 	yenta_free_res(socket, PCI_CB_BRIDGE_IO_0_WINDOW);
791 	yenta_free_res(socket, PCI_CB_BRIDGE_IO_1_WINDOW);
792 	yenta_free_res(socket, PCI_CB_BRIDGE_MEM_0_WINDOW);
793 	yenta_free_res(socket, PCI_CB_BRIDGE_MEM_1_WINDOW);
794 }
795 
796 
797 /*
798  * Close it down - release our resources and go home..
799  */
800 static void yenta_close(struct pci_dev *dev)
801 {
802 	struct yenta_socket *sock = pci_get_drvdata(dev);
803 
804 	/* Remove the register attributes */
805 	device_remove_file(&dev->dev, &dev_attr_yenta_registers);
806 
807 	/* we don't want a dying socket registered */
808 	pcmcia_unregister_socket(&sock->socket);
809 
810 	/* Disable all events so we don't die in an IRQ storm */
811 	cb_writel(sock, CB_SOCKET_MASK, 0x0);
812 	exca_writeb(sock, I365_CSCINT, 0);
813 
814 	if (sock->cb_irq)
815 		free_irq(sock->cb_irq, sock);
816 	else
817 		timer_shutdown_sync(&sock->poll_timer);
818 
819 	iounmap(sock->base);
820 	yenta_free_resources(sock);
821 
822 	pci_release_regions(dev);
823 	pci_disable_device(dev);
824 	pci_set_drvdata(dev, NULL);
825 	kfree(sock);
826 }
827 
828 
829 static struct pccard_operations yenta_socket_operations = {
830 	.init			= yenta_sock_init,
831 	.suspend		= yenta_sock_suspend,
832 	.get_status		= yenta_get_status,
833 	.set_socket		= yenta_set_socket,
834 	.set_io_map		= yenta_set_io_map,
835 	.set_mem_map		= yenta_set_mem_map,
836 };
837 
838 
839 #ifdef CONFIG_YENTA_TI
840 #include "ti113x.h"
841 #endif
842 #ifdef CONFIG_YENTA_RICOH
843 #include "ricoh.h"
844 #endif
845 #ifdef CONFIG_YENTA_TOSHIBA
846 #include "topic.h"
847 #endif
848 #ifdef CONFIG_YENTA_O2
849 #include "o2micro.h"
850 #endif
851 
852 enum {
853 	CARDBUS_TYPE_DEFAULT = -1,
854 	CARDBUS_TYPE_TI,
855 	CARDBUS_TYPE_TI113X,
856 	CARDBUS_TYPE_TI12XX,
857 	CARDBUS_TYPE_TI1250,
858 	CARDBUS_TYPE_RICOH,
859 	CARDBUS_TYPE_TOPIC95,
860 	CARDBUS_TYPE_TOPIC97,
861 	CARDBUS_TYPE_O2MICRO,
862 	CARDBUS_TYPE_ENE,
863 };
864 
865 /*
866  * Different cardbus controllers have slightly different
867  * initialization sequences etc details. List them here..
868  */
869 static struct cardbus_type cardbus_type[] = {
870 #ifdef CONFIG_YENTA_TI
871 	[CARDBUS_TYPE_TI]	= {
872 		.override	= ti_override,
873 		.save_state	= ti_save_state,
874 		.restore_state	= ti_restore_state,
875 		.sock_init	= ti_init,
876 	},
877 	[CARDBUS_TYPE_TI113X]	= {
878 		.override	= ti113x_override,
879 		.save_state	= ti_save_state,
880 		.restore_state	= ti_restore_state,
881 		.sock_init	= ti_init,
882 	},
883 	[CARDBUS_TYPE_TI12XX]	= {
884 		.override	= ti12xx_override,
885 		.save_state	= ti_save_state,
886 		.restore_state	= ti_restore_state,
887 		.sock_init	= ti_init,
888 	},
889 	[CARDBUS_TYPE_TI1250]	= {
890 		.override	= ti1250_override,
891 		.save_state	= ti_save_state,
892 		.restore_state	= ti_restore_state,
893 		.sock_init	= ti_init,
894 	},
895 	[CARDBUS_TYPE_ENE]	= {
896 		.override	= ene_override,
897 		.save_state	= ti_save_state,
898 		.restore_state	= ti_restore_state,
899 		.sock_init	= ti_init,
900 	},
901 #endif
902 #ifdef CONFIG_YENTA_RICOH
903 	[CARDBUS_TYPE_RICOH]	= {
904 		.override	= ricoh_override,
905 		.save_state	= ricoh_save_state,
906 		.restore_state	= ricoh_restore_state,
907 	},
908 #endif
909 #ifdef CONFIG_YENTA_TOSHIBA
910 	[CARDBUS_TYPE_TOPIC95]	= {
911 		.override	= topic95_override,
912 	},
913 	[CARDBUS_TYPE_TOPIC97]	= {
914 		.override	= topic97_override,
915 	},
916 #endif
917 #ifdef CONFIG_YENTA_O2
918 	[CARDBUS_TYPE_O2MICRO]	= {
919 		.override	= o2micro_override,
920 		.restore_state	= o2micro_restore_state,
921 	},
922 #endif
923 };
924 
925 
926 static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mask)
927 {
928 	int i;
929 	unsigned long val;
930 	u32 mask;
931 	u8 reg;
932 
933 	/*
934 	 * Probe for usable interrupts using the force
935 	 * register to generate bogus card status events.
936 	 */
937 	cb_writel(socket, CB_SOCKET_EVENT, -1);
938 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
939 	reg = exca_readb(socket, I365_CSCINT);
940 	exca_writeb(socket, I365_CSCINT, 0);
941 	val = probe_irq_on() & isa_irq_mask;
942 	for (i = 1; i < 16; i++) {
943 		if (!((val >> i) & 1))
944 			continue;
945 		exca_writeb(socket, I365_CSCINT, I365_CSC_STSCHG | (i << 4));
946 		cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS);
947 		udelay(100);
948 		cb_writel(socket, CB_SOCKET_EVENT, -1);
949 	}
950 	cb_writel(socket, CB_SOCKET_MASK, 0);
951 	exca_writeb(socket, I365_CSCINT, reg);
952 
953 	mask = probe_irq_mask(val) & 0xffff;
954 
955 	return mask;
956 }
957 
958 
959 /*
960  * yenta PCI irq probing.
961  * currently only used in the TI/EnE initialization code
962  */
963 #ifdef CONFIG_YENTA_TI
964 
965 /* interrupt handler, only used during probing */
966 static irqreturn_t yenta_probe_handler(int irq, void *dev_id)
967 {
968 	struct yenta_socket *socket = (struct yenta_socket *) dev_id;
969 	u8 csc;
970 	u32 cb_event;
971 
972 	/* Clear interrupt status for the event */
973 	cb_event = cb_readl(socket, CB_SOCKET_EVENT);
974 	cb_writel(socket, CB_SOCKET_EVENT, -1);
975 	csc = exca_readb(socket, I365_CSC);
976 
977 	if (cb_event || csc) {
978 		socket->probe_status = 1;
979 		return IRQ_HANDLED;
980 	}
981 
982 	return IRQ_NONE;
983 }
984 
985 /* probes the PCI interrupt, use only on override functions */
986 static int yenta_probe_cb_irq(struct yenta_socket *socket)
987 {
988 	u8 reg = 0;
989 
990 	if (!socket->cb_irq)
991 		return -1;
992 
993 	socket->probe_status = 0;
994 
995 	if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
996 		dev_warn(&socket->dev->dev,
997 			 "request_irq() in yenta_probe_cb_irq() failed!\n");
998 		return -1;
999 	}
1000 
1001 	/* generate interrupt, wait */
1002 	if (!socket->dev->irq)
1003 		reg = exca_readb(socket, I365_CSCINT);
1004 	exca_writeb(socket, I365_CSCINT, reg | I365_CSC_STSCHG);
1005 	cb_writel(socket, CB_SOCKET_EVENT, -1);
1006 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
1007 	cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS);
1008 
1009 	msleep(100);
1010 
1011 	/* disable interrupts */
1012 	cb_writel(socket, CB_SOCKET_MASK, 0);
1013 	exca_writeb(socket, I365_CSCINT, reg);
1014 	cb_writel(socket, CB_SOCKET_EVENT, -1);
1015 	exca_readb(socket, I365_CSC);
1016 
1017 	free_irq(socket->cb_irq, socket);
1018 
1019 	return (int) socket->probe_status;
1020 }
1021 
1022 #endif /* CONFIG_YENTA_TI */
1023 
1024 
1025 /*
1026  * Set static data that doesn't need re-initializing..
1027  */
1028 static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_irq_mask)
1029 {
1030 	socket->socket.pci_irq = socket->cb_irq;
1031 	if (isa_probe)
1032 		socket->socket.irq_mask = yenta_probe_irq(socket, isa_irq_mask);
1033 	else
1034 		socket->socket.irq_mask = 0;
1035 
1036 	dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
1037 		 socket->socket.irq_mask, socket->cb_irq);
1038 }
1039 
1040 /*
1041  * Initialize the standard cardbus registers
1042  */
1043 static void yenta_config_init(struct yenta_socket *socket)
1044 {
1045 	u16 bridge;
1046 	struct pci_dev *dev = socket->dev;
1047 	struct pci_bus_region region;
1048 
1049 	pcibios_resource_to_bus(socket->dev->bus, &region, &dev->resource[0]);
1050 
1051 	config_writel(socket, CB_LEGACY_MODE_BASE, 0);
1052 	config_writel(socket, PCI_BASE_ADDRESS_0, region.start);
1053 	config_writew(socket, PCI_COMMAND,
1054 			PCI_COMMAND_IO |
1055 			PCI_COMMAND_MEMORY |
1056 			PCI_COMMAND_MASTER |
1057 			PCI_COMMAND_WAIT);
1058 
1059 	/* MAGIC NUMBERS! Fixme */
1060 	config_writeb(socket, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES / 4);
1061 	config_writeb(socket, PCI_LATENCY_TIMER, 168);
1062 	config_writel(socket, PCI_PRIMARY_BUS,
1063 		(176 << 24) |			   /* sec. latency timer */
1064 		((unsigned int)dev->subordinate->busn_res.end << 16) | /* subordinate bus */
1065 		((unsigned int)dev->subordinate->busn_res.start << 8) |  /* secondary bus */
1066 		dev->subordinate->primary);		   /* primary bus */
1067 
1068 	/*
1069 	 * Set up the bridging state:
1070 	 *  - enable write posting.
1071 	 *  - memory window 0 prefetchable, window 1 non-prefetchable
1072 	 *  - PCI interrupts enabled if a PCI interrupt exists..
1073 	 */
1074 	bridge = config_readw(socket, CB_BRIDGE_CONTROL);
1075 	bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
1076 	bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN;
1077 	config_writew(socket, CB_BRIDGE_CONTROL, bridge);
1078 }
1079 
1080 /**
1081  * yenta_fixup_parent_bridge - Fix subordinate bus# of the parent bridge
1082  * @cardbus_bridge: The PCI bus which the CardBus bridge bridges to
1083  *
1084  * Checks if devices on the bus which the CardBus bridge bridges to would be
1085  * invisible during PCI scans because of a misconfigured subordinate number
1086  * of the parent brige - some BIOSes seem to be too lazy to set it right.
1087  * Does the fixup carefully by checking how far it can go without conflicts.
1088  * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
1089  */
1090 static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
1091 {
1092 	struct pci_bus *sibling;
1093 	unsigned char upper_limit;
1094 	/*
1095 	 * We only check and fix the parent bridge: All systems which need
1096 	 * this fixup that have been reviewed are laptops and the only bridge
1097 	 * which needed fixing was the parent bridge of the CardBus bridge:
1098 	 */
1099 	struct pci_bus *bridge_to_fix = cardbus_bridge->parent;
1100 
1101 	/* Check bus numbers are already set up correctly: */
1102 	if (bridge_to_fix->busn_res.end >= cardbus_bridge->busn_res.end)
1103 		return; /* The subordinate number is ok, nothing to do */
1104 
1105 	if (!bridge_to_fix->parent)
1106 		return; /* Root bridges are ok */
1107 
1108 	/* stay within the limits of the bus range of the parent: */
1109 	upper_limit = bridge_to_fix->parent->busn_res.end;
1110 
1111 	/* check the bus ranges of all sibling bridges to prevent overlap */
1112 	list_for_each_entry(sibling, &bridge_to_fix->parent->children,
1113 			node) {
1114 		/*
1115 		 * If the sibling has a higher secondary bus number
1116 		 * and it's secondary is equal or smaller than our
1117 		 * current upper limit, set the new upper limit to
1118 		 * the bus number below the sibling's range:
1119 		 */
1120 		if (sibling->busn_res.start > bridge_to_fix->busn_res.end
1121 		    && sibling->busn_res.start <= upper_limit)
1122 			upper_limit = sibling->busn_res.start - 1;
1123 	}
1124 
1125 	/* Show that the wanted subordinate number is not possible: */
1126 	if (cardbus_bridge->busn_res.end > upper_limit)
1127 		dev_warn(&cardbus_bridge->dev,
1128 			 "Upper limit for fixing this bridge's parent bridge: #%02x\n",
1129 			 upper_limit);
1130 
1131 	/* If we have room to increase the bridge's subordinate number, */
1132 	if (bridge_to_fix->busn_res.end < upper_limit) {
1133 
1134 		/* use the highest number of the hidden bus, within limits */
1135 		unsigned char subordinate_to_assign =
1136 			min_t(int, cardbus_bridge->busn_res.end, upper_limit);
1137 
1138 		dev_info(&bridge_to_fix->dev,
1139 			 "Raising subordinate bus# of parent bus (#%02x) from #%02x to #%02x\n",
1140 			 bridge_to_fix->number,
1141 			 (int)bridge_to_fix->busn_res.end,
1142 			 subordinate_to_assign);
1143 
1144 		/* Save the new subordinate in the bus struct of the bridge */
1145 		bridge_to_fix->busn_res.end = subordinate_to_assign;
1146 
1147 		/* and update the PCI config space with the new subordinate */
1148 		pci_write_config_byte(bridge_to_fix->self,
1149 			PCI_SUBORDINATE_BUS, bridge_to_fix->busn_res.end);
1150 	}
1151 }
1152 
1153 /*
1154  * Initialize a cardbus controller. Make sure we have a usable
1155  * interrupt, and that we can map the cardbus area. Fill in the
1156  * socket information structure..
1157  */
1158 static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
1159 {
1160 	struct yenta_socket *socket;
1161 	int ret;
1162 
1163 	/*
1164 	 * If we failed to assign proper bus numbers for this cardbus
1165 	 * controller during PCI probe, its subordinate pci_bus is NULL.
1166 	 * Bail out if so.
1167 	 */
1168 	if (!dev->subordinate) {
1169 		dev_err(&dev->dev, "no bus associated! (try 'pci=assign-busses')\n");
1170 		return -ENODEV;
1171 	}
1172 
1173 	socket = kzalloc(sizeof(struct yenta_socket), GFP_KERNEL);
1174 	if (!socket)
1175 		return -ENOMEM;
1176 
1177 	/* prepare pcmcia_socket */
1178 	socket->socket.ops = &yenta_socket_operations;
1179 	socket->socket.resource_ops = &pccard_nonstatic_ops;
1180 	socket->socket.dev.parent = &dev->dev;
1181 	socket->socket.driver_data = socket;
1182 	socket->socket.owner = THIS_MODULE;
1183 	socket->socket.features = SS_CAP_PAGE_REGS | SS_CAP_PCCARD;
1184 	socket->socket.map_size = 0x1000;
1185 	socket->socket.cb_dev = dev;
1186 
1187 	/* prepare struct yenta_socket */
1188 	socket->dev = dev;
1189 	pci_set_drvdata(dev, socket);
1190 
1191 	/*
1192 	 * Do some basic sanity checking..
1193 	 */
1194 	if (pci_enable_device(dev)) {
1195 		ret = -EBUSY;
1196 		goto free;
1197 	}
1198 
1199 	ret = pci_request_regions(dev, "yenta_socket");
1200 	if (ret)
1201 		goto disable;
1202 
1203 	if (!pci_resource_start(dev, 0)) {
1204 		dev_err(&dev->dev, "No cardbus resource!\n");
1205 		ret = -ENODEV;
1206 		goto release;
1207 	}
1208 
1209 	/*
1210 	 * Ok, start setup.. Map the cardbus registers,
1211 	 * and request the IRQ.
1212 	 */
1213 	socket->base = ioremap(pci_resource_start(dev, 0), 0x1000);
1214 	if (!socket->base) {
1215 		ret = -ENOMEM;
1216 		goto release;
1217 	}
1218 
1219 	/*
1220 	 * report the subsystem vendor and device for help debugging
1221 	 * the irq stuff...
1222 	 */
1223 	dev_info(&dev->dev, "CardBus bridge found [%04x:%04x]\n",
1224 		 dev->subsystem_vendor, dev->subsystem_device);
1225 
1226 	yenta_config_init(socket);
1227 
1228 	/* Disable all events */
1229 	cb_writel(socket, CB_SOCKET_MASK, 0x0);
1230 
1231 	/* Set up the bridge regions.. */
1232 	yenta_allocate_resources(socket);
1233 
1234 	socket->cb_irq = dev->irq;
1235 
1236 	/* Do we have special options for the device? */
1237 	if (id->driver_data != CARDBUS_TYPE_DEFAULT &&
1238 	    id->driver_data < ARRAY_SIZE(cardbus_type)) {
1239 		socket->type = &cardbus_type[id->driver_data];
1240 
1241 		ret = socket->type->override(socket);
1242 		if (ret < 0)
1243 			goto unmap;
1244 	}
1245 
1246 	/* We must finish initialization here */
1247 
1248 	if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
1249 		/* No IRQ or request_irq failed. Poll */
1250 		socket->cb_irq = 0; /* But zero is a valid IRQ number. */
1251 		timer_setup(&socket->poll_timer, yenta_interrupt_wrapper, 0);
1252 		mod_timer(&socket->poll_timer, jiffies + HZ);
1253 		dev_info(&dev->dev,
1254 			 "no PCI IRQ, CardBus support disabled for this socket.\n");
1255 		dev_info(&dev->dev,
1256 			 "check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
1257 	} else {
1258 		socket->socket.features |= SS_CAP_CARDBUS;
1259 	}
1260 
1261 	/* Figure out what the dang thing can do for the PCMCIA layer... */
1262 	yenta_interrogate(socket);
1263 	yenta_get_socket_capabilities(socket, isa_interrupts);
1264 	dev_info(&dev->dev, "Socket status: %08x\n",
1265 		 cb_readl(socket, CB_SOCKET_STATE));
1266 
1267 	yenta_fixup_parent_bridge(dev->subordinate);
1268 
1269 	/* Register it with the pcmcia layer.. */
1270 	ret = pcmcia_register_socket(&socket->socket);
1271 	if (ret)
1272 		goto free_irq;
1273 
1274 	/* Add the yenta register attributes */
1275 	ret = device_create_file(&dev->dev, &dev_attr_yenta_registers);
1276 	if (ret)
1277 		goto unregister_socket;
1278 
1279 	return ret;
1280 
1281 	/* error path... */
1282  unregister_socket:
1283 	pcmcia_unregister_socket(&socket->socket);
1284  free_irq:
1285 	if (socket->cb_irq)
1286 		free_irq(socket->cb_irq, socket);
1287 	else
1288 		timer_shutdown_sync(&socket->poll_timer);
1289  unmap:
1290 	iounmap(socket->base);
1291 	yenta_free_resources(socket);
1292  release:
1293 	pci_release_regions(dev);
1294  disable:
1295 	pci_disable_device(dev);
1296  free:
1297 	pci_set_drvdata(dev, NULL);
1298 	kfree(socket);
1299 	return ret;
1300 }
1301 
1302 #ifdef CONFIG_PM_SLEEP
1303 static int yenta_dev_suspend_noirq(struct device *dev)
1304 {
1305 	struct pci_dev *pdev = to_pci_dev(dev);
1306 	struct yenta_socket *socket = pci_get_drvdata(pdev);
1307 
1308 	if (!socket)
1309 		return 0;
1310 
1311 	if (socket->type && socket->type->save_state)
1312 		socket->type->save_state(socket);
1313 
1314 	pci_save_state(pdev);
1315 	pci_read_config_dword(pdev, 16*4, &socket->saved_state[0]);
1316 	pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]);
1317 	pci_disable_device(pdev);
1318 
1319 	return 0;
1320 }
1321 
1322 static int yenta_dev_resume_noirq(struct device *dev)
1323 {
1324 	struct pci_dev *pdev = to_pci_dev(dev);
1325 	struct yenta_socket *socket = pci_get_drvdata(pdev);
1326 	int ret;
1327 
1328 	if (!socket)
1329 		return 0;
1330 
1331 	pci_write_config_dword(pdev, 16*4, socket->saved_state[0]);
1332 	pci_write_config_dword(pdev, 17*4, socket->saved_state[1]);
1333 
1334 	ret = pci_enable_device(pdev);
1335 	if (ret)
1336 		return ret;
1337 
1338 	pci_set_master(pdev);
1339 
1340 	if (socket->type && socket->type->restore_state)
1341 		socket->type->restore_state(socket);
1342 
1343 	return 0;
1344 }
1345 
1346 static const struct dev_pm_ops yenta_pm_ops = {
1347 	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(yenta_dev_suspend_noirq, yenta_dev_resume_noirq)
1348 };
1349 
1350 #define YENTA_PM_OPS	(&yenta_pm_ops)
1351 #else
1352 #define YENTA_PM_OPS	NULL
1353 #endif
1354 
1355 #define CB_ID(vend, dev, type)				\
1356 	{						\
1357 		.vendor		= vend,			\
1358 		.device		= dev,			\
1359 		.subvendor	= PCI_ANY_ID,		\
1360 		.subdevice	= PCI_ANY_ID,		\
1361 		.class		= PCI_CLASS_BRIDGE_CARDBUS << 8, \
1362 		.class_mask	= ~0,			\
1363 		.driver_data	= CARDBUS_TYPE_##type,	\
1364 	}
1365 
1366 static const struct pci_device_id yenta_table[] = {
1367 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1031, TI),
1368 
1369 	/*
1370 	 * TBD: Check if these TI variants can use more
1371 	 * advanced overrides instead.  (I can't get the
1372 	 * data sheets for these devices. --rmk)
1373 	 */
1374 #ifdef CONFIG_YENTA_TI
1375 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1210, TI),
1376 
1377 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1130, TI113X),
1378 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1131, TI113X),
1379 
1380 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1211, TI12XX),
1381 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1220, TI12XX),
1382 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1221, TI12XX),
1383 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1225, TI12XX),
1384 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1251A, TI12XX),
1385 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1251B, TI12XX),
1386 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, TI12XX),
1387 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1450, TI12XX),
1388 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1451A, TI12XX),
1389 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1510, TI12XX),
1390 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520, TI12XX),
1391 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1620, TI12XX),
1392 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4410, TI12XX),
1393 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4450, TI12XX),
1394 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4451, TI12XX),
1395 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4510, TI12XX),
1396 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4520, TI12XX),
1397 
1398 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250),
1399 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250),
1400 
1401 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX21_XX11, TI12XX),
1402 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X515, TI12XX),
1403 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX12, TI12XX),
1404 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X420, TI12XX),
1405 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X620, TI12XX),
1406 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7410, TI12XX),
1407 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7510, TI12XX),
1408 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7610, TI12XX),
1409 
1410 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_710, ENE),
1411 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_712, ENE),
1412 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_720, ENE),
1413 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_722, ENE),
1414 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE),
1415 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE),
1416 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE),
1417 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE),
1418 #endif /* CONFIG_YENTA_TI */
1419 
1420 #ifdef CONFIG_YENTA_RICOH
1421 	CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH),
1422 	CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH),
1423 	CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C475, RICOH),
1424 	CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, RICOH),
1425 	CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C478, RICOH),
1426 #endif
1427 
1428 #ifdef CONFIG_YENTA_TOSHIBA
1429 	CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC95, TOPIC95),
1430 	CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC97, TOPIC97),
1431 	CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC100, TOPIC97),
1432 #endif
1433 
1434 #ifdef CONFIG_YENTA_O2
1435 	CB_ID(PCI_VENDOR_ID_O2, PCI_ANY_ID, O2MICRO),
1436 #endif
1437 
1438 	/* match any cardbus bridge */
1439 	CB_ID(PCI_ANY_ID, PCI_ANY_ID, DEFAULT),
1440 	{ /* all zeroes */ }
1441 };
1442 MODULE_DEVICE_TABLE(pci, yenta_table);
1443 
1444 
1445 static struct pci_driver yenta_cardbus_driver = {
1446 	.name		= "yenta_cardbus",
1447 	.id_table	= yenta_table,
1448 	.probe		= yenta_probe,
1449 	.remove		= yenta_close,
1450 	.driver.pm	= YENTA_PM_OPS,
1451 };
1452 
1453 module_pci_driver(yenta_cardbus_driver);
1454 
1455 MODULE_LICENSE("GPL");
1456