1 /* 2 * Regular cardbus driver ("yenta_socket") 3 * 4 * (C) Copyright 1999, 2000 Linus Torvalds 5 * 6 * Changelog: 7 * Aug 2002: Manfred Spraul <manfred@colorfullife.com> 8 * Dynamically adjust the size of the bridge resource 9 * 10 * May 2003: Dominik Brodowski <linux@brodo.de> 11 * Merge pci_socket.c and yenta.c into one file 12 */ 13 #include <linux/init.h> 14 #include <linux/pci.h> 15 #include <linux/workqueue.h> 16 #include <linux/interrupt.h> 17 #include <linux/delay.h> 18 #include <linux/module.h> 19 #include <linux/io.h> 20 #include <linux/slab.h> 21 22 #include <pcmcia/ss.h> 23 24 #include "yenta_socket.h" 25 #include "i82365.h" 26 27 static bool disable_clkrun; 28 module_param(disable_clkrun, bool, 0444); 29 MODULE_PARM_DESC(disable_clkrun, 30 "If PC card doesn't function properly, please try this option (TI and Ricoh bridges only)"); 31 32 static bool isa_probe = 1; 33 module_param(isa_probe, bool, 0444); 34 MODULE_PARM_DESC(isa_probe, "If set ISA interrupts are probed (default). Set to N to disable probing"); 35 36 static bool pwr_irqs_off; 37 module_param(pwr_irqs_off, bool, 0644); 38 MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!"); 39 40 static char o2_speedup[] = "default"; 41 module_param_string(o2_speedup, o2_speedup, sizeof(o2_speedup), 0444); 42 MODULE_PARM_DESC(o2_speedup, "Use prefetch/burst for O2-bridges: 'on', 'off' " 43 "or 'default' (uses recommended behaviour for the detected bridge)"); 44 45 /* 46 * Only probe "regular" interrupts, don't 47 * touch dangerous spots like the mouse irq, 48 * because there are mice that apparently 49 * get really confused if they get fondled 50 * too intimately. 51 * 52 * Default to 11, 10, 9, 7, 6, 5, 4, 3. 53 */ 54 static u32 isa_interrupts = 0x0ef8; 55 56 57 #define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args) 58 59 /* Don't ask.. */ 60 #define to_cycles(ns) ((ns)/120) 61 #define to_ns(cycles) ((cycles)*120) 62 63 /* 64 * yenta PCI irq probing. 65 * currently only used in the TI/EnE initialization code 66 */ 67 #ifdef CONFIG_YENTA_TI 68 static int yenta_probe_cb_irq(struct yenta_socket *socket); 69 static unsigned int yenta_probe_irq(struct yenta_socket *socket, 70 u32 isa_irq_mask); 71 #endif 72 73 74 static unsigned int override_bios; 75 module_param(override_bios, uint, 0000); 76 MODULE_PARM_DESC(override_bios, "yenta ignore bios resource allocation"); 77 78 /* 79 * Generate easy-to-use ways of reading a cardbus sockets 80 * regular memory space ("cb_xxx"), configuration space 81 * ("config_xxx") and compatibility space ("exca_xxxx") 82 */ 83 static inline u32 cb_readl(struct yenta_socket *socket, unsigned reg) 84 { 85 u32 val = readl(socket->base + reg); 86 debug("%04x %08x\n", socket, reg, val); 87 return val; 88 } 89 90 static inline void cb_writel(struct yenta_socket *socket, unsigned reg, u32 val) 91 { 92 debug("%04x %08x\n", socket, reg, val); 93 writel(val, socket->base + reg); 94 readl(socket->base + reg); /* avoid problems with PCI write posting */ 95 } 96 97 static inline u8 config_readb(struct yenta_socket *socket, unsigned offset) 98 { 99 u8 val; 100 pci_read_config_byte(socket->dev, offset, &val); 101 debug("%04x %02x\n", socket, offset, val); 102 return val; 103 } 104 105 static inline u16 config_readw(struct yenta_socket *socket, unsigned offset) 106 { 107 u16 val; 108 pci_read_config_word(socket->dev, offset, &val); 109 debug("%04x %04x\n", socket, offset, val); 110 return val; 111 } 112 113 static inline u32 config_readl(struct yenta_socket *socket, unsigned offset) 114 { 115 u32 val; 116 pci_read_config_dword(socket->dev, offset, &val); 117 debug("%04x %08x\n", socket, offset, val); 118 return val; 119 } 120 121 static inline void config_writeb(struct yenta_socket *socket, unsigned offset, u8 val) 122 { 123 debug("%04x %02x\n", socket, offset, val); 124 pci_write_config_byte(socket->dev, offset, val); 125 } 126 127 static inline void config_writew(struct yenta_socket *socket, unsigned offset, u16 val) 128 { 129 debug("%04x %04x\n", socket, offset, val); 130 pci_write_config_word(socket->dev, offset, val); 131 } 132 133 static inline void config_writel(struct yenta_socket *socket, unsigned offset, u32 val) 134 { 135 debug("%04x %08x\n", socket, offset, val); 136 pci_write_config_dword(socket->dev, offset, val); 137 } 138 139 static inline u8 exca_readb(struct yenta_socket *socket, unsigned reg) 140 { 141 u8 val = readb(socket->base + 0x800 + reg); 142 debug("%04x %02x\n", socket, reg, val); 143 return val; 144 } 145 146 static inline u8 exca_readw(struct yenta_socket *socket, unsigned reg) 147 { 148 u16 val; 149 val = readb(socket->base + 0x800 + reg); 150 val |= readb(socket->base + 0x800 + reg + 1) << 8; 151 debug("%04x %04x\n", socket, reg, val); 152 return val; 153 } 154 155 static inline void exca_writeb(struct yenta_socket *socket, unsigned reg, u8 val) 156 { 157 debug("%04x %02x\n", socket, reg, val); 158 writeb(val, socket->base + 0x800 + reg); 159 readb(socket->base + 0x800 + reg); /* PCI write posting... */ 160 } 161 162 static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val) 163 { 164 debug("%04x %04x\n", socket, reg, val); 165 writeb(val, socket->base + 0x800 + reg); 166 writeb(val >> 8, socket->base + 0x800 + reg + 1); 167 168 /* PCI write posting... */ 169 readb(socket->base + 0x800 + reg); 170 readb(socket->base + 0x800 + reg + 1); 171 } 172 173 static ssize_t show_yenta_registers(struct device *yentadev, struct device_attribute *attr, char *buf) 174 { 175 struct pci_dev *dev = to_pci_dev(yentadev); 176 struct yenta_socket *socket = pci_get_drvdata(dev); 177 int offset = 0, i; 178 179 offset = snprintf(buf, PAGE_SIZE, "CB registers:"); 180 for (i = 0; i < 0x24; i += 4) { 181 unsigned val; 182 if (!(i & 15)) 183 offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i); 184 val = cb_readl(socket, i); 185 offset += snprintf(buf + offset, PAGE_SIZE - offset, " %08x", val); 186 } 187 188 offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:"); 189 for (i = 0; i < 0x45; i++) { 190 unsigned char val; 191 if (!(i & 7)) { 192 if (i & 8) { 193 memcpy(buf + offset, " -", 2); 194 offset += 2; 195 } else 196 offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i); 197 } 198 val = exca_readb(socket, i); 199 offset += snprintf(buf + offset, PAGE_SIZE - offset, " %02x", val); 200 } 201 buf[offset++] = '\n'; 202 return offset; 203 } 204 205 static DEVICE_ATTR(yenta_registers, S_IRUSR, show_yenta_registers, NULL); 206 207 /* 208 * Ugh, mixed-mode cardbus and 16-bit pccard state: things depend 209 * on what kind of card is inserted.. 210 */ 211 static int yenta_get_status(struct pcmcia_socket *sock, unsigned int *value) 212 { 213 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 214 unsigned int val; 215 u32 state = cb_readl(socket, CB_SOCKET_STATE); 216 217 val = (state & CB_3VCARD) ? SS_3VCARD : 0; 218 val |= (state & CB_XVCARD) ? SS_XVCARD : 0; 219 val |= (state & (CB_5VCARD | CB_3VCARD | CB_XVCARD | CB_YVCARD)) ? 0 : SS_PENDING; 220 val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? SS_PENDING : 0; 221 222 223 if (state & CB_CBCARD) { 224 val |= SS_CARDBUS; 225 val |= (state & CB_CARDSTS) ? SS_STSCHG : 0; 226 val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT; 227 val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0; 228 } else if (state & CB_16BITCARD) { 229 u8 status = exca_readb(socket, I365_STATUS); 230 val |= ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0; 231 if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) { 232 val |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG; 233 } else { 234 val |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD; 235 val |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN; 236 } 237 val |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0; 238 val |= (status & I365_CS_READY) ? SS_READY : 0; 239 val |= (status & I365_CS_POWERON) ? SS_POWERON : 0; 240 } 241 242 *value = val; 243 return 0; 244 } 245 246 static void yenta_set_power(struct yenta_socket *socket, socket_state_t *state) 247 { 248 /* some birdges require to use the ExCA registers to power 16bit cards */ 249 if (!(cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) && 250 (socket->flags & YENTA_16BIT_POWER_EXCA)) { 251 u8 reg, old; 252 reg = old = exca_readb(socket, I365_POWER); 253 reg &= ~(I365_VCC_MASK | I365_VPP1_MASK | I365_VPP2_MASK); 254 255 /* i82365SL-DF style */ 256 if (socket->flags & YENTA_16BIT_POWER_DF) { 257 switch (state->Vcc) { 258 case 33: 259 reg |= I365_VCC_3V; 260 break; 261 case 50: 262 reg |= I365_VCC_5V; 263 break; 264 default: 265 reg = 0; 266 break; 267 } 268 switch (state->Vpp) { 269 case 33: 270 case 50: 271 reg |= I365_VPP1_5V; 272 break; 273 case 120: 274 reg |= I365_VPP1_12V; 275 break; 276 } 277 } else { 278 /* i82365SL-B style */ 279 switch (state->Vcc) { 280 case 50: 281 reg |= I365_VCC_5V; 282 break; 283 default: 284 reg = 0; 285 break; 286 } 287 switch (state->Vpp) { 288 case 50: 289 reg |= I365_VPP1_5V | I365_VPP2_5V; 290 break; 291 case 120: 292 reg |= I365_VPP1_12V | I365_VPP2_12V; 293 break; 294 } 295 } 296 297 if (reg != old) 298 exca_writeb(socket, I365_POWER, reg); 299 } else { 300 u32 reg = 0; /* CB_SC_STPCLK? */ 301 switch (state->Vcc) { 302 case 33: 303 reg = CB_SC_VCC_3V; 304 break; 305 case 50: 306 reg = CB_SC_VCC_5V; 307 break; 308 default: 309 reg = 0; 310 break; 311 } 312 switch (state->Vpp) { 313 case 33: 314 reg |= CB_SC_VPP_3V; 315 break; 316 case 50: 317 reg |= CB_SC_VPP_5V; 318 break; 319 case 120: 320 reg |= CB_SC_VPP_12V; 321 break; 322 } 323 if (reg != cb_readl(socket, CB_SOCKET_CONTROL)) 324 cb_writel(socket, CB_SOCKET_CONTROL, reg); 325 } 326 } 327 328 static int yenta_set_socket(struct pcmcia_socket *sock, socket_state_t *state) 329 { 330 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 331 u16 bridge; 332 333 /* if powering down: do it immediately */ 334 if (state->Vcc == 0) 335 yenta_set_power(socket, state); 336 337 socket->io_irq = state->io_irq; 338 bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~(CB_BRIDGE_CRST | CB_BRIDGE_INTR); 339 if (cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) { 340 u8 intr; 341 bridge |= (state->flags & SS_RESET) ? CB_BRIDGE_CRST : 0; 342 343 /* ISA interrupt control? */ 344 intr = exca_readb(socket, I365_INTCTL); 345 intr = (intr & ~0xf); 346 if (!socket->dev->irq) { 347 intr |= socket->cb_irq ? socket->cb_irq : state->io_irq; 348 bridge |= CB_BRIDGE_INTR; 349 } 350 exca_writeb(socket, I365_INTCTL, intr); 351 } else { 352 u8 reg; 353 354 reg = exca_readb(socket, I365_INTCTL) & (I365_RING_ENA | I365_INTR_ENA); 355 reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET; 356 reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0; 357 if (state->io_irq != socket->dev->irq) { 358 reg |= state->io_irq; 359 bridge |= CB_BRIDGE_INTR; 360 } 361 exca_writeb(socket, I365_INTCTL, reg); 362 363 reg = exca_readb(socket, I365_POWER) & (I365_VCC_MASK|I365_VPP1_MASK); 364 reg |= I365_PWR_NORESET; 365 if (state->flags & SS_PWR_AUTO) 366 reg |= I365_PWR_AUTO; 367 if (state->flags & SS_OUTPUT_ENA) 368 reg |= I365_PWR_OUT; 369 if (exca_readb(socket, I365_POWER) != reg) 370 exca_writeb(socket, I365_POWER, reg); 371 372 /* CSC interrupt: no ISA irq for CSC */ 373 reg = exca_readb(socket, I365_CSCINT); 374 reg &= I365_CSC_IRQ_MASK; 375 reg |= I365_CSC_DETECT; 376 if (state->flags & SS_IOCARD) { 377 if (state->csc_mask & SS_STSCHG) 378 reg |= I365_CSC_STSCHG; 379 } else { 380 if (state->csc_mask & SS_BATDEAD) 381 reg |= I365_CSC_BVD1; 382 if (state->csc_mask & SS_BATWARN) 383 reg |= I365_CSC_BVD2; 384 if (state->csc_mask & SS_READY) 385 reg |= I365_CSC_READY; 386 } 387 exca_writeb(socket, I365_CSCINT, reg); 388 exca_readb(socket, I365_CSC); 389 if (sock->zoom_video) 390 sock->zoom_video(sock, state->flags & SS_ZVCARD); 391 } 392 config_writew(socket, CB_BRIDGE_CONTROL, bridge); 393 /* Socket event mask: get card insert/remove events.. */ 394 cb_writel(socket, CB_SOCKET_EVENT, -1); 395 cb_writel(socket, CB_SOCKET_MASK, CB_CDMASK); 396 397 /* if powering up: do it as the last step when the socket is configured */ 398 if (state->Vcc != 0) 399 yenta_set_power(socket, state); 400 return 0; 401 } 402 403 static int yenta_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) 404 { 405 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 406 int map; 407 unsigned char ioctl, addr, enable; 408 409 map = io->map; 410 411 if (map > 1) 412 return -EINVAL; 413 414 enable = I365_ENA_IO(map); 415 addr = exca_readb(socket, I365_ADDRWIN); 416 417 /* Disable the window before changing it.. */ 418 if (addr & enable) { 419 addr &= ~enable; 420 exca_writeb(socket, I365_ADDRWIN, addr); 421 } 422 423 exca_writew(socket, I365_IO(map)+I365_W_START, io->start); 424 exca_writew(socket, I365_IO(map)+I365_W_STOP, io->stop); 425 426 ioctl = exca_readb(socket, I365_IOCTL) & ~I365_IOCTL_MASK(map); 427 if (io->flags & MAP_0WS) 428 ioctl |= I365_IOCTL_0WS(map); 429 if (io->flags & MAP_16BIT) 430 ioctl |= I365_IOCTL_16BIT(map); 431 if (io->flags & MAP_AUTOSZ) 432 ioctl |= I365_IOCTL_IOCS16(map); 433 exca_writeb(socket, I365_IOCTL, ioctl); 434 435 if (io->flags & MAP_ACTIVE) 436 exca_writeb(socket, I365_ADDRWIN, addr | enable); 437 return 0; 438 } 439 440 static int yenta_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *mem) 441 { 442 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 443 struct pci_bus_region region; 444 int map; 445 unsigned char addr, enable; 446 unsigned int start, stop, card_start; 447 unsigned short word; 448 449 pcibios_resource_to_bus(socket->dev->bus, ®ion, mem->res); 450 451 map = mem->map; 452 start = region.start; 453 stop = region.end; 454 card_start = mem->card_start; 455 456 if (map > 4 || start > stop || ((start ^ stop) >> 24) || 457 (card_start >> 26) || mem->speed > 1000) 458 return -EINVAL; 459 460 enable = I365_ENA_MEM(map); 461 addr = exca_readb(socket, I365_ADDRWIN); 462 if (addr & enable) { 463 addr &= ~enable; 464 exca_writeb(socket, I365_ADDRWIN, addr); 465 } 466 467 exca_writeb(socket, CB_MEM_PAGE(map), start >> 24); 468 469 word = (start >> 12) & 0x0fff; 470 if (mem->flags & MAP_16BIT) 471 word |= I365_MEM_16BIT; 472 if (mem->flags & MAP_0WS) 473 word |= I365_MEM_0WS; 474 exca_writew(socket, I365_MEM(map) + I365_W_START, word); 475 476 word = (stop >> 12) & 0x0fff; 477 switch (to_cycles(mem->speed)) { 478 case 0: 479 break; 480 case 1: 481 word |= I365_MEM_WS0; 482 break; 483 case 2: 484 word |= I365_MEM_WS1; 485 break; 486 default: 487 word |= I365_MEM_WS1 | I365_MEM_WS0; 488 break; 489 } 490 exca_writew(socket, I365_MEM(map) + I365_W_STOP, word); 491 492 word = ((card_start - start) >> 12) & 0x3fff; 493 if (mem->flags & MAP_WRPROT) 494 word |= I365_MEM_WRPROT; 495 if (mem->flags & MAP_ATTRIB) 496 word |= I365_MEM_REG; 497 exca_writew(socket, I365_MEM(map) + I365_W_OFF, word); 498 499 if (mem->flags & MAP_ACTIVE) 500 exca_writeb(socket, I365_ADDRWIN, addr | enable); 501 return 0; 502 } 503 504 505 506 static irqreturn_t yenta_interrupt(int irq, void *dev_id) 507 { 508 unsigned int events; 509 struct yenta_socket *socket = (struct yenta_socket *) dev_id; 510 u8 csc; 511 u32 cb_event; 512 513 /* Clear interrupt status for the event */ 514 cb_event = cb_readl(socket, CB_SOCKET_EVENT); 515 cb_writel(socket, CB_SOCKET_EVENT, cb_event); 516 517 csc = exca_readb(socket, I365_CSC); 518 519 if (!(cb_event || csc)) 520 return IRQ_NONE; 521 522 events = (cb_event & (CB_CD1EVENT | CB_CD2EVENT)) ? SS_DETECT : 0 ; 523 events |= (csc & I365_CSC_DETECT) ? SS_DETECT : 0; 524 if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) { 525 events |= (csc & I365_CSC_STSCHG) ? SS_STSCHG : 0; 526 } else { 527 events |= (csc & I365_CSC_BVD1) ? SS_BATDEAD : 0; 528 events |= (csc & I365_CSC_BVD2) ? SS_BATWARN : 0; 529 events |= (csc & I365_CSC_READY) ? SS_READY : 0; 530 } 531 532 if (events) 533 pcmcia_parse_events(&socket->socket, events); 534 535 return IRQ_HANDLED; 536 } 537 538 static void yenta_interrupt_wrapper(struct timer_list *t) 539 { 540 struct yenta_socket *socket = from_timer(socket, t, poll_timer); 541 542 yenta_interrupt(0, (void *)socket); 543 socket->poll_timer.expires = jiffies + HZ; 544 add_timer(&socket->poll_timer); 545 } 546 547 static void yenta_clear_maps(struct yenta_socket *socket) 548 { 549 int i; 550 struct resource res = { .start = 0, .end = 0x0fff }; 551 pccard_io_map io = { 0, 0, 0, 0, 1 }; 552 pccard_mem_map mem = { .res = &res, }; 553 554 yenta_set_socket(&socket->socket, &dead_socket); 555 for (i = 0; i < 2; i++) { 556 io.map = i; 557 yenta_set_io_map(&socket->socket, &io); 558 } 559 for (i = 0; i < 5; i++) { 560 mem.map = i; 561 yenta_set_mem_map(&socket->socket, &mem); 562 } 563 } 564 565 /* redoes voltage interrogation if required */ 566 static void yenta_interrogate(struct yenta_socket *socket) 567 { 568 u32 state; 569 570 state = cb_readl(socket, CB_SOCKET_STATE); 571 if (!(state & (CB_5VCARD | CB_3VCARD | CB_XVCARD | CB_YVCARD)) || 572 (state & (CB_CDETECT1 | CB_CDETECT2 | CB_NOTACARD | CB_BADVCCREQ)) || 573 ((state & (CB_16BITCARD | CB_CBCARD)) == (CB_16BITCARD | CB_CBCARD))) 574 cb_writel(socket, CB_SOCKET_FORCE, CB_CVSTEST); 575 } 576 577 /* Called at resume and initialization events */ 578 static int yenta_sock_init(struct pcmcia_socket *sock) 579 { 580 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 581 582 exca_writeb(socket, I365_GBLCTL, 0x00); 583 exca_writeb(socket, I365_GENCTL, 0x00); 584 585 /* Redo card voltage interrogation */ 586 yenta_interrogate(socket); 587 588 yenta_clear_maps(socket); 589 590 if (socket->type && socket->type->sock_init) 591 socket->type->sock_init(socket); 592 593 /* Re-enable CSC interrupts */ 594 cb_writel(socket, CB_SOCKET_MASK, CB_CDMASK); 595 596 return 0; 597 } 598 599 static int yenta_sock_suspend(struct pcmcia_socket *sock) 600 { 601 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 602 603 /* Disable CSC interrupts */ 604 cb_writel(socket, CB_SOCKET_MASK, 0x0); 605 606 return 0; 607 } 608 609 /* 610 * Use an adaptive allocation for the memory resource, 611 * sometimes the memory behind pci bridges is limited: 612 * 1/8 of the size of the io window of the parent. 613 * max 4 MB, min 16 kB. We try very hard to not get below 614 * the "ACC" values, though. 615 */ 616 #define BRIDGE_MEM_MAX (4*1024*1024) 617 #define BRIDGE_MEM_ACC (128*1024) 618 #define BRIDGE_MEM_MIN (16*1024) 619 620 #define BRIDGE_IO_MAX 512 621 #define BRIDGE_IO_ACC 256 622 #define BRIDGE_IO_MIN 32 623 624 #ifndef PCIBIOS_MIN_CARDBUS_IO 625 #define PCIBIOS_MIN_CARDBUS_IO PCIBIOS_MIN_IO 626 #endif 627 628 static int yenta_search_one_res(struct resource *root, struct resource *res, 629 u32 min) 630 { 631 u32 align, size, start, end; 632 633 if (res->flags & IORESOURCE_IO) { 634 align = 1024; 635 size = BRIDGE_IO_MAX; 636 start = PCIBIOS_MIN_CARDBUS_IO; 637 end = ~0U; 638 } else { 639 unsigned long avail = root->end - root->start; 640 int i; 641 size = BRIDGE_MEM_MAX; 642 if (size > avail/8) { 643 size = (avail+1)/8; 644 /* round size down to next power of 2 */ 645 i = 0; 646 while ((size /= 2) != 0) 647 i++; 648 size = 1 << i; 649 } 650 if (size < min) 651 size = min; 652 align = size; 653 start = PCIBIOS_MIN_MEM; 654 end = ~0U; 655 } 656 657 do { 658 if (allocate_resource(root, res, size, start, end, align, 659 NULL, NULL) == 0) { 660 return 1; 661 } 662 size = size/2; 663 align = size; 664 } while (size >= min); 665 666 return 0; 667 } 668 669 670 static int yenta_search_res(struct yenta_socket *socket, struct resource *res, 671 u32 min) 672 { 673 struct resource *root; 674 int i; 675 676 pci_bus_for_each_resource(socket->dev->bus, root, i) { 677 if (!root) 678 continue; 679 680 if ((res->flags ^ root->flags) & 681 (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH)) 682 continue; /* Wrong type */ 683 684 if (yenta_search_one_res(root, res, min)) 685 return 1; 686 } 687 return 0; 688 } 689 690 static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type, int addr_start, int addr_end) 691 { 692 struct pci_dev *dev = socket->dev; 693 struct resource *res; 694 struct pci_bus_region region; 695 unsigned mask; 696 697 res = dev->resource + PCI_BRIDGE_RESOURCES + nr; 698 /* Already allocated? */ 699 if (res->parent) 700 return 0; 701 702 /* The granularity of the memory limit is 4kB, on IO it's 4 bytes */ 703 mask = ~0xfff; 704 if (type & IORESOURCE_IO) 705 mask = ~3; 706 707 res->name = dev->subordinate->name; 708 res->flags = type; 709 710 region.start = config_readl(socket, addr_start) & mask; 711 region.end = config_readl(socket, addr_end) | ~mask; 712 if (region.start && region.end > region.start && !override_bios) { 713 pcibios_bus_to_resource(dev->bus, res, ®ion); 714 if (pci_claim_resource(dev, PCI_BRIDGE_RESOURCES + nr) == 0) 715 return 0; 716 dev_info(&dev->dev, 717 "Preassigned resource %d busy or not available, reconfiguring...\n", 718 nr); 719 } 720 721 if (type & IORESOURCE_IO) { 722 if ((yenta_search_res(socket, res, BRIDGE_IO_MAX)) || 723 (yenta_search_res(socket, res, BRIDGE_IO_ACC)) || 724 (yenta_search_res(socket, res, BRIDGE_IO_MIN))) 725 return 1; 726 } else { 727 if (type & IORESOURCE_PREFETCH) { 728 if ((yenta_search_res(socket, res, BRIDGE_MEM_MAX)) || 729 (yenta_search_res(socket, res, BRIDGE_MEM_ACC)) || 730 (yenta_search_res(socket, res, BRIDGE_MEM_MIN))) 731 return 1; 732 /* Approximating prefetchable by non-prefetchable */ 733 res->flags = IORESOURCE_MEM; 734 } 735 if ((yenta_search_res(socket, res, BRIDGE_MEM_MAX)) || 736 (yenta_search_res(socket, res, BRIDGE_MEM_ACC)) || 737 (yenta_search_res(socket, res, BRIDGE_MEM_MIN))) 738 return 1; 739 } 740 741 dev_info(&dev->dev, 742 "no resource of type %x available, trying to continue...\n", 743 type); 744 res->start = res->end = res->flags = 0; 745 return 0; 746 } 747 748 /* 749 * Allocate the bridge mappings for the device.. 750 */ 751 static void yenta_allocate_resources(struct yenta_socket *socket) 752 { 753 int program = 0; 754 program += yenta_allocate_res(socket, 0, IORESOURCE_IO, 755 PCI_CB_IO_BASE_0, PCI_CB_IO_LIMIT_0); 756 program += yenta_allocate_res(socket, 1, IORESOURCE_IO, 757 PCI_CB_IO_BASE_1, PCI_CB_IO_LIMIT_1); 758 program += yenta_allocate_res(socket, 2, IORESOURCE_MEM|IORESOURCE_PREFETCH, 759 PCI_CB_MEMORY_BASE_0, PCI_CB_MEMORY_LIMIT_0); 760 program += yenta_allocate_res(socket, 3, IORESOURCE_MEM, 761 PCI_CB_MEMORY_BASE_1, PCI_CB_MEMORY_LIMIT_1); 762 if (program) 763 pci_setup_cardbus(socket->dev->subordinate); 764 } 765 766 767 /* 768 * Free the bridge mappings for the device.. 769 */ 770 static void yenta_free_resources(struct yenta_socket *socket) 771 { 772 int i; 773 for (i = 0; i < 4; i++) { 774 struct resource *res; 775 res = socket->dev->resource + PCI_BRIDGE_RESOURCES + i; 776 if (res->start != 0 && res->end != 0) 777 release_resource(res); 778 res->start = res->end = res->flags = 0; 779 } 780 } 781 782 783 /* 784 * Close it down - release our resources and go home.. 785 */ 786 static void yenta_close(struct pci_dev *dev) 787 { 788 struct yenta_socket *sock = pci_get_drvdata(dev); 789 790 /* Remove the register attributes */ 791 device_remove_file(&dev->dev, &dev_attr_yenta_registers); 792 793 /* we don't want a dying socket registered */ 794 pcmcia_unregister_socket(&sock->socket); 795 796 /* Disable all events so we don't die in an IRQ storm */ 797 cb_writel(sock, CB_SOCKET_MASK, 0x0); 798 exca_writeb(sock, I365_CSCINT, 0); 799 800 if (sock->cb_irq) 801 free_irq(sock->cb_irq, sock); 802 else 803 del_timer_sync(&sock->poll_timer); 804 805 iounmap(sock->base); 806 yenta_free_resources(sock); 807 808 pci_release_regions(dev); 809 pci_disable_device(dev); 810 pci_set_drvdata(dev, NULL); 811 kfree(sock); 812 } 813 814 815 static struct pccard_operations yenta_socket_operations = { 816 .init = yenta_sock_init, 817 .suspend = yenta_sock_suspend, 818 .get_status = yenta_get_status, 819 .set_socket = yenta_set_socket, 820 .set_io_map = yenta_set_io_map, 821 .set_mem_map = yenta_set_mem_map, 822 }; 823 824 825 #ifdef CONFIG_YENTA_TI 826 #include "ti113x.h" 827 #endif 828 #ifdef CONFIG_YENTA_RICOH 829 #include "ricoh.h" 830 #endif 831 #ifdef CONFIG_YENTA_TOSHIBA 832 #include "topic.h" 833 #endif 834 #ifdef CONFIG_YENTA_O2 835 #include "o2micro.h" 836 #endif 837 838 enum { 839 CARDBUS_TYPE_DEFAULT = -1, 840 CARDBUS_TYPE_TI, 841 CARDBUS_TYPE_TI113X, 842 CARDBUS_TYPE_TI12XX, 843 CARDBUS_TYPE_TI1250, 844 CARDBUS_TYPE_RICOH, 845 CARDBUS_TYPE_TOPIC95, 846 CARDBUS_TYPE_TOPIC97, 847 CARDBUS_TYPE_O2MICRO, 848 CARDBUS_TYPE_ENE, 849 }; 850 851 /* 852 * Different cardbus controllers have slightly different 853 * initialization sequences etc details. List them here.. 854 */ 855 static struct cardbus_type cardbus_type[] = { 856 #ifdef CONFIG_YENTA_TI 857 [CARDBUS_TYPE_TI] = { 858 .override = ti_override, 859 .save_state = ti_save_state, 860 .restore_state = ti_restore_state, 861 .sock_init = ti_init, 862 }, 863 [CARDBUS_TYPE_TI113X] = { 864 .override = ti113x_override, 865 .save_state = ti_save_state, 866 .restore_state = ti_restore_state, 867 .sock_init = ti_init, 868 }, 869 [CARDBUS_TYPE_TI12XX] = { 870 .override = ti12xx_override, 871 .save_state = ti_save_state, 872 .restore_state = ti_restore_state, 873 .sock_init = ti_init, 874 }, 875 [CARDBUS_TYPE_TI1250] = { 876 .override = ti1250_override, 877 .save_state = ti_save_state, 878 .restore_state = ti_restore_state, 879 .sock_init = ti_init, 880 }, 881 [CARDBUS_TYPE_ENE] = { 882 .override = ene_override, 883 .save_state = ti_save_state, 884 .restore_state = ti_restore_state, 885 .sock_init = ti_init, 886 }, 887 #endif 888 #ifdef CONFIG_YENTA_RICOH 889 [CARDBUS_TYPE_RICOH] = { 890 .override = ricoh_override, 891 .save_state = ricoh_save_state, 892 .restore_state = ricoh_restore_state, 893 }, 894 #endif 895 #ifdef CONFIG_YENTA_TOSHIBA 896 [CARDBUS_TYPE_TOPIC95] = { 897 .override = topic95_override, 898 }, 899 [CARDBUS_TYPE_TOPIC97] = { 900 .override = topic97_override, 901 }, 902 #endif 903 #ifdef CONFIG_YENTA_O2 904 [CARDBUS_TYPE_O2MICRO] = { 905 .override = o2micro_override, 906 .restore_state = o2micro_restore_state, 907 }, 908 #endif 909 }; 910 911 912 static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mask) 913 { 914 int i; 915 unsigned long val; 916 u32 mask; 917 u8 reg; 918 919 /* 920 * Probe for usable interrupts using the force 921 * register to generate bogus card status events. 922 */ 923 cb_writel(socket, CB_SOCKET_EVENT, -1); 924 cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK); 925 reg = exca_readb(socket, I365_CSCINT); 926 exca_writeb(socket, I365_CSCINT, 0); 927 val = probe_irq_on() & isa_irq_mask; 928 for (i = 1; i < 16; i++) { 929 if (!((val >> i) & 1)) 930 continue; 931 exca_writeb(socket, I365_CSCINT, I365_CSC_STSCHG | (i << 4)); 932 cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS); 933 udelay(100); 934 cb_writel(socket, CB_SOCKET_EVENT, -1); 935 } 936 cb_writel(socket, CB_SOCKET_MASK, 0); 937 exca_writeb(socket, I365_CSCINT, reg); 938 939 mask = probe_irq_mask(val) & 0xffff; 940 941 return mask; 942 } 943 944 945 /* 946 * yenta PCI irq probing. 947 * currently only used in the TI/EnE initialization code 948 */ 949 #ifdef CONFIG_YENTA_TI 950 951 /* interrupt handler, only used during probing */ 952 static irqreturn_t yenta_probe_handler(int irq, void *dev_id) 953 { 954 struct yenta_socket *socket = (struct yenta_socket *) dev_id; 955 u8 csc; 956 u32 cb_event; 957 958 /* Clear interrupt status for the event */ 959 cb_event = cb_readl(socket, CB_SOCKET_EVENT); 960 cb_writel(socket, CB_SOCKET_EVENT, -1); 961 csc = exca_readb(socket, I365_CSC); 962 963 if (cb_event || csc) { 964 socket->probe_status = 1; 965 return IRQ_HANDLED; 966 } 967 968 return IRQ_NONE; 969 } 970 971 /* probes the PCI interrupt, use only on override functions */ 972 static int yenta_probe_cb_irq(struct yenta_socket *socket) 973 { 974 u8 reg = 0; 975 976 if (!socket->cb_irq) 977 return -1; 978 979 socket->probe_status = 0; 980 981 if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) { 982 dev_warn(&socket->dev->dev, 983 "request_irq() in yenta_probe_cb_irq() failed!\n"); 984 return -1; 985 } 986 987 /* generate interrupt, wait */ 988 if (!socket->dev->irq) 989 reg = exca_readb(socket, I365_CSCINT); 990 exca_writeb(socket, I365_CSCINT, reg | I365_CSC_STSCHG); 991 cb_writel(socket, CB_SOCKET_EVENT, -1); 992 cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK); 993 cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS); 994 995 msleep(100); 996 997 /* disable interrupts */ 998 cb_writel(socket, CB_SOCKET_MASK, 0); 999 exca_writeb(socket, I365_CSCINT, reg); 1000 cb_writel(socket, CB_SOCKET_EVENT, -1); 1001 exca_readb(socket, I365_CSC); 1002 1003 free_irq(socket->cb_irq, socket); 1004 1005 return (int) socket->probe_status; 1006 } 1007 1008 #endif /* CONFIG_YENTA_TI */ 1009 1010 1011 /* 1012 * Set static data that doesn't need re-initializing.. 1013 */ 1014 static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_irq_mask) 1015 { 1016 socket->socket.pci_irq = socket->cb_irq; 1017 if (isa_probe) 1018 socket->socket.irq_mask = yenta_probe_irq(socket, isa_irq_mask); 1019 else 1020 socket->socket.irq_mask = 0; 1021 1022 dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n", 1023 socket->socket.irq_mask, socket->cb_irq); 1024 } 1025 1026 /* 1027 * Initialize the standard cardbus registers 1028 */ 1029 static void yenta_config_init(struct yenta_socket *socket) 1030 { 1031 u16 bridge; 1032 struct pci_dev *dev = socket->dev; 1033 struct pci_bus_region region; 1034 1035 pcibios_resource_to_bus(socket->dev->bus, ®ion, &dev->resource[0]); 1036 1037 config_writel(socket, CB_LEGACY_MODE_BASE, 0); 1038 config_writel(socket, PCI_BASE_ADDRESS_0, region.start); 1039 config_writew(socket, PCI_COMMAND, 1040 PCI_COMMAND_IO | 1041 PCI_COMMAND_MEMORY | 1042 PCI_COMMAND_MASTER | 1043 PCI_COMMAND_WAIT); 1044 1045 /* MAGIC NUMBERS! Fixme */ 1046 config_writeb(socket, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES / 4); 1047 config_writeb(socket, PCI_LATENCY_TIMER, 168); 1048 config_writel(socket, PCI_PRIMARY_BUS, 1049 (176 << 24) | /* sec. latency timer */ 1050 ((unsigned int)dev->subordinate->busn_res.end << 16) | /* subordinate bus */ 1051 ((unsigned int)dev->subordinate->busn_res.start << 8) | /* secondary bus */ 1052 dev->subordinate->primary); /* primary bus */ 1053 1054 /* 1055 * Set up the bridging state: 1056 * - enable write posting. 1057 * - memory window 0 prefetchable, window 1 non-prefetchable 1058 * - PCI interrupts enabled if a PCI interrupt exists.. 1059 */ 1060 bridge = config_readw(socket, CB_BRIDGE_CONTROL); 1061 bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN); 1062 bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN; 1063 config_writew(socket, CB_BRIDGE_CONTROL, bridge); 1064 } 1065 1066 /** 1067 * yenta_fixup_parent_bridge - Fix subordinate bus# of the parent bridge 1068 * @cardbus_bridge: The PCI bus which the CardBus bridge bridges to 1069 * 1070 * Checks if devices on the bus which the CardBus bridge bridges to would be 1071 * invisible during PCI scans because of a misconfigured subordinate number 1072 * of the parent brige - some BIOSes seem to be too lazy to set it right. 1073 * Does the fixup carefully by checking how far it can go without conflicts. 1074 * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. 1075 */ 1076 static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) 1077 { 1078 struct pci_bus *sibling; 1079 unsigned char upper_limit; 1080 /* 1081 * We only check and fix the parent bridge: All systems which need 1082 * this fixup that have been reviewed are laptops and the only bridge 1083 * which needed fixing was the parent bridge of the CardBus bridge: 1084 */ 1085 struct pci_bus *bridge_to_fix = cardbus_bridge->parent; 1086 1087 /* Check bus numbers are already set up correctly: */ 1088 if (bridge_to_fix->busn_res.end >= cardbus_bridge->busn_res.end) 1089 return; /* The subordinate number is ok, nothing to do */ 1090 1091 if (!bridge_to_fix->parent) 1092 return; /* Root bridges are ok */ 1093 1094 /* stay within the limits of the bus range of the parent: */ 1095 upper_limit = bridge_to_fix->parent->busn_res.end; 1096 1097 /* check the bus ranges of all sibling bridges to prevent overlap */ 1098 list_for_each_entry(sibling, &bridge_to_fix->parent->children, 1099 node) { 1100 /* 1101 * If the sibling has a higher secondary bus number 1102 * and it's secondary is equal or smaller than our 1103 * current upper limit, set the new upper limit to 1104 * the bus number below the sibling's range: 1105 */ 1106 if (sibling->busn_res.start > bridge_to_fix->busn_res.end 1107 && sibling->busn_res.start <= upper_limit) 1108 upper_limit = sibling->busn_res.start - 1; 1109 } 1110 1111 /* Show that the wanted subordinate number is not possible: */ 1112 if (cardbus_bridge->busn_res.end > upper_limit) 1113 dev_warn(&cardbus_bridge->dev, 1114 "Upper limit for fixing this bridge's parent bridge: #%02x\n", 1115 upper_limit); 1116 1117 /* If we have room to increase the bridge's subordinate number, */ 1118 if (bridge_to_fix->busn_res.end < upper_limit) { 1119 1120 /* use the highest number of the hidden bus, within limits */ 1121 unsigned char subordinate_to_assign = 1122 min_t(int, cardbus_bridge->busn_res.end, upper_limit); 1123 1124 dev_info(&bridge_to_fix->dev, 1125 "Raising subordinate bus# of parent bus (#%02x) from #%02x to #%02x\n", 1126 bridge_to_fix->number, 1127 (int)bridge_to_fix->busn_res.end, 1128 subordinate_to_assign); 1129 1130 /* Save the new subordinate in the bus struct of the bridge */ 1131 bridge_to_fix->busn_res.end = subordinate_to_assign; 1132 1133 /* and update the PCI config space with the new subordinate */ 1134 pci_write_config_byte(bridge_to_fix->self, 1135 PCI_SUBORDINATE_BUS, bridge_to_fix->busn_res.end); 1136 } 1137 } 1138 1139 /* 1140 * Initialize a cardbus controller. Make sure we have a usable 1141 * interrupt, and that we can map the cardbus area. Fill in the 1142 * socket information structure.. 1143 */ 1144 static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id) 1145 { 1146 struct yenta_socket *socket; 1147 int ret; 1148 1149 /* 1150 * If we failed to assign proper bus numbers for this cardbus 1151 * controller during PCI probe, its subordinate pci_bus is NULL. 1152 * Bail out if so. 1153 */ 1154 if (!dev->subordinate) { 1155 dev_err(&dev->dev, "no bus associated! (try 'pci=assign-busses')\n"); 1156 return -ENODEV; 1157 } 1158 1159 socket = kzalloc(sizeof(struct yenta_socket), GFP_KERNEL); 1160 if (!socket) 1161 return -ENOMEM; 1162 1163 /* prepare pcmcia_socket */ 1164 socket->socket.ops = ¥ta_socket_operations; 1165 socket->socket.resource_ops = &pccard_nonstatic_ops; 1166 socket->socket.dev.parent = &dev->dev; 1167 socket->socket.driver_data = socket; 1168 socket->socket.owner = THIS_MODULE; 1169 socket->socket.features = SS_CAP_PAGE_REGS | SS_CAP_PCCARD; 1170 socket->socket.map_size = 0x1000; 1171 socket->socket.cb_dev = dev; 1172 1173 /* prepare struct yenta_socket */ 1174 socket->dev = dev; 1175 pci_set_drvdata(dev, socket); 1176 1177 /* 1178 * Do some basic sanity checking.. 1179 */ 1180 if (pci_enable_device(dev)) { 1181 ret = -EBUSY; 1182 goto free; 1183 } 1184 1185 ret = pci_request_regions(dev, "yenta_socket"); 1186 if (ret) 1187 goto disable; 1188 1189 if (!pci_resource_start(dev, 0)) { 1190 dev_err(&dev->dev, "No cardbus resource!\n"); 1191 ret = -ENODEV; 1192 goto release; 1193 } 1194 1195 /* 1196 * Ok, start setup.. Map the cardbus registers, 1197 * and request the IRQ. 1198 */ 1199 socket->base = ioremap(pci_resource_start(dev, 0), 0x1000); 1200 if (!socket->base) { 1201 ret = -ENOMEM; 1202 goto release; 1203 } 1204 1205 /* 1206 * report the subsystem vendor and device for help debugging 1207 * the irq stuff... 1208 */ 1209 dev_info(&dev->dev, "CardBus bridge found [%04x:%04x]\n", 1210 dev->subsystem_vendor, dev->subsystem_device); 1211 1212 yenta_config_init(socket); 1213 1214 /* Disable all events */ 1215 cb_writel(socket, CB_SOCKET_MASK, 0x0); 1216 1217 /* Set up the bridge regions.. */ 1218 yenta_allocate_resources(socket); 1219 1220 socket->cb_irq = dev->irq; 1221 1222 /* Do we have special options for the device? */ 1223 if (id->driver_data != CARDBUS_TYPE_DEFAULT && 1224 id->driver_data < ARRAY_SIZE(cardbus_type)) { 1225 socket->type = &cardbus_type[id->driver_data]; 1226 1227 ret = socket->type->override(socket); 1228 if (ret < 0) 1229 goto unmap; 1230 } 1231 1232 /* We must finish initialization here */ 1233 1234 if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) { 1235 /* No IRQ or request_irq failed. Poll */ 1236 socket->cb_irq = 0; /* But zero is a valid IRQ number. */ 1237 timer_setup(&socket->poll_timer, yenta_interrupt_wrapper, 0); 1238 mod_timer(&socket->poll_timer, jiffies + HZ); 1239 dev_info(&dev->dev, 1240 "no PCI IRQ, CardBus support disabled for this socket.\n"); 1241 dev_info(&dev->dev, 1242 "check your BIOS CardBus, BIOS IRQ or ACPI settings.\n"); 1243 } else { 1244 socket->socket.features |= SS_CAP_CARDBUS; 1245 } 1246 1247 /* Figure out what the dang thing can do for the PCMCIA layer... */ 1248 yenta_interrogate(socket); 1249 yenta_get_socket_capabilities(socket, isa_interrupts); 1250 dev_info(&dev->dev, "Socket status: %08x\n", 1251 cb_readl(socket, CB_SOCKET_STATE)); 1252 1253 yenta_fixup_parent_bridge(dev->subordinate); 1254 1255 /* Register it with the pcmcia layer.. */ 1256 ret = pcmcia_register_socket(&socket->socket); 1257 if (ret) 1258 goto free_irq; 1259 1260 /* Add the yenta register attributes */ 1261 ret = device_create_file(&dev->dev, &dev_attr_yenta_registers); 1262 if (ret) 1263 goto unregister_socket; 1264 1265 return ret; 1266 1267 /* error path... */ 1268 unregister_socket: 1269 pcmcia_unregister_socket(&socket->socket); 1270 free_irq: 1271 if (socket->cb_irq) 1272 free_irq(socket->cb_irq, socket); 1273 else 1274 del_timer_sync(&socket->poll_timer); 1275 unmap: 1276 iounmap(socket->base); 1277 yenta_free_resources(socket); 1278 release: 1279 pci_release_regions(dev); 1280 disable: 1281 pci_disable_device(dev); 1282 free: 1283 pci_set_drvdata(dev, NULL); 1284 kfree(socket); 1285 return ret; 1286 } 1287 1288 #ifdef CONFIG_PM 1289 static int yenta_dev_suspend_noirq(struct device *dev) 1290 { 1291 struct pci_dev *pdev = to_pci_dev(dev); 1292 struct yenta_socket *socket = pci_get_drvdata(pdev); 1293 1294 if (!socket) 1295 return 0; 1296 1297 if (socket->type && socket->type->save_state) 1298 socket->type->save_state(socket); 1299 1300 pci_save_state(pdev); 1301 pci_read_config_dword(pdev, 16*4, &socket->saved_state[0]); 1302 pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]); 1303 pci_disable_device(pdev); 1304 1305 return 0; 1306 } 1307 1308 static int yenta_dev_resume_noirq(struct device *dev) 1309 { 1310 struct pci_dev *pdev = to_pci_dev(dev); 1311 struct yenta_socket *socket = pci_get_drvdata(pdev); 1312 int ret; 1313 1314 if (!socket) 1315 return 0; 1316 1317 pci_write_config_dword(pdev, 16*4, socket->saved_state[0]); 1318 pci_write_config_dword(pdev, 17*4, socket->saved_state[1]); 1319 1320 ret = pci_enable_device(pdev); 1321 if (ret) 1322 return ret; 1323 1324 pci_set_master(pdev); 1325 1326 if (socket->type && socket->type->restore_state) 1327 socket->type->restore_state(socket); 1328 1329 return 0; 1330 } 1331 1332 static const struct dev_pm_ops yenta_pm_ops = { 1333 .suspend_noirq = yenta_dev_suspend_noirq, 1334 .resume_noirq = yenta_dev_resume_noirq, 1335 .freeze_noirq = yenta_dev_suspend_noirq, 1336 .thaw_noirq = yenta_dev_resume_noirq, 1337 .poweroff_noirq = yenta_dev_suspend_noirq, 1338 .restore_noirq = yenta_dev_resume_noirq, 1339 }; 1340 1341 #define YENTA_PM_OPS (¥ta_pm_ops) 1342 #else 1343 #define YENTA_PM_OPS NULL 1344 #endif 1345 1346 #define CB_ID(vend, dev, type) \ 1347 { \ 1348 .vendor = vend, \ 1349 .device = dev, \ 1350 .subvendor = PCI_ANY_ID, \ 1351 .subdevice = PCI_ANY_ID, \ 1352 .class = PCI_CLASS_BRIDGE_CARDBUS << 8, \ 1353 .class_mask = ~0, \ 1354 .driver_data = CARDBUS_TYPE_##type, \ 1355 } 1356 1357 static const struct pci_device_id yenta_table[] = { 1358 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1031, TI), 1359 1360 /* 1361 * TBD: Check if these TI variants can use more 1362 * advanced overrides instead. (I can't get the 1363 * data sheets for these devices. --rmk) 1364 */ 1365 #ifdef CONFIG_YENTA_TI 1366 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1210, TI), 1367 1368 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1130, TI113X), 1369 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1131, TI113X), 1370 1371 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1211, TI12XX), 1372 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1220, TI12XX), 1373 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1221, TI12XX), 1374 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1225, TI12XX), 1375 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1251A, TI12XX), 1376 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1251B, TI12XX), 1377 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, TI12XX), 1378 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1450, TI12XX), 1379 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1451A, TI12XX), 1380 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1510, TI12XX), 1381 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520, TI12XX), 1382 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1620, TI12XX), 1383 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4410, TI12XX), 1384 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4450, TI12XX), 1385 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4451, TI12XX), 1386 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4510, TI12XX), 1387 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4520, TI12XX), 1388 1389 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250), 1390 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250), 1391 1392 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX21_XX11, TI12XX), 1393 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X515, TI12XX), 1394 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX12, TI12XX), 1395 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X420, TI12XX), 1396 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X620, TI12XX), 1397 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7410, TI12XX), 1398 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7510, TI12XX), 1399 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7610, TI12XX), 1400 1401 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_710, ENE), 1402 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_712, ENE), 1403 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_720, ENE), 1404 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_722, ENE), 1405 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE), 1406 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE), 1407 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE), 1408 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE), 1409 #endif /* CONFIG_YENTA_TI */ 1410 1411 #ifdef CONFIG_YENTA_RICOH 1412 CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH), 1413 CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH), 1414 CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C475, RICOH), 1415 CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, RICOH), 1416 CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C478, RICOH), 1417 #endif 1418 1419 #ifdef CONFIG_YENTA_TOSHIBA 1420 CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC95, TOPIC95), 1421 CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC97, TOPIC97), 1422 CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC100, TOPIC97), 1423 #endif 1424 1425 #ifdef CONFIG_YENTA_O2 1426 CB_ID(PCI_VENDOR_ID_O2, PCI_ANY_ID, O2MICRO), 1427 #endif 1428 1429 /* match any cardbus bridge */ 1430 CB_ID(PCI_ANY_ID, PCI_ANY_ID, DEFAULT), 1431 { /* all zeroes */ } 1432 }; 1433 MODULE_DEVICE_TABLE(pci, yenta_table); 1434 1435 1436 static struct pci_driver yenta_cardbus_driver = { 1437 .name = "yenta_cardbus", 1438 .id_table = yenta_table, 1439 .probe = yenta_probe, 1440 .remove = yenta_close, 1441 .driver.pm = YENTA_PM_OPS, 1442 }; 1443 1444 module_pci_driver(yenta_cardbus_driver); 1445 1446 MODULE_LICENSE("GPL"); 1447